I am trying to add uipickerview in uiscrollview, but it is not being shown properly, just a black square.
Further, I have to add 1 more uipickerview, some labels and some buttons.
The code I am using is as under:
-(void)loadView {
[super loadView];
UIPickerView *pView = [[UIPickerView alloc] initWithFrame:CGRectMake(20, 20, 280, 165)];
self.view.backgroundColor = [UIColor colorWithPatternImage:[UIImage imageNamed:#"Background.png"]];
scroller = [[UIScrollView alloc] initWithFrame:CGRectMake(0, 0, self.view.frame.size.width, self.view.frame.size.height)];
scroller.pagingEnabled = YES;
NSInteger numberOfViews = 2;
for (int i = 0; i < numberOfViews; i++) {
CGFloat yOrigin = i * self.view.frame.size.height;
UIView *awesomeView = [[UIView alloc] initWithFrame:CGRectMake(yOrigin, 0, self.view.frame.size.width, self.view.frame.size.height)];
// awesomeView.backgroundColor = [UIColor colorWithRed:0.5/i green:0.5 blue:0.5 alpha:1];
[scroller addSubview:awesomeView];
[scroller addSubview:pView];
}
scroller.contentSize = CGSizeMake(self.view.frame.size.width , self.view.frame.size.height * numberOfViews);
[self.view addSubview:scroller];
}
what can be the issue?
Are you putting data in the picker view? I mean, if you just put the picker view without data on it you are not going to see anything on it.
You need to add the delegate and the datasource and put some data in your picker!
pView.delegate = self;
pView.datasource = self;
and then you have to implemente at least:
numberOfComponentsInPickerView:
numberOfRowsInComponent:
titleForRow:
make sure you are implementing uipickerviewdelegate methods. its normal that it will show just the black square because your pickerview cant find the data and thus does not display anything.
UIPickerView *pView = [[UIPickerView alloc] initWithFrame:CGRectMake(20, 20, 280, 165)];
Change height to 216 .. UIPickerView has fixed height of 216 ..only.. you can't change it..
Related
I want to add some UILabels on top of my UIImagePickerController's custom OverlayView but can't seem to get it working.
Here is my code.
-(IBAction)getPhoto:(id)sender{
picker = [[UIImagePickerController alloc] init];
picker.allowsEditing = NO;
picker.sourceType = UIImagePickerControllerSourceTypeCamera ;
picker.showsCameraControls = NO;
self.picker.navigationBarHidden = YES;
self.picker.toolbarHidden = YES;
OverlayView = [[OverlayView alloc] initWithFrame:CGRectMake(0, 0, self.view.frame.size.width,1024)];
UILabel *label = [[UILabel alloc]initWithFrame:CGRectMake(OverlayView.frame.size.height/2, OverlayView.frame.size.width/2, 30, 100)];
label.textColor = [UIColor whiteColor];
label.text = #"find Me";
[self.OverlayView addSubview:label];
[self.OverlayView bringSubviewToFront:label];
picker.cameraOverlayView = OverlayView;
CGSize screenSize = [[UIScreen mainScreen] bounds].size; // 320 x 568
float scale = screenSize.height / screenSize.width*3/4; // screen height divided by the pickerController height ... or: 568 / ( 320*4/3 )
CGAffineTransform translate=CGAffineTransformMakeTranslation(0,(screenSize.height - screenSize.width*4/3)*0.5);
CGAffineTransform fullScreen=CGAffineTransformMakeScale(scale, scale);
picker.cameraViewTransform =CGAffineTransformConcat(fullScreen, translate);
[self presentViewController: picker animated:YES completion:NULL];
}
the overview shows up and it is full screen but no label
any ideas
Your label is just offscreen, check its frame
You can place it for instance like that, at least it will be visible
self.overlayView = [[OverlayView alloc] initWithFrame:CGRectMake(0, 0, self.view.frame.size.width, self.view.frame.size.height)];
UILabel *label = [[UILabel alloc]initWithFrame:CGRectMake(self.overlayView.frame.size.width/2, self.overlayView.frame.size.height/2, 30, 100)];
I have two views in my program. One is statusView, it's alpha is set to 0.8f. And below it is tableView. How do I disable statusView such way, that clicking on it would not click tableView. Settings userInteractionEnabled = false; didn't help.
Here is how i add views.
[self.view addSubview:_builded.view]; // obj with my tableView
info = [[Info alloc] init];
[self.view addSubview:info.view]; // statusView
If you add a subview like the following, the tableView underneath would not catch the user interaction.
UITableView *testTableView = [[UITableView alloc] initWithFrame:CGRectMake(0, 0, 320, 460)];
testTableView.delegate = self;
testTableView.dataSource = self;
[self.view addSubview:testTableView];
UIView *statusView = [[UIView alloc] initWithFrame:CGRectMake(20, 20, 200, 200)];
statusView.backgroundColor = [UIColor redColor];
statusView.alpha = 0.8;
[self.view addSubview:statusView];
I have some images within icarousel. (about 20 images)
I wanna 5 images in a page.
There is no problem about image pixel or image location.
How to use uipagecontrol WITHOUT ScrollView?
ex) able to use some delegate methods.. and so on.
carousel.type = iCarouselTypeLinear;
carousel = [[iCarousel alloc] initWithFrame:CGRectMake(0, 504, 1024, 164)];
carousel.backgroundColor = [UIColor colorWithPatternImage:[UIImage imageNamed:#"10004.png"]];
carousel.delegate = self;
carousel.dataSource = self;
[self.view addSubview:carousel];
[carousel reloadData];
[carousel release];
UIView *bandImageView = [[UIView alloc] initWithFrame:CGRectMake(0, 668, 1024, 20)];
bandImageView.backgroundColor = [UIColor colorWithPatternImage:[UIImage imageNamed:#"10001.png"]];
[self.view addSubview:bandImageView]; // page dots in
UIPageControl *pageControl = [[UIPageControl alloc] init];
pageControl.frame = CGRectMake(434, 0, 150, 20);
pageControl.numberOfPages = 6;
pageControl.currentPage = 0;
[bandImageView addSubview:pageControl];
[pageControl release];
In the iCarousel carouselCurrentItemIndexUpdated: delegate method, set
pageControl.currentPage = carousel.currentItemIndex / 5
Then bind your pageControl action to a method like the one below:
- (IBAction)updatePage:(UIPageControl *)pageControl
{
[carousel scrollToItemAtIndex:pageControl.currentPage * 5 aimated:YES];
}
If you're not using a nib file, you can bind the action using
[pageControl addTarget:self action:#selector(updatePage:) forControlEvents:UIControlEventValueChanged];
It's a good idea to set pageControl.defersCurrentPageDisplay = YES; as well to avoid flicker.
I used the below codes
CGRect scrollserviceViewFrame1 = CGRectMake(60,610, 650, 150);
//CGRect scrollViewFrame =[[UIScreen mainScreen] applicationFrame];
//UIScrollView *scrollView = [[UIScrollView alloc] initWithFrame:scrollViewFrame];
UIScrollView *servicescrollView1 = [[UIScrollView alloc] initWithFrame:scrollserviceViewFrame1];
[self.view addSubview:servicescrollView1];
//scrollView.backgroundColor=[UIColor greenColor];
[servicescrollView1 setBackgroundColor:[UIColor redColor]];
[servicescrollView1 setCanCancelContentTouches:NO];
//scrollView.indicatorStyle = UIScrollViewIndicatorStyleBlack;
servicescrollView1.clipsToBounds = YES; // default is NO, we want to restrict drawing within our scrollview
servicescrollView1.scrollEnabled = YES;
servicescrollView1.autoresizesSubviews=YES;
[servicescrollView1 setContentSize: CGSizeMake(1050, 100)];
//scrollView.delegate = self;
servicescrollView1.pagingEnabled = YES;
servicescrollView1.showsHorizontalScrollIndicator = NO;
[servicescrollView1 scrollRectToVisible:CGRectMake(servicescrollView1.frame.size.width, 0, self.view.frame.size.width, self.view.frame.size.height) animated:YES];
NSLog(#" scroll view width :%i ",servicescrollView1.frame.size.width);
NSLog(#"scroll view height :%i ",self.view.frame.size.height);
NSLog(#"self view width :%i",self.view.frame.size.width);
CGRect CGRectZero = CGRectMake(60,710,200, 100);
UIView* myserviceView1 = [[UIView alloc] initWithFrame: CGRectZero];
myserviceView1.backgroundColor=[UIColor blackColor];
[servicescrollView1 addSubview:myserviceView1];
[myserviceView1 release];
[servicescrollView1 release];
The scroll view is created , butcannot add the UIVIew to scrollview...
Any suggestions for solving this query???
Thanks in advance
Near the bottom of your code where you create myserviceView1, you (attempt to) reset a constant (CGRectZero).
And then when you create your myserviceView1 UIView, you're giving it a frame size of {0, 0, 0, 0}.
Is there a way to put several UIViews In a UIScrollView in a tabbar page. If so, how would I do that? To make it simple, Imageine the homescreen icons on the springboard. Each page is a UIView. I want to basically put this on a tabbar page. Is this possible? How would I do it?
NOTE:
First try to accept the answers then only you will get lot of good answer from our seniors.....
first create the uiscrollview and then add that it to the tabbar... for creating the uiscrollview
UIScrollView *scroll = [[UIScrollView alloc] initWithFrame:CGRectMake(0, 0, self.view.frame.size.width,self.view.frame.size.height)];
scroll.pagingEnabled = YES;
NSInteger numberOfViews = 3;
for (int i = 0; i < numberOfViews; i++) {
CGFloat yOrigin = i * self.view.frame.size.width;
UIView *awesomeView = [[UIView alloc] initWithFrame:CGRectMake(yOrigin, 0, self.view.frame.size.width, self.view.frame.size.height)];
awesomeView.backgroundColor = [UIColor colorWithRed:0.5/i green:0.5 blue:0.5 alpha:1];
[scroll addSubview:awesomeView];
[awesomeView release];
}
scroll.contentSize = CGSizeMake(self.view.frame.size.width * numberOfViews, self.view.frame.size.height);
[self.view addSubview:scroll];