I have a WCF service hosted in Azure, I am able to get the wsdl properly but when trying to call a method it gives me the following error.
There was no endpoint listening at
https://pactwp7.cloudapp.net/Service1.svc that could accept the
message. This is often caused by an incorrect address or SOAP action.
See InnerException, if present, for more details.
I have used a self signed certificate while making it https so I have added the following before accessing the service from the client side:
ServicePointManager.ServerCertificateValidationCallback = (sender, cert, chain, error) => true;
Below is the service config that I have used:
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior name="httpsAzureBehavior">
<serviceMetadata httpsGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
<useRequestHeadersForMetadataAddress>
<defaultPorts>
<add scheme="http" port="80" />
<add scheme="https" port="443" />
</defaultPorts>
</useRequestHeadersForMetadataAddress>
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<customBinding>
<binding name="httpsBinding">
<binaryMessageEncoding />
<httpsTransport allowCookies="true" />
</binding>
</customBinding>
</bindings>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true"
aspNetCompatibilityEnabled="true" />
<services>
<service behaviorConfiguration="httpsAzureBehavior"
name="PactServices.ServiceImplementation.PactService">
<endpoint address="" binding="customBinding"
bindingConfiguration="httpsBinding"
contract="PactServices.ServiceContracts.IPactServices"
listenUri="Service1.svc" />
<endpoint address="mex" binding="mexHttpBinding"
contract="IMetadataExchange" />
</service>
</services>
any reasons why?
Did you open the 443 for input endpoint on your CSDEF file?
RDP to your VM and have a local try might helps to identify and debug I think.
Related
I am working on a WCF REST-type service that will accept text/xml type documents via a POST over HTTPS (ASP.NET 4.0 on IIS). Can someone help me with the web.config? I'm testing with the sample code for the CustomTextMessageEncoder to parse the document. I'm getting an error:
"Manual addressing is not supported with message level security. Configure the binding ('CustomBinding', 'http://tempuri.org/') to use transport security or to not do manual addressing."
Unfortunately, if I turn off ManualAddressing, I get a different error. I'm not sure how to turn on TransportSecurity since it's a custom binding.
The main portions of the web.config for what I"m doing are:
<system.serviceModel>
<services>
<service name="MyApp.MyApp" behaviorConfiguration="MyAppBehavior" >
<endpoint address="https://myURL/MyApp/" binding="customBinding" bindingConfiguration="newBinding" behaviorConfiguration="webEndpoint" contract="MyApp.IMyApp" />
<host>
<baseAddresses>
<add baseAddress="https://myURL/MyApp/" />
</baseAddresses>
</host>
</service>
</services>
<serviceHostingEnvironment multipleSiteBindingsEnabled="false" aspNetCompatibilityEnabled="true">
<baseAddressPrefixFilters>
<add prefix="https://myURL/MyApp/" />
</baseAddressPrefixFilters>
</serviceHostingEnvironment>
<behaviors>
<serviceBehaviors>
<behavior name="MyAppBehavior" >
<serviceMetadata httpGetEnabled="false" httpsGetEnabled="True" httpsGetUrl="https://myURL/MyApp/MyApp.svc/" />
<serviceDebug includeExceptionDetailInFaults="True" />
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="webEndpoint" >
<webHttp />
</behavior>
</endpointBehaviors>
</behaviors>
<extensions>
<bindingElementExtensions>
<add name="customTextMessageEncoding" type="Microsoft.Samples.CustomTextMessageEncoder.CustomTextMessageEncodingElement, CustomTextMessageEncoder" />
</bindingElementExtensions>
</extensions>
<bindings>
<webHttpBinding>
<binding name="webHttpBinding">
<security mode="Transport" />
</binding>
</webHttpBinding>
<customBinding>
<binding name="newBinding" >
<security authenticationMode="AnonymousForCertificate" />
<customTextMessageEncoding messageVersion="Soap12WSAddressing10">
</customTextMessageEncoding>
<httpsTransport manualAddressing="true" requireClientCertificate="true" />
</binding>
</customBinding>
</bindings>
</system.serviceModel>
I'm using a duplex ReliableSecureProfile in WCF and the server will stop listening to new requests if an exception occurs on any client.
How can I make the server more resilient to failures that happen to any single client? Everything works again if I restart the server or redeploy
My client code looks like this:
CustomBinding rspBinding = new CustomBinding();
rspBinding.Elements.Add(new ReliableSessionBindingElement());
rspBinding.Elements.Add(new MakeConnectionBindingElement());
rspBinding.Elements.Add(new TextMessageEncodingBindingElement());
rspBinding.Elements.Add(new HttpTransportBindingElement());
DuplexChannelFactory<IProcessDataDuplex> channelFactory =
new DuplexChannelFactory<IProcessDataDuplex>
(new CallbackHandler(), rspBinding, serviceAddress);
//
// The problem always occurs on this line.
//
reusableSW = new LC.Utils.WCF.ServiceWrapper<IProcessDataDuplex>(channelFactory);
My web.config looks like this:
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior name="rspServiceBehavior">
<serviceMetadata httpGetEnabled="true" policyVersion="Policy15" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
<behavior name="">
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
<useRequestHeadersForMetadataAddress>
<defaultPorts>
<add scheme="http" port="80" />
<add scheme="https" port="443" />
</defaultPorts>
</useRequestHeadersForMetadataAddress>
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<customBinding>
<!-- Reliable Secure Profile -->
<binding name="rspBinding">
<reliableSession />
<MakeConnectionBindingElement/>
<textMessageEncoding />
<httpTransport />
</binding>
</customBinding>
<netTcpBinding>
<binding portSharingEnabled="true" >
<security mode="None" />
</binding>
</netTcpBinding>
</bindings>
<extensions>
<bindingElementExtensions>
<!-- Reliable Secure Profile -->
<add name="MakeConnectionBindingElement" type="Microsoft.Samples.ReliableSecureProfile.MakeConnectionElement, Microsoft.Samples.ReliableSecureProfile.MakeConnectionChannel" />
</bindingElementExtensions>
</extensions>
<services>
<!-- Reliable Secure Profile -->
<service behaviorConfiguration="rspServiceBehavior" name="Microsoft.Samples.ReliableSecureProfile.RSPService">
<endpoint binding="customBinding" bindingConfiguration="rspBinding"
contract="Microsoft.Samples.ReliableSecureProfile.IProcessDataDuplex"
listenUriMode="Explicit">
</endpoint>
<endpoint address="mex" binding="mexHttpBinding" bindingConfiguration=""
contract="IMetadataExchange" />
<host>
</host>
</service>
<!--<service name="WcfTcpTest.Service1" >
<host>
<baseAddresses>
<add baseAddress="net.tcp://localhost:1337/Service1/" />
</baseAddresses>
</host>
<endpoint address="" binding="netTcpBinding" contract="WcfTcpTest.IService1">
<identity>
<dns value="localhost"/>
</identity>
</endpoint>
<endpoint address="mex" binding="mexTcpBinding" contract="IMetadataExchange"/>
</service>-->
</services>
<protocolMapping>
<clear/>
<!-- removes all defaults which you may or may not want. -->
<!-- If not, use <remove scheme="http" /> -->
<add scheme="http" binding="customBinding" bindingConfiguration="rspBinding"/>
</protocolMapping>
<serviceHostingEnvironment
aspNetCompatibilityEnabled="false"
multipleSiteBindingsEnabled="true" />
</system.serviceModel>
I can't reproduce this issue anymore (where the server simply stops responding). I think the issue is related to VS2010's desire to catch handled exceptions and stop all threads as explained here:
Getting an Unhandled Exception in VS2010 debugger even though the exception IS handled
I'm trying to setup a wcf service to use net.tcp over IIS 7.
Here is the error I get:
There was no endpoint listening at
net.tcp://127.0.0.1:8000/ListingService
that could accept the message. This is
often caused by an incorrect address
or SOAP action. See InnerException, if
present, for more details.
Here is the code I call from the client:
using (var client = new ListingServiceClient("NetTcpBinding"))
{
client.Test();
client.Close();
}
Here is my services web.config - http://pastebin.com/3S8BZbup
<system.serviceModel>
<bindings>
<netTcpBinding>
<binding portSharingEnabled="true">
<security mode="None" />
</binding>
</netTcpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="default">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="true"/>
<!--throttle service-->
<serviceThrottling
maxConcurrentCalls="10000"
maxConcurrentSessions="10000"
maxConcurrentInstances="10000" />
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service behaviorConfiguration="default" name="Housters.Services.ListingService">
<endpoint name="TcpEndpoint"
address="net.tcp://127.0.0.1:8000/ListingService"
binding="netTcpBinding"
contract="Housters.Services.IListingService" />
</service>
</services>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
And here is my client app.config - http://pastebin.com/YpiAhh46
<system.serviceModel>
<bindings>
<netTcpBinding>
<binding name="NetTcpBinding">
<security mode="None"/>
</binding>
</netTcpBinding>
</bindings>
<client>
<endpoint
address="net.tcp://127.0.0.1:8000/ListingService"
binding="netTcpBinding" bindingConfiguration="NetTcpBinding"
contract="ListingServiceProxy.IListingService" name="NetTcpBinding" />
</client>
</system.serviceModel>
Any ideas?
This configuration will not work in IIS/WAS. When hosting in IIS you need .svc file (or configuration based activation in WCF 4) and address of the endpoint is always VirtualDirectoryPath + SvcFile + Relative address specified in endpoint configuration. Setting absolute address in endpoint configuration is for self hosting.
I have a web service in asp.net running and everything works fine. Now I need to access some methods in that web-service using SSL. It works perfect when I contact the web-service using http:// but with https:// I get "There was no endpoint listening at https://...".
Can you please help me on how to set up my web.config to support both http and https access to my web service. I have tried to follow guidelines but I can't get it working.
Some code:
My TestService.svc:
[ServiceContract(Namespace = "")]
[AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)]
public class TestService
{
[OperationContract]
[WebGet(ResponseFormat = WebMessageFormat.Json)]
public bool validUser(string email) {
return true;
}
}
My Web.config:
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
<behaviors>
<endpointBehaviors>
<behavior name="ServiceAspNetAjaxBehavior">
<enableWebScript />
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior">
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
<behavior name="">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="false" />
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service behaviorConfiguration="ServiceBehavior" name="TestService">
<endpoint address="" behaviorConfiguration="ServiceAspNetAjaxBehavior"
binding="webHttpBinding" bindingConfiguration="ServiceBinding"
contract="TestService" />
</service>
</services>
<bindings>
<webHttpBinding>
<binding name="ServiceBinding" maxBufferPoolSize="1000000" maxReceivedMessageSize="1000000">
<readerQuotas maxDepth="1000000" maxStringContentLength="1000000" maxArrayLength="1000000" maxBytesPerRead="1000000" maxNameTableCharCount="1000000"/>
</binding>
</webHttpBinding>
</bindings>
</system.serviceModel>
Instead of using the webHttpBinding, try creating a customBinding instead:
<customBinding>
<binding name="poxBindingHttps" closeTimeout="00:00:20">
<textMessageEncoding writeEncoding="utf-8" />
<httpsTransport manualAddressing="true"/>
</binding>
<binding name="poxBindingHttp" closeTimeout="00:00:20">
<textMessageEncoding writeEncoding="utf-8" />
<httpTransport manualAddressing="true"/>
</binding>
</customBinding>
You'll also need to setup the webHttpBehavior like so:
<behaviors>
<endpointBehaviors>
<behavior name="ajaxBehavior">
<enableWebScript/>
<webHttp/>
</behavior>
</endpointBehaviors>
</behaviors>
And finally, your service & endpoint:
<services>
<service name="TestService">
<endpoint name="sslDefault" address="" binding="customBinding" bindingConfiguration="poxBindingHttps" behaviorConfiguration="ajaxBehavior" contract="TestService"/>
<endpoint name="noSslDefault" address="" binding="customBinding" bindingConfiguration="poxBindingHttp" behaviorConfiguration="ajaxBehavior" contract="TestService"/>
</service>
</services>
Hopefully that works out for you in creating an SSL endpoint
It sounds like there is more an issue with IIS no listening on port 443 (The port used for HTTPS). Check IIS that there is a certificate installed and that it is listening on the secure port.
I'm trying to configure AspNetMembershipProvider to be used for authenticating in my WCF service that is using basicHttpBinding. I have following configuration:
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" />
<bindings>
<basicHttpBinding>
<binding name="basicSecureBinding">
<security mode="Message"></security>
</binding>
</basicHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="MyApp.Services.ComputersServiceBehavior">
<serviceAuthorization roleProviderName="AspNetSqlRoleProvider" principalPermissionMode="UseAspNetRoles" />
<serviceCredentials>
<userNameAuthentication userNamePasswordValidationMode="MembershipProvider" membershipProviderName="AspNetSqlMembershipProvider"/>
</serviceCredentials>
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service behaviorConfiguration="MyApp.Services.ComputersServiceBehavior" name="MyApp.Services.ComputersService">
<endpoint binding="basicHttpBinding" contract="MyApp.Services.IComputersService" />
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
</service>
</services>
</system.serviceModel>
Roles are enabled and membership provider is configured (its working for web site).
But authentication process is not fired at all. There is no calles to data base during request, and when I try to set following attribute on method:
[PrincipalPermission(SecurityAction.Demand, Authenticated = true)]
public bool Test()
{
return true;
}
I'm getting access denied exception. Any thoughts how to fix it?
Try this CodePlex Security Guide, the How Tos and Application Scenarios have detailed setup and configurations guides for a number of configuration options that might help you find the missing piece of your puzzle.