So we built a bar button inside a popover and used a modal segue linked to a UIViewController in storyboard. However, there is not back button. How can we build a back button?
Related
is it possible to make the navigation controller's toolbar show the same button items in all of my viewcontrollers using the storyboard?
So far, I have enabled the "Show Toolbar" checkbox in the navigation controller. I have also added one Bar Button Item (item1) to the first view controller. But this bar button disappears when I go to the next view controller. I want that button item to stay there in the toolbar regardless of what view controller is being shown.
I use UITabBar in my application. In one of my tabbars, i have a UITableView in a UIViewController whose root view controller is a Navigation Controller. When i click on a cell, i go to my custom edit mode which is a UIViewController.
In my edit mode I have a backButton that shows me UIViewController with the TableView.
My problem is when i click backButton, my TabBar disappears.
Do you have any ideas why my TabBar disappears?
Thanks.
In back button click, add the following code.
[self.navigationController popViewControllerAnimated:YES];
I created a new navigation controller in my storyboard (not programmatically!) and set it to be "Root View Controller" to a regular UIViewController and added a button in it which says- forward to the next view controller (this second view controller is a view controller which I want that will have a back button to link to the initial view controller).
Now, whenever I try to link the button to the next view controller- "Pushing a navigation controller is not supported".
Help me please, and thanks
EDIT:
I accidentally subclassed UINavigationController, and not UIViewController in my class.
Thank you anyway.
I've tried this and have no problems, its all done in IB with no additional code required ...
Start a new project, "Single View Application" using story boards
Select storyboard and delete the views its produced.
Drag on a new Navigation Controller (it will bring a table view with it)
Delete the table and the table view controller, so you are just left with the Navigation Controller
Drag on a normal view controller
Right Click and drag from the Navigation controller to the new View and choose "Relationship - Root View Controller"
Drag a "Bar Button Item" on to the Navbar which should be visible on the top of your ViewController, you can rename this Forward if you wish.
Now drag on another view controller which is the one your "Forward" button will push in to view.
Right Click and drag from the bar button to the 2nd View Controller, and choose "Push"
Run the project and you will get a Single view with a Navbar and your button, clicking your button will Push the other view and give you a Back Button to return to the first View Controller. I'll try and post a picture of my storyboard if it helps.
Plasma
I had the same trouble. I wanted to have a navigation controller on each storyboard, so that each could run independently, be individually debugged, and so that the look would be right with the navigation bar.
Using other approaches, I found the UINavigationController would be retained from the original storyboard -- which I didn't want -- or I'd get errors.
Using the AppDelegate in your view controller to set the rootViewController worked for me (borrowing segue naming conventions from Segue to another storyboard?):
- (void)showStartupNavigationController {
NSLog(#"-- Loading storyboard --");
//Get the storyboard from the main bundle.
UIStoryboard *storyBoard = [UIStoryboard storyboardWithName:#"Startup" bundle:nil];
//The navigation controller, not the view controller, is marked as the initial scene.
UINavigationController *theInitialViewController = [storyBoard instantiateInitialViewController];
NSLog(#"-- Loading storyboard -- Nav controller: %#", theInitialViewController);
//Remove the current navigation controller.
[self.navigationController.view removeFromSuperview];
UIWindow *window = [(AppDelegate *)[[UIApplication sharedApplication] delegate] window];
window.rootViewController = theInitialViewController;
To swap views Programatically you would need to select the segue and give it an Identifier like "PushView" then call it like this ....
[self performSegueWithIdentifier:#"PushView" sender:self];
That will programatically do the same as clicking the forward button. I've created you an example project with the code discussed above. Has an -(IBAction) with code in you can use for programatially changing the view.
PushView.zip
I also wanted to do this, present a screen (that had an embedded navigation controller) when the user pushes a button.
At my first attempt, I connected the segue from the button in the fist screen to the Navigation Controller, and the app was crashing with this error "Pushing a navigation controller is not supported".
This is the solution I found:
Select the segue from the button in the first screen to the navigation controller.
If it had an identifier, copy its name. Then delete that segue.
Then create a new segue by CTRL-clicking the button in the first view controller and dragging to the VIEW CONTROLLER YOU WANT TO PRESENT (not to the Navigation Controller that is pointing at it), and select Push in the small pop up window.
Then click the icon in the middle of the segue and paste the name you copied in the first step as an identifier for it.
IB is going to give you a warning "Scene is unreachable due to lack of entry points and does not have an identifier for runtime access via -instantiateViewControllerWithIdentifier:." Don't worry, it works perfectly.
If you want to customize the string that is shown as the Back button to return, you can add this line in the viewDidLoad method OF THE VIEW CONTROLLER THAT IS BEING SHOWED AFTER THE BUTTON IS PRESSED, that is the Child view controller.
(replace "Settings" with the name you need)
- (void)viewDidLoad
{
[super viewDidLoad];
self.navigationController.navigationBar.topItem.title = #"Settings";
...
}
I drag out a toolbaritem in storyboard and set it on my nav controller, but when I run my code it's not there, is there something I'm missing?
EDIT:
Tried setting it in code as well in my viewDidLoad method:
UIBarButtonItem *rightBarButton = [[UIBarButtonItem alloc] initWithTitle:#"Map" style:UIBarButtonItemStyleBordered target:self action:#selector(viewMap)];
self.navigationItem.rightBarButtonItem = rightBarButton;
Won't work either.
Here's how it's set up in my storyboard:
UPDATE:
Just found my problem. In my controller code when I update it's contents I change the right bar button item for a spinner and never set it back to what it had before.
UINavigationController already has a toolbar built in. It has a property toolBarHidden which is set to YES by default, which is why it is not normally seen. If you are using storyboard you can easily make the built-in bottom toolbar visible by checking the checkbox "Shows Toolbar" in the inspector when the Navigation Controller is selected.
See the UINavigationController documentation here for more details.
EDIT:
Ok, it sounds like what you are trying to do is add a right button to your view controller's UINavigationItem. To do this in storyboard, drag a "Bar Button Item" from the Objects Library onto the Navigation Item in your ViewController. You can then set the title/style/etc of the bar button item. If nothing still shows up when you run your app, make sure that your ViewController is connected properly with a segue to the navigation controller.
Also make sure you are adding the Bar Button Item to your view controller's Navigation Item, NOT to the View Controller itself. Here is how the setup should look in your storyboard:
To add an item to a navigation bar, you need to add a Bar Button Item to the Navigation Item contained in the view controller. Go to your storyboard, find the right VC, and find the navigation item (it's in the hierarchy shown in the navigation controller 'scene'). Just drag a Bar Button Item into that hierarchy underneath the nav item, or directly onto the navbar in the visual builder display.
The navigation controller only looks at your VC's nav item when that VC is pushed onto the stack; hence modifying the VC's nav item in viewDidLoad has no effect.
(I've done this programmatically before but I don't have the code with me, so maybe I'll add that later...)
I added a subview to my application. The view controller is a UITableViewController. When I open the .xib file I see the table, but I can't drag a navigation bar onto it. So once the user enters the view, they have no way of getting back to the previous screen. What can be done?
the UITableView nib representation cannot have it. You can simulate the UI in the case you have a navigationController.
If you want to have a navigation controller, your UITableView has to be pushed into the stack of navigationController.
Assuming your view controller is ViewControllerA has a navigationController, then this method will make sure you have navigation controller in your UITableView:
[viewControllerA.navigationController pushViewController:tableViewController animated:YES];