I'm on OSX and want to switch back to my original zsh config from oh-my-zsh, however when I run the uninstall script it gives me an error:
$ sudo uninstall oh-my-zsh
>> Preparing Uninstall...
Uninstall Began...
Uninstall Failed...
Reason: ErrorMissingBundle
Can anyone please tell me what this means? Thanks!
Have you tried just running the commands from uninstall script by hand? It's really straight forward: https://github.com/robbyrussell/oh-my-zsh/blob/master/tools/uninstall.sh. For the most part it just removes OMZ and attempts to restore a back up file:
rm -rf ~/.oh-my-zsh
rm ~/.zshrc
cp ~/.zshrc.pre-oh-my-zsh ~/.zshrc
source ~/.zshrc
In new version, just run uninstall_oh_my_zsh from the command-line.
See https://github.com/robbyrussell/oh-my-zsh#uninstalling-oh-my-zsh
Try
/usr/bin/chsh -s /bin/bash
rm ~/.zshrc
brew uninstall zsh --force
just run uninstall_oh_my_zsh
from here
https://github.com/robbyrussell/oh-my-zsh#uninstalling-oh-my-zsh
I was unable to uninstall directly since I was getting zsh:command rm not found
so I did the following:
/usr/bin/chsh -s /bin/bash
on terminal preference, I switched back to the default Login shell
and ran the below command
rm ~/.zshrc
brew uninstall zsh --force
simply use the following command:
/usr/bin/chsh -s /bin/bash
Related
I have to install redis, but it is not working to install redis anymore using brew. Getting the following error when trying to install this way:
Warning: No available formula with the name "redis".
==> Searching for similarly named formulae and casks...
==> Casks
another-redis-desktop-manager ✔ redis-pro
jpadilla-redis redisinsight
medis
To install another-redis-desktop-manager ✔, run:
brew install --cask another-redis-desktop-manager ✔
Tried the command brew install --cask another-redis-desktop-manager.
This also didn't work.
Actually found the answer. Basically the reason for the failure in installation was because the core homebrew packages were not correctly configured.
Identified the issue with brew doctor
The solution was
rm -rf "/opt/homebrew/Library/Taps/homebrew/homebrew-core"
brew tap homebrew/core
ARM Homebrew must be installed in the /opt/homebrew directory. Earlier, you need to manually create directories and run commands. However, you do not need to manually run commands to use the latest scripts.
Direct execution:
/bin/bash -c "$(curl -fsSL https://gitee.com/ineo6/homebrew-install/raw/master/install.sh)"
PS: terminal type Run the echo $SHELL command. The command output is as follows:
/bin/bash => bash => .bash_profile
/bin/zsh => zsh => .zprofile
If you encounter invalid environment variables, you are advised to check the terminal type before setting the correct environment variables.
Starting with macOS Catalina(10.15.x), Macs use zsh as the default Shell, using.zprofile, so the corresponding command:
echo 'eval "$(/opt/homebrew/bin/brew shellenv)"' >> ~/.zprofile
eval "$(/opt/homebrew/bin/brew shellenv)"
If you have macOS Mojave or later and have not configured zsh yourself, use.bash_profile:
echo 'eval "$(/opt/homebrew/bin/brew shellenv)"' >> ~/.bash_profile
eval "$(/opt/homebrew/bin/brew shellenv)"
Hope this can help you
I installed homebrew on ubuntu 19.04 and it's accidentally stop, so the install not complete. but the folder already created.
If I install it again
sudo apt install linuxbrew-wrapper
I get a message:
linuxbrew-wrapper is already the newest version
but if I write command :
brew upgrade
I get this message:
Command 'brew' not found, but can be installed with:
sudo apt install linuxbrew-wrapper".
Can anyone help me fix this?
Maybe this can help more people...
I just executed the following command line
$/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/uninstall.sh)"
This is the same url as in here Homebrew homepage but instead of install.sh, I used uninstall.sh.
After performing what https://stackoverflow.com/a/57208010/2787992 said, you might need to run
sudo rm -rf /home/linuxbrew
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/uninstall.sh)"
sudo rm -rf /home/linuxbrew
For details see: https://www.how2shout.com/linux/how-to-install-brew-ubuntu-20-04-lts-linux/
Try uninstalling the packages.
To remove just linuxbrew-wrapper package
sudo apt-get remove linuxbrew-wrapper
If you want to delete configuration and data files
sudo apt-get purge linuxbrew-wrapper
Source your bashrc first
source ~/.bashrc
I am trying to install do brew install python3 on my mac but i keep getting the following errors:
this is the first error:
No such file or directory # dir_chdir - /usr/local/Cellar
then a bit later i get this error:
An exception occurred within a child process:
Errno::EPERM: Operation not permitted # dir_s_mkdir - /usr/local/Cellar
I have ran brew update then brew doctor the brew cleanup but keep getting the error.
I have also checked to see if xcode is up-to-date but according to the appstore all my apps are up-to-date.
How do i fix this problem?
PS i also get these errors when trying to install other packages from brew.
Try uninstalling Homebrew and then re-installing solved issue for me.
Uninstall Homebrew:
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/uninstall.sh)"
Re-install Homebrew:
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
Performed in MacOS Mojave (10.14.4)
Happened to me when uninstalling Laravel Valet.
Fixed by running: brew doctor, then brew cleanup after.
After that - brew install php worked just fine.
I experienced a similar error with a different package - brew install llvm.
Uninstalling homebrew and reinstalling led to more catastrophic issues that lasted for hours before I had to reach for my backup drive and restore everything.
What eventually worked was just creating the missing directory and everything worked.
So in this case:
sudo mkdir /usr/local/Cellar/dir_chdir
should solve the issue without too much hustle.
It worked for me after running below commands
sudo mkdir /usr/local/Cellar/dir_chdir
sudo chown -R $(whoami) /usr/local/Cellar
chmod u+w /usr/local/Cellar
I had this problem as well - it was partly coming from brew being installed under a different user on my mac I had set up for a past project. I had to follow the uninstall instructions (found in the homebrew github) with a little bit of sudo help and it cleared up the issue. Was able to install and properly run packages after.
For ubuntu just go to the location which u are getting error. Then open the contained file using a suitable application. In my case, it is getting as follows in the image view.
In this case, the error is showing in 36's lines.
yes. There is no location such as. I have to find out the location which contains brew. It was in /home/linuxbrew/.linuxbrew//bin/brew shellenv
So update your .profile file as in the brew file contains location as follows image shown.
uninstall brew :
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/uninstall.sh)"
and again reinstall brew:
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
executed this same as it is on your terminal, it will really work.
I'm attempting to install HomeBrew on OS X 10.12.6. When I use the autoinstall script from Homebrew's website:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Everything runs smoothly until it begins actually downloading and installing Homebrew, at which point it returns the following error:
==> Downloading and installing Homebrew...
/usr/local/homebrew/.git: Permission denied
Failed during: git init -q
Any tips of how to resolve this? Any assistance would be greatly appreciated!
You should make your /usr/local/bin and /usr/local/opt writeable, i.e.:
chmod +w /usr/local/bin
chmod +w /usr/local/opt
Depending on your user's permissions you may have to use sudo to achieve it.
Maybe git is missing:
apt install git
I have installed Ubuntu Bash on Windows. I already have nodejs and npm on my windows machine at C:\Program Files\nodejs. In the bash shell in Windows, I am running a script which uses npm install command. The script is giving following error
: not foundram Files/nodejs/npm: 3: /mnt/c/Program Files/nodejs/npm:
: not foundram Files/nodejs/npm: 5: /mnt/c/Program Files/nodejs/npm:
/mnt/c/Program Files/nodejs/npm: 6: /mnt/c/Program Files/nodejs/npm: Syntax error: word unexpected (expecting "in")
Note: Before following the steps below, first try to restart your shell.
You can install Node.js and NPM with your Windows PowerShell as well, so if you've done that it won't work properly for your Subsystem. That means you have to install it twice (Powershell and Subsystem) or decide on one thing.
If the preceding text, has not helped you, this is how to solve the problem:
Remove your current installations
sudo apt-get --purge remove node
("sudo apt autoremove node" if console is asking for it)
sudo apt-get --purge remove nodejs
Install node the right way.
This is for version 14 (view current LTS version):
curl -fsSL https://deb.nodesource.com/setup_14.x | sudo -E bash -
sudo apt-get install -y nodejs
Then install build tools so you can install add-ons for npm later
sudo apt-get install -y build-essential
Now you can type in
npm -v
node -v
Same thing: nodejs -v
to check whether Node.js and NPM are installed correctly. If it shows nothing, restart the shell.
If it still shows the same error, restart the WSL/ PC or try with sudo npm -v
Here are two links that may also help you.
https://nodejs.org/en/download/package-manager/#debian-and-ubuntu-based-linux-distributions
https://github.com/nodesource/distributions/blob/master/README.md#debinstall
Also, take a look at the Node Version Manager (NVM). With it, you can easily switch back and forth between versions.
The solution provided by phucanhapril on May 24, 2017 in this thread worked for me.
To summarise, edit ~/.profile and change your PATH to this:
PATH="$HOME/bin:$HOME/.local/bin:/usr/bin:$PATH"
(By default it does not include /usr/bin)
Then run:
source ~/.profile
I am not quite sure why npm doesn't work properly in the first place, or why /usr/bin isn't in PATH by default, but the solution worked for me.
I had the same problem to solve I installed "NVM" in my Subsystem
Follow these steps and see if it will solve for you:
sudo apt-get update
sudo apt-get install build-essential libssl-dev
curl -sL https://raw.githubusercontent.com/creationix/nvm/v0.31.0/install.sh -o install_nvm.sh
bash install_nvm.sh
source ~/.profile
nvm install 11.13.0
You can try sudo npm install it was a solution in my particular case.
Linux command for install nodejs and npm
sudo apt-get install nodejs
sudo apt-get install npm
Set path in linux
export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
reference
https://github.com/microsoft/WSL/issues/3882
curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash -
sudo apt-get install -y nodejs
this is enough, if you still face the problem
node installation needs restart, close you ubuntu window and start again it will solve your problem :)
I had the same problem. This is what I did.
Step 1. Type node -v and npm -v commands in Windows PowerShell and check if node and npm are properly installed
Step 2. Add this to the ~/.zshrc or ~/.bashrc file
export NVM_DIR="$([ -z "${XDG_CONFIG_HOME-}" ] && printf %s "${HOME}/.nvm" || printf %s "${XDG_CONFIG_HOME}/nvm")"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"
Step 3. Type source ~/.zshrc and/or source ~/.bashrc
Step 4. Type node -v and npm -v commands in bash or zsh shells and the correct versions should now appear
On Visual Studio -> Tools -> Options -> Projects and Solutions -> Web Package Management -> make sure $(PATH) is above all the rest.
As long it is not located at the top of the list VS will try to use VS tools instead of npm.
You should also refer windows to the current npm version by following this screenshot, after try npm --version.
Changing npm path:
I had this issue in both Debian and Ubuntu (though in Ubuntu the nvm command did work) when I was running Windows 10 version 1703. Then when I upgraded to version 1903 the problem disappeared.
I had the same error and it may seem silly, but I fixed it by simply typing exit in the console and opening it again.
I received this error when I modified my "~/.bashrc" file to shorten up the bash directory.
At first I had:
if [ "$color_prompt" = yes ]; then
PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u\[\033[00m\]:\[\033[01;34m\]\W\[\033[00m\]\$ '
else
PS1='${debian_chroot:+($debian_chroot)}\u\h:\W\$'
fi
....But then could not run any node operation. I rolled it back and the error stopped happening.
After some troubleshooting, I was able to fix the error by adding ~ before the $ on PS1='${debian_chroot:+($debian_chroot)}\u\h:\W\~$
I just read through many threads trying to do this. There is complete documentation for setting up node, nvm, and npm in wsl, here: https://learn.microsoft.com/en-us/windows/nodejs/setup-on-wsl2
If you already installed node and npm using the following commands,
sudo apt-get install nodejs
sudo apt-get install npm
NPM will not work. You must first uninstall them using:
sudo apt-get remove nodejs
sudo apt-get remove npm
Follow the guide to completely uninstalling here: How can I completely uninstall nodejs, npm and node in Ubuntu
Then reinstall from the windows guide referenced above.
The windows guide has many other useful resources.
The Tldr to install(from Microsoft Docs):
sudo apt-get install curl
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.37.2/install.sh | bash
nvm install --lts
I had identical output to that in the question. It occurs because Ubuntu on WSL adds Windows paths to the bash shell, but of course the Windows executables do not work in bash.
I installed nvm, and from there installed node into bash. NVM works out all the paths so it works.