I want to send a subview out of my super UIView with animation, It works fine but when i tried to change the size during animation any UILabel that i have in my subview suddenly become too small.
here is part of my code
-(void)pushOutScreen:(UIViewController *)pop{
[UIView animateWithDuration:1
delay:0.0
options: UIViewAnimationTransitionFlipFromLeft
animations:^{
CGRect frame = pop.view.frame;
frame.size.height = frame.size.height /4;
frame.size.width = frame.size.width /4;
frame.origin.x = -500;
frame.origin.y = 318;
pop.view.frame = frame;
}
completion:^(BOOL finished){
NSLog(#"Done!");
}];
}
note: any UIButton or UIImage that is inside my subview animated well but i have only problem with UILabel.
UIView animation is not good option for doing this, instead of it try CAKeyframeAnimation. This is sample code for scaling UIView:
- (void) scaleView:(UIView *)popView {
CAKeyframeAnimation *animation = [CAKeyframeAnimation
animationWithKeyPath:#"transform"];
animation.delegate = self;
// CATransform3DMakeScale has 3 parameter (x,y,z)
CATransform3D scale1 = CATransform3DMakeScale(1.0, 1.0, 1);
CATransform3D scale2 = CATransform3DMakeScale(0.2, 0.2, 1);
NSArray *frameValues = [NSArray arrayWithObjects:
[NSValue valueWithCATransform3D:scale1],
[NSValue valueWithCATransform3D:scale2],
nil];
[animation setValues:frameValues];
NSArray *frameTimes = [NSArray arrayWithObjects:
[NSNumber numberWithFloat:0.0],
[NSNumber numberWithFloat:1.0],
nil];
[animation setKeyTimes:frameTimes];
animation.fillMode = kCAFillModeForwards;
animation.removedOnCompletion = NO;
animation.duration = 1.0;
[popView.layer addAnimation:animation forKey:#"popup"];
}
you can use this after you add your UIView as subView then you can call this method as scale it. for push out a sub view with this method you need to use removeFromSubView after the animation finished.
for knowing that when it finished use
-(void)animationDidStop:(CAAnimation *)anim finished:(BOOL)flag
{
[subView removeFromSuperview];
}
I hope it be useful!
Related
[UIView animateWithDuration:0.5 animations:^{
imageView.frame = self.view.bounds;
} completion:^(BOOL finished) {}];
how can I write this using CABasicanimation.
below is the simple implementation
-(void)StartAnmation {
[subview.layer addAnimation:[self ZoomAnimation] forKey:#"Zoom"];
}
-(CAAnimationGroup *)ZoomAnimation {
CAAnimationGroup *ZoomAnimation = [CAAnimationGroup animation];
CABasicAnimation *In = [self zoomIn];
ZoomAnimation.animations = [NSArray arrayWithObjects: In, nil];
ZoomAnimation.duration = 2.0f;
return ZoomAnimation;
}
-(CABasicAnimation *)zoomIn {
CABasicAnimation *ZoomInAnimation = [CABasicAnimation animationWithKeyPath:#"transform.scale"];
ZoomInAnimation.beginTime = 0.0f;
ZoomInAnimation.fromValue = [NSNumber numberWithFloat:20.0];
ZoomInAnimation.toValue = [NSNumber numberWithFloat:1.0];
ZoomInAnimation.duration = 2.0f;
return ZoomInAnimation;
}
For Zoom images you can done by using UIImageView itself.
Please refer the answer Pinch To Zoom Effect on UIImageView inside scrollView
This code does the following: It takes a 'snapshot' of a NavigationController meant to disappear. Then the snapshot is added to the view of a container view controller, slides away and reveals the new NavigationController. To create the 'Pop-Out-Effect' the midAnFrame makes the view a bit bigger than the actual view. After that postAnFrame provides the sliding out of the container view's frame. Works great, the only problem is that the subviews of animationContainer don't resize like their superView during the animation.
- (void)bringUpSettingsNavigationController {
CGFloat gradientWidth = 20;
CGFloat frameIncrease = 10;
CGRect preAnFrame = CGRectMake(- gradientWidth, 0, self.view.frame.size.width + gradientWidth, self.view.frame.size.height);
CGRect midAnFrame = CGRectMake(-(frameIncrease + gradientWidth), - frameIncrease, preAnFrame.size.width + (2*frameIncrease), preAnFrame.size.height + (2*frameIncrease));
CGRect postAnFrame = CGRectMake(midAnFrame.size.width, midAnFrame.origin.y, midAnFrame.size.width, midAnFrame.size.height);
UIView *animationContainer = [[UIView alloc]initWithFrame:preAnFrame];
animationContainer.backgroundColor = [UIColor clearColor];
animationContainer.autoresizesSubviews = YES;
self.topImageView = [[UIImageView alloc]initWithImage:[self topImageFromView:self.view]];
self.topImageView.frame = CGRectMake(gradientWidth, 0, preAnFrame.size.width - gradientWidth, preAnFrame.size.height);
[animationContainer addSubview:self.topImageView];
self.topImageView.clipsToBounds = YES;
UIView *gradientView = [[UIView alloc]initWithFrame:CGRectMake(0, 0, gradientWidth, preAnFrame.size.height)];
CAGradientLayer *gradientLayer = [CAGradientLayer layer];
gradientLayer.frame = gradientView.bounds;
gradientLayer.colors = [NSArray arrayWithObjects:(id)[[UIColor clearColor] CGColor], (id)[[UIColor colorWithWhite:0 alpha:.5] CGColor], nil];
gradientLayer.startPoint = CGPointMake(0, 0.5);
gradientLayer.endPoint = CGPointMake(1.0, 0.5);
[gradientView.layer insertSublayer:gradientLayer atIndex:0];
gradientView.backgroundColor = [UIColor clearColor];
[animationContainer addSubview:gradientView];
gradientView.clipsToBounds = YES;
[self.view addSubview:animationContainer];
BYSettingsNavigationController *settingsNavigationController = [[BYSettingsNavigationController alloc]initWithRootViewController:[[BYSettingsViewController alloc]init]];
[self addChildViewController:settingsNavigationController];
settingsNavigationController.view.frame = self.view.bounds;
[self.view insertSubview:settingsNavigationController.view belowSubview:animationContainer];
[settingsNavigationController didMoveToParentViewController:self];
[UIView animateWithDuration:0.2 animations:^{
animationContainer.frame = midAnFrame;
} completion:^(BOOL finished) {
[UIView animateWithDuration:.5 animations:^{
animationContainer.frame = postAnFrame;
} completion:^(BOOL finished) {
[self.topImageView removeFromSuperview];
[gradientView removeFromSuperview];
self.topImageView = nil;
}];
}];
[self.currentNavigationController willMoveToParentViewController:nil];
[self.currentNavigationController.view removeFromSuperview];
[self.currentNavigationController removeFromParentViewController];
}
Thanks in advance for your ideas and have a great 2013!
Dario
What your doing is not zooming in , your just changing the frame size.
To zoom in you need to change the transformation of the view.
What you need to do is something along this line:
view.transform = CGAffineTransformMakeScale (2.0 , 2.0);
for example to zoom X2
Look at this video of the MLB At Bat app. Basically, I just want to present a modalViewController with the UIModalPresentationFormSheet style and have it grow from another view then flip. Like when you tap on a game in the scoreboard on the MLB app. Anyone know how I can accomplish this?
Thanks
EDIT: My main view is pretty much the same setup as the MLB app. I'm using AQGridView and want the animation to occur when a cell in the grid view is tapped.
EDIT 2: I'd also be open to ditching the UIViewController concept and just using a plain UIView, then replicate the style of UIModalPresentationFormSheet manually if that's easier.
EDIT 3: Okay, forget using a UIViewController to do this, since I haven't gotten any responses, I'll assume it isn't possible. My new question is just how do I replicate the animation in the posted video using just UIView's? So basically, the initial view needs to grow, move, and flip all at the same time.
EDIT 4: I think I have the actual animation figured out, now my only problem is calculating coordinates to feed into CATransform3DTranslate. My view needs to animate pretty much exactly like in the video. It needs to start over another view and animate to the center of the screen. Here's how I'm trying to calculate the coordinates for the view that pops up in the center:
CGPoint detailInitialPoint = [gridView convertPoint:view.frame.origin toView:detailView.frame.origin];
CGPoint detailFinalPoint = detailView.frame.origin;
gridView is the container view of my main view that holds the smaller grid items. view is the specific grid item that we are animating from. And detailView is the view that comes up in the middle of the screen.
You can implement your own transition using a category on UIViewControler.
UIViewController+ShowModalFromView.h
#import <Foundation/Foundation.h>
#import <QuartzCore/QuartzCore.h>
#interface UIViewController (ShowModalFromView)
- (void)presentModalViewController:(UIViewController *)modalViewController fromView:(UIView *)view;
#end
UIViewController+ShowModalFromView.m
#import "UIViewController+ShowModalFromView.h"
#implementation UIViewController (ShowModalFromView)
- (void)presentModalViewController:(UIViewController *)modalViewController fromView:(UIView *)view {
modalViewController.modalPresentationStyle = UIModalPresentationFormSheet;
// Add the modal viewController but don't animate it. We will handle the animation manually
[self presentModalViewController:modalViewController animated:NO];
// Remove the shadow. It causes weird artifacts while animating the view.
CGColorRef originalShadowColor = modalViewController.view.superview.layer.shadowColor;
modalViewController.view.superview.layer.shadowColor = [[UIColor clearColor] CGColor];
// Save the original size of the viewController's view
CGRect originalFrame = modalViewController.view.superview.frame;
// Set the frame to the one of the view we want to animate from
modalViewController.view.superview.frame = view.frame;
// Begin animation
[UIView animateWithDuration:1.0f
animations:^{
// Set the original frame back
modalViewController.view.superview.frame = originalFrame;
}
completion:^(BOOL finished) {
// Set the original shadow color back after the animation has finished
modalViewController.view.superview.layer.shadowColor = originalShadowColor;
}];
}
#end
This can easily be changed to use whatever animated transition you want; for your's, you might want to use a CA3DTransform. Hope this helps!
To do a flip, grow, and translate animation you can use the following code:
- (void)animate {
int newX, newY; //New position
int newW, newH; //New size
[UIView animateWithDuration:someDuration delay:someDelay animations:^{
yourView.transform = CATransform3DMakeRotation(M_PI_2,1.0,0.0,0.0); //flip halfway
yourView.frame = CGRectMake(newX/2, newY/2, newW/2, newH/2);
} completion:^{
while ([yourView.subviews count] > 0)
[[yourView.subviews lastObject] removeFromSuperview]; // remove all subviews
// Add your new views here
[UIView animateWithDuration:someDuration delay:someDelay animations:^{
yourView.transform = CATransform3DMakeRotation(M_PI,1.0,0.0,0.0); //finish the flip
yourView.frame = CGRectMake(newX, newY, newW, newH);
} completion:^{
// Flip completion code here
}];
}];
}
Hope this helps!
OK, I figured it out. Here's what I did:
CGFloat duration = 0.8;
/*
//Detail View Animations
*/
CATransform3D initialDetailScale = CATransform3DMakeScale(view.frame.size.width/vc.view.frame.size.width, view.frame.size.height/vc.view.frame.size.height, 1.0);
CATransform3D initialDetailTransform = CATransform3DRotate(initialDetailScale, -M_PI, 0.0, -1.0, 0.0);
CATransform3D finalDetailScale = CATransform3DMakeScale(1.0, 1.0, 1.0);
CATransform3D finalDetailTransform = CATransform3DRotate(finalDetailScale, 0.0, 0.0, -1.0, 0.0);
NSMutableArray *detailAnimations = [NSMutableArray array];
CABasicAnimation *detailTransform = [CABasicAnimation animationWithKeyPath:#"transform"];
detailTransform.fromValue = [NSValue valueWithCATransform3D:initialDetailTransform];
detailTransform.toValue = [NSValue valueWithCATransform3D:finalDetailTransform];
detailTransform.duration = duration;
[detailAnimations addObject:detailTransform];
CABasicAnimation *detailFadeIn = [CABasicAnimation animationWithKeyPath:#"opacity"];
detailFadeIn.fromValue = [NSNumber numberWithFloat:1.0];
detailFadeIn.toValue = [NSNumber numberWithFloat:1.0];
detailFadeIn.duration = duration/2;
detailFadeIn.beginTime = duration/2;
[detailAnimations addObject:detailFadeIn];
CABasicAnimation *detailMove = [CABasicAnimation animationWithKeyPath:#"position"];
detailMove.fromValue = [NSValue valueWithCGPoint:vc.view.layer.position];
detailMove.toValue = [NSValue valueWithCGPoint:self.view.layer.position];
detailMove.duration = duration;
[detailAnimations addObject:detailMove];
CAAnimationGroup *detailGroup = [CAAnimationGroup animation];
[detailGroup setAnimations:detailAnimations];
[detailGroup setDuration:duration];
detailGroup.removedOnCompletion = NO;
detailGroup.fillMode = kCAFillModeForwards;
detailGroup.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseInEaseOut];
[vc.view.layer addAnimation:detailGroup forKey:#"anim"];
/*
//Grid Item View Animations
*/
CATransform3D initialGridScale = CATransform3DMakeScale(1.0, 1.0, 1.0);
CATransform3D initialGridTransform = CATransform3DRotate(initialGridScale, 0.0, 0.0, 1.0, 0.0);
CATransform3D finalGridScale = CATransform3DMakeScale(vc.view.frame.size.width/view.frame.size.width, vc.view.frame.size.height/view.frame.size.height, 1.0);
CATransform3D finalGridTransform = CATransform3DRotate(finalGridScale, M_PI, 0.0, 1.0, 0.0);
NSMutableArray *gridAnimations = [NSMutableArray array];
CABasicAnimation *gridTransform = [CABasicAnimation animationWithKeyPath:#"transform"];
gridTransform.fromValue = [NSValue valueWithCATransform3D:initialGridTransform];
gridTransform.toValue = [NSValue valueWithCATransform3D:finalGridTransform];
gridTransform.duration = duration;
[gridAnimations addObject:gridTransform];
CABasicAnimation *gridFadeOut = [CABasicAnimation animationWithKeyPath:#"opacity"];
gridFadeOut.fromValue = [NSNumber numberWithFloat:0.0];
gridFadeOut.toValue = [NSNumber numberWithFloat:0.0];
gridFadeOut.duration = duration/2;
gridFadeOut.beginTime = duration/2;
[gridAnimations addObject:gridFadeOut];
CABasicAnimation *gridMove = [CABasicAnimation animationWithKeyPath:#"position"];
gridMove.fromValue = [NSValue valueWithCGPoint:view.layer.position];
gridMove.toValue = [NSValue valueWithCGPoint:[self.view.layer convertPoint:self.view.layer.position toLayer:gridView.layer]];
gridMove.duration = duration;
[gridAnimations addObject:gridMove];
CAAnimationGroup *gridGroup = [CAAnimationGroup animation];
[gridGroup setAnimations:gridAnimations];
gridGroup.duration = duration;
gridGroup.fillMode = kCAFillModeForwards;
gridGroup.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseInEaseOut];
gridGroup.removedOnCompletion = NO;
[view.layer addAnimation:gridGroup forKey:#"anim"];
I'm doing this with an item in an AQGridView. In my code sample view is the instance of AQGridViewCell that I am animating. And vc.view is my detail UIViewController/UIView that I'm displaying.
I would highly recommend taking a look at this post.
You shouldn't need to actually handle all this animation yourself.
If you use the UIView class method transitionFromView:toView:duration:options:completion: and passing in UIViewAnimationOptionTransitionFlipFromLeft or UIViewAnimationOptionTransitionFlipFromRight -- whichever way you want the animation to flip.
I have implemented the same thing as shown in the MLB app using this method. Your from view would be the cell in the grid and the to view would be the thing that would on the "back" of the cell.
Hope this will reduce the overall code you'll need.
I would use a UICollectionView with a custom UICollectionViewCell and animate in with its delegate call... Just an example for others to pick at.
#pragma mark - UICollectionViewDelegate
- (void)collectionView:(UICollectionView *)collectionView didSelectItemAtIndexPath:
(NSIndexPath *)indexPath
{
[UIView beginAnimations:#"showImage" context:Nil];
CGRect cellFrame = cell.frame;
CGRect imgFram = cell.imageView.frame;
[UIView setAnimationDuration:0.8];
[UIView setAnimationTransition:UIViewAnimationTransitionFlipFromLeft forView:cell
cache:YES];
cellFrame.size = CGSizeMake(200, 200);
cellFrame.origin.y = 10;
cellFrame.origin.x = 45;
cell.frame = cellFrame;
imgFram.size = CGSizeMake(200, 200);
cell.imageView.frame = imgFram;
[collectionView bringSubviewToFront:cell];
[UIView commitAnimations];
}
I'm performing a rotation of an UIImageView in place first before performing a rotation animation:
// rotate to the left by 90 degrees
someView.transform = CGAffineTransformMakeRotation((-0.5)*M_PI);
Then calling a rotation on the view by 180 degrees... but it seems like it is rotating the image starting from the original position as if it was not initially rotated.
- (void)rotateIndicatorToAngle: (UIView *)view angle: (NSNumber *)angleInDegrees
{
CALayer *layer = view.layer;
CGFloat duration = 5.0;
CGFloat radians = [self ConvertDegreesToRadians: [angleInDegrees floatValue]];
CABasicAnimation* rotationAnimation;
rotationAnimation = [CABasicAnimation animationWithKeyPath:#"transform.rotation.z"];
rotationAnimation.toValue = [NSNumber numberWithFloat: radians];
rotationAnimation.duration = duration;
rotationAnimation.cumulative = YES;
rotationAnimation.repeatCount = 1.0;
rotationAnimation.removedOnCompletion = NO;
rotationAnimation.fillMode = kCAFillModeForwards;
rotationAnimation.timingFunction = [CAMediaTimingFunction
functionWithName:kCAMediaTimingFunctionEaseOut];
[layer addAnimation: rotationAnimation forKey: #"rotationAnimation"];
}
What gives?
rotationAnimation.cumulative = YES;
Have you tried using rotationAnimation.additive = YES; instead of cumulative?
You could use the class methods from UIView to easily animate your view:
[UIView beginAnimation: #"Rotate" context: nil];
[UIView setAnimationDuration: 5.0f];
[UIView setAnimationCurve: UIViewAnimationCurveEaseOut];
CGFloat radians = [self ConvertDegreesToRadians: [angleInDegrees floatValue]];
view.transform = CGAffineTransformMakeRotation(radians);
[UIView commitAnimation];
That's what I'm using most of the time, no need to use layers.
UPDATE: I mean, I find it easier not to use layers in that case, no pejorative value on using layers.
I've successfully put together a mapview with a pin annotation representing the users current position that updates at a set interval. When the location manager updates the user's position, the pin annotation disappears and reappears at the new location. Has anyone played with getting the current user's GPS location to update through the use of an animation, like what is done in Apple's offical mapping application? If so, I'd love some pointers to get this to work. Thanks!
Solution 1:
First, you need to make your view controller implement MKMapViewDelegate if it doesn't already.
Then, implement this method:
- (void)mapView:(MKMapView *)mapView didAddAnnotationViews:(NSArray *)views {
MKAnnotationView *aV;
for (aV in views) {
CGRect endFrame = aV.frame;
aV.frame = CGRectMake(aV.frame.origin.x, aV.frame.origin.y - 230.0, aV.frame.size.width, aV.frame.size.height);
[UIView beginAnimations:nil context:NULL];
[UIView setAnimationDuration:0.45];
[UIView setAnimationCurve:UIViewAnimationCurveEaseInOut];
[aV setFrame:endFrame];
[UIView commitAnimations];
}
}
Add your annotations to the MapView and when they are added, this delegate method will be called and will animate the pins from top to bottom as they are added.
The values for timing and positioning can be changed a little bit but I've tweaked it to make it look best/closest to the traditional drop (as far as I've tested).
Solution 2:
Alternatively, if you're making a MKAnnotationView subclass, you can use didMoveToSuperview to trigger the animation. The following does a drop that ends in a slight 'squish' effect
#define kDropCompressAmount 0.1
#implementation MyAnnotationViewSubclass
...
- (void)didMoveToSuperview {
CABasicAnimation *animation = [CABasicAnimation animationWithKeyPath:#"transform"];
animation.duration = 0.4;
animation.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseIn];
animation.fromValue = [NSValue valueWithCATransform3D:CATransform3DMakeTranslation(0, -400, 0)];
animation.toValue = [NSValue valueWithCATransform3D:CATransform3DIdentity];
CABasicAnimation *animation2 = [CABasicAnimation animationWithKeyPath:#"transform"];
animation2.duration = 0.10;
animation2.beginTime = animation.duration;
animation2.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseOut];
animation2.toValue = [NSValue valueWithCATransform3D:CATransform3DScale(CATransform3DMakeTranslation(0, self.layer.frame.size.height*kDropCompressAmount, 0), 1.0, 1.0-kDropCompressAmount, 1.0)];
animation2.fillMode = kCAFillModeForwards;
CABasicAnimation *animation3 = [CABasicAnimation animationWithKeyPath:#"transform"];
animation3.duration = 0.15;
animation3.beginTime = animation.duration+animation2.duration;
animation3.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseOut];
animation3.toValue = [NSValue valueWithCATransform3D:CATransform3DIdentity];
animation3.fillMode = kCAFillModeForwards;
CAAnimationGroup *group = [CAAnimationGroup animation];
group.animations = [NSArray arrayWithObjects:animation, animation2, animation3, nil];
group.duration = animation.duration+animation2.duration+animation3.duration;
group.fillMode = kCAFillModeForwards;
[self.layer addAnimation:group forKey:nil];
}
Hope this helps!
PK