I have a piece of software called PDF2XL which is normally great for extracting tables of data from PDF files. I've used it with hundreds of files before.
This one file though, gives me gibberish output that I can't even copy and paste into this textarea correctly. All sorts of unicode weirdness.
If I copy and paste as per normal into excel/notepad I get the same issue.
I assume it's something to do with a messed up character encoding header in the PDF file? How can I change this? I'm on Windows and have no software that can edit PDFs, so if I need to edit/re-save it, please recommend a free piece of SW to do it.
Thanks!
There are an increasing number of PDF files the used subsetted fonts which is basically a custom encoding. Normally the font descriptor in the PDF should have a ToUnicode table to allow the text extraction to decode the font encoding and return the correct text.
Some PDF producers are doing this on purpose to prevent easy PDF text extraction for things such as financial reports. If there is only one font then you could manually decode the font but in my experience I have seen PDF's with multiple random encodings which makes it nearly impossible to decode automatically.
One way to test for these types of PDF's is to open the file in Acrobat, select some text, copy it and then paste it into Notepad. If the text is garbled then the PDF is using a subsetted font and there is not much more you can do. If Acrobat can't extract the text correctly then nothing else can. It may as well be a page of hieroglyphs.
Related
I regularly create documents that need Unicode characters above U+FFFF. Unfortunately, OpenOffice and LibreOffice are both unable to correctly export these characters when creating a PDF. The actual data gets mangled by a completely asinine algorithm, while the display just consists of various overlapping question mark boxes.
This is not a font issue. I embed all used fonts in the PDF and all characters below U+FFFF work perfectly fine.
Until now I have been working around this issue by mapping the glyphs I need to a custom PUA font. This solves the display problems, but obviously makes the actual content of the text unsearchable and quite fragile. I haven’t been able to find any settings that might affect the handling of Unicode characters in PDF.
Therefore I have three questions:
Is there a way to make OpenOffice/LibreOffice handle astral characters correctly on PDF export?
If not, is there an external tool that can convert .odt files to PDF while preserving astral characters?
If not, is there another good rich-text editor using a different file format that can deal with astral characters in PDFs?
I am trying to copy some text from a PDF. But When I paste it in a word file, it is just some garbage. Something like മുഖവുര. The PDF is in Malayalam language. When I see File->Properties->Fonts, It says BRHMalayalam (Embedded Subset) as shown in the screenshot.
I installed various Malayalam fonts but still no luck. Can anyone please guide me?
The PDF I am trying to copy from is https://drive.google.com/open?id=0B3QCwY9Vanoza0tBdFJjd295WEE&authuser=0
Installing fonts won't help, since they are embedded in the document. The reader will use the ones in the document.
In fact it almost certainly must use the ones on the document, because it will probably have used character codes specific to each font subset.
Your PDF probably has character codes which are not Unicode values, and does not contain ToUnicode CMaps for the fonts in question (note the same font name embedded multiple times). There is no realistic way to copy the text.
The best you can do is OCR it.
After looking at the file, and confirming the answer already given by #KenS, the problem with this PDF document is in fact how it's constructed. Or rather how the font in the document has been embedded.
The document contains a number of Times and Arial fonts, for which the text can be copied successfully. Those fonts are embedded as a subset with a WinAnsi encoding. What is actually in the file is close enough to that, that the text seems to copy out well.
The problem font (BRHMalayalam) is also embedded as a subset, and its encoding is also set as WinAnsiEncoding, which completely doesn't make sense.
And because the font doesn't contain a ToUnicode mapping table, a PDF viewer has no other choice when copying and pasting to assume the characters in the PDF are indeed Win Ansi encoding which means you end up with (garbled) latin characters.
Just convert the pdf file to word file and then edit or copy or modify the text present in the file simple :)
and after completion go to file -> save as -> and change the format of doc to pdf ..hope u understood :)
I have a few hundred PDF files from which I need to extract sections of text. For many, pdftotext works fine, but for others, it misses large sections of text. If I open the PDF in Acrobat and select that text by hand and copy/paste into emacs and then view the file without an encoding, I get stuff like this:
Husband \364\200\200\272\364\200\201\213\364 etc.
How can I extract the text correctly?
I should mention that I've tried saving as text from Acrobat; also tried applying Acrobat's Document=>OCR feature before copying.
Why not convert the PDF to doc or txt first? See the guide:
http://www.aolor.com/pdf-converter/user-guide.html
I have to make several certificates with the same design but different names. So I've tried to make an uncompressed pdf file with a place holder text and tried to change it with a text editor. For some reason it didn't work. I could only see a single letter of the replaced text.
When I try the same thing with an eps file, it works but since eps doesn't keep (AFAIK) page orientation, there is a chance that it something will be different with different names.
Does anyone know why this didn't work or how to change a text box in a pdf file (with sed)?
(I created the master pdf with Illustrator CS4)
Thank you
In general, editing PDFs in a text editor is a Bad Idea. PDFs depend on the byte offsets of various objects to not move.
If you KNOW your editor won't change the EOL bytes (or what it thinks are eol bytes), and you DO NOT change the length of the text entry's object as a whole, you're okay.
For example:
1 0 obj
<</Type/Annotation/Subtype/Widget/V(PlaceHolder Value)/T(Field Title)...>>
endobj
If your new value is longer than "placeholder value", you're screwed.
Most PDFs contain quite a bit of compressed binary data. Some of that data WILL be misinterpreted as EOL characters. Changing them will:
a: break your compressed stream
b: possibly change the byte offsets of the rest of the PDF.
When I hack on PDF files, I always use a hex editor.
Bottom Line: Don't mess with PDFs as a text stream. Mess with them as PDF files, using a PDF library. There's sure to be one capable of altering form field values in your language of choice.
You can also look into FDF and XFDF to see if they'll suit you better. Both file formats store field/value pairs and a reference to the form to use with those pairs. FDF uses PDF's syntax, while XFDF is an XML grammar. You can serve the [X]FDF to your end user and they will see the filled-in form.
WARNING: Unless the form is Reader Enabled (requires Acrobat (pro?)), they won't be able to save the version of the form they get after opening the [X]FDF, only view/print it. Of course they can save the [X]FDF, but many users might balk at this Strange New Format.
I am writing a Master's thesis - NLP system. I have one component - extractor.
It is extracting a plain text from PDF files. There are a few PDF files that can not be extracted correctly. Extractor (PDFBox library) returns a string like this:
"┤xDn║if|d├gDF"Ti&cD╬lh d FÁhis~n ╗xd f«"d┤ffih »h"
or
"10a61a91a22a25a3a27a17a23a20a8a13a14a61a25a17"
I was checking each file that makes this extraction's problem and all these files' text also can not be copy-pasted from PDF Reader (Adobe Reader and FoxIt reader). Viewing them in this readers is enabled, but after selecting its content and copying to the clipboard I get the same wrong text (as described above - strings of not semantically correct chars or strings of digits and letters).
Could anybody help me???
Very often in such cases, where you can't select, copy'n'paste text from the Acrobat (Reader) window, there is another option which may work nevertheless:
Open 'File' menu,
select 'Save as...',
select 'Text (normal) (*.txt)',
browse to the target directory,
type the name you want to use for the text file.
You'll have all text from all pages in the file and need to locate the spot you wanted to copy'n'paste initially -- insofar it is not as comfortable as direct copy'n'paste. But it works more reliably....
It also works with acroread on Linux (but you have to choose 'Save as text...' from the file menu).
Update
You can use the pdffonts command line utility to get a quick-shot analysis of the fonts used by a PDF.
Here is an example output, which demonstrates where a problem for text extraction will very likely occur. It uses one of these hand-coded PDF files from a GitHub-Repository which was created to provide PDF sample files which are well commented and may easily be opened in a text editor:
$ pdffonts textextract-bad2.pdf
name type encoding emb sub uni object ID
------------------------------- ------------ ----------- --- --- --- ---------
BAAAAA+Helvetica TrueType WinAnsi yes yes yes 12 0
CAAAAA+Helvetica-Bold TrueType WinAnsi yes yes no 13 0
How to interpret this table?
The above PDF file uses two subsetted fonts (as indicated by the BAAAAA+ and CAAAAA+ prefixes to their names, as well as by the yes entries in the sub column), Helvetica and Helvtica-Bold.
Both fonts are of type TrueType.
Both fonts use a WinAnsi encoding (a font encoding maps char identifiers used in the PDF source code to glyphs that should be drawn).
However, only for font /Helvetica there is a /ToUnicode table available inside the PDF (for /Helvetica-Bold there is none), as indicated by the yes/no in the uni-column).
The /ToUnicode table is required to provide a reverse mapping from character identifiers/codes to characters.
A missing /ToUnicode table for a specific font is almost always a sure indicator that text strings using this font cannot be extracted or copied'n'pasted from the PDF. (Even if a /ToUnicode table is there, text extraction may still pose a problem, because this table may be damaged, incorrect or incomplete -- as seen in many real-world PDF files, and as also demonstrated by a few companion files in the above linked GitHub repository.)
If are able to successfully select and copy the text in Adobe Reader -- indicated that the PDF does contain text objects -- but you can't paste the copied text into Notepad without it looking like a bunch of garbage characters, then the problem is probably related to the CMap that the selected text uses.
The PDF specification provides many options for the display of textual content and the related extraction of the text content. A CMap specifies the mapping from character codes to character selectors. The PDF spec outlines some predefined CMaps, but other CMaps can also be embedded.
My guess is that either the CMap for this text is corrupt or that the PDFBox library doesn't support this particular CMap. I suggest trying a different SDK just to see if you get any different results.
When opened as a Gmail attachment in Chrome (the internal PDF browser) copying does copy normal readable characters!
It worked for me when I had this problem and for others as well. I think the Chrome PDF viewer uses the Google Drive OCR automatically... It's like magic!
What was the PDF created with. Some PDFs do not contain any encoding information, just the data to draw it. So there is no way to extract the data.
Select the text you wish to copy.
Right click
Choose option "Export Selection as"
In the dialog box, choose a file name and save the new file as Rich Text Format (RTF)
Open RTF to see your text!
The best way to deal with this is Convert PDF file to Word by using this website.
https://www.ilovepdf.com/pdf_to_word
The garbage issue will be fixed
The best way to deal with this is (assuming you have Adobe Acrobat, or something similar, not sure if Reader can do this) is save the doc as a JPEG. Then recompile all the images as a single pdf, then use the OCR function to find text in the pages, then you can copy and paste the text.
PDF is not a text document. It's more of a vector graphic format that sometimes can contain text. So there are some documents from which you can't extract text unless you are willing to do OCR. That's just the way it is.