I have a table hockey game for iphone and now i'm doing the multiplayer part of it. I decided that the iphone that starts the match is the server.
The physics are running on the server and on the client, so the client look keeps smooth e not 'jumpy', since its a really fast game.
The server sends constant messages to the client, so the client can adjust its position and velocity. The problem is that sometimes the client jumps back on position because of the delay.
I've done clock sync on the client and the server, so i can compensate the X and Y position, through the clock difference and the velocity the server sended. The problem is that its looks kind of jumpy. How can i synchronize this thing? I've been trying all sort of stuff but it doesn't seen to work.
Thank you.
You're describing a well-known problem with client/server game state synchronization. Quoting this article:
The most complicated part of client side prediction is handling the
correction from the server. This is difficult, because the corrections
from the server arrive in the past due to client/server communication
latency. We need to apply this correction in the past, then calculate
the resulting corrected position at present time on the client.
Have a look at that article, particularly the section titled "Client side prediction".
Related
We're experimenting with a Freeswitch based multiparty video conferencing solution (Zoom like). The users are connecting via WebRTC (Verto clients) and the streams are all muxed and displayed on the canvas (mod_conference in mux mode). It works OK, but we notice high media latency for mixed output and this makes it very difficult to have a real-time dialogue. This is not load related, even with only 1 caller watching himself on the canvas (the mux conference output), it takes almost 1 second to see a local move being reflected on the screen (e.g. if I raise my hand I can see it happening on the screen after almost 1 second ). This is obviously the roundtrip delay, but after discarding the intrinsic network latency (measured to be about 100 ms roundtrip) there seem to be around 800-900 ms added latency. There's no TURN relaying involved. It seems this is being introduced along the buffering/ transcoding/ muxing pipeline. Any suggestions please what to try to reduce the latency? What sort of latency should we expect, what's your experience, has anyone deployed a Freeswitch video conferencing with acceptable latency for bidirectional, real time conversations? Ultimately I'm trying to understand if Freeswitch can be used for a multiparty real time video conversation or I should give up look for something else. Thanks!
We are currently using ExoPlayer for one of our applications, which is very similar to the HQ Trivia app, and we use HLS as the streaming protocol.
Due to the nature of the game, we are trying to keep all the viewers of this stream to have the same latency, basically to keep them in sync.
We noticed that with the current backend configuration the latency is somewhere between 6 and 10 seconds. Based on this fact, we assumed that it would be safe to “force” the player to play at a bigger delay (15 seconds, further off the live edge), this way achieving the same (constant) delay across all the devices.
We’re using EXT-X-PROGRAM-DATE-TIME tag to get the server time of the currently playing content and we also have a master clock with the current time (NTP). We’re constantly comparing the 2 clocks to check the current latency. We’re pausing the player until it reaches the desired delay, then we’re resuming the playback.
The problem with this solution is that the latency might get worse (accumulating delay) over time and we don’t have other choice than restarting the playback and redo the steps described above if the delay gets too big (steps over a specified threshold). Before restarting the player we’re also trying to slightly increase the playback speed until it reaches the specified delay.
The exoPlayer instance is setup with a DefaultLoadControl, DefaultRenderersFactory, DefaultTrackSelector and the media source uses a DefaultDataSourceFactory.
The server-side configuration is as follows:
cupertinoChunkDurationTarget: 2000 (default: 10000)
cupertinoMaxChunkCount: 31 (default: 10)
cupertinoPlaylistChunkCount: 15 (default: 3)
My first question would be if this is even achievable with a protocol like HLS? Why is the player drifting away accumulating more and more delay?
Is there a better setup for the exoPlayer instance considering our specific use case?
Is there a better way to achieve a constant playback delay across all the playing devices? How important are the parameters on the server side in trying to achieve such a behaviour?
I would really appreciate any kind of help because I have reached a dead-end. :)
Thanks!
The only sollution for this is provided by:
https://netinsight.net/product/sye/
Their sollution includes frame accurate sync with no drift and stateful ABR. This probably can’t be done with http based protocols hence their sollution is built upon UDP transport.
Im trying to communicate with 2 xmpp clients but this is not like messaging or chatting. It's more like event caused at one end and action performed at other (realtime). I wish there will not be any latency time when a Client A is trying to send packets to Client B. If available will there be any possible way to minimalize that it should be un noticed.? Is it possible to do this or by any other means?
First of all, that is still messaging.
As for you latency, there will always be some latency when sending data between processes. You haven't said what tolerance levels you are looking for as opposed to what you are getting so it is hard to say what you should do to improve them.
The biggest factors to any current latency you have will be message size and network speed. Of course direct point to point communication would remove one hop for you message, but without knowing your application there is no way of saying whether this is an acceptable direction.
A small message should be delivered in a few milliseconds on a fast network. If it is a slow network, then your problems lie outside of any communications protocol.
We have developed an application on Windows.net mobile framework and it is used on a Windows 6.5 Smartphone. for our location based application. Our application is real time and tracks our employees. We are finding that the device loses its GPS signal.
Has anyone managed to restart the GPS receiver so that it starts giving the GPS signal again. I would be ever so gratefull if someone can help. We are using GeoFramework2.0 to deliver the geographic information that you need.
Regards
Sandy
The GPS is "shut down" when no application is using it. Just close your handles and re-open them.
If the GPS on your device is part of the WWAN radio (i.e. cellular phone) it may get put in to a low power state rather than being actually shut off. In that case, you can try restarting the radio.
If that doesn't work, some GPS's will allow you to send proprietary commands to them to force a reset or clear the memory. These commands are not standard and will differ significantly by manufacturer. If you have a SiRF GPS, take a look at the SiRF Binary Protocol Reference.
I'm trying to create an embedded outdoor display of bus arrival times at my university. I'd like the device to utilize my school's secured WiFi network to show arrival time updates determined from a server script I have running.
I was hoping to get some advice on the high-level operation of this thing -- would it be better for the display board to poll a hosted database via the WiFi network or should I have a script try to communicate with the board directly over 802.11? (Push or Pull?)
I was planning to use a Wifly or WIZnet ethernet board in combination with a wireless access hub. Mostly inspired by this project: http://www.circuitcellar.com/Wiznet/winners/001166.html Would anyone recommend something else over one of the WIZnet boards? I saw SPI/UART options and thought these boards could work with an AVR platform.
And out of curiosity -- if you were to 'cold start' this device (ie, request a bus arrival time by pushing the display's on button) you might expect it to take 10-20 seconds to get assigned an IP and successfully connect to the database, does that sound right?
I'd go pull. In fact, I'd have outdoor display make http or https requests of the server. That way the server could tell it how long to show a given set of data before polling for a new one using standard http page expiration.
I think pull would make it easier to have multiple displays, and to test your server as well. I've also got a gut feeling that this would make your display more secure. Someone would have to hack your server to hijack your display.
There's a very cool looking Arduino-targetted product called the WiShield. Seems super easy to use and he provides some source code. It uses SPI for host communication. If you're not interested in going the Arduino route, I'm sure the source code wouldn't be too hard to port to something like avr-gcc. Check it out, might save you some time and headaches for $55. Worth checking out anyway.