A rather technical question, but it's still a valid one. I have an app based rather loosely on the AQGridView project. Does anyone know an efficient method for getting the url's from a cell (objectatindex) and then sending those links one at a time to get a thumbnail of the first pdf page. After that all I would need to do is just set it as the image for the cell. I have taken a look at this and found it unsatisfactory as it is non-void and un-dispatch-able. I've tried calling it in a void method, but it was trying to parse every link at once, and they are very large PDF's.
Nevermind, this project by Raphael Cruzeiro Illustrates it perfectly.
Related
Currently, I have an RSS Feed Reader in a UITableView within a Navigation Control. I would like to click on the links and Open up a formatted page (containing all of the information from the website formatted for the iOS screen). I'm not sure if I should do this using the RSS data and a UITextView? I'm currently attempting to use UITextView in hopes that I can separate the information (title, author, body) without anything looking promising. I want to be able to move around the data and format it to my liking in the actual application itself. I read around and noted that you can include HTML and custom CSS. Would this be the way to go? I'm not quite sure how to tackle this. I want the page that opens up to be entirely scrollable (Like the IGN application or Slashgear application). Many apps for websites utilize this (and I am a bit new to this). How do they go about this? I also want to note, at some point I will like to cache the data so it may load what is already loaded without being connected to the internet. Does anyone have any ideas?
Edit:
Ok, I believe I found the correct path to go down from playing around and a lot of googling (nothing directly says what a decent way of doing this is). My particular way as of now is the route of a UIScrollView in general. Now the part I don't understand is how to divide up the long text into 'pages' for scrolling (and I am using the paging feature. This situation has led me into this question: How To Separate Strings For UIScrollView/UITextView based on the size of the frame
Ok, I believe I found the correct path to go down from playing around and a lot of googling (nothing directly says what a decent way of doing this is). My particular way as of now is the route of a UIScrollView in general. Now the part I don't understand is how to divide up the long text into 'pages' for scrolling (and I am using the paging feature. This situation has led me into this question: How To Separate Strings For UIScrollView/UITextView based on the size of the frame
I've been trying to figure this one out for about a week now and just
can't come up with a good solution. So, I figured I would see if anyone could help me out. Here's one of the links that I'm trying to scrape:
http://content.lib.washington.edu/cdm4/item_viewer.php?CISOROOT=/alaskawcanada&CISOPTR=491&CISOBOX=1&REC=4
I right-clicked to copy image location.
This is the link that is copied:
(Can't paste this as a link because I'm new)
http:// content (dot) lib (dot) washington (dot) edu/cgi-bin/getimage.exe?CISOROOT=/alaskawcanada&CISOPTR=491&DMSCALE=100.00000&DMWIDTH=802&DMHEIGHT=657.890625&DMX=0&DMY=0&DMTEXT=%20NA3050%20%09AWC0644%20AWC0388%20AWC0074%20AWC0575&REC=4&DMTHUMB=0&DMROTATE=0
There is no clear image URL being displayed. Obviously that's
because the image is hidden behind some type of script. Through trial and
error I found that I can put ".jpg" after the "CISOPTR=491" and then the link becomes an Image URL. The problem is that this is not the high-resolution version of the image. To get to the
high-resolution version I have to change the URL even more. I found a lot of articles #Stackoverflow.com to mention trying to build a script using curl and PHP, I have even tried a few of them with no luck. "491" is the image number and I can change that number to find other images in the same directory. So, scraping a sequence of numbers should be pretty easy. But I'm still a noob at scraping and this one is kicking my butt. Here's what I've tried.
Get remote image using cURL then resample
also tried this.
http://psung.blogspot.com/2008/06/using-wget-or-curl-to-download-web.html
I also have Outwit Hub, and Site Sucker, but they don't recognize the URL as an image file and fo they just pass right ove it. I used SiteSucker overnight and it download 40,000 files and only 60 were jpegs, none of which were the ones I wanted.
The other thing I keep running into, is the files I have been able to download manually, the filename is always either getfile.exe or showfile.exe and then if I manually add ".jpg" as the extension I can view the image locally.
How can I reached the original high-res image file, and automate the download process so that I can scrape a couple hundred of these images?
I right-clicked to copy image location. This is the link that is
copied:
You noticed the title has ".exe" in there. Look at the stuff in the query string:
DMSCALE=100.00000
DMWIDTH=802
DMHEIGHT=657.890625
DMX=0
DMY=0
DMTEXT=%20NA3050%20%09AWC0644%20AWC0388%20AWC0074%20AWC0575
REC=4
DMTHUMB=0
DMROTATE=0
Strongly implies the original source of this image is in a database or something and it is being passed thru a server-side filter (not sure if that is what you meant by "some kind of script"). Ie, this is dynamically generated content, not static, and the same caveats apply as would to dynamic text content: you have to figure out what instructions to provide the server to get it to cough up what you want. Which you pretty much have in front of you...if SiteSucker or whatever won't deal with it properly, scrape the address yourself using an HTML parser.
I've been programming for a while, but just recently decided to start developing for Mac OS X. I feel like I've come to grips with the basics of Objective-C and Cocoa development over the past week. I'm planning on making graphics apps, and as such am currently in the process of learning how to control Quartz compositions through a Cocoa app. I went through the tutorial that apple offers (with the Mac Engravings composition), and was able to create that just fine. In order to make sure that I truly understood what I learned, I decided to create my own composition and link it to a slightly more complicated Cocoa application.
Essentially, I have a composition that loads a movie or image through a Movie Loader patch, at which point it applies various filters to the frames before outputting it. In my Cocoa app, I've written code (or rather copied and pasted from other apple examples) that lets a user pick a file using an NSOpenPanel object. The filepath of the file they pick gets placed in a text-box that I placed in the app's window using Interface Builder. I binded the value of said text-box to the "Movie_Location" key in my composition, which is a published input in the Movie Loader patch that I'm using. However, no matter what I do, movies and images aren't loaded into this composition no matter what I try. The only thing that gets displayed is the default image that I have saved in that input from Quartz Composer (or nothing if I leave it blank before publishing).
I've added a Clear Color patch to the composition and binded that to a colorwell in my UI, and that successfully changes the color in my display, so I know that the composition and my Cocoa app are communicating. I've spent numerous hours at this point trying to figure out what's going on, and I've just about given up. Does the Movie Loader have any weird behaviors that I'm not aware of, or is there something obvious that I seem to be missing? I'd really appreciate any help or advice from anybody.
Thanks for reading through this...
Best,
Sami
There are two things I can think of as reasons why it is doing this:
The file path isn't formatted incorrectly. Try checking backslashes, colons, etc.
The box isn't updating the value. Try literally clicking in the text field and hitting enter.
That's all I can think of without seeing your quartz composition and/or code.
EDIT:
Check the other continuous box, in the general properties.
I figured this out yesterday. spudwaffle's second idea is what was going on. If I were to type a filepath in and hit enter, it would work just fine. I got this to work properly by just removing the bind and instead using the setValue:keyInPath: function that a patch controller offers. That said, is there some way to force a text-box to update? I remember seeing a "continuously update" or something like that button within the bind sub-menu in the inspector, but my code didn't work with that checked either.
Thanks to those of you that tried to help me! I really appreciate it.
Best,
Sami
I'm using Quartz 2D to render PDF on the iPad, this works fine.
Now I need a way to get the document outline (table of content), I found the following function CGPDFDocumentGetCatalog which seems to be relevant, but the returned info is an opaque dictionary from which I don't know the keys.
I want the outline in a tree with the page number for each entry.
I'm interested in any answer I can use on the iPad, even if it use an other library.
https://github.com/below/PDF-Voyeur
I am developing an iPhone application where i want to display three image in each row on scroll view where i need to click action on each image like Photo album in iPhone. I am not getting any sample code.
Hoping for help
subodh
There's plenty of sample code out there, I found this after only basic googling. You want to search for "UIImageView Iphone". It's also worth mentioning that Apple's very own Developer Center is extremely well written, and will teach you everything you need to know about iPhone programming.
Generally it is frowned down upon to say to look more or read documentation, but you really haven't looked at all. Especially because of Apple's own resource that tells you how to do almost anything, especially something like this. It's not something you can pick up and bits and pieces of and expect to be successful with, it really should be learned starting from the beginning and moving forward. This is especially true if you've never programmed before or are unfamiliar with C/Objective-C.
Three20 has a photo browser that is open source and works similarly to the iPhone's photo browser with some nice code examples. The images come from an image source object that can relate them to images in your apps bundle or images on the web. Looks like its Google group is here. I think that to use images in your bundle you use a URL formed like: bundle://image-name.png and not the typical use of the main bundle to get a path to resource.