I recently took on a project built on XUL (standalone, using xulrunner) - However I can't get it to properly run.
I'm getting this error when I attempt to start it using the command line (xulrunner.exe ../application.ini -jsconsole):
No chrome package registered for chrome://case_scenario_builder/content/case_scenario_builder.xul
The chrome.manifest file looks like this:
content case_scenario_builder file:chrome/case_scenario_builder/content/ contentaccessible=yes
content jslib jar:chrome/jslib.jar!/
skin case_scenario_builder skin file:chrome/case_scenario_builder/skin/
locale case_scenario_builder en-US chrome/case_scenario_builder/locale/en-US/
Any ideas on where I could start debugging?
I figured it out!
In case anyone else runs into this as well:
It was due to the caching system in place by default and the use of .jar containers instead of folders.
The XUL environment had cached both JS and XUL files - and even after disabling those, I had to extract everything that was in the .jar file to the content folder and update the chrome.manifest file.
Thanks for your suggestions on debugging! - they helped the process.
I guess your manifest just isn't getting loaded. To test that I'd introduce an intentional syntax error and check the error console. E.g. if you put
asdfasd
on its own line, you should get a Warning: Ignoring unrecognized chrome manifest directive 'asdfasd'. in the Error console.
(Note to other experts: initially I wanted to suggest dropping 'file:' prefix and avoiding underscores in the package name, but I tested it on a Firefox nightly, and it works fine.)
Your chrome package clearly didn't get registered. From what I can tell, the reason is the bogus file: prefix, you should drop it when specifying relative paths:
content case_scenario_builder chrome/case_scenario_builder/content/ contentaccessible=yes
Btw, I suspect that you copied contentaccessible=yes from somewhere - you should drop it as well unless you know what it does.
Related
after changing a specific file's extension from .ts to .tsx I get:
Compiled with problems:X
ERROR in ./src/components/SomeComp/someFile.ts
Module build failed (from ./node_modules/source-map-loader/dist/cjs.js):
Error: ENOENT: no such file or directory, open '.../someFile.ts'
ERROR
No files matching 'C:\Users...\src\components\SomeComp\someFile.ts' were found.
it has happened recently and somehow figured out on its own,
then i switched branches and when returned it happened again
I tried what was suggested here, clearing the browser cache How to get Chrome to reload source maps?
also restarted the react dev server couple of times
but still it tries to find the file with the old .ts extension...
searched as much as I could but didn't find a solve...
edit:
after changing the extension back and forth and restarting the dev server it has figured out, but I would still love to know what was happening and what perhaps what should be done to handle this situation correctly in the future
I work still view month on a project with RapidClipse 4.0
I deployed on the production server several versions of the project war files. Everything worked fine.
After the last deployment I got a blank screen after loading the application URL
For the server I use a docker container with following setting:
Apache Tomcat/8.5.43, JVM: 1.8.0_222-b10, 3.10.105, amd64
My first thought was: "ok you did something wrong in your code.. turn back and every thing is fine.... :-((
It wasn't !!
I used several versions which runs fine befor.
I stopped the application, redeployed it and deleted it.
Then I deployed an older version....and once again a version older..a.s.o
Non of the versions which worked fine befor did work again.
I got every time the same result: after loading the application a blank white screen.
So far so bad:
I tried to look into ../conf/server.xml if deployment parameter is set correctly:
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true">
looked fine!
I enhanced the cache by:
$CATALINA_BASE/conf/context.xml added following code:
<Resources cachingAllowed="true" cacheMaxSize="100000" />
also without success.
I tried to look in catalina.out: There is still nothing helpfull:
14-Aug-2019 20:29:21.087 INFO [http-nio-8080-exec-6] org.apache.catalina.startup.HostConfig.deployWAR Deploying web application archive [/usr/local/tomcat/webapps/RC_07.war]
14-Aug-2019 20:29:31.190 INFO [http-nio-8080-exec-6] org.apache.catalina.startup.HostConfig.deployWAR Deployment of web application archive [/usr/local/tomcat/webapps/RC_07.war] has finished in [10,102] ms
after debug in browser I got following:
257ms Processing time was 134ms
257msReferenced paintables: 6
283msEstablishing push connection
300msCould not load theme from http://myIP:8888/RC_07/VAADIN/themes//styles.css?v=7.7.13
310msPush connection established using long-polling
I searched also in the history of the docker container an found that this problem (300ms....) still persists from beginning, over all versions I deployed before.
Out of this, I assume, that this could not be the reason, too.
Or am I wrong?
I searched around this VAADIN Problem and found a lot, but I was not able to solve it. The styles.css file are still in place on the server.
I am wondering on ..../VAADIN/themes//styles.css...
the double slash in error message.
But in my code I couldn't find similar.
Also the buildpath in eclipse includes the folder structure like expected.
Now I am at the end!
I am confused, how I should go ahead to figure out the reason for this behavior, or much better to fix it.
Any idea/ help would be welcome!!
Thank you in advance
rgds
OpaHeinz
After long research, togehter with RapidClipse support we found the solution.
I had two issues:
1) unknown how, we assume, that there was an error in the MainUI xml file.
After resetting with and high of view and layout, and turning back to setting before,
the page elements were visible again in design view.
2) there is a parameter for the theme under MainUI properties - misc -
This parameter was set, but without content. This results in a code line: this.setTheme("");
After resetting this, a deployment was possible like before.
Everything is fine now.
Thanks again to RapidClipse support.
I keep receiving this error when running my App.js for React Native that was working perfectly well before I attempted installing Victory charts. Somehow something broke and after over three hours of work I am unable to figure out a solution. I have tried everything I could find on the web including uninstalling watchman, reinstalling watchman, reverting to React Native 0.55.4, some other recommended commands. Nothing is working.I am so confused.
$ yarn add react-native-scripts
This helped.
I think the other library may hurt the installation part of your package. To solve this issue on IOS you need to add its library like below:
First do 'yarn add react-native-scripts'. In the case that it dose't work continue other steps.
1-Go to the node module of your project and find the package folder and find the ios file inside it.
2- Then drag it into ‘library’ section of your xcode. (It is the subset of your project folders)
3- Then go to ‘build phase’ and in the ‘Link binary with libraries’ add it there by clicking on the plus sign
4- Then in some cases you need to add the correct path of the ios file inside your node module in the xcode. To do that you should go to ‘build setting’ section in the xcode and search header there. Then you need to add the path there below other paths.
5- Then clear everything (cmd+shift+k) and then finally compile it.
I hope it works for you.
In my case the "crna-entry.js" file does exist in the roots and my project should work (nothing have been modified from last time when it does work).
After hours searching, finally I figured out the reason:
the packager's directory checking is case-sensitive and in windows terminal the drive "c:/" will not be auto-corrected to "C:/" which will lead to error.
Hope this will help someone who gets the same error.
Below is the full error message:
The development server returned response error code:404 Cannot find
entry file node_modules/react-native-scripts/build/bin/crna-entry.js
in any of the roots:
I've performed an update from typo3 4.7.20 to 6.2.15. The process worked fine and there were no critical errors while running the install tool.
The frontend looks fine but the backend is broken:
I've removed all uncompatible extensions before I run the update. I've also checked all settings in the installationtool und deleted the temp/cache folder first.
I've got the feeling that the error is caused by the TemplaVoila! extension, I'm using v. 1.9.8. Firebug does not shows any error.
Does anyone had a similar problem and have already solved it?
Thank you very much!
I have come across this one multiple times. More often it is because there is a broken TBE_STYLES. I suggest you look around for $TBE_STYLES in your typo3conf folder and disable it for the time being. Most likely it will be in the extTables.php or some other file which is included dynamically.
seems BE is working, but you css does not got loaded.
check your 'web inspecter' to see if you get errors on loading CSS.
clear your cache (remove everything in typo3temp) and try again
I'm trying out casperJS to run some automated tests. On windows. I followed this installation guide but am stuck.
when I try to run a simple test from the command line like this:
casperjs.bat smoketest.js
I get the following error:
Error: Cannot find module 'C:/code/base/main/Shared/casperjs\modules\cli.js'
I checked, and the file cli.js does exist under the specified path.
I thought the problem could be the mixture of forward and backward slashes in the path, but I edited the bootstrap.js casper code to hard code the path and it made no difference - it still the cannot find module.
I'm have tried this using phantomJS version 1.9.0, and 1.8.2.
Anyone know what I am doing wrong?
Has anyone had success running casper on Windows?
This is due to a bug in PhantomJS 1.9.0 that does not allow for absolute path loading in Windows. Afaik, this should only be apparent if you are using a master build of CasperJS (v1.1).
This bug has been fixed, but is not yet in the Windows binary. You can compile it yourself if you'd like, but that can take quite a bit of time.
I was using the master build of casper. With the latest released version, 1.0.2, it works fine.