I am using the code below and am trying everything to color the resulting circle that it draws, but cannot for the life of me figure it out! Can anyone help? How do I color the circle in that my method draws?
What I have so far is this:
-(void)drawCircleAtPoint:(CGPoint)p withRadius:(CGFloat)radius inContext:(CGContextRef)context
{
UIGraphicsPushContext(context);
CGContextBeginPath(context);
CGContextAddArc(context, p.x, p.y, radius, 0, 2*M_PI, YES);
CGContextStrokePath(context);
UIGraphicsPopContext();
}
- (void)drawRect:(CGRect)rect
{
CGPoint midPoint;
midPoint.x = self.bounds.origin.x + self.bounds.size.width/2;
midPoint.y = self.bounds.origin.y + self.bounds.size.width/2;
CGFloat size = self.bounds.size.width/2;
if (self.bounds.size.height < self.bounds.size.width) size = self.bounds.size.height/2;
size *= 0.90;
CGContextRef context = UIGraphicsGetCurrentContext();
CGContextSetLineWidth(context, 10.0);
[[UIColor blackColor] setStroke];
CGColorRef color = [[UIColor redColor] CGColor];
CGContextSetFillColorWithColor(context, color);
CGContextFillPath(context);
[self drawCircleAtPoint:midPoint withRadius:size inContext:context];
}
You're trying to fill the current path, but you haven't added anything to it yet. The only point at which you add anything to the current path is in drawCircleAtPoint:withRadius:inContext:, after which you only stroke it.
Move your CGContextFillPath call into that method. You'll want to fill before you stroke, since the stroke will reset the current path. (If you want to fill on top of the inside of the stroke, you'll need to save the gstate before stroking and restore it after, so that the current path is still set when you fill.)
Related
Here is a picture of two lines drawn in a UITableViewCell with the same function, and same width, and color
As you can see the bottom line is a lot thicker than the other line.
The code I am using for drawing:
[CSDrawing drawLineWithColor:[UIColor blackColor] width:1.0 yPosition:1.0 rect:rect];
[CSDrawing drawLineWithColor:[UIColor blackColor] width:1.0 yPosition:CGRectGetMaxY(rect) - 3.0 rect:rect]; // draw a line on top and bottom
+(void)drawLineWithColor:(UIColor *)color width:(CGFloat)width yPosition:(CGFloat)yPosition rect:(CGRect)rect {
CGContextRef context = UIGraphicsGetCurrentContext();
CGContextSaveGState(context);
CGContextMoveToPoint(context, 0.0, yPosition);
CGContextAddLineToPoint(context, CGRectGetMaxX(rect), yPosition);
CGContextSetStrokeColorWithColor(context, color.CGColor);
CGContextSetLineWidth(context, width);
CGContextStrokePath(context);
CGContextRestoreGState(context);
}
The problem was with the backgroundView being stretched to fit the content of the cell when the cell was being reused. When the cell was bigger the pixels were stretched. This is solved be setting the contentMode property to UIViewContentModeRedraw
I am currently working on drawing app, in which have a slider to increase and decrease line width. I just want to do a simple thing that a circle in front of slider to present a width. I easily did that but its not growing and shrinking from centre, its growing and shrinking from top x, y, here is the code
- (UIImage *)circleOnImage:(int)size
{
UIGraphicsBeginImageContext(CGSizeMake(25, 25));
CGContextRef ctx = UIGraphicsGetCurrentContext();
[[UIColor blackColor] setFill];
CGContextTranslateCTM(ctx, 12, 12);//also try to change the coordinate but didn't work
CGRect circleRect = CGRectMake(0, 0, size, size);
CGContextFillEllipseInRect(ctx, circleRect);
UIImage *retImage = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
return retImage;
}
Try
CGContextTranslateCTM(ctx, 12.5, 12.5);
CGRect circleRect = CGRectMake(-size/2., -size/2., size, size);
I need to fill my UIView in drawRect() method with 'reverted polygon' - everything in view is filled with some color except polygon itself.
I've got this code to draw a simple polygon:
CGContextBeginPath(context);
for(int i = 0; i < corners.count; ++i)
{
CGPoint cur = [self cornerAt:i], next = [self cornerAt:(i + 1) % corners.count];
if(i == 0)
CGContextMoveToPoint(context, cur.x, cur.y);
CGContextAddLineToPoint(context, next.x, next.y);
}
CGContextClosePath(context);
CGContextFillPath(context);
I found a similar question, but in C#, not Obj-C : c# fill everything but GraphicsPath
Probably the fastest way is to set a clip:
// create your path as posted
// but don't fill it (remove the last line)
CGContextAddRect(context, self.bounds);
CGContextEOClip(context);
CGContextSetRGBFillColor(context, 1, 1, 0, 1);
CGContextFillRect(context, self.bounds);
Both the other answers suggest to first fill a rect, then draw the shape with clear color on top. Both omit the necessary blend mode. Here's a working version:
CGContextSetRGBFillColor(context, 1, 1, 0, 1);
CGContextFillRect(context, self.bounds);
CGContextSetBlendMode(context, kCGBlendModeClear);
// create and fill your path as posted
Edit: Both approaches require the backgroundColor to be the clearColor and opaque to be set to NO.
Second Edit: The original question was about Core Graphics. Of course there are other ways of masking part of a view. Most notably CALayer's mask property.
You can set this property to an instance of a CAPathLayer that contains your clip path to create a stencil effect.
in drawRect u can set the background color of ur view with the color u want
self.backgroundColor = [UIcolor redColor]; //set ur color
and then draw a polygon the way u r doing.
CGContextBeginPath(context);
for(int i = 0; i < corners.count; ++i)
{
CGPoint cur = [self cornerAt:i], next = [self cornerAt:(i + 1) % corners.count];
if(i == 0)
CGContextMoveToPoint(context, cur.x, cur.y);
CGContextAddLineToPoint(context, next.x, next.y);
}
CGContextClosePath(context);
CGContextFillPath(context);
hope it helps.. happy coding :)
Create a new CGLayer, fill it with your outside color, then draw your polygon using a clear color.
layer1 = CGLayerCreateWithContext(context, self.bounds.size, NULL);
context1 = CGLayerGetContext(layer1);
[... fill entire layer ...]
CGContextSetFillColorWithColor(self.context1, [[UIColor clearColor] CGColor]);
[... draw your polygon ...]
CGContextRef context = UIGraphicsGetCurrentContext();
CGContextDrawLayerAtPoint(context, CGPointZero, layer1);
Is there any way to draw an NSImage like images in NSButtons or other cocoa interface elements?
Here are examples:
Apple uses pdf's with black icons:
If you simply want this effect to be applied when you use your own images in a button, use [myImage setTemplate:YES]. There is no built-in way to draw images with this effect outside of a button that has the style shown in your screenshots.
You can however replicate the effect using Core Graphics. If you look closely, the effect consists of a horizontal gradient, a white drop shadow and a dark inner shadow (the latter is the most difficult).
You could implement this as a category on NSImage:
//NSImage+EtchedDrawing.h:
#interface NSImage (EtchedImageDrawing)
- (void)drawEtchedInRect:(NSRect)rect;
#end
//NSImage+EtchedDrawing.m:
#implementation NSImage (EtchedImageDrawing)
- (void)drawEtchedInRect:(NSRect)rect
{
NSSize size = rect.size;
CGFloat dropShadowOffsetY = size.width <= 64.0 ? -1.0 : -2.0;
CGFloat innerShadowBlurRadius = size.width <= 32.0 ? 1.0 : 4.0;
CGContextRef c = [[NSGraphicsContext currentContext] graphicsPort];
//save the current graphics state
CGContextSaveGState(c);
//Create mask image:
NSRect maskRect = rect;
CGImageRef maskImage = [self CGImageForProposedRect:&maskRect context:[NSGraphicsContext currentContext] hints:nil];
//Draw image and white drop shadow:
CGContextSetShadowWithColor(c, CGSizeMake(0, dropShadowOffsetY), 0, CGColorGetConstantColor(kCGColorWhite));
[self drawInRect:maskRect fromRect:NSMakeRect(0, 0, self.size.width, self.size.height) operation:NSCompositeSourceOver fraction:1.0];
//Clip drawing to mask:
CGContextClipToMask(c, NSRectToCGRect(maskRect), maskImage);
//Draw gradient:
NSGradient *gradient = [[[NSGradient alloc] initWithStartingColor:[NSColor colorWithDeviceWhite:0.5 alpha:1.0]
endingColor:[NSColor colorWithDeviceWhite:0.25 alpha:1.0]] autorelease];
[gradient drawInRect:maskRect angle:90.0];
CGContextSetShadowWithColor(c, CGSizeMake(0, -1), innerShadowBlurRadius, CGColorGetConstantColor(kCGColorBlack));
//Draw inner shadow with inverted mask:
CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB();
CGContextRef maskContext = CGBitmapContextCreate(NULL, CGImageGetWidth(maskImage), CGImageGetHeight(maskImage), 8, CGImageGetWidth(maskImage) * 4, colorSpace, kCGImageAlphaPremultipliedLast);
CGColorSpaceRelease(colorSpace);
CGContextSetBlendMode(maskContext, kCGBlendModeXOR);
CGContextDrawImage(maskContext, maskRect, maskImage);
CGContextSetRGBFillColor(maskContext, 1.0, 1.0, 1.0, 1.0);
CGContextFillRect(maskContext, maskRect);
CGImageRef invertedMaskImage = CGBitmapContextCreateImage(maskContext);
CGContextDrawImage(c, maskRect, invertedMaskImage);
CGImageRelease(invertedMaskImage);
CGContextRelease(maskContext);
//restore the graphics state
CGContextRestoreGState(c);
}
#end
Example usage in a view:
- (void)drawRect:(NSRect)dirtyRect
{
[[NSColor colorWithDeviceWhite:0.8 alpha:1.0] set];
NSRectFill(self.bounds);
NSImage *image = [NSImage imageNamed:#"MyIcon.pdf"];
[image drawEtchedInRect:self.bounds];
}
This would give you the following result (shown in different sizes):
You may need to experiment a bit with the gradient colors and offset/blur radius of the two shadows to get closer to the original effect.
If you don't mind calling a private API, you can let the operating system (CoreUI) do the shading for you. You need a few declarations:
typedef CFTypeRef CUIRendererRef;
extern void CUIDraw(CUIRendererRef renderer, CGRect frame, CGContextRef context, CFDictionaryRef object, CFDictionaryRef *result);
#interface NSWindow(CoreUIRendererPrivate)
+ (CUIRendererRef)coreUIRenderer;
#end
And for the actual drawing:
CGRect drawRect = CGRectMake(x, y, width, height);
CGImageRef cgimage = your_image;
CFDictionaryRef dict = (CFDictionaryRef) [NSDictionary dictionaryWithObjectsAndKeys:
#"backgroundTypeRaised", #"backgroundTypeKey",
[NSNumber numberWithBool:YES], #"imageIsGrayscaleKey",
cgimage, #"imageReferenceKey",
#"normal", #"state",
#"image", #"widget",
[NSNumber numberWithBool:YES], #"is.flipped",
nil];
CUIDraw ([NSWindow coreUIRenderer], drawRect, cg, dict, nil);
CGImageRelease (cgimage);
This will take the alpha channel of cgimage and apply the embossing effect as seen on toolbar buttons. You may or may not need the "is.flipped" line. Remove it if your result is upside-down.
There are a bunch of variations:
kCUIPresentationStateKey = kCUIPresentationStateInactive: The window is not active, the image will be lighter.
state = rollover: Only makes sense with the previous option. This means you are hovering over the image, the window is inactive, but the button is sensitive (click-through is enabled). It will become darker.
state = pressed: Occurs when the button is pressed. The icon gets slightly darker.
Bonus tip: To find out stuff like this, you can use the SIMBL plugin CUITrace. It prints out all the CoreUI invocations of a target app. This is a treasure trove if you have to draw your own native-looking UI.
Here's a much simpler solution: just create a cell and let it draw. No mucking around with private APIs or Core Graphics.
Code could look similar to the following:
NSButtonCell *buttonCell = [[NSButtonCell alloc] initImageCell:image];
buttonCell.bordered = YES;
buttonCell.bezelStyle = NSTexturedRoundedBezelStyle;
// additional configuration
[buttonCell drawInteriorWithFrame: someRect inView:self];
You can use different cells and configurations depending on the look you want to have (eg. NSImageCell with NSBackgroundStyleDark if you want the inverted look in a selected table view row)
And as a bonus, it will automatically look correct on all versions of OS X.
To get to draw correctly within any rect, the CGContextDrawImage and CGContextFillRect for the inner mask must have the origin of (0,0). then when you draw the image for the inner shadow you can then reuse the mask rect. So ends up looking like:
CGRect cgRect = CGRectMake( 0, 0, maskRect.size.width, maskRect.size.height );
CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB();
CGContextRef maskContext = CGBitmapContextCreate( NULL, CGImageGetWidth( maskImage ), CGImageGetHeight( maskImage ), 8, CGImageGetWidth( maskImage ) * 4, colorSpace, kCGImageAlphaPremultipliedLast );
CGColorSpaceRelease( colorSpace );
CGContextSetBlendMode( maskContext , kCGBlendModeXOR );
CGContextDrawImage( maskContext, cgRect, maskImage );
CGContextSetRGBFillColor( maskContext, 1.0, 1.0, 1.0, 1.0 );
CGContextFillRect( maskContext, cgRect );
CGImageRef invertedMaskImage = CGBitmapContextCreateImage( maskContext );
CGContextDrawImage( context, maskRect, invertedMaskImage );
CGImageRelease( invertedMaskImage );
CGContextRelease( maskContext );
CGContextRestoreGState( context );
You also have to leave a 1px border around the outside of the image or the shadows won't work correctly.
In one of my methods i have this code:
-(void)myMethod {
UIBezierPath *circle = [UIBezierPath
bezierPathWithOvalInRect:CGRectMake(75, 100, 200, 200)];
}
How do i get it to show on the view?
I tried addSubview but it gave me an incompatible type error because its expecting a UIView.
I'm sure this must be simple.
Thanks
Just thought I'd add that you don't have to necessarily draw this in a UIView's "drawRect:" method. You can draw it anywhere you'd like to provided you do it inside of a UIGraphics image context. I do this all of the time when I don't want to create a subclass of UIView. Here's a working example:
UIBezierPath *circle = [UIBezierPath
bezierPathWithOvalInRect:CGRectMake(75, 100, 200, 200)];
//you have to account for the x and y values of your UIBezierPath rect
//add the x to the width (75 + 200)
//add the y to the height (100 + 200)
UIGraphicsBeginImageContext(CGSizeMake(275, 300));
//this gets the graphic context
CGContextRef context = UIGraphicsGetCurrentContext();
//you can stroke and/or fill
CGContextSetStrokeColorWithColor(context, [UIColor blueColor].CGColor);
CGContextSetFillColorWithColor(context, [UIColor lightGrayColor].CGColor);
[circle fill];
[circle stroke];
//now get the image from the context
UIImage *bezierImage = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
UIImageView *bezierImageView = [[UIImageView alloc]initWithImage:bezierImage];
Now just add the UIImageView as a subview.
Also, you can use this for other drawing too. Again, after a little bit of setup, it works just like the drawRect: method.
//this is an arbitrary size for example
CGSize aSize = CGSizeMake(50.f, 50.f);
//this can take any CGSize
//it works like the frame.size would in the drawRect: method
//in the way that it represents the context's size
UIGraphicsBeginImageContext(aSize);
//this gets the graphic context
CGContextRef context = UIGraphicsGetCurrentContext();
//you can do drawing just like you would in the drawRect: method
//I am drawing a square just for an example to show you that you can do any sort of drawing in here
CGContextMoveToPoint(context, 0.f, 0.f);
CGContextAddLineToPoint(context, aSize.width, 0.f);
CGContextAddLineToPoint(context, aSize.width, aSize.height);
CGContextAddLineToPoint(context, 0.f, aSize.height);
CGContextClosePath(context);
//you can stroke and/or fill
CGContextSetStrokeColorWithColor(context, [UIColor blueColor].CGColor);
CGContextSetFillColorWithColor(context, [UIColor lightGrayColor].CGColor);
CGContextDrawPath(context, kCGPathFillStroke);
//now get the image from the context
UIImage *squareImage = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
UIImageView *squareImageView = [[UIImageView alloc]initWithImage:squareImage];
Edit: One thing I should add is that for any modern day drawing of this kind, you should be swapping out
UIGraphicsBeginImageContext(size);
for
UIGraphicsBeginImageContextWithOptions(size, opaque, scale);
This will draw your graphics correctly for retina and non retina displays.
FYI, UIGraphicsBeginImageContext(size) is equivalent to UIGraphicsBeginImageContextWithOptions(size, FALSE, 1.f) which is fine for none retina displays that may have some transparency.
However, if you don't need transparency, it is more optimized to pass in TRUE for the opaque argument.
The safest and recommended way of drawing is to pass in [[UIScreen mainScreen]scale] as the scale argument.
So for the example(s) above, you would use this instead:
UIGraphicsBeginImageContextWithOptions(aSize, FALSE, [[UIScreen mainScreen] scale]);
For more info, check out Apple's docs.
You can draw it using either fill or stroke methods for example in custom view's drawInRect: implementation:
- (void)drawRect:(CGRect)rect {
// Drawing code
UIBezierPath *circle = [UIBezierPath
bezierPathWithOvalInRect:CGRectMake(75, 100, 200, 200)];
[circle fill];
}
You can also add UIBezierPath to UIView without subclassing by using a CAShapeLayer.
For example, to add your path as a 3pt white line centered in a UIView:
UIBezierPath *mybezierpath = [UIBezierPath
bezierPathWithOvalInRect:CGRectMake(0, 0, 100, 100)];
CAShapeLayer *lines = [CAShapeLayer layer];
lines.path = mybezierpath.CGPath;
lines.bounds = CGPathGetBoundingBox(lines.path);
lines.strokeColor = [UIColor whiteColor].CGColor;
lines.fillColor = [UIColor clearColor].CGColor; /*if you just want lines*/
lines.lineWidth = 3;
lines.position = CGPointMake(self.myview.frame.size.width/2.0, self.myview.frame.size.height/2.0);
lines.anchorPoint = CGPointMake(.5, .5);
[self.myview.layer addSublayer:lines];
Drawing is the exclusive provision of views. Make a custom view, give it your path, and implement the view's drawRect: method to fill and/or stroke the path.
In Swift 2.0:
let path = UIBezierPath()
let p1 = CGPointMake(0,self.view.frame.height/2)
let p3 = CGPointMake(self.view.frame.width,self.view.frame.height/2)
path.moveToPoint(p1)
path.addQuadCurveToPoint(p3, controlPoint: CGPoint(x: self.view.frame.width/2, y: 0))
let line = CAShapeLayer()
line.path = path.CGPath;
line.strokeColor = UIColor.blackColor().CGColor
line.fillColor = UIColor.redColor().CGColor
view.layer.addSublayer(line)