ExtJs 4 : Tree grid panel filter - extjs4

I am using ExtJs 4 with a Tree panel on west region and TreeGrid panel on center region. Is there any way to filter the TreeGrid panel(center region) on selection of the treepanel(west) ??
I tried the following but no luck :
Ext.define('MyApp.view.MyViewport', {
extend: 'MyApp.view.ui.MyViewport',
initComponent: function() {
var me = this;
me.callParent(arguments);
me.down('#westTreePanel').getSelectionModel().on('selectionchange',me.CenterTreeFilter,me);
}, //end of initComponent
CenterTreeFilter: function(){
var selection = this.down('#westTreePanel').getView().getSelectionModel().getSelection()[0];
var centerTreeGrid = this.down('#centerTreeGrid');
console.log(selection.data.text);
centerTreeGrid.store.filterBy(function(rec, id){
console.log(rec);
return (rec.store("text") == selection.data.text);
});
console.log("sub store : " + this.down('#centerTreeGrid').getStore().storeId);
}
});

After days of fighting with this issue, I was finally able to get the functionality, albeit in a not so satisfying way. Also, only leaf nodes are currently hidden.
filtering all nodes that don't mention "text":
t.getRootNode().cascadeBy(function(n){
if (!n.hasChildNodes() &&
n.raw && n.raw.text.toLowerCase().indexOf(text.toLowerCase()) < 0) {
toRemove.push({ node: n, parent: n.parentNode });
}
});
To restore later, run:
function restoreTrees() {
for (var n in toRemove) {
toRemove[n].parent.appendChild(toRemove[n].node);
}
toRemove = [];
}
There are many flaws with this solution. Including that the restored tree will probably have a different ordering for their nodes. But hey, at least this is some progress.
Would love to see a better one! (Had it working beautifully in Ext JS 3, but now these darn nodes don't have a .ui.hide() function any more).

i've checked their example http://dev.sencha.com/deploy/ext-4.0.2a/examples/tree/treegrid.html, in fact the issue here is that the store for the treeGrid is a tree store which doesn;t have the method filterBy , the method filterBy is defined in ext.data.store and treeStore extends ext.data.abstractStore.. as i see it you have to apply your filters diferently, using the the filters config for the treeStore. You can define your filter and set the filterOnLoad on true and instead of calling the filterBy method do centerTreeGrid.store.fireEvent('load',selection). I hope this helps you
Edit
I haven't used filters for tree stores but i think you can do something like this
var treeFilter = new Ext.util.Filter({
filterFn: function(rec) {
console.log(rec);
return (rec.store("text") == selection.data.text);
});
And assign the filter to the treeStore in the initComponent
centerGrid.store.filters.add(treeFilter);
centerGrid.store.filterOnLoad = true;
And in the CenterTreeFilter function
centerGrid.store.fireEvent('load',selection);
P.s the code is untested and probably it will need some modifications, but i think this is the way to do it.

Related

How to prevent closing of cell edit mode on validation errors with custom vue components in ag-grid

I have succesfully rendered my own component as the cellEditor and would like and on-leave I would like it to try to validate the value and prevent the closing if it fails.
If I look at this then https://www.ag-grid.com/javascript-grid-cell-editing/#editing-api there's cancelable callback functions for editing. But in this callback function is there a way to access the current instantiated component? I would think that would be the easiest way to handle this.
I'm using vee-validate so the validation function is async, just to keep in mind.
Use Full row editing.
Create a global variable like
var problemRow = -1;
Then Subscribe to this events:
onRowEditingStarted: function (event) {
if (problemRow!=-1 && event.rowIndex!=problemRow) {
gridOptions.api.stopEditing();
gridOptions.api.startEditingCell({
rowIndex: problemRow,
colKey: 'the column you want to focus',
});
}
},
onRowEditingStopped: function (event) {
if (problemRow==-1) {
if (event.data.firstName != "your validation") {
problemRow = event.rowIndex
gridOptions.api.startEditingCell({
rowIndex: problemRow,
colKey: 'the column you want to focus',
});
}
}
if (problemRow == event.rowIndex) {
if (event.data.firstName != "your validation") {
problemRow = event.rowIndex
gridOptions.api.startEditingCell({
rowIndex: problemRow,
colKey: 'the column you want to focus',
});
}
else{
problemRow=-1;
}
}
},
I had a similar issue - albeit in AngularJS and the non-Angular mode for ag-grid - I needed to prevent the navigation when the cell editor didn't pass validation.
The documentation is not very detailed, so in the end I added a custom cell editor with a form wrapped around the input field (to handle the niceties such as red highlighting etc), and then used Angular JS validation. That got me so far, but the crucial part was trying to prevent the user tabbing out or away when the value was invalid so the user could at least fix the issue.
I did this by adding a value parser when adding the cell, and then within that if the value was invalid according to various rules, throw an exception. Not ideal, I know - but it does prevent ag-grid from trying to move away from the cell.
I tried loads of approaches to solving this - using the tabToNextCell events, suppressKeyboardEvent, navigateToNextCell, onCellEditingStopped - to name a few - this was the only thing that got it working correctly.
Here's my value parser, for what it's worth:
var codeParser = function (args) {
var cellEditor = _controller.currentCellEditor.children['codeValue'];
var paycodeId = +args.colDef.field;
var paycodeInfo = _controller.paycodes.filter(function (f) { return f.id === paycodeId; })[0];
// Check against any mask
if (paycodeInfo && paycodeInfo.mask) {
var reg = new RegExp("^" + paycodeInfo.mask + '$');
var match = args.newValue.match(reg);
if (!match) {
$mdToast.show($mdToast.simple().textContent('Invalid value - does not match paycode format.').position('top right').toastClass('errorToast'))
.then(function(r) {
_controller.currentCellEditor.children['codeValue'].focus();
});
throw 'Invalid value - does not match paycode format.';
}
}
return true;
};
The _controller.currentCellEditor value is set during the init of the cell editor component. I do this so I can then refocus the control after the error has been shown in the toast:
CodeValueEditor.prototype.init = function (params) {
var form = document.createElement('form');
form.setAttribute('id', 'mainForm');
form.setAttribute('name', 'mainForm');
var input = document.createElement('input');
input.classList.add('ag-cell-edit-input');
input.classList.add('paycode-editor');
input.setAttribute('name', 'codeValue');
input.setAttribute('id', 'codeValue');
input.tabIndex = "0";
input.value = params.value;
if (params.mask) {
input.setAttribute('data-mask', params.mask);
input.setAttribute('ng-pattern','/^' + params.mask + '$/');
input.setAttribute('ng-class',"{'pattern-error': mainForm.codeValue.$error.pattern}");
input.setAttribute('ng-model', 'ctl.currentValue');
}
form.appendChild(input);
this.container = form;
$compile(this.container)($scope);
_controller.currentValue = null;
// This is crucial - we can then reference the container in
// the parser later on to refocus the control
_controller.currentCellEditor = this.container;
$scope.$digest();
};
And then cleared in the grid options onCellEditingStopped event:
onCellEditingStopped: function (event) {
$scope.$apply(function() {
_controller.currentCellEditor = null;
});
},
I realise it's not specifically for your components (Vue.js) but hopefully it'll help someone else. If anyone has done it a better way, I'm all ears as I don't like throwing the unnecessary exception!

Dynamically Adding / Removing Route in Durandal Router when application is loaded

I need help in dynamically adding/removing route in Durandal Router. What I want is after user is logged in then I would be able to add or remove specific route depending upon logged in user's type.
I tried to add/remove route from visibleRoutes/allRoutes array ... but get binding exception from knockout library...
I was hoping it would be common scenario... but still couldn't find any solution ... please help me in fixing this issue.
Thanks.
Wasim
POST COMMENTS:
I tried this function to dynamically hide/show route... and similary tried to add/remove route from allRoutes[] ... but then get exception on knockout bidning
showHideRoute: function (url,show) {
var routeFounded = false;
var theRoute = null;
$(allRoutes()).each(function (route) {
if (url === this.url) {
routeFounded = true;
var rt = this;
theRoute = rt;
return false;
}
});
if (routeFounded)
{
if (show)
{
visibleRoutes.push(theRoute);
}
else
{
visibleRoutes.remove(theRoute);
}
}
}
In Durandal 2.0.
You can enumerate the routes to find the one you wish to show/hide.
Then change the value of: nav property
Then run buildNavigationModel();
here is an example:
// see if we need to show/hide 'flickr' in the routes
for (var index in router.routes) {
var route = router.routes[index];
if (route.route == 'flickr') {
if (vm.UserDetail().ShowFlickr) { // got from ajax call
// show the route
route.nav = true; // or 1 or 2 or 3 or 4; to have it at a specific order
} else if (route.nav != false) {
route.nav = false;
}
router.buildNavigationModel();
break;
}
}
Durandal 2.0 no longer has the method visibleRoutes. I found that the following works for me.
router.reset();
router.map([
{ route: 'home', moduleId: 'home/index', title: 'Welcome', nav: true },
{ route: 'flickr', moduleId: 'flickr/index', title: '', nav: true }
])
.buildNavigationModel()
.mapUnknownRoutes('home/index', 'not-found');
This removes all previous routes, if you want to maintain current routes you could try using the router.routes property to rebuild the array of routes.
I had a similar requirement. If I were you, I would take another approach. Rather than adding/removing routes when application loads - get the right routes to begin with per user type.
Two options, (I use both)
1) have a json service provide the proper routes per user type, this approach would be good if you need to 'protect/obscure' routes... i.e. I don't want the route referenced on any client resource.
2) A simpler solution see Durandal.js: change navigation options per area
You can have a settings property identify the user type.
I hope this helps.
I had a similar problem: First, router.visibleRoutes() is an observable array. In other words, when you change its value, the routes automatically update. However, the items in this array are not observable, so to make a change you need to replace the entire array and not just make a change to a single item in it.
So, all you have to do is find which item in this array you want to remove, and then create a new array without this item, and set router.visibleRoutes() to this new array.
If, for example, you find out the it is the 3rd item, then one way of doing it is:
router.visibleRoutes(router.visibleRoutes().splice(2, 1))
Note that splice() returns a new array where an item is removed. This new array is put into router.visibleRoutes.

WinJS Listview shows undefined when navigating quickly

I have a WinJS application with listviews in which if quickly navigate between pages before the listview is fully loaded, the next page shows the listview with all elements in it bound as "undefined".
So say I have a hub page with a "to do" that is filtered to only show 6 items, and there is a header that navigates to the full "to do" page, when the hub page is displayed but before it is fully loaded I click on the header link to the "to do" page, the app then goes to the "to do" page, but the items show up with all the properties in the tile as "undefined".
I am using IndexedDB as my data store.
My home page code looks like this:
WinJS.UI.Pages.define("/pages/home/home.html", {
ready: function (element, options) {
WinJS.Utilities.query("a").listen("click", function (e) {
e.preventDefault();
WinJS.Navigation.navigate(e.currentTarget.href);
}, false);
viewModel = new HomeViewModel(element);
viewModel.load(); //loads from indexed db
},
//etc...
To Do Page:
WinJS.UI.Pages.define("/pages/ToDo/ToDo.html", {
ready: function (element, options) {
viewModel = new ToDoViewModel(element);
viewModel.load();
},
etc//
I know there isn't much to go off, but any ideas would be appreciated.
Also tips on how to debug something like this would be great.
Update
I narrowed it down to this one line from the Hub Page:
myLib.GetData(todaysDate, function (result) {
that.trendsModel.today = result;
WinJS.Binding.processAll(that.el.querySelector("#dataPanel"), that.trendsModel); //<--Right Here
});
If I remove that, then when I load the second page the data doesn't show as undefined. What is interesting is the data initially shows correctly on the second page and then it changes to "undefined".
Solution
My fix:
myLib.GetData(todaysDate, function (result) {
var element = that.el.querySelector("#dataPanel");
that.trendsModel.today = result;
if(element) {
WinJS.Binding.processAll(element, that.trendsModel);
}
});
At the point when when the callback returns, I am already on the second page. So the selector was not found returning null. If you pass null to processAll it tries to bind the whole page which is why I was able to see the correct data for a second then it changes to undefined...Wow, what a doozy. I guess it makes sense but what a pain to find.
Hope it helps someone in the future :)
Your ToDoViewModel, and HomeViewModel need to be observable. This means they need to mix in from WinJS.Binding.mixin, and for the properties that you pull in asynchronously, they need to call this.notify("propertyName", newVal, oldVal) from the property setter.
Note that you need to have getter/setter properties. e.g.
var bindingBase = WinJS.Class.mix(function() {}, WinJS.Binding.mixin);
WinJS.Namespace.define("YourNamespace", {
ToDoViewModel: WinJS.Class.derive(bindingBase, function constructor() {
}, {
_titleStorage: "",
title: {
get: function() { return this._titleStorage; },
set: function(newValue) {
if(newValue === this._titleStorage) {
return;
}
var old = this._titleStorage;
this._titleStorage = newValue;
this.notify("title", newValue, old);
}
}
}),
});
myLib.GetData(todaysDate, function (result) {
var element = that.el.querySelector("#dataPanel");
that.trendsModel.today = result;
if(element) {
WinJS.Binding.processAll(element, that.trendsModel);
}
});
At the point when when the callback returns, I am already on the second page. So the selector was not found returning null. If you pass null to processAll it tries to bind the whole page which is why I was able to see the correct data for a second then it change to undefined...Wow, what doozy. I guess it makes sense but what a pain to find.

Manipulating datastore data after loading

I have a backend that returns some JSON data that is used by my datastore through an ajax proxy. The data is then displayed in a dataview. What I need to do is perform some transformation on the received data on client side before it is displayed by the dataview.
I tried various approaches and settled on attaching a handler to the datastore's load event:
Ext.getStore('MyStore').on('load', function (store, records, successful, operation, eOpts) {
for (var i = 0; i < records.length; i++) {
var e = records[i];
e.data.myField = "constantPrefix" + e.data.myField;
}
});
The handler fires and records are changed correctly.
Problem is, the dataview still shows unchanged data. Is the whole approach correct? If so, why's it not working; if not - how would you achieve that?
Below is the dataview code:
Ext.define('MyProject.view.MyDataView', {
extend : 'Ext.DataView',
xtype : 'my-dataview',
config : {
store : 'MyStore',
baseCls : Ext.os.deviceType === 'Phone' ? 'my-dataview-phone' : 'my-dataview-tablet',
mode: 'MULTI',
allowDeselect: true,
selectedCls: 'tick-visible',
triggerEvent: 'itemdoubletap',
itemTpl : [
'<img class="my-photo my-dataview-photo" src="',
'{myField}"></img>'
].join('')
}
});
instead
e.data.myField = "constantPrefix" + e.data.myField;
use
var value = "constantPrefix" + e.get('myField');
e.set('myField', value);
model.set() is responsible to trigger necessary events, which the dataview does catch.
cheers, Oleg
You just need to inform the store listeners about the modified fields. Try:
Ext.getStore('MyStore').afterEdit(e, ['myField']);
This has the advantage, that the dataview or grid will now show the fields as modified (with these red triangles in the field).

Search in dijit.Tree

In one of my projects I use a dijit.Tree control. I need to add a search to the tree and show only those nodes/leafs which have the searched term in them. However I can't seem to figure out how that can be achieved. Could anybody please help me?
im not entirely sure that your question entirely but it should give hint whereas to go.
Lets use reference documentation example as offset, there is 1) a store 2) a model and 3) the tree
var store = new ItemFileReadStore({
url: "{{dataUrl}}/dijit/tests/_data/countries.json"
});
var treeModel = new ForestStoreModel({
store: store,
query: {"type": "continent"}, // note, this bit
rootId: "root",
rootLabel: "Continents",
childrenAttrs: ["children"]
});
new Tree({
model: treeModel
}, "treeOne");
Interpret the above as such; You have loaded all known countries and continents but 'user' has selected only to show continents by using query on the model - and the hierachy is then represented in a tree structure.
You want a textbox with searching capeabilities, so we hook into onChange
new dijit.form.TextBox({
onChange: function() {
...
}
});
First bit, getting variables
var searchByName = this.get("value");
var oQuery = treeModel.query;
Next, set a new query on the model - preserving the old ones with an object mixin
treeModel.query = dojo.mixin(oQuery, { name: '*'+searchByName+'*' });
Last, notify the model and its tree that changes has occurred - and requery the visible items.
treeModel._requeryTop();
NB If the top-level item (for ForestModel) is not visible, none of its child elements will show, even if the search-string matches those. (Examplewise, Alabama is not shown if US Continent is not matched by query)
EDIT
As OP has the agenda to go by the 'NB', this may not fit needs 100% but its what dojo offers with dijit.Tree.. As it will get rather a lengthy process to recode the model/store queries to include parentbranches up until root i will not do this here - but there are a few tricks still ;)
var tree = new dijit.Tree( {
/**
* Since TreeNode has a getParent() method, this abstraction could be useful
* It sets the dijit.reqistry id into the item-data, so one l8r can get parent items
* which otherwise only can be found by iterating everything in store, looking for item in the parent.children
*
*/
onLoad : function() {
this.forAllNodes(function(node) {
// TreeNode.item <-- > store.items hookup
node.item._NID = node.domNode.id
});
},
/* recursive iteration over TreeNode's
* Carefull, not to make (too many) recursive calls in the callback function..
* fun_ptr : function(TreeNode) { ... }
*/
forAllNodes : function(parentTreeNode, fun_ptr) {
parentTreeNode.getChildren().forEach(function(n) {
fun_ptr(n);
if(n.item.children) {
n.tree.forAllNodes(fun_ptr);
}
})
}
});
(non-tested, but might just work) Example:
// var 'tree' is your tree, extended with
tree.forAllNodes = function(parentTreeNode, fun_ptr) {
parentTreeNode.getChildren().forEach(function(n) {
fun_ptr(n);
if(n.item.children) {
n.tree.forAllNodes(fun_ptr);
}
})
};
// before anything, but the 'match-all' query, run this once
tree.forAllNodes(tree.rootNode, function(node) {
// TreeNode.item <-- > store.items hookup
node.item._NID = node.domNode.id
});
// hopefully, this in end contains top-level items
var branchesToShow = []
// run fetch every search (TextBox.onChange) with value in query
tree.model.store.fetch(query:{name:'Abc*'}, onComplete(function(items) {
var TreeNode = null;
dojo.forEach(items, function(item) {
TreeNode = dijit.byId(item._NID+'');
while(TreeNode.getParent()
&& typeof TreeNode.getParent().item._RI == 'undefined') {
TreeNode = TreeNode.getParent();
}
branchesToShow.push(TreeNode.item);
});
}});
// Now... If a success, try updating the model via following
tree.model.onChildrenChange(tree.model.root, branchesToShow);