I am trying to optimize quality/filesize of a image-scanned pdf while retaining ocr quality.
I could try and downsample after ocr of the high quality pdf document but the tools I'm using (acrobat primarily) do not create small file sizes as compared to using photoshop and exporting a lower dpi/optimized pages and using these pages to create a pdf.
A better solution, if possible would be to take a image-pdf document (800M for the current case) that has been ocred and apply the ocr layer to a lower-rez downsampled document.
I can successfully extract the OCR info with coordinates as xml with pdfminer, but I would like to take this and apply it the same file that has been downsampled using photoshop. I thought I read this was possible with pdftk but I can no longer find this information.
Any suggestions would be greatly appreciated.
jack
Can you describe what's the current way your create PDFs?
With IText it's possible to set the compression level of images added.
May be useful
Related
I need to convert scanned document images to a PDF document with high compression. Compression ratio is very important. Can someone recommend any solution on C# for this task?
Best regards, Alexander
There is a free program called PDFBeads that can do it. It requires Ruby, ImageMagick and optionally jbig2enc.
The PDF format itself will probably add next to no overhead in your case. I mean your images will account for most of the output file size.
So, you should compress your images with highest possible compression. For black-and-white images you might get smallest output using FAX4 or JBIG2 compression schemes (both supported in PDF files).
For other images (grayscale, color) either use smallest possible size, lowest resolution and quality, or convert images to black-and-white and use FAX4/JBIG2 compression scheme.
Please note, that most probably you will lose some detail of any image while converting to black-and-white.
If you are looking for a library that can help you with recompression then have a look at Docotic.Pdf library (Disclaimer: I am one of developers of the library).
The Optimize images sample code shows how to recompress images before adding them to PDF. The sample shows how to recompress with JPEG, but for FAX4 the code will be almost the same.
I have several PDF in my server machine. they are taking lot of space. We are trying to reduce the size of PDF to optimize PDF scrolling performance and reduce size consumption. We have thought of using Adobe Acrobat 11 SDK. While using the trial, I have found the way of reducing PDF size by
file>saveasother>reducedsize PDF
Is any batch file possible that can reduce the size of PDF on the given folders. Alternatively a JavaScript or IAC would be also possible.
Any help would be greatly appreciated.
Thanks.
Is there any pdf tools that generate information regarding the loading time and memory usage to display pdf in browser, and also total element inside the pdf?
Unfortunately not really. I've done some of this research, not for PDF in a browser but (and perhaps this is what you are looking at as well) PDF on mobile devices.
There are a number of factors that contribute and that to some extent can be tested for:
Whether or not big images exist in the PDF and what resolution they are. This is linked directly to memory usage.
What compression method is used for image compression. Decompressing JPEG-2000 images specifically can increase load time significantly. Even worse, as JPEG-2000 can be progressively decompressed, it can give the appearance of a really bad PDF until the images has been fully decompressed and loaded (this is ugly specifically on somewhat older tablets for example).
How complex the transparency effects are that are used in the document.
How many fonts are used in the document.
How many line-art objects (vector elements) with a large number of nodes (points) are used on a page.
You can test what is in the document using Acrobat Pro to some extent (there is a well-hidden tool when you save an optimised PDF file that can audit what objects use how much of the space in a PDF document). You can also use a preflight solution such as pdfToolbox from callas (I'm affiliated with this company) or pitstop from enfocus; these tools would allow you to get a report with the results of custom checks such as image resolution, compression, vector objects, color spaces etc.
I was able to use Ned Batchelder's python code, which I converted to C++, to extract jpgs from pdf files. I'm wondering if the same technique can be used to extract tiff files and if so, does anyone know the appropriate offsets and markers to find them?
Thanks,
David
PDF files may contain different image data (not surprisingly).
Most common cases are:
Fax data (CCITT Group 3 and 4)
raw raster data with decoding parameters and optional palette all compressed with Deflate or LZW compression
JPEG data
Recently, I (as developer of a PDF library) start noticing more and more PDFs with JBIG2 image data. Also, JPEG2000 sometimes can be put into a PDF.
I should say, that you probably can extract JPEG/JBIG2/JPEG2000 data into corresponding *.jpeg / *.jp2 / *.jpx files without external libraries but be prepared for all kinds of weird PDFs emitted by broken generators. Also, PDFs quite often use object streams so you'll need to implement sophisticated parser for PDF.
Fax data (i.e. what you probably call TIFF) should be at least packed into a valid TIFF. You can borrow some code for that from open source libtiff for example.
And then comes raw raster data. I don't think that it makes sense to try to extract such data without help of a library. You could do that, of course, but it will take months of work.
So, if you are trying to extract only specific kind of image data from a set of PDFs all created with the same generator, then your task is probably feasible. In all other cases I would recommend to save time, money and hair and use a library for the task.
PDF files store Jpegs as actual JPEGS (DCT and JPX encoding) so in most cases you can rip the data out. With Tiffs, you are looking for CCITT data (but you will need to add a header to the data to make it a Tiff). I wrote 2 blog articles on images in PDF files at http://www.jpedal.org/PDFblog/2010/09/understanding-the-pdf-file-format-images/ and http://www.jpedal.org/PDFblog/2011/07/extract-raw-jpeg-images-from-a-pdf-file/ which might help.
I have an input PDF file (usually, but not always generated by pdfTeX), which I want to convert to an output PDF, which is visually equivalent (no matter the resolution), it has the same metadata (Unicode text info, hyperlinks, outlines etc.), but the file size is as small as possible.
I know about the following methods:
java -cp Multivalent.jar tool.pdf.Compress input.pdf (from http://multivalent.sourceforge.net/). This recompresses all streams, removes unused objects, unifies equivalent objects, compresses whitespace, removes default values, compresses the cross-reference table.
Recompressing suitable images with jbig2 and PNGOUT.
Re-encoding Type1 fonts as CFF fonts.
Unifying equivalent images.
Unifying subsets of the same font to a bigger subset.
Remove fillable forms.
When distilling or otherwise converting (e.g. gs -sDEVICE=pdfwrite), make sure it doesn't degrade image quality, and doesn't increase (!) the image sizes.
I know about the following techniques, but they don't apply in my case, since I already have a PDF:
Use smaller and/or less fonts.
Use vector images instead bitmap images.
Do you have any other ideas how to optimize PDF?
Optimize PDF Files
Avoid Refried Graphics
For graphics that must be inserted as bitmaps, prepare them for maximum compressibility and minimum dimensions. Use the best quality images that you can at the output resolution of the PDF. Inserting compressed JPEGs into PDFs and Distilling them may recompress JPEGs, which can create noticeable artifacts. Use black and white images and text instead of color images to allow the use of the newer JBIG2 standard that excels in monochromatic compression. Be sure to turn off thumbnails when saving PDFs for the Web.
Use Vector Graphics
Use vector-based graphics wherever possible for images that would normally be made into GIFs. Vector images scale perfectly, look marvelous, and their mathematical formulas usually take up less space than bitmapped graphics that describe every pixel (although there are some cases where bitmap graphics are actually smaller than vector graphics). You can also compress vector image data using ZIP compression, which is built into the PDF format. Acrobat Reader version 5 and 6 also support the SVG standard.
Minimize Fonts
How you use fonts, especially in smaller PDFs, can have a significant impact on file size. Minimize the number of fonts you use in your documents to minimize their impact on file size. Each additional fully embedded font can easily take 40K in file size, which is why most authors create "subsetted" fonts that only include the glyphs actually used.
Flatten Fat Forms
Acrobat forms can take up a lot of space in your PDFs. New in Acrobat 8 Pro you can flatten form fields in the Advanced -> PDF Optimizer -> Discard Objects dialog. Flattening forms makes form fields unusable and form data is merged with the page. You can also use PDF Enhancer from Apago to reduce forms by 50% by removing information present in the file but never actually used. You can also combine a refried PDF with the old form pages to create a hybrid PDF in Acrobat (see "Refried PDF" section below).
see article
From PDF specification version 1.5 there are two new methods of compression, object streams and cross reference streams.
You mention that the Multivalent.jar compress tool compresses the cross reference table. This usually means the cross reference table is converted into a stream and then compressed.
The format of this cross reference stream is not fixed. You can change the bit size of the three "columns" of data. It's also possible to pre-process the stream data using a predictor function which will improve the compression level of the data. If you look inside the PDF with a text editor you might be able to find the /Predictor entry in the cross reference stream dictionary to check whether the tool you're using is taking advantage of this feature.
Using a predictor on the compression might be handy for images too.
The second type of compression offered is the use of object streams.
Often in a PDF you have many similar objects. These can now be combined into a single object and then compressed. The documentation for the Multivalent Compress tool mentions that object streams are used but doesn't have many details on the actual choice of which objects to group together. The compression will be better if you group similar objects together into an object stream.