Could anyone tell me how to get around this problem highlighted?
I have got no problem downloading subtitles, yet with downloading programmes.
I've used UKBestVPN services. Downloading subtitles no problem so it shouldn't be any problem with the VPN service. Some said I needed to set up port 10060 in Win 7. I did in the Firewall Advanced Setting but the error occurred again.
Thank you.
C:\Program Files (x86)\get_iplayer>get_iplayer --pid b01fkbb3
get_iplayer v2.80, Copyright (C) 2008-2010 Phil Lewis
This program comes with ABSOLUTELY NO WARRANTY; for details use --warranty.
This is free software, and you are welcome to redistribute it under certain
conditions; use --conditions for details.
INFO Trying to stream pid using type tv
INFO: pid found in cache
Matches:
524: Newsnight - 02/04/2012, BBC Two, News,TV, default,
INFO: 1 Matching Programmes
INFO: Checking existence of default version
INFO: flashhigh1,flashhigh2,flashstd1,flashstd2 modes will be tried for version default
INFO: Trying flashhigh1 mode to record tv: Newsnight - 02/04/2012
INFO: File name prefix = Newsnight_-_02_04_2012_b01fkbb3_default
RTMPDump 2.4 git-6230845 2011-9-25
(c) 2010 Andrej Stepanchuk, Howard Chu, The Flvstreamer Team; license: GPL
Connecting ...
ERROR: RTMP_Connect0, failed to connect socket. 10060 (Unknown error)
INFO: Command exit code 3 (raw code = 768)
WARNING: Failed to stream file C:\Users\Tin\Desktop\iPlayer Recordings\Newsnight_-_02_04_2012_b01fkbb3_default.partial.mp4.flv via RTMP
INFO: skipping flashhigh1 mode
INFO: Trying flashhigh2 mode to record tv: Newsnight - 02/04/2012
INFO: File name prefix = Newsnight_-_02_04_2012_b01fkbb3_default
RTMPDump 2.4 git-6230845 2011-9-25
(c) 2010 Andrej Stepanchuk, Howard Chu, The Flvstreamer Team; license: GPL
Connecting ...
ERROR: RTMP_Connect0, failed to connect socket. 10060 (Unknown error)
INFO: Command exit code 3 (raw code = 768)
WARNING: Failed to stream file C:\Users\Tin\Desktop\iPlayer Recordings\Newsnight_-_02_04_2012_b01fkbb3_default.partial.mp4.flv via RTMP
INFO: skipping flashhigh2 mode
INFO: Trying flashstd1 mode to record tv: Newsnight - 02/04/2012
INFO: File name prefix = Newsnight_-_02_04_2012_b01fkbb3_default
RTMPDump 2.4 git-6230845 2011-9-25
(c) 2010 Andrej Stepanchuk, Howard Chu, The Flvstreamer Team; license: GPL
Connecting ...
ERROR: RTMP_Connect0, failed to connect socket. 10060 (Unknown error)
INFO: Command exit code 3 (raw code = 768)
WARNING: Failed to stream file C:\Users\Tin\Desktop\iPlayer Recordings\Newsnight_-_02_04_2012_b01fkbb3_default.partial.mp4.flv via RTMP
INFO: skipping flashstd1 mode
INFO: Trying flashstd2 mode to record tv: Newsnight - 02/04/2012
INFO: File name prefix = Newsnight_-_02_04_2012_b01fkbb3_default
RTMPDump 2.4 git-6230845 2011-9-25
(c) 2010 Andrej Stepanchuk, Howard Chu, The Flvstreamer Team; license: GPL
Connecting ...
ERROR: RTMP_Connect0, failed to connect socket. 10060 (Unknown error)
INFO: Command exit code 3 (raw code = 768)
WARNING: Failed to stream file C:\Users\Tin\Desktop\iPlayer Recordings\Newsnight_-_02_04_2012_b01fkbb3_default.partial.mp4.flv via RTMP
INFO: skipping flashstd2 mode
ERROR: Failed to record 'Newsnight - 02/04/2012 (b01fkbb3)'
C:\Program Files (x86)\get_iplayer>
You can't assume from a successful download of the subtitle file that the video server will play nice with your VPN. I'm fairly certain that the .srt is delivered by a BBC server, while the video stream is served by one of the big CDNs.
Make another attempt with
C:\Program Files (x86)\get_iplayer>get_iplayer --pid b01fkbb3 --verbose --long
and take a look at the results. If it looks like the request for the subtitle file is made to a different domain than the request for the video stream, your most likely issue is that Limelight or Akamai is rejecting requests made through UKBestVPN.
Paid VPN's are typically under no obligation to provide you with a new IP if the CDNs get wise to circumvention of geographical restrictions--but it never hurts to ask. Sorry that's probably not what you wanted to hear; there might be more benign reasons the for the video server to reject your request...maybe if your VPN was really busy, it could have been slow to respond to RTMP handshake...etc.
P.S. Assuming you rectify your issues, here's a couple of tips:
Go into C:\Program Files (x86)\get_iplayer and make a copy of get_iplayer.cmd; paste it back into the program folder and rename it bbc.cmd.
Now all you have to type is bbc -g horizon.
Create a user variable called PATH and put C:\Program Files (x86)\get_iplayer in it.
Now you can just hit your Windows key and type bbc -g horizon directly into the Search programs and files box.
You don't have to deal with text wrap in a puny command-line window.
Right-click on the get_iplayer icon and select properties; click on the Layout tab and you can resize it to something more usable.
Use Expat Shield or any other program that provides a UK IP address.
Get_iPlayer will do the download job.
No RTMP error, then.
UKBestVPN may not be as stable to bypass the IP restriction as Expat Shield is.
Related
Trying the give the details of snowfalke in dbt profiles.yml file . but as soon as when ran the command i,e
$atom /home/myname/.dbt/profiles.yml gives below error:
/usr/bin/atom: line 190: 1705 Trace/breakpoint trap (core dumped) nohup "$ATOM_PATH" --executed-from="$(pwd)" --pid=$$ "$#" > "$ATOM_HOME/nohup.out" 2>&1
Failed to move to new namespace: PID namespaces supported, Network namespace supported, but failed: errno = Permission denied
Following things i tried: Ran below commands but still no luck:
1)
$google-chrome --no-gpu --no-sandbox --disable-setuid-sandbox --headless --dump-dom http://www.chromestatus.com
Error:
[0627/161930.251811:ERROR:udev_watcher.cc(61)] Failed to enable receiving udev events.
[0627/161932.565713:ERROR:platform_shared_memory_region_posix.cc(46)] Descriptor access mode (0) differs from expected (2)
[0627/161932.566251:WARNING:crash_handler_host_linux.cc(366)] Could not translate tid - assuming crashing thread is thread group leader; syscall_supported=0
[0627/161932.769040:WARNING:crash_handler_host_linux.cc(366)] Could not translate tid - assuming crashing thread is thread group leader; syscall_supported=0
--2020-06-27 16:19:32-- https://clients2.google.com/cr/report
Resolving clients2.google.com (clients2.google.com)... 2404:6800:4009:805::200e, 172.217.174.238
Connecting to clients2.google.com (clients2.google.com)|2404:6800:4009:805::200e|:443... [0627/161933.036124:ERROR:headless_shell.cc(399)] Abnormal renderer termination.
connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/plain]
Saving to: ‘/dev/fd/4’
0K
Crash dump id: e870824b56e91b9f
$ google-chrome
Error:
Failed to move to new namespace: PID namespaces supported, Network namespace supported, but failed: errno = Permission denied
Trace/breakpoint trap (core dumped)
[1772:1772:0100/000000.825375:ERROR:zygote_linux.cc(653)] write: Broken pipe (32)
[0627/162152.831614:ERROR:nacl_helper_linux.cc(308)] NaCl helper process running without a sandbox!
Most likely you need to configure your SUID sandbox correctly
Could any one advise on the above issue.
This could be an atom error. Could be packages or something that they installed. I could be wrong, but I don’t see anything in that error message that indicates it’s a profiles.yml thing. I wonder if they can open other files in atom just fine?
Alternatively, use a text editor that isn’t based on chrome
Thanks #jake and #Christine from FishTown Analytics.
Here are a few helpful links.
Atom issue;
Blogpost!
i installed gem5 simulator on ubuntu 14.04. then i used the youtube guide (https://www.youtube.com/watch?v=gd_DtxQD5kc) to run gem5 in full system mode in ARM architecture. first i downloaded arm-system-2011-08.tar.bz2 as mentioned in the video then i run below command:
build/ARM/gem5.opt configs/example/fs.py --disk-image=/home/morteza/full_system_images/disks/arm-ubuntu-natty-headless.img --kernel=/home/morteza/full_system_images/binaries/vmlinux.arm.smp.fb.2.6.38.8
but i encountered this output. can abybody please help me?
p.s: i added --kernel option and rename bootloader in /fulls_system_image/binaries from boot.arm to boot_emm.arm because of some errors about not finding bootloader and kernel. this is my final output which i brought hereunder. i' ll appreciate if anybody tell what is the problem.
OUTPUT:
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
gem5 compiled Jan 3 2020 05:49:20
gem5 started Jan 3 2020 17:16:17
gem5 executing on morteza-pc, pid 2499
command line: build/ARM/gem5.opt configs/example/fs.py --disk-image=/home/morteza/full_system_images/disks/arm-ubuntu-natty-headless.img --kernel=/home/morteza/full_system_images/binaries/vmlinux.arm.smp.fb.2.6.38.8
warn: Can only correctly generate a dtb for VExpress_GEM5_V1 platforms, unless custom hardware models have been equipped with generation functionality.
Global frequency set at 1000000000000 ticks per second
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (512 Mbytes)
info: kernel located at: /home/morteza/full_system_images/binaries/vmlinux.arm.smp.fb.2.6.38.8
warn: Bootloader entry point 0x80000000 overriding reset address 0
system.vncserver: Listening for connections on port 5900
system.terminal: Listening for connections on port 3456
0: system.remote_gdb: listening for remote gdb on port 7000
info: Using bootloader at address 0x80000000
info: Using kernel entry physical address at 0x80008000
warn: DTB file specified, but no device tree support in kernel
**** REAL SIMULATION ****
warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
info: Entering event queue # 0. Starting simulation...
warn: Device system.membus.badaddr_responder accessed by read to address 0x10009018 size=4
gem5.opt: build/ARM/cpu/simple/atomic.cc:418: virtual Fault AtomicSimpleCPU::readMem(Addr, uint8_t*, unsigned int, Request::Flags, const std::vector<bool>&): Assertion `!pkt.isError()' failed.
Program aborted at tick 30500
--- BEGIN LIBC BACKTRACE ---
build/ARM/gem5.opt(_Z15print_backtracev+0x15)[0x1d505e5]
build/ARM/gem5.opt(_Z12abortHandleri+0x36)[0x1d5a796]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x10330)[0x7f41e3962330]
/lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37)[0x7f41e1eacc37]
/lib/x86_64-linux-gnu/libc.so.6(abort+0x148)[0x7f41e1eb0028]
/lib/x86_64-linux-gnu/libc.so.6(+0x2fbf6)[0x7f41e1ea5bf6]
/lib/x86_64-linux-gnu/libc.so.6(+0x2fca2)[0x7f41e1ea5ca2]
build/ARM/gem5.opt(_ZN15AtomicSimpleCPU7readMemEmPhj5FlagsImERKSt6vectorIbSaIbEE+0x538)[0x1e4eca8]
build/ARM/gem5.opt(_ZN17SimpleExecContext7readMemEmPhj5FlagsImERKSt6vectorIbSaIbEE+0x21)[0x1e5c5b1]
build/ARM/gem5.opt(_Z13readMemAtomicI11ExecContextjESt10shared_ptrI9FaultBaseEPT_PN5Trace10InstRecordEmRT0_5FlagsImE+0x64)[0x1972e14]
build/ARM/gem5.opt(_ZNK10ArmISAInst27LOAD_IMM_AY_PN_SN_UN_WN_SZ47executeEP11ExecContextPN5Trace10InstRecordE+0x12d)[0x14f95cd]
build/ARM/gem5.opt(_ZN15AtomicSimpleCPU4tickEv+0x428)[0x1e4da58]
build/ARM/gem5.opt(_ZN10EventQueue10serviceOneEv+0xa1)[0x1d55f51]
build/ARM/gem5.opt(_Z9doSimLoopP10EventQueue+0x38)[0x1d65fc8]
build/ARM/gem5.opt(_Z8simulatem+0xaae)[0x1d66dfe]
build/ARM/gem5.opt[0x1dbbd3d]
build/ARM/gem5.opt[0xe08e85]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x45f7)[0x7f41e3579be7]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[0x7f41e357b63d]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x48d8)[0x7f41e3579ec8]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[0x7f41e357b63d]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x48d8)[0x7f41e3579ec8]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[0x7f41e357b63d]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x48d8)[0x7f41e3579ec8]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[0x7f41e357b63d]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCode+0x32)[0x7f41e357b772]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x563e)[0x7f41e357ac2e]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[0x7f41e357b63d]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x48d8)[0x7f41e3579ec8]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[0x7f41e357b63d]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCode+0x32)[0x7f41e357b772]
/usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyRun_StringFlags+0x79)[0x7f41e35755a9]
--- END LIBC BACKTRACE ---
Aborted (core dumped)
rxRemoteHadoopMRCall()
====== xxxx.cloudapp.azure.com (Master HPA Process) has started run at Sat Mar 18 08:15:43 2017 ======
17/03/18 03:16:36 WARN util.NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where application
Warning: libjvm.so not found in /log/cloudera/parcels/MRS-9.0.1/hadoop, searching system-wide
Internal Error: Cannot reset hdfs internal params while connected to an hdfs file system.
Error in try({ :
Internal Error: Cannot reset hdfs internal params while connected to an hdfs file system.
I wonder if this is a problem with locating JRE. You can try setting JAVA_HOME for your user ($HOME/.bashrc) or for all users (etc/environment) on the node you're connecting to. It should point to a place that correctly resolves this path: $JAVA_HOME/jre/lib/amd64/server/libjvm.so
I'm trying to crawl a website's data using Import.io desktop app, I'm running this software on a windows server 2008 r2 64bit,32 GB Ram & intel 4770 i7 CPU, But when it's crawling , Suddenly an error appears which asks me to restart the program, The error description contains :
Problem signature:
Problem Event Name: APPCRASH
Application Name: import.io.exe
Application Version: 0.0.0.0
Application Timestamp: 553e7d2c
Fault Module Name: mozalloc.dll
Fault Module Version: 24.0.0.5001
Fault Module Timestamp: 522fa8df
Exception Code: 80000003
Exception Offset: 0000119c
OS Version: 6.1.7601.2.1.0.274.10
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I've tried to download a new mozalloc.dll and replace the old one with the newer version. Which in this case , Import.io app uses xulrunner version 24, First I've replaced mozalloc.dll version 42 (newest version) with the default import.io's mozalloc.dll file at :
C:\Users\Administrator\AppData\Roaming\import.io\xulrunner-versions\24
But after that , the program interface wasn't showing up. When I opened import.io , it does open in the task manager but windows didn't show up the program's interface.
I've also downloaded the newest xulrunner version and replaced all the files in that folder , Same thing happened again.
I have install latest version of IBM Worklight on Marketplace of eclipse juno. I have create a new project and then run my project Run As > Run on Worklight Development Server. then i have face an error on the server. Please Help me.
Thanks
Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=256m; support was removed in 8.0
objc[42627]: Class JavaLaunchHelper is implemented in both /Library/Java/JavaVirtualMachines/jdk1.8.0_20.jdk/Contents/Home/jre/bin/java and /Library/Java/JavaVirtualMachines/jdk1.8.0_20.jdk/Contents/Home/jre/lib/libinstrument.dylib. One of the two will be used. Which one is undefined.
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [debugInit.c:750]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
/Users/apple/Downloads/eclipse 2/plugins/com.worklight.studio.plugin_6.2.0.00-20140904-1709/liberty/wlp/bin/server: line 710: 42627 Abort trap: 6 "${JAVA_CMD}" "$#"
Your Log says Address Already in use. Restart your eclipse. Make sure process is killed.
Either your eclipse did not exit gracefully or some other application is using the port.
If some application is using the port go to server view of eclipse, expand "worklight development server" and change port in "server.xml" file. Hope that helps
According to your error message it is clearly saying that address already in use , this means the port number id using java.exe in background process.so this time if you stop server also this will not release.For this please do the following.
1.Download TCPView from http://technet.microsoft.com/en-us/sysinternals/bb897437.aspx for windows.
2.Install TcpView , after that you will find the port number say 10080.Right click on port number and end process.Now Clean the project and run the server.
Hope this helps.