I'm playing with personal edition of QV and can't figure one thing - I've taken export from Jira into excel and built charts and stuff and now I want to build a chart that will display count of jira items (that's "Count(Key)" in definition and works just fine) that have empty "time spent" (this I can't figure how to implement).
Count(If(not IsNull([Time Spent]), Key))
Related
I am trying to create a column that imports the analyst price target from TipRanks website.
I uploaded two images:
Image 1: you can see the cell that I want to import.
Image 2: you can see my function that doesn't work.
What should I change in order to get this live info?
Thanks.
The site you are checking is actually "javascript" generated thus import functions won't properly work on them.
To check, just try to import the whole site data. If it returns a javascript function, then it is javascript generated.
Sample (tipranks.com)
What you can do is actually try to find other sites that provide the same data.
I did find one with the same data you are looking for, 50.38 for csiq. Link is "https://www.marketwatch.com/investing/stock/csiq/analystestimates". And since data is shown as table, it would be easier to import using importhtml.
Cell formula is:
=INDEX(IMPORTHTML("https://www.marketwatch.com/investing/stock/csiq/analystestimates", "table", 5), 2, 2)
Sample output:
The table is the fifth one in the DOM, and INDEX(table, 2, 2) means getting the 2nd row 2nd column of the table.
If the site is no good for you, you can try finding other sites that would suit your needs. And then use either importhtml or importxml depending on the site structure.
When you inspect the network when the website is loading you will see that the prices come when calling the forecast endpoint https://www.tipranks.com/stocks/tsla/forecast. This in turn returns an html response which is probably generated with Javascript on the client because they use React on the frontend, but you can still see the preview in the Network tab of the browser dev tools.
You can then copy the preview in VSCode and prettify it, to try and pin point the span holding the price. Of course it won't be exact science, because the html tags are generated with some media queries, but you will get close enough to some extent.
After you get the xml path but you get an empty error, you can delete some tags until you get some text. Use search in google sheets to search for highest price label, and than continue adding tags until you get the desired value.
Here is what I managed to get:
Lowest price target:
=importxml("https://www.tipranks.com/stocks/snow/forecast", "/html/body/div[1]/div[1]/div[4]/div[1]/div[2]/div[1]/div[4]/div[2]/div[2]/div[4]/div[1]/div[1]/div[5]/span[2]")
Average price target:
=importxml("https://www.tipranks.com/stocks/snow/forecast", "/html/body/div[1]/div[1]/div[4]/div[1]/div[2]/div[1]/div[4]/div[2]/div[2]/div[4]/div[1]/div[1]/div[3]/span[2]")
Highest price target:
=importxml("https://www.tipranks.com/stocks/snow/forecast", "/html/body/div[1]/div[1]/div[4]/div[1]/div[2]/div[1]/div[4]/div[2]/div[2]/div[4]/div[1]/div[1]/div[1]/span[2]")
In time these methods might change depending on their development process, but you could use the above steps to update the script.
P.S. I wasn't satisfied with the marketwatch analyst price targets. I think the wisdom of the crowd is better on tipranks.
Try this one. Works perfectly fine on my personal Stock Portfolio on Google Sheets:
Lowest Price Target:
=importxml(CONCATENATE("https://www.tipranks.com/stocks/", A1,"/forecast"), "//*[#class='colorpurple-dark ml3 mobile_fontSize7 laptop_ml0']")
Average Price Target:
=importxml(CONCATENATE("https://www.tipranks.com/stocks/", A4,"/forecast"), "//*[#class='colorgray-1 ml3 mobile_fontSize7 laptop_ml0']")
Highest Price Target:
=importxml(CONCATENATE("https://www.tipranks.com/stocks/", A4,"/forecast"), "//*[#class='colorpale ml3 mobile_fontSize7 laptop_ml0']")
I have a situation where i'd like to enter a "3" into a textbox on a user story grid, call something like RankToPosition(3) to move that user story row to position 3 in the current rank. Within the same grid, the idea is to have a textbox on each row, so the row beneath may have a 4 in there, and when i click SUBMIT, the entire table would be processed by using the numbers in the row textbox and calling RankToPosition(#). This is like the Netflix queue. There have been similar questions on here, but my thought is to just call the underlying method alluded to here as "_onMoveToPositionClicked":
https://help.rallydev.com/apps/2.0rc3/doc/source/MoveToPositionMenuItem.html#Rally-ui-menu-item-MoveToPositionMenuItem-cfg-rankRecordHelper
If i could iterate through the table grid, store initial rank values (i realize they're not just integers), and pick the new text values up, run code to call the _onMoveToPositionClicked beneath the scenes, it may accomplish a bulk rank grid for when users have 200+ items to manage, for instance.
Any insight you have for just calling this in custom code would be helpful. Any solution for representing this functionality would be appreciated. I am currently using Rally 2.0rc3.
Thank you for your time
Is it possible to upgrade to a newer version of the App SDK? 2.0rc3 is a very old pre-release. The latest is 2.1: https://help.rallydev.com/apps/2.1/doc/
In any case, the way ranking is performed is relative to another object via the rankAbove or rankBelow parameters. So given the record you want to rerank:
record.save({
params: {
rankAbove: '/hierarchicalrequirement/12345'
}
});
I'm struggling to get all the required (and only the required) information into the documentation of my Enterprise Architect Project. Precisely: we have modelled various requirements and displayed the source "standards" for these requirements in our diagrams by using the "hyperlink"-element out of the common toolbox. (This allows us to capture a title, the website where the documentation is found and a description of this documentation).
Now this element is visible on the diagram, but not in the package-view of our model and it does not get generated in our word (docx) documentation.
I can see that it should be possible to get this in the documentation, because a "Model Report" which basically prints everything does print the hyperlinks. But I can't find what I have to select in my template (in the package-tree view, as a package field, element field or diagram field) in order to get this printed. I can't just use the model report since this basically dumps the whole database in the document and reverse-engineering this model report has proven too difficult for me. Actually I would expect this to be in some kind of documentation for EA, but could not find such a thing with this level of detail... is there, is there a reproducible way of finding such things out in further cases? (btw I'm using EA 11.0)
[sorry there were illustrations here, but I'm not allowed to upload them...]
As Geert has already noted, there is a difference between "proper" elements and diagram-only elements. This is actually reflected in the document template editor, where there is an "Element" section inside the "Diagram" section. This will produce output for all elements in the diagram, whether or not they are also in the project browser.
Here's an example of the information you can pull out of your hyperlinks. Given a diagram with a hyperlink:
... and a template which outputs name, alias and hyperlink for each element in the diagram:
... EA will generate a document will the following contents:
So if you want the hyperlink to result in a hyperlink in the document, use the HyperlinkAlias field.
What might be a bit confusing is the fact that in addition to the Hyperlink element type in the Common diagram toolbox, EA allows you to create hyperlinks in regular elements (in the Element Properties dialog, Related tab: Files, which can be local files or web addresses).
In fact, I would recommend that you use those in your Requirement elements rather than diagram-only Hyperlinks if traceability is a priority in your model. The diagram-only Hyperlinks, on the other hand, give you a clearer visual.
Selecting a subset of the elements in a diagram ("only the required information") is a little more involved and depends on how your model is structured. Template fragments will get the job done, but you might be able to achieve your desired result by just using the filters in the document generation dialog.
The hyperlink is an element that is stored in the same package as the diagram it is used on, it is just not visible in the project browser (similar to a note element).
There's a good chance that it doesn't have a name, so make sure you don't omit nameless elements.
So if you print all the element of the package containing the diagram then you should be able to print the hyperlink as well.
In case that fails you might want to consider creating a template fragment based on an SQL query or a script. Those offer lots of flexibility to print whatever you need, even if it is located in a different package.
[Edited on 04.05.15 to reflect the comment by Uffe and provide a final solution]
Ok, based on Geerts answer, using the following custom query fragment in the diagram section:
select
t_object.ea_guid as CLASSGUID,
t_object.Object_Type as CLASSTYPE,
t_object.Object_Id as OBJECTID,
t_object.name as HL_Name,
t_object.Stereotype as HL_Stereotype,
t_object.object_type as HL_Type,
t_object.Alias as HL_Alias,
Note as Notes
--,t_object.*
from t_object
left join t_diagramobjects on (t_object.Object_ID = t_diagramobjects.Object_ID)
left join t_diagram on (t_diagram.Diagram_ID = t_diagramobjects.Diagram_ID)
where t_diagram.Diagram_ID = '#DIAGRAMID#'
and t_object.Object_Type='Text'
I was able to get a list of the hyperlinks following the diagram, this is the fragment:
custom >
{HL_Alias}: {HL_Name}
{Notes}
< custom
The "Notes" can be printed by getting the attribute directly out of the t_object table. Don't get confused as I was at first: the auto-completion on t_object and the results (t_object.*) DO NOT SHOW a Note-Attribute, but it does exist an when you write it into the query, it gets generated in the document.
I am using Kentico 7.0, ecommerce version.
I would like to create a sidebar menu that shows the eshop's top selling product categories. I am a kentico newbie so I am looking around for the correct terminology/guidance so that I can dig deeper.
The ideal approach in my opinion would be to be able to add a field on categories, which is used to filter categories for the menu. This way I can either have some kind of job that updates the fields automatically based on sales, OR provide a manual override for an admin to specify whether a category will show up on the menu. Of course some kind of weight would also be needed to specify menu item ordering.
Which way should I look?
HAve you tried using the "Top N products by sales" web part that is available? you can configure from which part of the content tree (products) it should pull the data - in the Path property you can use also a path expression or macro that is resolved dynamically so the web part can display different products in different sections.
There are many ways to code for Kentico. I personally find the API is a bit clunky and on quite a few occasions I was surprised that a method didn't exist requiring extra calls to get the required results. I do use the Kentico API more when putting data in to Kentico. Pulling it out I use the following.
STORED PROC
Write a SQL stored procedure to get the top X categories - GetTop5Categories.
Look at the COM_* tables, specifically COM_OrderItem, linking OrderItemSKUID back to COM_SKU (or View_COM_SKU_Joined if you need to get to the IA).
This will get you the top selling products with a group by, a count, a top X and an order by.
Then you can link to other tables such as CMS_Category or CMS_Document (depending on how you setup your categories). The bonus of this is that procs are compiled, you do all your data manipulation there (it's what MSSQL specialises in!) and you only send back what you need to in the result set.
DOMAIN (leveraging EF)
I usually create a separate class library project myproject.domain and put an Entity Framework edmx in there mapped back to the Kentico DB. Add the proc to the EDMX, then create a Function Import MyProject_GetTop5Categories from your newly imported proc.
WEB
add a reference to the domain project from your web project, and a 'using at the top of the codebehind of the control.
using myproject.domain;
then in Page_Load for the control:
...
if(!IsPostBack)
{
var entities = new MyProjectModelContainer();
var list = entities.MyProject_GetTop5Categories().ToList();
StringBuilder sb = new StringBuilder("<ul>");
foreach(var category in list)
{
sb.Append("<li><a href='"+category.Link+"'>" + category.Name + "</a></li>");
}
sb.Append("<ul>");
listPlaceHolder = sb.ToString();
}
handwritten so probably a typo or two in there :)
HTH
I am having an issue with the "Profile Checkboxes" module which stores custom profile fields comma separated.
The issue is if I create a view to filter by a value. The SQL result ends up being something like this:
...AND (profile_values_profile_interests.value in ('Business and Investment'))...
Which will not return any data since the value is stored like this:
"Business and Investment, Case Law, Labor Law, Tax Law"
I just need to adjust the SQL so that it is making sure the field contains the selected value
Is there anything I can do to adjust this?
For a 'quick hack' solution, you could try implementing hook_views_query_alter(&$view, &$query) in a custom module, check $view->name (and eventually also $view->current_display) to ensure you are dealing with the right view/display, and then manipulate $query as needed.
EDIT: Looks like the underlying problem has been addressed by the module maintainer in the meantime - see John's answer ...
I'm the creator and maintainer of Profile Checkboxes and thought you might be interested to know that the new version of the module now stores the values as serialized and includes Views support. The feature is available in the current release version.
Check out the Views modify query module.