I'm running a mongodb process with the following line:
/usr/bin/mongod --dbpath /var/db/mongo --journal
According to mongodb's docs:
http://www.mongodb.org/display/DOCS/Http+Interface
I should be able to access the http console with http://myhost:28017
When I attempt to access the page it asks for authentication.
According to the docs if security is configured I would need to authenticate. But after looking at mongodb.org/display/DOCS/Security+and+Authentication it seems clear to me I'm not using any authentication. I don't run the process with the --auth option, nor are there any users when I run a db.system.users.find() command.
What's going on here?
I have been able to reproduce this, and this is not the intended behavior. I have filed https://jira.mongodb.org/browse/SERVER-4601 The fix version is 2.1.1
Thank you for bringing this to our attention!
In the meantime, there are two work-arounds:
1) Enter the credentials for authentication in the browser pop-up window
2) Remove all user credentials from each of your DBs (including admin) using db.system.users.remove()
Either of these should allow you to view the http console.
Greetings Brain,
i am using mongo V 2.4.6 and its on default port 27017, its http console is enabled by default but when you try to access from Network it ask for password and i dont know why as i am new to this and dont know the exact reason. by i have a way to access it.
Create a tunnel to your mongo Server and when you access, it wont ask for password. and if you are using putty.
enter host name
go to ssh on left menu options and click +
Than Click on tunnel
in Source port type 28017
in destination type localhost colon port 28017(sorry dont know how to write http url in localhost here in my post)
not click open and provide ssh username and password
now open browser on PC from where you are doing ssh .Type localhost and port 28017
and Boom its accessible and wont ask for username and password. hope it work for you, let me know if u need any help.
Related
I am trying to create a federated authentication using the Keycloak and following the steps mentioned here: Setup User Federation with Keycloak
I have been using the port 10389 instead of 389 mentioned in the document. Everything seems to be working fine until the step where I am making the connection from Keycloak to LDAP.
When I provide the Connection URL as ldap://localhost:10389 and click on the Test Connection then I get the error:
Error! Error when trying to connect to LDAP. See server.log for details
I am not sure what's wrong because when I check in the Apache Directory Studio there everything seems to be working fine for me and I am able to get all the users list etc. I am not sure why I am unable to make the connection from Keycloak to LDAP.
I tried the following things but nothing worked for me:
ldap://localhost:10389
localhost:10389
ldap://127.0.0.1:10389
ldap://localhost:389
Stopped the docker in the dashboard and started again.
After trying a lot I found the solution. Posting the answer as it can be useful to someone else in the future.
I was using the localhost and 127.0.0.1 which was not working. Finally, I checked the IP Address of my system using the terminal (for mac ipconfig) and tried that and it worked:
ldap://192.168.1.12:10389
We want to run two Jenkins instaces on the same server.
To log in Jenkins (using version 1.595) web GUI we are using the LDAP plugin (version 1.11). "Project-based Matrix Authorization Strategy" is selected and my user is granted admin access here. So once I am able to login I have admin rights. The symbol to the left of the users added in the matirx shows a "little man" so the user seems to be found on LDAP.
CASE 1: If I type in my credentials CORRECT I get redirected
to the page that was open just before I clicked the "log in" button.
NOT good -> Without allowing anonymous user to administrate I have no chance of doing anything.
CASE 2: If I type in them WRONG Jenkins tells me "Invalid login information. Please try again."
good -> as expected.
Also tried "Anyone can do anything" as security setting. Using this I do not get redirected to the login form, but to the last visited page from where i called the "login".
It does't matter what type of Internet Explorer I use. The result is always the same (Chrome, Firefox and Internet explorer were tested).
I already discussed with the colleague responsible for the LDAP maintenance. The incoming information are handled correctly (-> LDAP settings within Jenkins must be correct). But this fact is clear since wrong login information leads to "Invalid login information page", but correct login information do not.
Also made sure that the firewall makes no problems.
Do you have any idea why this is not working? Or what the reasons could be?
Is it possible that there is kind of a "redirection link" for logins?
Hard to say from the information you've provided, but one thing to check is that the casing on your username exactly matches the name you have set up in matrix authentication. LDAP is not case sensitive but Jenkins is, which means that you can be authenticated successfully without having the administrative access you are expecting.
One way to proceed would be to add the 'authenticated' (case sensitive) user to your matrix with some limited permission set and see whether you are able to get past the login page.
I found one reason!
After deleting the environment variable JENKINS_HOME I was able to login into Jenkins... At least via localhost. Before even this login wasn't possible too. As we run two instaces of Jenkins on the same Server it seems like they want to use the variable both -> leads to failures. But if I try to login via network from another PC I still can't login (same as before). The variable JENKINS_HOME gets set (as before) within the jekins.xml in jenkins installation folder so the enironmentvariable is properbly not in need. I opend a new question, as this is now an Apache error.
I guess the reason why I can login via localhost, but not via network must be our Apache 2.2 server which is handling information wrong. By using localhost I can bypass Apache (-> works) but via network Apache gets used (-> don't work).
Link to the new question: Jenkins behind Apache Server / Can't log in Jenkins
I'm having trouble connecting to Navicat using an SSH Tunnel and seem to have all my ducks in a row, so wondering if anyone else who had done this has had success:
I set up a normal (TCP) user and checked the connection (host, port, user, password, and remote access ip added in cpanel) to make sure it worked.
As per the instructions, I then went to the SSH tab and enabled it ([x] SSH Tunnel).
I added the same IP for host, then 22 for port, then added root as user, selected password as authentication and then entered the root password.
I keep getting a host.mydomainame.com cannot connect to this mysql host.
I know it is working because:
a) if I use the wrong user/pwd I simply get a 'could not create tunnel' error
b) my host confirms that an SSH connection IS created the moment I connect with the correct root/pwd combo (even though the error message is generated on my side)
BTW as per Navicat I ensured that AllowTcpForwarding is set to yes.
I also confirmed using bithive I can connect to the same server from the same IP with the same user.
Figured this out so thought I'd update so anyone else having issue can make this work. Answer turns out to be pretty basic.
The 'General Tab' where you set your MySql User has to have localhost, not the hostname or ip as it usually does, since the SSH Tunnel Tab creates the connection to that host first.
In my case, I used a PuTTYgen -> Load an existing private key file -> Conversions -> Export ssh.com key and that solved my issue!
I have 6 VPS' with CPanel / WHM on. I currently have an admin section on each one that I use to create accounts and start some Crons. I would like to manage all this from one server but I can't connect using my script unless I use it on the server I am calling it for.
The error I get is: curl_exec threw error "couldn't connect to host" which I presume means the connection is actually being blocked. I have added a firewall rule for my admin server's IP but that doesn't help.
What do I need to allow in order to use the API cross server?
p.s I am using User / Pass authentication with PHP.
EDIT: Ok I can connect when changing the port to 2087 but get access denied messages.
Thanks.
OK sorted it.
I needed to change the port I was connecting on to 2087 (from 2082) and use the WHM root login credentials.
I installed Oracle 10g express. Installation went well, But the home page is not coming up.
I can connect using sqlplus but not with Sql Developer.
I checked tnsnames.ora and listener.ora everything looks fine.
Listener is also started. I can always reinstall and see. But I thought better inquire the cause.
Regarding the home page. This is the address that comes up in browser. Localhost:8080
http://127.0.0.1:8080/apex
I did a netstat to see whether there is any port conflict for 8080, but that port is not in use.
Have anybody faced this issue?
Yes. It is practically a FAQ on the XE Oracle forum.
Firstly, can you connect to Oracle using
sqlplus user/pass
If so, Oracle is up an running (which appears to be your situation, but may not be for a future reader with a similar problem). If not, you can try
sqlplus / as sysdba
startup
Once Oracle is up, check that the listener can see the Oracle instance by
sqlplus user/pass#xe
If not, then either the listener is not up, or the 'listener does not know of the service'. Make sure the listener is started (lsnrctl, then start). Make sure the database is registered with the listener
sqlplus / as sysdba
alter system register;
Now you should be able to connect using the '#xe' syntax. Worthwhile verifying the embedded PL/SQL gateway is set up to use the 8080 port
select dbms_xdb.GETHTTPPORT from dual;
On Windows you can use netstat -ab to see if tnslsnr.exe is listening on the port.
Then I'd suggest looking at browser settings (specifically any proxy settings that might be forwarding your request to a machine that has no idea what to do with it) and firewalls (which could well be set to ignore or hide any access to the port).
I had the same problem. I tried this and it sorted out my problem...
1. goto start->run
2.type services.msc and hit enter
3.In the applet that opened, scroll down(in right pane) to figure out the option of "OracleServiceXE" and right click on it. 4. In general tab do->>> startup type "Automatic" and click the "start button".
5. Repeat step 4. for the option "OracleXETNSListener".
close the window.
now, i hope, the problem should be solved....
Check your windows firewall,If it is on it blocks the opening of the homepage.Either you shut down the windows firewall or allow these following ports :
1521: Oracle database listener
2030: Oracle Services for Microsoft Transaction Server
8080: HTTP port for Oracle XML DB and the Oracle Database XE graphical user interface
See software requirements in the below URL:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABEBCDB
It worked for me!
Try this ( I'm assuming Windows system )
using
netstat
without anyother parameter would tell you if port 8080 is already open.
Also you can try this:
telnet localhost 8080
If the server answers ( the screen goes blank [or black] ) then the server is up and running.
Try using your hostname instead of localhost.
See if you're using a proxy and not skipping the local addresses.
Also you can see what's the executable that starts the home page and see if it could start successfully.
Thanks for the response guys.
I finally figured out how to solve the issue, but not really the root cause.
Problem 1 - Can not login to oracle admin console.
It was the problem with not adding 127.0.0.1 in the IE intranet sites.
Go to tools>internet options>security>local intranet sites>advanced>
add http://127.0.0.1:8080/apex in the list.
It works fine after this.
But if I go back to the same place again and see the sites, I cant find the url I added sometimes back... Dont know why that is happening. May be some company security is messing up.
Anyways the admin console is now coming up.
Problem 2 - Cannot connect using SQL Developer.
After I did the fix for problem 1, this is also magically working.
I still don't know how security settings in IE affects SQL Developer?
Any comments on this?
hey guys one important fact if u r using IE7 (explorer7) then u wd face certain problem in using 10g, such as not displaying home page.
For Windows 8 simply click on Get Started With OracleXE.... When internet explorer opens up, select the View on the desktop option in the Page View icon (icon with a wrench).
You should now be able to view your page.
I had a similar problem, I was able to connect to SQLPLUS using terminal but on access in browser as it was showing error as you have described. So, I went back to terminal and mounted my database using
startup
and it resolved my problem. This might be the case.