At first, I tried to fix my problem of npm instruction
so I added
[interop]
appendWindowsPath = false
to /etc/wsl.conf
It works, but another problem happen.
When I type code .
Command 'code' not found, did you mean:
command 'node' from deb nodejs (12.22.9~dfsg-1ubuntu3)
command 'cdde' from deb cdde (0.3.1-1build1)
command 'ode' from deb plotutils (2.6-11)
command 'tcode' from deb emboss (6.6.0+dfsg-11ubuntu1)
command 'cde' from deb cde (0.1+git9-g551e54d-1.2)
Try: sudo apt install <deb name>
The above Error message appear.
I tried the following instruction
export PATH=$PATH:"/mnt/c/Users/%USERNAME%/AppData/Local/Programs/Microsoft VS Code/bin"
It also works properly.
Whenever I restarted WSL, npm instruction still worked well, but code instruction lost its function again.
What should I do to fix the problem?
Thanks in advance!
My main suggestion would be to not use appendWindowsPath = false to fix your NPM problem. That's like using a sledgehammer as a flyswatter. As I said in this answer:
Please do not follow the recommendations (like this answer) to completely remove all Windows paths from WSL, as that will severely limit your ability to run Windows applications in WSL (one of its great features).
You'll also lose access to the ability to run PowerShell scripts and commands in WSL easily. You won't have direct access to wsl.exe itself from inside WSL (which comes in handy).
You can type the full paths to these commands, of course, but most instructions and other answers you find here are going to assume that you've left the Windows path intact.
Instead, figure out where npm is installed in your WSL distribution and then determine why it is further toward the end of the PATH than your Windows directories. Windows paths are added at the end of the Linux PATH for a reason. If something in your startup files is adding to the path, it should put it at the beginning, so it has precedence. E.g.:
export PATH="newdir:$PATH"
Note that I'm not saying that you should change your export statement above since, as mentioned, that Windows path would normally come at the end anyway. It's really not going to matter unless you put another code executable somewhere else in your path.
Whenever I restarted WSL, npm instruction still worked well, but code instruction lost its function again.
If you do want the "quick and dirty" (not recommended) solution, then you can simply add that export command that "makes it work" to your ~/.bashrc. That file is processed each time the Bash shell starts interactively.
So I did a fresh install of Arch Linux on my desktop and installed i3wm with it. After updating the repo's following the first reboot I began to add some packages I am familiar with that I can remember off the top of my head. After making sure my wireless internet was working I began to add apps to install to get me all set up and 'pamac-aur' was one of them. After I couldn't remember anymore apps to install I turned to pamac to help me with the rest, only it wouldn't start. I got a "Authentication failed" error. So I did some research and 95% of the posts I read mentioned adding 2 lines to my i3 startup config.
exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 &
exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 &
I currently have tried both of those lines and each one separately as well since they are almost identical and pamac is still giving me the "Authentication failed" error message. I can 'sudo pacman -Syu' and 'yay -Syu' from the command line but since I am still new with i3 and linux in general, I like referring to an application that shows pictures of different packages and a 'one-stop-shop' to install everything in one go.
So beyond those two lines in my i3 config, I don't know what else to try. Any help is greatly appreciated!
Have you already checked if you have polkit-gnome installed?
This is the package that provides the binary you are trying to execute with the lines you mentioned in you config:
pacman -Syu polkit-gnome
After installing it I would check if it works when starting the agent manually by executing the following in the terminal:
/usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
Then run pamac and try to install/remove/update a package with it. When a popup appears that wants you to authenticate yourself it was a success.
Then you can add the line to your i3 config.
Also the the second line without the ampersand at the end is enough for your i3 config:
exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
For the new line in the config to take effect you would have to, after saving the file, logout and login again.
I recently moved my wsl directory to another drive due to low storage in C: drive. As per the answer provided in this StackOverflow post, I used lxrunoffline tool and moved my Ubuntu distribution to another drive (E:\wsl in my case). As soon as the distribution was moved successfully, I ran wsl to test and it worked like a charm.
Everything went fine until one day I accidentally renamed the E:\wsl folder to something else. Well, as expected, wsl didn't work. Then, I reverted back to the name wsl and expected it to work but to my surprise, it didn't find any installed distribution after that even though it's installed... 😕
E:> wsl
Windows Subsystem for Linux has no installed distributions.
Distributions can be installed by visiting the Microsoft Store:
https://aka.ms/wslstore
Is there any way to revert back to the old directory or make wsl point to a manual location?
EDIT: I don't want to reset Ubuntu as I want to retain the installed packages and preferences...
Well, I finally found a solution to this problem. 😊
This is as simple as registering the distribution using lxrunoffline tool using the rg or register command.
E:\LxRunOffline\LxRunOffline-v3.3.3>lxrunoffline rg
[ERROR] the option '-d' is required but missing
Options:
-n arg Name of the distribution
-d arg The directory containing the distribution.
-c arg The config file to use. This argument is optional.
After running the register command, I was able to start wsl as usual. But that would log you in as a "root" user and would thus start in "/root" directory. I ran the following command to start wsl as different user (this is for Ubuntu):
ubuntu config --default-user <user-name>
I recently saw that ChromeOS added the functionality to do split screen windows in tablet mode in the most recent dev releases. So I put my Chromebook R11 in dev mode for the first time and updated to version 62.
The flag is one of the many on this list https://peter.sh/experiments/chromium-command-line-switches/
The only resources for actually executing these switches was http://www.chromium.org/for-testers/command-line-flags
So I tried following the steps. I went to the crosh shell with Ctrl-Alt-T. Then I typed "shell". Then "sudo su". Then I tried to modify with "sudo vim /etc/chrome_dev.conf", but it was readonly so it didn't save.
So I visited here www dot chromium dot org/chromium-os/poking-around-your-chrome-os-device and followed the steps to making changes to the filesystem and disabling rootfs verification. But the command it told me to enter just gave me an error: "make_dev_ssd.sh: ERROR: IMAGE /dev/mmcblk0 IS NOT MODIFIED."
I'm running out of ideas and resources here..
make_dev_ssd.sh is how you disable rootfs verification and modify files in the rootfs. If that's not working, that might be a bug in that script that should be reported & fixed upstream (e.g. https://crbug.com/new).
That said, are you sure you need to pass a command line flag ? Look at chrome://flags and see if the feature you want to access is available there. Many command line flag is also available on that page.
Try this:
sudo su
cp /etc/chrome_dev.conf /usr/local/
mount --bind /usr/local/chrome_dev.conf /etc/chrome_dev.conf
echo "--arc-availability=officially-supported " >> /etc/chrome_dev.conf
I'm following the instructions found here.
When I try to run $ heroku pg:psql or $ heroku pg:psql HEROKU POSTGRESQL_BROWN I recieve the following error message:
! The local psql command could not be located ! For help
installing psql, see local-postgresql
I can't find anything useful on the link it gives me (it just links to the instructions I was already using, but further down the page) nor can I find this error anywhere else.
If I've missed anything you need to know to answer this, just let me know. I'm rather new to all this and teaching myself as I go.
I had same error even after installing Postgres locally.
But after seeing this
I saw that "pqsl" was not in the PATH so I then did
PATH=%PATH%;C:\Program Files\PostgreSQL\9.2\bin
which worked for me
I have since solved this myself. When I ran heroku pg:info it says the version number is 9.1.8, I was locally running 9.2
installing 9.1.8 and ensuring Path pointed to the appropriate folder solved the problem.
After you change the path, make sure to restart the terminal!
Set the PATH. To find out the PATH of your psql script (on mac) open the sql shell script from your finder in Applications/Postgres installation. This will give you a hint as to where it is installed. That opened a window which told me it is located here: /Library/PostgreSQL/8.4/scripts/runpsql.sh
Then, I set the PATH variable from the terminal window by typing:
$ PATH="/Library/PostgreSQL/8.4/bin:$PATH"
(depends on the location of your PostgreSQL installation, find your bin path first, another exp: /usr/local/Cellar/postgresql#9.6/9.6.8/bin)
OR.....
You can also connect to the shell by opening the shell directly from your postgres installation folder. Then enter the credentials. If you don't know the credentials, here is how to find them out:
$ heroku pg:info
=== HEROKU_POSTGRESQL_RED_URL (DATABASE_URL)
$ heroku pg:credentials HEROKU_POSTGRESQL_RED_URL
Top answer wouldn't work for me oddly, my system would not add the Path via cmd with administrator access (Not sure why).
So check this > Windows key > environment variables > system variables
And add the last line (your version may differ in the path)
Make sure you've installed the toolbelt as psql is installed by default.
However you also need to ensure you've installed a local copy of PostgreSQL; if you don't the toolbelt will be unable to find the native psql client.
Assuming you have installed a local copy of PostgreSQL, make sure you can execute psql from the command line directly (i.e make sure you PATH is set correctly ). If the command does not execute, check your PATH, if it does execute see if you can connect via the PSQL connection string provided in the Heroku control panel. If you can connect reinstall the toolbelt, if you are unable to connect provision another dev database and try again.
If there are still issues, I would suggest contacting Heroku support for assistance after verifying no API issues are listed on the status page located here.
I got rid if this annoying message on Windows by adding a path element without the spaces, i.e.
C:\Progra~1\PostgreSQL\9.4\data
instead of
“C:\Program Files\PostgreSQL\9.4\data”
I followed the instructions here: http://www.computerhope.com/issues/ch000549.htm, which worked for me if you prefer to go the point-and-click configuration of the PATH variable.
This type of error usually appears in the Windows environment, because if you do not update the PATH after installing Postgresql, heroku pg:psql command does not work.
So you need to update your PATH environment variable to add the bin directory of your Postgres installation. The directory will look like this:
C:\Program Files\PostgreSQL\<VERSION>\bin.
For more information, go to the Heroku in Local setup website:
heroku-postgresql: Local setup
I had the same problem and discovered that Heroku doesn't seem to provision the latest version of PostgreSQL by default. Where the Heroku Getting Started instructions said
heroku addons:create heroku-postgresql:hobby-dev
That provisioned a v10 database for some reason (which you can check by clicking on Heroku Postgres in the Add-ons tab of your dashboard). I deleted that database and provisioned a new database using the --version flag:
heroku addons:create heroku-postgresql:hobby-dev --version 11
As of now, at least, you can find the latest version of Postgres supported by Heroku at this link: https://devcenter.heroku.com/articles/heroku-postgresql#version-support-and-legacy-infrastructure
I'm writing this in early 2019, but according to the PostgreSQL website the next version (12) is "tentatively scheduled" for third quarter of 2019 so if you're reading this in late 2019 potentially the same problem will come up for v12 instead
On Mac you can use the following:
export PATH="/Library/PostgreSQL/12/bin/:$PATH"
The only solution that I found on Windows:
go to advanced system settings
go to environment variables
select Path variable and click Edit
add a new line and enter your bin directory path (C:\Program Files\PostgreSQL<version>\bin) and click ok
restart your terminal
enter your psql command (heroku pg:psql)