How do I bypass the MSAccess autoexec macro and startup form for a deep-legacy code upgrade of a large MS Access 2003 application with hundreds of forms and reports?
It is an upgrade from Access 2003 to Access 2016, 2019 or 365.
This is a mission critical system kept alive and on crutches for 15 years without any VBA code updates.
Files in the application
Multiple MSAccess files in MDB and ACCDB format
No MSAccess files in MDE or ACCDE formats with compiled VBA code
No MSAccess other files wuch as mdw security files
I run a dos command for the database - PATH_TO_MSACCESS.exe DB_NAME.mdb
I'm using MSAccess.exe 32 bit from Office 365.
Note that there are compatibility and VBA compiler errors if you run on a 64 bit MSAccess.exe if the VBA calls Windows operating system Win32 API methods. This app calls a few (5) Win32 API calls. Technical, MS Access 64 bit will treat some 32 bit data sent in/returned from the Win32 API as 64 bit causing errors.
The most difficult part is that many of the web pages and nearly all Microsoft pages related to this have been deleted from the web.
Tried but did not work
Holding down shift key when you open the MSAccess database
Hitting F11 to open the Navigation Pane in Access (does not open). If Navigation Pane opens I could edit the AutoExec macro or the startup form's Form_Open code
Tried, not perfect, and works
Run a macro which does not exist on MSAccess.exe command line, hit escape multiple times on the error messages, the click on the MSAccess ribbon to get to the VBA code. Messy, but it gets me into the VBA code.
Added a "Stop" as the first line of the macro named "autoexec" and also as the first line of the startup form's "Form_Open()" method. I had to add an empty "Form_Open()" event handler for the form
Current status:
The application runs OK on a machine with MS Access version before 2016
It fails multiple ways when only 32 bit MS Access 365/2019 is installed on the machine.
I have been finding and fixing things like bad configuration file entries, incorrect installation path, etc. but need to debug the VBA startup code and initial form load in the VBA debugger.
I cannot directly get into the VBA debugger on the first line of the AutoExec macro or start up form's Form_Open function. MSAccess always runs the autoexec macro and shows the startup form.
I can get into the VBA by running MSaccess.exe command line and specifying that it runs a macro which does not exist.
Here are possible solutions based on Google searching broken out by Access version since the code/database settings in question could be specific to any Access version from 95 to 2010.
Access 2007: Opening an MS-Access database from the command line without running any of the startup vba code?
Hold down shift key when opening MDB database
Access XP
Open access database without executing scripts or forms
Hold down shift key when opening the Access database
Remove AutoExec macro
Remove the startup form setting from the database
Access 2007:
Emulating a SHIFT key press when using VBA to open an ms-access database secured by an mdw file?
Slightly different case where the Access database is secured by a MDW security file
Same answers
Access XP/2003/2007?
How to skip Autoexec macro when opening MSAccess from MSAccess?
Method One:
Original URL is dead, Internet Archive Wayback machine has an archived copy: https://web.archive.org/web/20101204113950/http://www.mvps.org/access/api/api0068.htm
Send Shift key to Access via code to bypass startup macro if the [AllowbypassKey] is not set
Method Two:
Extract the Autoexec macro from the database, replace it with a blank AutoExec macro
Uses DoCmd.DatabaseTransfer acImport and DoCmd.DatabaseTransfer acExport
Method Three:
Rename the AutoExec macro using VBA code
OpenCurrentDatabase ("Your database")
DoCmd.Rename "Autoexec", acMacro, "tmp_Autoexec"
CloseCurrentDatabase
MS Access keyboard short cuts for getting at the VBA code or objects in an Access database. From https://support.microsoft.com/en-us/office/keyboard-shortcuts-for-access-70a673e4-4f7b-4300-b8e5-3320fa6606e2
I haven't tried the MSAccess keyboard short cuts to see if they let me open and view the Access VBA code, toolbars, table/form dedign viewer, or switch to code editing mode. I've included them here for completeness.
F2 - Switch between Edit mode (with insertion point displayed) and Navigation mode in the Datasheet or Design view
F4 - Open properties pane for an object
F5 - Switch to Form view from the form Design view
F6 - Switch between panes in the MS Access interface
F10 (?) unhide the ribbon
F11 - Show or hide the Navigation Pane
Alt-X, Alt-X,1 - Open the External Data tab in the ribbon
Alt-Y - Open the Database Tools tab in the ribbon
Alt-J,T - Open the Table tab in the ribbon
Alt-X,2 - Open the Add-ins tab in the ribbon
Control-F1 - Expand/collapse the ribbon
Alt-F11 - Switch to/from the VBA editor
Show or hide the MSAccess ribbon toolbar in VBA code. Included here for completeness. This application hides the ribbon bar on application startup.
MSAccess - Minimize the Toolbar Ribbon OnLoad()?
MSAccess 2010 onwards. The acToolbarNo is in the VBA code for this application
DoCmd.ShowToolbar "Ribbon", acToolbarNo 'Hides the full toolbar
DoCmd.ShowToolbar "Ribbon", acToolbarYes 'Show
MSACcess 2010, 2013
CommandBars.ExecuteMso "MinimizeRibbon"
Before MSAccess 2010
SendKeys "^{F1}", False
Special case: You may get an error on the Access startup form if it has a record source which has an error. this is not the case for my application but included here completeness
difficulty tracing microsoft access VBA code
Special case: You get an infinite loop of dialog prompts or errors from the startup form. Hold down the "Control-Break" key while clicking on OK for the error message to break out of the loop of errors. https://bettersolutions.com/vba/debugging/index.htm
It may be possible to break out of the main startup form to the MS Access object explorer by right clicking on the startup form's title bar or right click on the startup form's body.
Right clicking on the startup form's title bar has these menu commands
Save
Close and Close All
Form View
Layout View
Design View
Right clicking on the startup form's body has these menu commands
Form View
Layout View
Design View
Cut, Copy, Past (disabled)
Form Properties (disabled)
Properties (disabled)
Close
the other thing to check? Are you using a shortcut? if it has the /runtime swtich in it, then the shift key will be ignored NO MATTER what you do, and even if no shfit key by-pass code (to disable) shift key means the shift key will STILL be ignored. So, you want to ensure that you not launching/using a shortcut.
you also want to check/ensure/find out/be aware if the application has workgroup security. Again, in 99 out of 100 cases, the shortcut will show this.
next up:
is this a mdb, or mde file? The mde file is a compiled version. No source code exists, and you can't modify the mde. So, again, ensure that you have a mdb file for the front end, not a mde. If you don't have that mdb, then you are in big trouble - you don't have the source code.
You have all this info in your post, but you leave out the most important issues.
So, is this a mde, or mdb? You need to know this.
Is there a worgroup security file (mdw) specifed in the link that is typical used to launch the application. If workgroup secuirty is involed, then the logon id you use might get you past shift key, but then that user might not have been given design rights, so at that point, shify key by-pass will be of zero use to get into the code.
I mean, launch your copy of access 2016 or whatever. Then try to import the objects from that database. This way you don't have to use or ever worry about shfit key, but are doing a simple import of the forms, reports and code into a brand new fresh database.
So, another question:
Don't bother launching the application - create a blank new database, and then import from the existing - can you do this? (doing this does NOT copy the shift key setting of the original database).
MSAccess command line lets you tell it what macro to execute on startup.
I ran the following cmd.exe command line which generates multiple errors and allows you to get into the Access database with the navigator and get into the VBA code. Not the best solution but one possibility.
MSAccess.exe DB /X ADEEERETDEREAR
DB is the full path to the Access database
ADEERETDEREAR is a macro which does not exist
Access 2007?
How to disable Macro and Start-Up values while opening the MS Access DB
Access 2003?
Bypasss shift key. These link to Zip files projects available for download
https://web.archive.org/web/20071214172548/http://www.members.shaw.ca/AlbertKallal/msaccess/msaccess.html
https://web.archive.org/web/20071214172548/http://www.members.shaw.ca/AlbertKallal/msaccess/shiftkey.zip
https://web.archive.org/web/20071214172548/http://www.members.shaw.ca/AlbertKallal/msaccess/shiftkey2000.zip
Access 2007:
remove autoexec macro from MS Access 2007
Create new macro and then rename it in the Access UI to autoexec, say yes to the prompt to overwrite the existing AutoExec macro
Access 2010?
Opening an MS-Access database from the command line without running any of the startup vba code?
Access ?
Disable F11 Key in MS Access to prevent opening the Navigation Pane
Open the Access database, let the main form be shown
Hit F11 to show the navigation pane
A guess that one could modify the autoexec macro and/or the startup form from the navigation pane
Access ?
https://bytes.com/topic/access/answers/211664-programatically-set-startup-form
A guess that you could use VBA in one Access database to open the target database
Get the name of the startup form
Change the startup form's name or maybe blank out the startup form's name
VBA code similar to CurrentDB.Properties("StartupForm") = "MyForm"
Another guess would be to blank out the startup form's name in the database properties
Same may work for the autoexec macro
Access 2010?
Reset startup form to nothing in VBA code
Code from 2012 is here: https://www.tek-tips.com/viewthread.cfm?qid=1673392
First way
Dim strOriginalForm as String
Dim db as Database
Sub RemoveStartup()
Set db = OpenDatabase(yourdatabase)
strOriginalForm = db.Properties("StartUpForm")
db.Properties("StartUpForm") = "(none)"
db.Close
set db = Nothing
End Sub
Sub ResetStartup()
Set db = OpenDatabase(yourdatabase)
db.Properties("StartUpForm") = strOriginalForm
db.Close
Set db = Nothing
End Sub
Second way
Set prp = db.CreateProperty("AllowByPassKey", dbBoolean, True)
db.Properties.Append prp
Third way
Delete the property using - database.properties.delete propertyname
A more complete example from the same page exists.
I have not tried to import the Access objects into a new database. (Thanks Albert Kallal for the information)
This would allow me to look at the VBA code. It may not work as a replacement for the original database with all of the settings internal to the database.
How to import the Access objects from another Access database:
https://support.microsoft.com/en-us/office/import-database-objects-into-the-current-access-database-23aea08b-7487-499d-bdce-0c76bedacfdd
Access 365 steps (likely works for Access 2016)
External Data tab in ribbon
Click New Data Source -> From Database -> Access in the Import & Link ribbon group
Get External Data - Access Database window is shown
Browse for the MSAccess database MDB or ACCDB file in the File Name Field
The Import Objects window is shown
Select the tables, queries, forms, reports macros, modules to import
In the Options button dialog, you can select menus, toolbars, etc. to import
Click on OK
For Names duplicated, Access will append a 1,2,3 to the end of an imported object's name
Access 2010?
Reset startup form to nothing in VBA code
Code from 2012 is here: https://www.tek-tips.com/viewthread.cfm?qid=1673392
Fourth way as mentioned above
A more complete example from the same page.
Code from 2012 is here: https://www.tek-tips.com/viewthread.cfm?qid=1673392
Public Sub GetCBs()
Dim db As DAO.Database
Dim strPath As String
Dim startUpform As String
Dim app As Access.Application
Dim custBars As Collection
Dim custShortCutBars As Collection
Dim custNonShortCutBars As Collection
Dim i As Integer
Dim blnAutoexec As Boolean
strPath = GetOpenFile()
'Get the db without opening in application
Set db = getDb(strPath)
'Get startupform
startUpform = getStartUp(db)
'Turn off the start up form
TurnOffStartUp db
'Check for and auto exec. If exists import and replace
If hasAutoexec(db) Then
blnAutoexec = True
ImportAutoExec (strPath)
End If
Set app = New Access.Application
'Open safely
app.OpenCurrentDatabase (strPath)
'Read command bars
Set custBars = getCustBars(app)
Set custShortCutBars = getCustShortCutBars(app)
Set custNonShortCutBars = getCustNonShortCutBars(app)
app.CloseCurrentDatabase
Set db = app.CurrentDb
Set db = getDb(strPath)
'Return start up form
TurnOnStartUp db, startUpform
db.Close
'Return auto exec
If blnAutoexec Then
ReturnAutoExec (strPath)
End If
Debug.Print "all custom bars:"
'All bars
For i = 1 To custBars.Count
Debug.Print custBars(i)
Next i
'Do something with the command bars
Debug.Print "all shortcut bars:"
'Short cut only
For i = 1 To custShortCutBars.Count
Debug.Print custShortCutBars(i)
Next i
'Not short cut
Debug.Print "Non shortCut"
For i = 1 To custNonShortCutBars.Count
Debug.Print custNonShortCutBars(i)
Next i
End Sub
Public Function getDb(strPath As String) As DAO.Database
Set getDb = DBEngine(0).OpenDatabase(strPath)
End Function
Public Function getCustBars(app As Access.Application) As Collection
' all bars
Dim col As New Collection
Dim cb As Object
For Each cb In app.CommandBars
If cb.BuiltIn = False Then
col.Add (cb.Name)
End If
Next cb
Set getCustBars = col
End Function
Public Function getCustShortCutBars(app As Access.Application) As Collection
' only short cut bars
Dim col As New Collection
Dim cb As commandbar
For Each cb In app.CommandBars
If cb.BuiltIn = False Then
If cb.Type = msoBarTypePopup Then
col.Add (cb.Name)
End If
End If
Next cb
Set getCustShortCutBars = col
End Function
Public Function getCustNonShortCutBars(app As Access.Application) As Collection
' Menu bars that are not shortcut bars
Dim col As New Collection
Dim cb As commandbar
For Each cb In app.CommandBars
If cb.BuiltIn = False Then
If cb.Type <> msoBarTypePopup Then
col.Add (cb.Name)
End If
End If
Next cb
Set getCustNonShortCutBars = col
End Function
Public Function getStartUp(db As DAO.Database) As String
Dim prp As DAO.Property
For Each prp In db.Properties
If prp.Name = "startupform" Then
getStartUp = prp.Value
Exit For
End If
Next
End Function
Public Sub TurnOffStartUp(db As DAO.Database)
Dim prp As DAO.Property
For Each prp In db.Properties
If prp.Name = "startupform" Then
prp.Value = "(None)"
Exit For
End If
Next
End Sub
Public Sub TurnOnStartUp(db As DAO.Database, strFrm As String)
Dim prp As DAO.Property
For Each prp In db.Properties
If prp.Name = "startupform" Then
prp.Value = strFrm
Exit For
End If
Next
End Sub
Public Sub ImportAutoExec(strPath As String)
On Error GoTo errLbl
DoCmd.TransferDatabase acImport, "Microsoft Access", strPath, acMacro, "AutoExec", "AutoExecBackup"
DoCmd.TransferDatabase acExport, "Microsoft Access", strPath, acMacro, "TempAutoExec", "AutoExec"
Exit Sub
errLbl:
If Err.Number = 7874 Then
Debug.Print "Auto Exec macro does not exist"
Else
MsgBox Err.Number & " " & Err.Description
End If
End Sub
Public Sub ReturnAutoExec(strPath As String)
On Error GoTo errLbl
DoCmd.TransferDatabase acExport, "Microsoft Access", strPath, acMacro, "AutoExecBackup", "AutoExec"
DoCmd.DeleteObject acMacro, "AutoExecBackup"
Exit Sub
errLbl:
If Err.Number = 7874 Then
Debug.Print "Auto Exec macro does not exist"
Else
MsgBox Err.Number & " " & Err.Description
End If
End Sub
Public Function hasAutoexec(db As DAO.Database) As Boolean
Dim rs As DAO.Recordset
Dim strSql As String
strSql = "SELECT MSysObjects.Name FROM MSysObjects WHERE MSysObjects.Name = 'AutoExec' AND MSysObjects.Type = -32766"
Set rs = db.OpenRecordset(strSql)
If Not (rs.EOF And rs.BOF) Then
hasAutoexec = True
End If
End Function
In an MS Access app I have a main form that has some buttons, one of which is a "Calendar" button.
When this button is clicked, a form that implements some kind of calendar should open.
The problem is that on some clean machines where I deployed this, instead of the calendar opening, an Enter parameter value dialog opens. On 3 other older instances it works without this problem.
On that form there is an unbound control that has default value =Now()
Office version 2013.
Where and how can I look for differences between these machines?
I can add code snippets or print screens to this question if you let me know what part exactly.
UPDATE:
The code in the open form altough before this get's executed the "Enter parameter value" dialog shows.
Private Sub Form_Open(Cancel As Integer)
Dim PrstAnz As Integer
On Error GoTo Form_Open_EH
If DCount("[prst]", "FLMT_AKTPRST") > 1 Then
'Es stehen mehrere Prüfstände zur Auswahl
Me.prst.Visible = True
Me.prst.RowSource = "FLMT_AKTPRST"
End If
Me![prst] = DLookup("[prst]", "FLMT_AKTPRST")
Me![ABeginn] = Date
InitPrst Me![ABeginn]
Exit Sub
All machines are Windows 7 x64 with Office 2013.
It's was about OS culture settings.
I have a desktop application written in VB.net that runs a macro in an access. Recently we upgraded from office 2010 to office 365. Now when i run this application i get this error :
Exception that comes up
Error Image
Could not load file or assembly 'Microsoft.Office.Interop.Acces.Dao,Version =15.0.0.0...' or one of its dependencies'
Below is the code that causes the exception:
If _accessApp Is Nothing Then
_accessApp = New Application
End If
Try
If JobFolderPath.Length <= 0 Or JobFolderPath Is Nothing Then
Exit Sub
End If
If _accessApp.CurrentDb() Is Nothing Then
_accessApp.OpenCurrentDatabase(JobFolderPath & "somedb.mdb", False)
_accessApp.Run("SomeProcess")
Else
_accessApp.Run("SomeProcess")
End If
_accessApp.Quit(AcQuitOption.acQuitSaveNone)
Catch ex As Exception
Finally
_accessApp = Nothing
End Try
I even included teh Interop.Access.Dao verion 15 dll in the references for the project. Not sure if this way of running macros is obsolete in access 16. If so, what is the correct way of doing this?
Thanks in advance.
The error also says "or one of its dependencies", install the interop from the link below.
https://www.nuget.org/packages/Microsoft.Office.Interop.Excel/15.0.4795.1000
Click on "Manual Download on the right ...
Not an answer to your question, but a macro can be run without Access references with late binding:
Dim accObj = GetObject(JobFolderPath & "somedb.mdb") ' opens the file if not already open
accObj.Application.Run("SomeProcess") ' the .Application part might not be needed
accObj.Application.Quit(2) ' AcQuitOption.acQuitSaveNone = 2
or command line switches (also not tested):
Process.Start(JobFolderPath & "somedb.mdb" "/x SomeProcess")
Finally i was able to fix it by installing 'microsoft office 16.0 access database engine'(32 bit version) and adding the required dlls as COM references instead of normal dll references.
I have been using folder browser for VBA, I could paste the code of it, but bottom line is that I get returned file name as a string.
Is there any way to access drawing properties (i.e number of layouts) without open?
Public Sub TestFileDialog()
dwgname = FileBrowseOpen("C:", "*", ".dwg", 1) 'dwgname is typeof string
End Sub
Its only the first step (use of FileBrowseOpen function is shown, but also i can use FolderBrowse and collect all .dwg inside of folder),actually i had in mind to batch export all layouts of selected .dwgs to currenty open one. Is there any chance for that?
To effectively read a .dwg file you'll need to open AutoCAD, otherwise the information is not accessible. Some properties may be, such as author, but not number of layouts...
But you can use AutoCAD Console (accoreconsole.exe) to run a headless AutoCAD and use APIs to read any information you need. This is really fast for reading lot's of files and the user will not see it running (but it needs to be installed anyway).
http://aucache.autodesk.com/au2012/sessionsFiles/3338/3323/handout_3338_CP3338-Handout.pdf
you could stay in VBA and use ObjectDBX
it leads to a very similar approach as accoreconsole.exe on in .NET does, i.e you won't see any drawing open in UI since it works on the database itself
It requires adding library reference (Tools->References) to "AutoCAD/ObjectDBX Common XX.Y Type Library", where "XX.Y" is "19.0" for AutoCAD 2014
a minimal functioning code is
Sub main()
Dim myAxDbDoc As AxDbDocument
Dim FullFileName As String
FullFileName = "C:\..\mydrawing.dwg" '<== put here the full name of the file to be opened
Set myAxDbDoc = AxDb_SetDrawing(FullFileName)
MsgBox myAxDbDoc.Layers.Count
End Sub
Function AxDb_SetDrawing(FullFileName As String) As AxDbDocument
Dim DBXDoc As AxDbDocument
Set DBXDoc = Application.GetInterfaceObject("ObjectDBX.AxDbDocument.19") '<== place correct AutoCAD version numeber ("19" works for AutoCAD 2014)
On Error Resume Next
DBXDoc.Open FullFileName
If Err <> 0 Then
MsgBox "Couldn't open" & vbCrLf & vbCrLf & FullFileName, vbOKOnly + vbCritical, "AxDB_SetDrawing"
Else
Set AxDb_SetDrawing = DBXDoc
End If
On Error GoTo 0
End Function
Still, you must have one AutoCAD session running from which make this sub run! But you should have it since talked about "currently open" drawing
I'm having the Run Time Error '2501' on a Form. Does anyone have ideas of why this happens and how to fix it?
The Report is called through this code:
Private Sub Command92_Click()
DoCmd.SetWarnings Off
''# get current reqid and version number
DoCmd.OpenQuery "NewReqVersion", acViewNormal
Dim NewReqID As Integer
Dim NewVerID As Integer
NewReqID = Me.Text58
NewVerID = Me.Version + 1
[Forms]![UWReviewForm].[StatusID] = 99
On Error Resume Next
**DoCmd.Save acForm, "UWReviewForm"**
DoCmd.OpenForm "NewReqVersionForm", acNormal
DoCmd.GoToRecord acDataForm, "NewReqVersionForm", acLast
End Sub
Private Sub StatusID_Change()
Me.LastModifiedTimeStamp = Now()
End Sub
The error 2501 can occur on calling OpenForm if there is a problem with the database. Can you please try following the steps in the link below under the headings "Recovering from corruption" and "Symptom: Cannot open a form or report"?
MS Access - Recovering from corruption
In my case, I had a table linked to an external data source, which was another Access database. I had experimented with splitting that database application into its database component and UI component, and had decided to revert the change. Somewhere along the line, this corrupted to the link between my original Access application and the external Access data source. I could verify this by attempting to open the linked table in my original Access application, and it gave an error.
My solution was to delete the linked table from my Access application and import it once again. After this, my problem resolved. The forms which could not open before were based on queries which included this external data source.