I just downloaded TeamCity 7 today and decided to get it up and running for my Azure solution. I am not trying to do anything fancy (yet) and started with a very basic command line build:
msbuild /t:Publish /p:Configuration=Release;TargetProfile=Production;PublishDir=S:\HoursTracker\Deployments
This builds successfully and produces a package that looks like this*:
I then attempted to configure TeamCity in an identical fashion:
This builds successfully and produces a package that looks like this*:
What I don't understand is why there is such a huge discrepancy in the size of the MVC project. Publishing directly from Visual Studio produces the exact same result as my MSBuild command so I'm convinced that TeamCity is the odd man out. Since I assume TeamCity is not broken, can someone please educate me on how to properly configure it so that I get the expected output?
*I have renamed the package files with .zip so that the details were viewable for this post.
Ming's answer helped me solve the mystery. After inspecting the contents of the zip files, I discovered the difference was that my MSBuild package contained bin and obj folders and the TeamCity package did not.
After making this discovery, I realized that I could specify multiple targets to MSBuild and prepended "Clean" to my targets switch like so:
msbuild /t:Clean;Publish /p:Configuration=Release;TargetProfile=Production;PublishDir=S:\HoursTracker\Deployments
As expected, this removed those folders. So apparently, TeamCity specifies "Clean" implicitly for you. Mystery solved.
Windows Azure packages may be larger than we expect. You can rename the cssx file to zip and you will find out what’s inside the package. In addition to the web application’s usual files, there’re a bunch of Windows Azure files. For example, if you enable diagnostics, you will see a diagnostics folder, where you’ll find files used by Windows Azure diagnostics runtime.
Best Regards,
Ming Xu.
Why you specified x64 for msbuild runner? Try selecting tools version as well. You have not specified /p:Platform parameter. Does publish task involve rebuild?
TeamCity starts msbuild with number of /p: parameters taken from " properties and environment variables " section, plus some well-known parameters like configuration name or project name.
Related
We have an MSBuild task that builds our *.sqlproj file, the output of which is loaded back into TeamCity as an artifact for subsequent deployment.
Similar to this user, we are having some unpredictable output file naming happen:
Invalid file names when trying to deploy SSDT project with TeamCity 8
It appears that sometimes, it produces this output file under /bin/Release:
MyProj.sqlproj.dacpac
Then subsequent builds produce this file in the same folder:
MyProj.dacpac
We haven't done indepth testing yet - I was wondering if anyone else has seen similar or has a suggested troubleshooting path?
To be clear, it's the same task, running the same command against the same project - just run repeatedly overtime as new checkins happen.
Sounds like you have conflicting .sqlproj files being checked in.
I'd start by checking the history.
Well, after looking more closely at the build log I could see that the TeamCity MSBuild runner appears to be creating some temporary virtual project files (or something, I don't know for sure because they get deleted) with names like:
MyProj.sqlproj.teamcity
I theorized that this may be confusing MSBuild or one of the targets related to building dacpacs, so I replaced the TeamCity MSBuild build step with a Command Line build step that calls MSBuild on the original project file itself, and this appeared to solve the problem. It now produces the dacpac with the file I'm expecting.
I don't have time to dig further now, but I could believe that there's some logic in the chain somewhere that is deriving the name for the final *.dacpac from the name of the project file being used. My guess is that it just strips off everything after the last "." and attaches the ".dacpac" suffix.
I don't fully know why it would occasionally create a *.dacpac file with the correct name, but I was at times doing a manual build in the TeamCity agent work folder from the commandline on the build server itself, so this may have just been a file leftover from previous executions.
We're pretty new to TeamCity at work. We have a build & deployment pckage setup which is using MSBuild/MSDeploy to ship changes to our web servers. However, we have a few issues (apologies for putting a few questions on the same post). For clarification our solutions looks like so:
Project Folder
WebApp (includes .csproj file. Includes a folder called "media" - this folder is not in SVN)
Libraries (includes referenced assemblies)
Our issues:
There is a specific folder within the Libraries folder that must be copied into the bin directory after build (because of an assembly redirect). We have always used a PostBuild event, however this doesnt work in TeamCity.
The folder "media" within the WebApp folder is not included in SVN. When the TeamCity package is executed it deletes this folder. I would like to prevent TeamCity from deleting just this folder.
When we run the TeamCity task, we get an ERROR_FILE_IN_USE error for one of the files teamcity is trying to delete during the sync task. I have read about using the app_offline.htm file to combat this - but quite how Im not sure.
I'm going to guess that some of these settings can be command line parameters in the msbuild job - I think it would be better to store these in the csproj file rather than just in teamcity if it is possible?
thanks in advance
Al
A few questions on the information provided
Can you clarify what you mean by post-build command doesnt work? Does it fail or does it just not do what you expect?
How have you setup your post-build command? does it reference specific filepaths? TeamCity executes MSBuild in the same was as you could from the command line or from visual studio.
Regarding the MSDeploy folder issue, you can configure MSDeploy with a Skip Action, here's a link to another post describing how to do this
Prevent MSDeploy (selectively) from deleting folders on target IIS server
Because MSDeploy is trying to deploy into a folder being used by IIS you are also seeing the file locking issue. There are two solutions
1. Add a teamcity step to stop IIS (using PowerShell) before deploying. This will cause downtime.
2. Deploy to a different folder and then switch IIS to point to your new folder. This is a much better solution as you also have roll back.
A much easier solution to all of this is to use a Deployment Tool such as Octopus Deploy to deploy your application. You can learn more about Octopus Deploy at http://octopusdeploy.com/
I am setting up TeamCity to deploy our Website Project application (using a *.wdproj) and Web Deploy application to IIS.
I have a build configuration that uses MSBuild.exe with the MSDeployPublish to build and then deploy the application.
We now want to get the application to deploy to multiple target environments, therefore need a way to supply different settings based on the target environment.
I have added a parameters.xml file to the Web Deployment Project, and have verified that the parameters set in here are making all the way through the target IIS server and being correctly applied - great!
Now what I want to do is have different parameter settings per environment. I was hoping I could use something like the MSDeploy.exe -setParam argument to specify different values for each environment, however I can find no way to get my parameter values into MSBuild via the commandline.
I suspect I might need to do one of the following:
Split MSBuild and MSDeploy into separate build steps.
Configure a task somewhere in the pipeline to take 1 of n versions of parameters.something.xml and move it into parameters.xml so it gets picked up by the rest of the pipeline.
I'm looking for the simplest way to move ahead at this point, any suggestions welcome.
For reference, here is the command I'm experimenting with now:
msbuild /target:MSDeployPublish MySite_deploy.wdproj /P:Configuration=Debug
/P:DeployOnBuild=True /P:DeployTarget=MSDeployPublish
/P:MsDeployServiceUrl=www.myserver.com:8172/MsDeploy.axd
/P:AllowUntrustedCertificate=True /P:MSDeployPublishMethod=WMSvc
/P:CreatePackageOnPublish=True /P:UserName=MyUser /p:Password=MyPassword
/P:DeployIisAppPath=www.myserver.com/MySite
/P:ServerURL=http://www.tryingtoforcethis.com
It's working beautifully except the value for ServerURL, which is a parameter I've defined in my parameters.xml, is not making its way into the target site. The default I specified in parameters.xml, however, is. So I know that the parameters are working, I just can't figure out how to add them to the msbuild commandline.
Well, I think the short answer is that with MSBuild 4.0 and VS2010, you can't just pass arbitrary parameters into MSDeployPublish from the call to MSBuild.
I found these posts helpful:
http://forums.iis.net/t/1167657.aspx/1 - Ming Chen's comments
http://www.hanselman.com/blog/TinyHappyFeatures3PublishingImprovementsChainedConfigTransformsAndDeployingASPNETAppsFromTheCommandLine.aspx - the comments from Richard Szalay at the bottom
After reading these, and sifting through the Microsoft.Web.Publishing.targets file for some time trying to find a "way in", I finally settled on having multiple copies of Parameters.xml in my project folder in source control, labelled according to their environment eg:
Parameters.Test.xml
Parameters.Staging.xml
Parameters.Live.xml
Then, prior to the package and deploy, I just copy one of these files into Parameters.xml and it gets picked up by the rest of the pipeline - done!
BTW I had a temporary problem getting the parameters.xml copy and subsequent cleanup to work within a single MSBuild.exe call due to what seems to be some sort of file access issue, I've detailed it here:
MSBuild.exe Copy task not working properly unless a version of the file already appears in target
To answer your question, the parameterization of your command line is not a concern of MSBuild. Instead, you should utilize external tools. For example, if you run your msbuild command from a batch file you could pass the parameters to the batch file and run it for each environment with different parameters. Another approach is to use a build system like TeamCity or VSTS and utilize their parameterization mechanism. Adapted for the VSTS or TFS, your command could look like this:
msbuild MySite_deploy.wdproj /target:MSDeployPublish /p:Configuration=Debug
/p:DeployOnBuild=True /p:MsDeployServiceUrl=$(IIsHostNameIp)
/p:AllowUntrustedCertificate=True /p:MSDeployPublishMethod=WMSvc
/p:CreatePackageOnPublish=True /p:UserName=$(IIsUserName) /p:Password=$(IIsPassword)
/p:DeployIisAppPath=$(IIsSite)
In addition, I would suggest some clean up for your origianl command line:
Using both /p:target and /p:DeployTarget is redundant. Any one of them is enough. Also it could be replaced with /p:WebPublishMethod.
For /p:MSDeployServiceUrl it is enough to only provide a DNS name or IP. the port and the Url is automatically derived from the /p:MSDeployPublishingMethod=WMSVC.
The custom parameter /p:ServerURL is unknown and won't be mapped anywhere.
msbuild.exe {build-script.proj} /property:{someParameter=someValue}
In your build script you can use $(someParameter) as a variable
I am trying to set different artifact paths configuration wise. e.g
In general settings of teamcity I am specifying following artifact paths:
testing\obj\Deploy-Dev\package
testing\obj\Deploy-Test\package
testing\obj\Deploy-Live\package
But when I am publishing a site using the following:
/M /P:Configuration=%env.Configuration% /P:DeployOnBuild=True/P:DeployTarget=MSDeployPublish /P:MsDeployServiceUrl=%env.TargetServer%/MsDeployAgentService /P:DeployiisAppPath=%env.IISPath% /P:MSDeployPublishMethod=RemoteAgent /P:CreatePackageOnPublish=True /P:Username=%env.username% /P:Password=%env.password%
In this step I am using only 1 configuration. I am assuming that by specifying these artifact paths. it will also transform the web configs according to specified configuration. But it is only transforming the one specified while actually packaging.
Any idea how to have web configs transformed in all packages as well.
I am not sure if I fully understand your question but here is what I think that you are asking. "How can I create a web package which has all the web.config transforms required so that I can publish the same package to multiple different environments?"
Unfortunately the way that packaging works is that the web.config is transformed using the web.config transform of the build configuration which is being built. Then the transformed web.config file makes it into the package. The transform files are not packaged.
I do realize that it's important to create a single package and publish that to different locations. We were not able to build the features into the box but I have created a NuGet package, PackageWeb, which can help in this case. I have a 5 minute video posted at http://sedodream.com/2012/03/14/PackageWebUpdatedAndVideoBelow.aspx which you can take a look at. I am fairly certain that it will help in your scenario. FYI the code for package-web is open source at https://github.com/sayedihashimi/package-web. We do have some known issues. If you do end up using this please do let me know.
Try setting a environment variable for your teamcity artifact path.
testing\obj\%env.Configuration%\package
Troy Hunter -You're deploying it wrong! TeamCity, Subversion & Web Deploy part 5: Web Deploy with TeamCity
Artifact paths do not affect build\packaging process anyhow. They just provide ability to keep some files\folders available after build for further access.
If you want to produce 3 different packages, you will need to specify 3 corresponding build steps in your configuration and get rid of '%env.Configuration%'.
We have a very large solution (some 300+) projects and we are trying to build it via MSBuild on TFS2010.
We can build it via MSBuild on all out development machines, and are in the process of adopting TFS.
The structure of our code is like so:
bin\Client
bin\Server
Framework\ClientFramework.csproj
Modules\Module1\Project1
Modules\Module2\Project2
etc.
Each project has a relative OutputPath which builds the code to the bin Client or Server directory. So for example, Project1.csproj has an OutputPath of "..\..\bin\Client".
We seem to be having a problem that in TFS MSBuild the OutDir is set to a Fixed Path:
C:\Builds\MyProject\Binaries\
So things are getting confusing when resolving the relative OutputPath on top of the OutDir
ClientFramework goes to C:\Builds\MyProject\Binaries\..\bin\Client
Project1 goes to C:\Builds\MyProject\Binaries\..\..\bin\Client
etc.
We also have some Post build events that copy some 3rd Party dll's to the bin folders, these paths cannot be resolved properly either.
I think the solution we are after is to build everything to our existing bin\Client, bin\Server structure and then move the Folders from bin to Binaries.
Any ideas on how to accomplish this or how we should be working, are appreciated, but updating our existing projects might prove problematic, as it all works with VS, developer command line builds and with CC.net.
Since this is first link that pops up with a Google search of "TFS OutDir", I must provide a newer solution. I spent an entire day playing around with OutDir, OutputPath, and overriding them with TeamBuildOutDir. A better solution is to set the MSBuild property GenerateProjectSpecificOutputFolder. It comes with .NET 4.5. More info here: http://blog.codeassassin.com/2012/05/10/override-the-tfs-team-build-outdir-property-net-4-5/
I found the answer on MSDN : http://msdn.microsoft.com/en-us/library/ff977206.aspx