Here is my little test image:
http://imageshack.us/photo/my-images/851/testnb.jpg/
Basically they are two images, as you can see on the left is the 1st one and on the right the 2nd one. (and yes, I know one of the images has overlapped and "cut" off the wire)
Unfortunately my lighting was bad so I didnt get the same background color or this would have been easy.
But now that you see it, how do I make it so that it looks like it is one picture? (How do I get rid of that middle seam and get the same background color?)
Thanks!
you can try with this: select part one of your picture (layer) then image-->adjustments--match color then select your sorce psd (the same) and the level !
It's not always a great solution but give it a chance!
Or you can play araound with layer masks and layer effects
Related
I've been searching around the web about how to do this and I know that it needs to be done with OpenCV. The problem is that all the tutorials and examples that I find are for separated shapes detection or template matching.
What I need is a way to detect the contents between 3 circles (which can be a photo or something else). From what I searched, its not to difficult to find the circles with the camera using contours but, how do I extract what is between them? The circles work like a pattern on the image to grab what is "inside the pattern".
Do I need to use the contours of each circle and measure the distance between them to grab my contents? If so, what if the image is a bit rotated/distorted on the camera?
I'm using Xamarin.iOS for this but from what I already saw, I believe I need to go native for this and any Objective C example is welcome too.
EDIT
Imagining that the image captured by the camera is this:
What I want is to match the 3 circles and get the following part of the image as result:
Since the images come from the camera, they can be rotated or scaled up/down.
The warpAffine function will let you map the desired area of the source image to a destination image, performing cropping, rotation and scaling in a single go.
Talking about rotation and scaling seem to indicate that you want to extract a rectangle of a given aspect ratio, hence perform a similarity transform. To define such a transform, three points are too much, two suffice. The construction of the affine matrix is a little tricky.
My problem is three-fold. I'm going to try to explain as detailed as I can, because I've asked this question before and haven't gotten any clear answers.
What I'm Trying to Do:
I have diagonally shaped images, that I'm trying to make clickable, so I separated them out of the background image. They were originally one image, but I've cut out several pieces of the image and I want to align them identically to how they were in the original image. This might not the best method for what I am trying to achieve, and if there is a better way to make non-square areas of an image clickable, that would solve all of these problems. If not, here is my problem. The problem is, as soon as I align them in XML, I boot them up on an Android emulator or my phone, and they are aligned differently on both, differently than the preview and from each other.
Below is my example, and I'll try to explain what I mean.
The black and white grid is my background. The brown, red, and yellow lines are separate images. I don't want to just combine them with the background, because I need those lines to be clickable. I'd set a button behind them, but they are diagonally shaped and I need the entire shape to be clickable. However, they have to be EXACTLY where they are in the background, aligned specifically as they are to the background. The problem is, as soon as I load it on another device, it scales, and everything misaligns.
It also misaligns depending the device, so I presume it's because it's scaling the different parts differently.
I need a way to align it the way I want it, and have each image scale together.
How I've Been Trying This So Far:
Initially, I tried just using XML. And herein was my first problem. My background image is 1920x1080. It loads on the emulator without a problem. However, if I try to load it on my phone, I get the following error:
OpenGLRenderer: Bitmap too large to be uploaded into a texture (5760x3240, max=4096x4096)
So that leads to my first question. Why is my 1920x1080 trying to load as 5760x3240?!
I bypassed this, by using Picasso to scale the image to 1920x1080. As a sidenote, in addition to programmatically loading the image, I also am removing the title bar. Here is my OnCreate:
super.onCreate(savedInstanceState);
this.requestWindowFeature(Window.FEATURE_NO_TITLE);
this.getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN, WindowManager.LayoutParams.FLAG_FULLSCREEN);
setContentView(R.layout.activity_main_layout);
Picasso.with(this).load(R.drawable.backgroundimage).resize(1920,1080).into((ImageView)findViewById(R.id.background));
On the XML side, I've tried all sorts of different things. Relative layouts, linear layouts, frame layouts...None seem to scale the separate imageviews the same.
Which leads to my second question.
How do I scale two differently sized imageviews together, so that they maintain their alignment on different sized devices?
My second imageview is 198x547(this would be the equivalent of one of the squiggly lines in the example images) and even setting that in Picasso does not maintain my alignment. In fact, that doesn't seem to work at all, since I have to scale it differently to even match the alignment I have in the original image.
Summary Questions
I need a diagonally shaped portion of an image to be clickable. Is cutting the shape out as a separate image the appropriate method for doing so? If not, how do I make such a specific, non-square area of an image clickable?
I need specific alignments to scale together. Why aren't they?
Why does my png file upscale itself?
Good morning!
I'm currently trying to create a view similar to this mockup.
I have put down 3 different screen sizes so you can see the issue.
I have a header background image (grey box) with an angled bottom. On the right I want to display an image, which obviously needs to be positioned.
Positioning it horizontally is no issue but how can I position the image vertically? I have it positioned fixed for one screen size but obviously need to make it flexible.
Any ideas? Help would be much appreciated!
David
You can definitely use measure as #rajesh pointed out, or you can use Dimensions. As far as getting the layout consistent across devices, using position absolute and measuring the device height should allow you to get consistency across these devices.
Check out this example I set up, it should be a good starting point at least.
https://rnplay.org/apps/pSzCKg
We have a system where people are being taken a face shot via a DSLR camera. We need the people's images with transparent background. What we're currently doing is taking the image and editing and cropping it in Photoshop, removing the background image with the Magic Eraser tool.
What I am looking for is a way to parse the image and automatically erase the semi-white background we have, along with the resizing and cropping. Is there some kind of library or code sample that does this without requiring manual intervention?
This is a real complex problem. Like the answer below suggested you'll need to do a fuzzy match on each pixel and set it to be transparent but you also need to detected other nearby pixels to make sure they are not close in color. A white tag on the shirt, white eyelids, hair, pale skin reflecting the flash. All are candidates to be removed by any greedy fuzzy logic.
Think about the Magic Wand tool in Photoshop. How good is it at detecting the edges of the person in the picture? Yeah, and that's the top standard of image editing software with thousands of engineering hours behind it.
This is not a feasible request for a Q&A format, and this is one of those things that humans just do better than machine. BUT, that doesn't mean it's not possible, and who knows, you might be the one to do it. Just don't do it in VB.NET please :)
Some pseudo-code to get an idea of what you need to do:
Bitmap faceShot = Bitmap.FromFile(filepath)
foreach pixel in faceShot
//the following line is where the magic happens, you can do any fuzzy match on the color that suits you
//figure out your color range and do a fuzzy match percentage wise
if (pixel between RGB(255,255,255) and RGB(250,235,215)) //white and antique white
pixel.setAlpha=0
endif
end foreach
You could start with this as a starting point for processing a single image,
http://www.java2s.com/Code/VB/2D/ProcessanImageinvertPixel.htm
Basically, if you have a constant background color (like the TV green-screen), it's just a matter of selecting pixels close to the color you are erasing and setting their Alpha level to 0 (transparent). Treating the RGB values like XYZ coordinates, you can do a 3d distance from your background color, and make everything within a certain threshold transparent.
As an improvement, you could also make everything within another threshold semi-transparent so the edges right around hair and stuff like that look softer and less harsh.
Alternatively, you could probably do the same exact thing with good results in Photoshop, as it should support batch processing.
Edit, thinking about it some more, you may want to use a green screen type background as well instead of an off-white one like you stated, as you may make people's eyes transparent. I would definitely try to batch it in Photoshop/Gimp/etc.
I'm searching for a posibility to crop UIImages. I've found lots of examples via google how to do this, but I want to do a bit more than just croping the image.
It would be nice if the user can choose which area of the UIImage will be crop. In other languages, for example Javascript, there are many plugins to do that. I'm looking to find something like this:
http://odyniec.net/projects/imgareaselect/
Does anybody know if some similar project exists for objective-c? Thank you!
after days of searching I found out that there is no "plugin" which is similar to ImgAreaSelect. :-(
The best thing I found was this:
https://github.com/barrettj/BJImageCropper
It wasn't very hard to adapt this project to my needs: now I can choose a proportional area with min size. :-)
You could always make a black&white mask of this area and then mask the image (white area on mask will result in transparent area on masked image).
Link to nice tutorial on how to mask an image.
As an addition you could later calculate the miminum square frame that holds complete masked (cropped) image and crop the result - to get rid of excess transparent areas.