I am running windows server 2008 in vmware workstation and there I have installed sharepoint 2010.
How can I view a sharepoint site from my host machine, so from my windows 7?
Any ideas? Thank you
It depends on the network configuration you assigned to your VM. If you didn't isolate your VM, you should be able to ping it from your host (assuming they share the same network settings - subnet mask, gateway, ip class, ...) and access your SharePoint site from the host.
Also make sure that the native firwall on your server is allowing inbound / outbound connection with the relevant port (at least :80).
Cheers.
Related
I want to access the virtual machine IP in the host (by ping or curl or something), but it is not ok. How could I make it?
The host machine is a win10 PC.
A virtual machine using VMware workstation 15, Ubuntu 16.04 server. It has IP address 192.168.178.138 and 10.0.0.11. I can access the 192.168.178.138, but cannot access 10.0.0.11. (no matter ping or curl...)
All are NAT mode in VMware Workstation.
Now I have a web application running on 10.0.0.11:80. How could I access it in my host machine.
Btw I have another VM with 192.168.178.39 and 10.0.0.31, and this VM can access the 10.0.0.11:80 by curl.
I can show the topo as below.
(A little Chinese but it won't affect reading, just ignore it)
Yes, now I solve this question by myself.
It seems that you cannot use the Host-only mode (Actually I can only use this mode...).
You need to set the virtual interface in your host PC (The IP, gateway, or anything else...);
Then you need to set in the VMWare workstation, set it to use speical lan (VM net 2 for me);
Then you can access it from the host machine and other vm, maybe you need to search something like NAT translation in VMWare workstation to access your web application deployed in the VM from outer network.
That's what I do, now I can access my horizon dashboard in the browser (The Ubuntu server don't have any browser... T-T sad ...)
Settings Picture
I am setting up MDT , where my virtual box VM hosts the server & the deployment share directory.
My client (those which I want to upgrade to Windows 10) need to access the deployment share folder. Clients are across the LAN network .
What changes should i make to enable my client machines to access the folder which is in a virtual machine ?
Configure the network adapter of the virtual machine to Bridge adapter, it will get an ip from the network and then can be accessed from other computers on that network. (If you are using Virtualbox).
Hope it helps.
Regards.
I am running Vagrant and VirtualBox on Ubuntu 14.04. My web app is built with Laravel and uses Homestead.
The application makes a web service call to a machine on my local area network. I can successfully reach the server from my OS web browser.
However, my web application cannot access this web service as it does not appear to be sharing my local network settings.
Based on my Google searches I have tried changing the Network settings in VirtualBox under the "Attached To" setting. Changing Adapter 1 to Bridged Adapter. However, this did not work.
Is there a way to allow my VM to communicate with a web service on my LAN?
aaronfarr,
I have as host Win7_64 with VirtualBox and as VM an openSuse.
With network configured like in the below picture and also inside VM the same proxy settings like on host, I can do same things both on VM and host machine.
I have been trying to setup a Win7 VM on Hyper-v that connects to the internet through my Win 8 host machine.
I can't seem to figure out why the VM can't ever get passed limited connectivity. Any ideas?
NO sure why but all I had to do was Disable/enable the vEthernet adapter and everything worked great!
Check that you have a Virtual Switch with an "External Network" using the Virtual Switch Manager.
The other network types offer VM isolation. If your VM is on an "Private Network" it can only talk to other VMs on the server. The "Internal Network" allows VMs can talk to other VMs and to the host.
In contrast, an External Network allows the VM to contact machines on the network that the host is attached to.
I worked on this issue for a while myself after upgrading to Windows 8.1 and losing connectivity. Added and removed the adapter to no avail. The solution was to upgrade the VM's Integration Services.
I had the same issue because my DHCP settings on my guest VM was setup wrong.
So check the DHCP setting if they are on obtain automatically.
Control Panel\Network and Internet\Network Connections
Network adapter properties -> Internet Protocol Version 4 (TCP/IPv4) -> Properties ->
Obtain DNS server address automatically
I have had great success with Hyper-V and windows 8 and windows 10 virtuals using external switches with a Windows 8.1 host. Unfortunately I could not get the external switch to ever work on windows xp virtual running under Hyper-V. Instead, after reading a lot of sites/suggestions, I followed this guide to bridge an internal virtual switch (with Hyper-V legacy network adapter for XP) to the host wifi. I hope this saves someone else some time when working on an XP virtual.
Using Hyper-V with a Wireless Network Adapter
I am currently on a mac using the pre-installed Apache server.
Now I need to cross-browser test some websites, and therefore I need to access my pages on some other computers. How can I make my localhost-sites accessible for other computers on my WiFi (without uploading to another server)?
Thanks in advance.
Apache server's default configuration should allow other computers (even ones not on your local network) to access whatever it's serving up.
You can access your server from another machine by using the IP address of your server. You can find the IP address of your server by finding a console (this works in Windows and Mac machines) and typing in "ipconfig". (For linux machines, it's "ifconfig".)