I have simple SQL Server view that I need to make amends to:
CREATE VIEW [dbo].[ApplicantStat]
AS SELECT ISNULL(CONVERT(VARCHAR(50), NEWID()), '') AS Pkid,
AVG(ApplicationTime) AS 'AvgApplicationTime',
AVG(ResponseTime) AS 'AvgResponseTime',
CAST(ROUND(100.0 * count(case when [IsAccepted] = 1 then 1 end) / count(case when [IsValid] = 1 then 1 end), 0) AS int) AS 'AcceptRate'
FROM [Application]
It works as planned, but I need to add a date range to it. It's not quite as simple as Where > this date and < that date, instead I need to create a range.
Suppose I have a 'CreatedOn' date in my Application table. I want to be able to include all rows from the last full day (yesterday) and work back 30 days (inclusive).
I'm using SQL Server 2014.
Use :
where CreatedOn between cast(getdate()-30 as date) and cast(getdate()-1 as date)
Please notice CAST is used, it is because to get the full day ignoring the time part.
Something like this:
where MyColumn between dateadd(dd, -1, convert(date, getdate())) and dateadd(dd, -30, convert(date, getdate()))
It's a bit beyond the scope of this question, but maybe useful to some. I like this way of creating a table with date range, to use in queries:
USE MyDataBase
DECLARE #StartDate DATE
DECLARE #EndDate DATE
SET #StartDate = '2014-01-01' -- << user input >> --
SET #EndDate = '2036-12-31' -- << user input >> --
IF OBJECT_ID ('TEMPDB..#Date') IS NOT NULL DROP TABLE #Date
IF OBJECT_ID ('TEMPDB..#Date') IS NULL CREATE TABLE #Date (DateOne DATE)
INSERT INTO #Date VALUES (#StartDate)
WHILE #StartDate < #EndDate
BEGIN
INSERT INTO #Date
SELECT DATEADD (DD, 1, #StartDate) AS Date
SET #StartDate = DATEADD (DD, 1, #StartDate)
END
SELECT * FROM #Date
You should be able to just stick a WHERE with a BETWEEN clause on the end.
CREATE VIEW [dbo].[ApplicantStat]
AS SELECT ISNULL(CONVERT(VARCHAR(50), NEWID()), '') AS Pkid,
AVG(ApplicationTime) AS 'AvgApplicationTime',
AVG(ResponseTime) AS 'AvgResponseTime',
CAST(ROUND(100.0 * count(case when [IsAccepted] = 1 then 1 end) / count(case when [IsValid] = 1 then 1 end), 0) AS int) AS 'AcceptRate'
FROM [Application]
WHERE CreatedOn BETWEEN GETDATE()-1 AND GETDATE()-30
name amount date
---------------------------------------
xxx 1000 2014-04-20 12:53:23.983
yyy 1500 2014-04-25 12:53:23.983
My output like this:
name amount date
--------------------------------------
xxx 1000 2014-04-20 12:53:23.983
My query:
alter proc K_VM_GetTaxdetails
as
begin
select name, amount, date
from K_VM_TaxDetails
where DATEADD(day, -15, GETDATE()) = date
end
I have tried like this but I am not getting required output.
If I have a date = 2014-04-20 12:53:23.983 in my table, I want to display all data before 15 days from that date.
How can I write in where condition?
This displays all rows in the last 15 days:
declare #now = select cast(floor(cast(getdate() as float)) as datetime); -- truncate time from datetime
select name, amount, date from K_VM_TaxDetails
where date >= dateadd(day, -15, #now);
This displays all rows for single day 15 days ago:
declare #now = select cast(floor(cast(getdate() as float)) as datetime); -- truncate time from datetime
select name,amount,date from K_VM_TaxDetails
where date >= dateadd(day, -15, #now) and
date < dateadd(day, -14, #now);
This will give you all data from the day 15 days ago
alter proc K_VM_GetTaxdetails
as
begin
declare #d datetime = dateadd(day, datediff(day, -15, getdate()), 0)
select name, amount, date
from K_VM_TaxDetails
where date >= #d -- retrieve from
and date < dateadd(day, 1, #d) -- retrieve to
end
Shows dates at least 15 days older than the current date:
select name,amount,date from K_VM_TaxDetails
where date <= DATEADD(day, -15, GETDATE())
I suggest to compare date with only date part and not time as including time in date comparison sometimes provided incorrect result.
Below query removes time part and compare only date.
select name, amount, date
from K_VM_TaxDetails
where (convert(date,[date]) >= DATEADD(day, -15, convert(date,GETDATE())) and convert(date,[date]) <= convert(date,GETDATE()))
alter proc K_VM_GetTaxdetails
as
begin
select name, amount, date
from K_VM_TaxDetails
where DATEADD(day, -15, SYSDATETIME()) = date
end
I am making a program that auto-runs using windows scheduler. What I'd like to do is set the program to run on the 1st and the 16th of every month. If the program run's on the 1st. I'd like to have the query run for last month... For example if today was the first of august I would want it to run 7/1/12 - 7/31/12. If I run the program on the 16th I want it to run the query for the current month to the 15th. For example if it were 8/16, I would want the program to run the query for 8/1/12 - 8/15/12. What is the best way to accomplish this? Do I go with 2 seperate programs with the query attaching it to the correct date range? One scheduled to run on the first of every month, and one on the 16th? How would I go about getting the date range and the year as it will depend on which month/year it is run... My query is:
SELECT Store_Number, Invoice_Number, Invoice_Date, Extended_Price, Warranty_Amount, Quantity_Sold, Invoice_Detail_Code
FROM Invoice_Detail_Tb
WHERE (Warranty_Amount > 0) AND (Invoice_Date BETWEEN CONVERT(DATETIME, '2012-08-01 00:00:00', 102) AND CONVERT(DATETIME, '2012-08-05 00:00:00', 102))
ORDER BY Store_Number, Invoice_Date
Try 8/1/2012 and 8/16/2012 as the date. It returns the values you want to see:
declare #date datetime = '8/16/2012', #start datetime, #end datetime
if datepart(dd, #date) = 1
begin
set #start = dateadd(mm, -1, #date)
set #end = dateadd(dd, -1, #date)
end
else
begin
set #start = dateadd(dd, -15, #date)
set #end = dateadd(dd, -1, #date)
end
select #start, #end
It would be fairly easy to adapt this so that it would dynamically calculate the correct start and end dates based on any input date -- so you could run it anytime during the month.
This should be simple, let me throw some examples for you.
I truly think this should be one scheduled task, not multiple ones.
It is easier at the end of the day to point and look at one scheduled task (one procedure)
then go digging up multiple procedures just to see what might have wen't wrong.
The task can be scheduled using the SQL Server Agent (under the jobs section). The job can point to one single stored procedure.
In the procedure you can do a simple if else if logic.
IF DAY(GetDate()) = 1
--code here
ELSE IF DAY(GETDATE()) = 16
--code here
DAY(date_expression) returns the day in a datetime column. Ironically there is a MONTH and YEAR function if you for some reason need those. The rest is simple, if you are on the first date of the month then perform the monthly query from months first date till next months first day - 1, this becomes:
SELECT DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,GETDATE())+1,0))
Otherwise if it hits on the 16th, you can run on the first day until half of the month.
If you have your query in a view, you might use this:
where
Invoice_Date between
(
case
when datepart(dd, getdate()) = 1 then dateadd(mm, -1, getdate())
else dateadd(dd, -15, getdate())
end
)
and
(
case
when datepart(dd, getdate()) = 1 then dateadd(dd, -1, getdate())
else dateadd(dd, -1, getdate())
end
)
UPDATE: Ignoring the time
(I know it looks ugly.)
where
Invoice_Date between
(
case
when datepart(dd, dateadd(dd, datediff(dd, 0, getdate()), 0)) = 1 then dateadd(mm, -1, dateadd(dd, datediff(dd, 0, getdate()), 0))
else dateadd(dd, -15, dateadd(dd, datediff(dd, 0, getdate()), 0))
end
)
and
(
case
when datepart(dd, dateadd(dd, datediff(dd, 0, getdate()), 0)) = 1 then dateadd(dd, -1, dateadd(dd, datediff(dd, 0, getdate()), 0))
else dateadd(dd, -1, dateadd(dd, datediff(dd, 0, getdate()), 0))
end
)
This is how I usually do something like that. Your stored procedure should look something like this:
declare
#today datetime ,
#dtFrom datetime ,
#dtThru datetime
------------------------------------------------------
-- get the current date, discarding the time component
------------------------------------------------------
set #today = convert(datetime,convert(varchar,current_timestamp,112),112) -- get todays date, discarding the time component
---------------------------------------------------------------------------------------------------------------------------------------------------
-- determine the start/end dates of the query period.
--
-- if the query date (#today) is in the 1st half of the month (1st - 15th), the query range is the entire preceding month
-- if the query date (#today) is in the last half of the month (16 - 31st), the query range is the 1st of the current month up to the current date
---------------------------------------------------------------------------------------------------------------------------------------------------
if ( datepart(day) < 16 )
begin
set #dtThru = dateadd(day, - datepart(day, #today ) , #today ) -- set the end date to the last day of the previous month
set #dtFrom = dateadd(day, 1 - datepart(day, #dtThru ) , #dtThru ) -- set the start date to the first day of the previous month
end
else
begin
set #dtfrom = dateadd(day, 1 - datepart(day, #today) , #today ) -- set the start date to the first day of the current month
set #dtThru = #today
end
----------------------------------------------------------------------------------------------------------------------
-- finally, adjust the start/end times to cover the entire gamut of date/time values for the month
--
-- We don't have to modify #dtFrom at all: we know its time component is 00:00:00.000 already. However, we want
-- #dtThru to have a time component of 23:59:59.997, due to SQL Server's broken way of counting time -- any time value
-- higher than that (e.g., '23:59.59.999') is 'rounded up' to start-of-day (00:00.00.000), the next day. Brilliant!
--
----------------------------------------------------------------------------------------------------------------------
set #dtThru = dateadd(ms, -3 , dateadd(day,1,#dtThru) )
--------------------------------
-- return the data to the caller
--------------------------------
SELECT Store_Number ,
Invoice_Number ,
Invoice_Date ,
Extended_Price ,
Warranty_Amount ,
Quantity_Sold ,
Invoice_Detail_Code
FROM Invoice_Detail_Tb id
WHERE Warranty_Amount > 0
AND Invoice_Date BETWEEN #dtFrom AND #dtThru
ORDER BY Store_Number ,
Invoice_Date
If you aren't using a stored procedure, you can accomplish the same thing with a parameterized query. Compute the two DateTime values needed. Put placeholders in your select statement ('#dtFrom' and '#dtThru'). When you execute the query, pass in your two DateTime values as SqlParameter objects with names matching the placeholders.
I want to get the records of last month based on my db table [member] field "date_created".
What's the sql to do this?
For clarification,
last month - 1/8/2009 to 31/8/2009
If today is 3/1/2010, I'll need to get the records of 1/12/2009 to 31/12/2009.
All the existing (working) answers have one of two problems:
They will ignore indices on the column being searched
The will (potentially) select data that is not intended, silently corrupting your results.
1. Ignored Indices:
For the most part, when a column being searched has a function called on it (including implicitly, like for CAST), the optimizer must ignore indices on the column and search through every record. Here's a quick example:
We're dealing with timestamps, and most RDBMSs tend to store this information as an increasing value of some sort, usually a long or BIGINTEGER count of milli-/nanoseconds. The current time thus looks/is stored like this:
1402401635000000 -- 2014-06-10 12:00:35.000000 GMT
You don't see the 'Year' value ('2014') in there, do you? In fact, there's a fair bit of complicated math to translate back and forth. So if you call any of the extraction/date part functions on the searched column, the server has to perform all that math just to figure out if you can include it in the results. On small tables this isn't an issue, but as the percentage of rows selected decreases this becomes a larger and larger drain. Then in this case, you're doing it a second time for asking about MONTH... well, you get the picture.
2. Unintended data:
Depending on the particular version of SQL Server, and column datatypes, using BETWEEN (or similar inclusive upper-bound ranges: <=) can result in the wrong data being selected. Essentially, you potentially end up including data from midnight of the "next" day, or excluding some portion of the "current" day's records.
What you should be doing:
So we need a way that's safe for our data, and will use indices (if viable). The correct way is then of the form:
WHERE date_created >= #startOfPreviousMonth AND date_created < #startOfCurrentMonth
Given that there's only one month, #startOfPreviousMonth can be easily substituted for/derived by:
DATEADD(month, -1, #startOfCurrentMonth)
If you need to derive the start-of-current-month in the server, you can do it via the following:
DATEADD(month, DATEDIFF(month, 0, CURRENT_TIMESTAMP), 0)
A quick word of explanation here. The initial DATEDIFF(...) will get the difference between the start of the current era (0001-01-01 - AD, CE, whatever), essentially returning a large integer. This is the count of months to the start of the current month. We then add this number to the start of the era, which is at the start of the given month.
So your full script could/should look similar to the following:
DECLARE #startOfCurrentMonth DATETIME
SET #startOfCurrentMonth = DATEADD(month, DATEDIFF(month, 0, CURRENT_TIMESTAMP), 0)
SELECT *
FROM Member
WHERE date_created >= DATEADD(month, -1, #startOfCurrentMonth)
AND date_created < #startOfCurrentMonth
All date operations are thus only performed once, on one value; the optimizer is free to use indices, and no incorrect data will be included.
SELECT *
FROM Member
WHERE DATEPART(m, date_created) = DATEPART(m, DATEADD(m, -1, getdate()))
AND DATEPART(yyyy, date_created) = DATEPART(yyyy, DATEADD(m, -1, getdate()))
You need to check the month and year.
Add the options which have been provided so far won't use your indexes at all.
Something like this will do the trick, and make use of an index on the table (if one exists).
DECLARE #StartDate DATETIME, #EndDate DATETIME
SET #StartDate = dateadd(mm, -1, getdate())
SET #StartDate = dateadd(dd, datepart(dd, getdate())*-1, #StartDate)
SET #EndDate = dateadd(mm, 1, #StartDate)
SELECT *
FROM Member
WHERE date_created BETWEEN #StartDate AND #EndDate
DECLARE #StartDate DATETIME, #EndDate DATETIME
SET #StartDate = DATEADD(mm, DATEDIFF(mm,0,getdate())-1, 0)
SET #EndDate = DATEADD(mm, 1, #StartDate)
SELECT *
FROM Member
WHERE date_created BETWEEN #StartDate AND #EndDate
An upgrade to mrdenny's solution, this way you get exactly last month from YYYY-MM-01
Last month consider as till last day of the month.
31/01/2016 here last day of the month would be 31 Jan. which is not similar to last 30 days.
SELECT CONVERT(DATE, DATEADD(DAY,-DAY(GETDATE()),GETDATE()))
One way to do it is using the DATEPART function:
select field1, field2, fieldN from TABLE where DATEPART(month, date_created) = 4
and DATEPART(year, date_created) = 2009
will return all dates in april. For last month (ie, previous to current month) you can use GETDATE and DATEADD as well:
select field1, field2, fieldN from TABLE where DATEPART(month, date_created)
= (DATEPART(month, GETDATE()) - 1) and
DATEPART(year, date_created) = DATEPART(year, DATEADD(m, -1, GETDATE()))
declare #PrevMonth as nvarchar(256)
SELECT #PrevMonth = DateName( month,DATEADD(mm, DATEDIFF(mm, 0, getdate()) - 1, 0)) +
'-' + substring(DateName( Year, getDate() ) ,3,4)
SQL query to get record of the present month only
SELECT * FROM CUSTOMER
WHERE MONTH(DATE) = MONTH(CURRENT_TIMESTAMP) AND YEAR(DATE) = YEAR(CURRENT_TIMESTAMP);
SELECT * FROM Member WHERE month(date_created) = month(NOW() - INTERVAL 1 MONTH);
select * from [member] where DatePart("m", date_created) = DatePart("m", DateAdd("m", -1, getdate())) AND DatePart("yyyy", date_created) = DatePart("yyyy", DateAdd("m", -1, getdate()))
DECLARE #StartDate DATETIME, #EndDate DATETIME
SET #StartDate = DATEADD(mm, DATEDIFF(mm, 0, getdate()) - 1, 0)
SET #EndDate = dateadd(dd, -1, DATEADD(mm, 1, #StartDate))
SELECT * FROM Member WHERE date_created BETWEEN #StartDate AND #EndDate
and another upgrade to mrdenny's solution.
It gives the exact last day of the previous month as well.
WHERE
date_created >= DATEADD(MONTH, DATEDIFF(MONTH, 31, CURRENT_TIMESTAMP), 0)
AND date_created < DATEADD(MONTH, DATEDIFF(MONTH, 0, CURRENT_TIMESTAMP), 0)
I'm from Oracle env and I would do it like this in Oracle:
select * from table
where trunc(somedatefield, 'MONTH') =
trunc(sysdate -INTERVAL '0-1' YEAR TO MONTH, 'MONTH')
Idea: I'm running a scheduled report of previous month (from day 1 to the last day of the month, not windowed). This could be index unfriendly, but Oracle has fast date handling anyways.
Is there a similar simple and short way in MS SQL? The answer comparing year and month separately seems silly to Oracle folks.
You can get the last month records with this query
SELECT * FROM dbo.member d
WHERE CONVERT(DATE, date_created,101)>=CONVERT(DATE,DATEADD(m, datediff(m, 0, current_timestamp)-1, 0))
and CONVERT(DATE, date_created,101) < CONVERT(DATE, DATEADD(m, datediff(m, 0, current_timestamp)-1, 0),101)
I don't think the accepted solution is very index friendly
I use the following lines instead
select * from dbtable where the_date >= convert(varchar(10),DATEADD(m, -1, dateadd(d, - datepart(dd, GETDATE())+1, GETDATE())),120) and the_date <= dateadd(ms, -3, convert(varchar(10),DATEADD(m, 0, dateadd(d, - datepart(dd, GETDATE())+1, GETDATE())),120));
Or simply (this is the best).
select * from dbtable where the_date >= convert(varchar(10),DATEADD(m, -1, dateadd(d, - datepart(dd, GETDATE())+1, GETDATE())),120) and the_date < SELECT convert(varchar(10),DATEADD(m, -1, dateadd(d, - datepart(dd, GETDATE())+1, GETDATE())),120);
Some help
-- Get the first of last month
SELECT convert(varchar(10),DATEADD(m, -1, dateadd(d, - datepart(dd, GETDATE())+1, GETDATE())),120);
-- Get the first of current month
SELECT convert(varchar(10),DATEADD(m, -1, dateadd(d, - datepart(dd, GETDATE())+1, GETDATE())),120);
--Get the last of last month except the last 3milli seconds. (3miliseconds being used as SQL express otherwise round it up to the full second (SERIUSLY MS)
SELECT dateadd(ms, -3, convert(varchar(10),DATEADD(m, 0, dateadd(d, - datepart(dd, GETDATE())+1, GETDATE())),120));
Here is what I did so I could put it in a view:
ALTER view [dbo].[MyView] as
with justdate as (
select getdate() as rightnow
)
, inputs as (
select dateadd(day, 1, EOMONTH(jd.rightnow, -2)) as FirstOfLastMonth
,dateadd(day, 1, EOMONTH(jd.rightnow, -1)) as FirstOfThisMonth
from justdate jd
)
SELECT TOP 10000
[SomeColumn]
,[CreatedTime]
from inputs i
join [dbo].[SomeTable]
on createdtime >= i.FirstOfLastMonth
and createdtime < i.FirstOfThisMonth
order by createdtime
;
Note that I intentionally ran getdate() once.
In Sql server for last one month:
select * from tablename
where order_date > DateAdd(WEEK, -1, GETDATE()+1) and order_date<=GETDATE()
DECLARE #curDate INT = datepart( Month,GETDATE())
IF (#curDate = 1)
BEGIN
select * from Featured_Deal
where datepart( Month,Created_Date)=12 AND datepart(Year,Created_Date) = (datepart(Year,GETDATE())-1)
END
ELSE
BEGIN
select * from Featured_Deal
where datepart( Month,Created_Date)=(datepart( Month,GETDATE())-1) AND datepart(Year,Created_Date) = datepart(Year,GETDATE())
END
DECLARE #StartDate DATETIME, #EndDate DATETIME
SET #StartDate = dateadd(mm, -1, getdate())
SET #StartDate = dateadd(dd, datepart(dd, getdate())*-1, #StartDate)
SET #EndDate = dateadd(mm, 1, #StartDate)
set #StartDate = DATEADD(dd, 1 , #StartDate)
The way I fixed similar issue was by adding Month to my SELECT portion
Month DATEADD(day,Created_Date,'1971/12/31') As Month
and than I added WHERE statement
Month DATEADD(day,Created_Date,'1971/12/31') = month(getdate())-1
If you are looking for last month so try this,
SELECT
FROM #emp
WHERE DATEDIFF(MONTH,CREATEDDATE,GETDATE()) = 1
If you are looking for last month so try this,
SELECT
FROM #emp
WHERE DATEDIFF(day,CREATEDDATE,GETDATE()) between 1 and 30
A simple query which works for me is:
select * from table where DATEADD(month, 1,DATEFIELD) >= getdate()
If you are looking for previous month data:
date(date_created)>=date_sub(date_format(curdate(),"%Y-%m-01"),interval 1 month) and
date(date_created)<=date_sub(date_format(curdate(),'%Y-%m-01'),interval 1 day)
This will also work when the year changes. It will also work on MySQL.
Using SQL Server 2005 I have a field that contains a datetime value.
What I am trying to do is create 2 queries:
Compare to see if stored datetime is of the same month+year as current date
Compare to see if stored datetime is of the same year as current date
There is probably a simple solution but I keep hitting brick walls using various samples I can find, any thoughts?
Thanks in advance.
Compare the parts of the date:
WHERE YEAR( columnName ) = YEAR( getDate() )
While the other answers will work, they all suffer from the same problem: they apply a transformation to the column and therefore will never utilize an index on that column.
To search the date without a transformation, you need a couple built-in functions and some math. Example below:
--create a table to hold our example values
create table #DateSearch
(
TheDate datetime not null
)
insert into #DateSearch (TheDate)
--today
select getdate()
union all
--a month in advance
select dateadd(month, 1, getdate())
union all
--a year in advance
select dateadd(year, 1, getdate())
go
--declare variables to make things a little easier to see
declare #StartDate datetime, #EndDate datetime
--search for "same month+year as current date"
select #StartDate = dateadd(month, datediff(month, 0, getdate()), 0), #EndDate = dateadd(month, datediff(month, 0, getdate()) + 1, 0)
select #StartDate [StartDate], #EndDate [EndDate], TheDate from #DateSearch
where TheDate >= #StartDate and TheDate < #EndDate
--search for "same year as current date"
select #StartDate = dateadd(year, datediff(year, 0, getdate()), 0), #EndDate = dateadd(year, datediff(year, 0, getdate()) + 1, 0)
select #StartDate [StartDate], #EndDate [EndDate], TheDate from #DateSearch
where TheDate >= #StartDate and TheDate < #EndDate
What the statement does to avoid the transformations, is find all values greater-than or equal-to the beginning of the current time period (month or year) AND all values less-than the beginning of the next (invalid) time period. This solves our index problem and also mitigates any issues related to 3ms rounding in the DATETIME type.
SELECT * FROM atable
WHERE
YEAR( adate ) = YEAR( GETDATE() )
AND
MONTH( adate ) = MONTH( GETDATE() )
It sounds to me like DATEDIFF is exactly what you need:
-- #1 same month and year
SELECT *
FROM your_table
WHERE DATEDIFF(month, your_column, GETDATE()) = 0
-- #2 same year
SELECT *
FROM your_table
WHERE DATEDIFF(year, your_column, GETDATE()) = 0
The datepart function lets you pull the bits you need:
declare #d1 as datetime
declare #d2 as datetime
if datepart(yy, #d1) = datepart(yy, #d2) and datepart(mm, #d1) = datepart(mm, #d2) begin
print 'same'
end
You can use something like this
a)
select *
from table
where MONTH(field) = MONTH(GetDATE())
and YEAR(field) = YEAR(GetDATE())
b)
select *
from table
where YEAR(field) = YEAR(GetDATE())