I am new to selenium web testing. Could you tell me how to learn it step by step, and what the technologies are that I need to study?
I suggest you download Selenium IDE or Se Builder, which are user interfaces for recording Selenium tests in-browser. Both let you record and then export tests to a bunch of different languages.
One important thing to note is that there's two Seleniums: original Selenium 1, where tests are comprised of a list of steps to execute in order, and Selenium 2 / Webdriver, which is an API for programming tests.
(Full disclosure: I'm the main developer on Se Builder, so I'm totally biased towards it. I do think it's probably less intimidating for a newcomer, but Selenium IDE is as of time of writing the more established and standard IDE. :) )
UPDATED: Additional resources listed below
The record and playback tools Zarkonnen called out are good starts. You also need to understand the fundamentals of Selenium itself. There's good information on writing tests in code on Selenium HQ's documentation pages.
Three things I think important to get correct from the start:
Learn about locators on pages, learn how to store them in one location (read up on the Page Object Pattern and be careful about record/playback tools which may not help you in that approach)
Learn how to deal with dynamic content (AJAX) with implicit and explicit waits
Learn about modular tests. Write small, reusable components.
If you're working in Ruby then I'd really recommend having a look at Cheezy's page_object gem.
Also, have a look at the various intro pages on the Google WebDriver project page.
Update: You should also consider having a look at Dave Haeffner's Elemental Selenium and his Selenium Guidebook. Both are great resources for real-world stuff people struggle with, not facile, shallow examples.
Related
is there any tool out there that i can used to set-up run automatically and i was goggling and i found selenium test runner? there are so many tools out there its hard to figured out which is best
I'm using C# and using MSTest as a test framework and I'm looking forward to see if I can get a way from testing in MSTEST
any help?
This is very subjective question. Every requirement will have its own correct answer. Anyhow I will try to address few requirements and will be updating as I learn more.
If you are automating web app browser tests (sans flash player and silverlight) I would say that selenium is the way to go. There are ways to automate flash and silverlight too, but that is answer for another question.
Selenium is anyways an automation too and your choice will rather is of which test framework to select. So here are few options:
1. Integrating with CI tools:
If you want to organize your tests as segregated atomic units and want them to be integrated to some CI server (e.g. TeamCity). I will recommend using NUnit to run your selenium tests.
2. Behavioral Tests
It is a new trend in the software development and how we test our products. Using behavioral (i.e. business specification) like language. In my experience it is also a very good format to write up acceptance tests. You can use selenium with something like Nbehave or SpecFlow
3. Centralize Test management and Execution
Now this might not fit for everyone but I have found FitNesse (and its c# binding) to be very useful in maintaining and executing selenium test cases.
Please note this answer may not be right and is certainly not complete given the scope of the question. I have nevertheless tried provide few pointers.
I am new to Selenium and have spent about a week using IDE. So far, so good. However, some other parts of our application involve heavy drag-n-drop capabilities, and I'm not so sure about that...which brings me to my question...what type of specific things can WebDriver do that the IDE cannot do? I read the Selenium front page, and know that WebDriver can make more "robust" tests, but I'm not entirely clear what robust means in this context? Longer? More capabilities?
What I'm looking for is what type of particular tests could be run with WebDriver that couldn't be run in the IDE? And are any of them related to drag-n-drop? This will inform my decision about whether to keep on using the IDE or to switch over. I think it's better to use something from the beginning than to create a lot of tests and then switch over.
Thanks much in advance.
You can use the full features of your chosen language. For example, using the IDE you are stuck to using the IDE's API, however if you choose to use the WebDriver explicitly you can combine it with C# and use C#'s full features (such as LINQ).
A few of the IDE commands are not directly converted with the WebDriver.
You can integrate a pure WebDriver test into a CI (Continuous Integration) server.
It is not limited to just Firefox, whereas the IDE is (since the IDE is only available in Firefox).
You can improve and extend Selenium more easily. For example using Extension methods and inheritance. (For instance, extending Selenium so that whenever it cannot find an element, it takes a screenshot of the page)
It will be more robust, as the IDE will not always give you the most reliable way of finding an element. For instance, if the element you require is nested within a table, the XPath that the IDE will give you will infer directly to specific table rows and cells.
For instance something like this:
//table[1]/tr[1]/td[2]/table[1]/tr[1]/td[3]/a[1]/b
Is not the most reliable XPath in the world. Those without any knowledge of XPath or automated testing or how Selenium works, will stick with that and then waste hours figuring out why this XPath query fails. Others will change it, and just use the XPath as a base query.
The IDE should usually be used for those who don't have much programming knowledge (e.g some testers), if you want your developers and/or the test developer's to use Selenium, go directly with the WebDriver. It will feel more like programming with a fully-fledged language instead of scripting (after all, the scripts that the IDE generates are purely HTML files). The idea is generally for those who don't have much programming knowledge to simply hit 'play' and let Selenium do the work.
Drag-and-drop are applicable within the IDE and WebDriver.
Most of the development in Selenium (it seems) goes into extending the WebDriver code, the IDE may be left behind in some new features.
Using WebDriver directly, you can also use the full features of a unit testing framework (usually NUnit with C# or Junit/TestNG for Java). This allows things like repeating tests for each browser (i.e repeating tests in Chrome, Firefox and IE) or defining certain logic before and after tests (i.e adding user memberships, creating users, setting up other test data).
Fellow developers might be more inclined to help out if it is using a programming language as opposed to a scripting language (ie WebDriver is programmed in a programming language, the IDE scripts are just HTML files). Putting it in your solution and having it as part of the nightly build process helps to ensure developers help out in your tests progression.
Thinking about it, another example is a bug is fixed but introduces a new bug which causes your test to fail. Who's responsibility is it to fix the test? You or them? Having it use WebDriver directly, they can just look up the source code to Selenium and figure out the API usage themselves. With the IDE, it is literally a HTML file that calls some javascipt. Not much documentation on it.
To sum up: if you don't have much programming experience, either learn a language and use WebDriver with it directly, or just stick with the IDE. Either will do the job.
IDE cannot be used for serious automation. I would sussgest learn the API and use it with Java/C#/Python. It will help you churn out some good automation and will payback really well.
You can always use the IDE to learn how the code is generated.
Hi I want differences between architectures of selenium RC and webDriver.
I read lot of functional differences but did not find anything for architecture differences.
If anyone can send/post links of differences that will really appriciate.
Thanks in advance
The difference is quite substantial.
Selenium RC works only using JavaScript for its every command. That means that everything you write is eventually translated into Javascript and run in the browser. This approach has several pros and cons - it should work the same way in every browser, but is limited to "same origin policy" and to JavaScript limitations.
http://seleniumhq.org/docs/05_selenium_rc.html#how-selenium-rc-works
WebDriver actually uses each browser's own and native API's to work with them. That means that it sometimes needs direct help from browser development team, sometimes fails on a new browser version release, sometimes behaves slightly differently on different browsers (but hey, on IE, js was also not the most reliable thing), but is a much stronger tool overall. It should be faster, it should allow for much more complex work without any js limitations.
http://seleniumhq.org/docs/03_webdriver.html#how-does-webdriver-drive-the-browser-compared-to-selenium-rc
Note that while Selenium RC has been oficially deprecated, the WebDriver is now being developed rapidly and it still suffers from several child-illnesses and is not in its full strength. That said, using WebDriver, you can do anything Selenium RC can do. And sometimes more. With an occasional minor bug.
here you can Selenium Webdriver Architecture
http://qeworks.com/selenium-webdriver-architecture/
you can also find diff. between RC and webdriver below
http://qeworks.com/difference-between-selenium-rc-and-selenium-webdriver/
Though there are many advantages of Page Project Model, some of them worth mentioning are :
Simple and clear page classes with sensible method names.
You can actually give the customize names to you methods. Like above so that you need not to keep anything in mind.
Just looking into the method name gives you all idea about the capabilities of the method.
Makes tests more readable. In comparison to above commands of selenium , where in you need to add all the commands in the tests scripts . in page object model you need to put method names. The methods which you have created according to your understanding of application so these methods name are more readable and easy to understand.
Stay [DRY]
Page object model believes in the principle of Do not repeat yourself.
Good support of tests, because everything is stored in one place.
Easy creation of new tests. In fact, tests can be created by a person not knowing the features of automation tools.
As I have actually implemented it in my project so definitely there are some flaws:
All locators should be kept in page class file.
And this abstraction leads to some chaos with in the Page Class file.
So you need to implement something like key word driven on top of Page Object Model so as to fully take the advantages.
I've moved from SeleniumRC to WebDriver for nearly two years. But I have to say that I haven't felt there's any obvious advantages for webdriver over rc.
Now I have 200+ test cases with C# driver against a website. But when I run them thoroughly for regression testing, I usually get 150 passed and 50+ failed/errored. After running failed test cases for the second time, many of them passed, only few of them were proven to be issues with the testing code.
As I can see it, sometimes WebDriver is really performing slowly, while I never met with such a situation when I was using SeleniumRC before.
As a result, I started to doubt the necessity to move from rc to webdriver, because it took much more time for me to verify errors and failures than before.
So my question is, are there any advantages for webdriver over rc to make it worth it to move from rc to webdriver? If so, can you please kindly tell me? Also, tell me about the disadvantages.
Selenium RC injects Javascript into the page to drive the interactions. Webdriver interacts directly with the browser. Injecting additional Javascript has disadvantages, with the Selenium HQ site stating it rather well.
While Selenium was a tremendous tool, it wasn’t without its drawbacks.
Because of its Javascript based automation engine and the security
limitations browsers apply to Javascript, different things became
impossible to do. To make things “worst”, webapps became more and more
powerful over time, using all sorts of special features new browsers
provide and making this restrictions more and more painful.
http://seleniumhq.org/docs/01_introducing_selenium.html#selenium-history
Another way to think about it is that testing a page that has had more JS added, you're not really testing the original page; you're testing a modified page.
What #OCary said.
However, the new and more powerful WebDriver has some limitations, too. Because it is a work-in-progress, it's behaviour between different versions changes slightly from time to time. Also, not nearly all intended features have been implemented yet, it will take some more time to have it stable, bug-free and fully developed. For example: the SafariDriver has just landed, the window controls are missed, you can't download files in a convenient way etc.
But a healthy development on WebDriver is better than today's non-existant development on Selenium 1 (It just won't get any better.), right?
From my experience Selenium RC is the most stable and robust web testing framework I have used. I recently started evaluating WebDriver (aka Selenium 2) for the reason that everybody says it is the future of Selenium. So far I am not impressed. Simple things (like clicking a button) do not work consistently across different browsers and require different workarounds.
I realize that there are limitations in what you can do with JavaScript, but I would not want to sacrifice the stability of my tests to get over those limitations.
I will start using JBehave Web to create tests for a web applications, I've been checking and I saw that Selenium now integrates WebDriver api besides the original one from Selenium.
My question is, which one should I use? The application needs to be tested on Firefox and Internet Explorer and has some Ajax functionalities (although nothing too complex)
Also any reference to some good tutorial or book would be greatly appreciated!
The old Selenium (1.0) API is not really being developed any more, it's all about WebDriver now in Selenium 2.0. I recommend it for future-proofing your code.
Use whichever you feel more comfortable with. The WebDriver API has only recently settled down in Selenium 2.0RC3, while the Selenium RC API hasn't been changed at all in at least a year. artbristol is right that the RC API (what he calls 1.0) isn't being developed further, but it's not going away any time soon either.
As to books, there are two very good ones. Both are great beginner’s books for Selenium and a great deal . Both are available in paperback and as e-books. And if you want to peek at them, both authors or their publishers offer partial downloads for free. The e-book prices are very reasonable, and the paperback prices are competitive.
David Burns’ Selenium 1.0 Testing Tools: Beginner’s Guide, free sample at https://www.packtpub.com/sites/default/files/0264OS-Chapter-6-First-Steps-with-Selenium-RC.pdf?utm_source=packtpub&utm_medium=free&utm_campaign=pdf
Alan Richardson’s Selenium Simplified - Automated Web Testing with Java and Selenium RC, free sample at https://docs.google.com/leaf?id=0B2l9DD6OObL9MGQ3NGU4ODYtZmJlYi00MGY1LWIwNDUtZmM2N2UxODU4OWNm&sort=name&layout=list&num=50).
As far as I know, since the two projects (selenium and webdriver) are merged, the underlying infrastructure is the same. So you shouldn't gain speed by using one API instead of another. You should use the API you like most.
My opinion is that the webdriver API is more convenient. It's much more convenient to use objects and not write procedural code. It shortens your xpaths and makes code easier and much more elegant. Plus, it's easier to write page objects when your working constantly with objects.