I have a table named Bank that contains a Bank_Values column. I need a calculated Bank_Value_Unique column to shows whether each Bank_Value exists somewhere else in the table (i.e. whether its count is greater than 1).
I prepared this query, but it does not work. Could anyone help me with this and/or modify this query?
SELECT
CASE
WHEN NULLIF(LTRIM(RTRIM(Bank_Value)), '') =
(SELECT Bank_Value
FROM [Bank]
GROUP BY Bank_Value
HAVING COUNT(*) = 1)
THEN '0' ELSE '1'
END AS Bank_Key_Unique
FROM [Bank]
A windowed count should work:
SELECT
*,
CASE
COUNT(*) OVER (PARTITION BY Bank_Value)
WHEN 1 THEN 1 ELSE 0
END AS Bank_Value_Unique
FROM
Bank
;
It works also, but I found solution also:
select CASE WHEN NULLIF(LTRIM(RTRIM(Bank_Value)),'') =
(select Bank_Value
from Bank
group by Bank_Value
having (count(distinct Bank_Value) > 2 )) THEN '1' ELSE '0' END AS
Bank_Value_Uniquness
from Bank
It was missing "distinct" in having part.
I have table 'workadress' and it contain 6 columns:
work_ref,work_street ,work_zip,workTN,...
I want to find duplicate rows in the same table depending on:
If (work_street, work_zip) are duplicate together, then you should look at workTN. If it is the same then put value ' ok ', but if workTN is not the same, put 'not ok'. How can I do it with SQL?
Result like:
You can use window functions:
select t.*,
(case when min(workTn) over (partition by work_street, work_zip) =
max(workTn) over (partition by work_street, work_zip)
then 'ok' else 'not ok'
end) as result
from t;
I think just a simple group by and count should be enough to do the job like so:
select
t.*,
case when dups.dups = 1 then 'OK' else 'not OK' end
from my_table t
join (
select work_street, work_zip, count(distinct workTN) dups
from my_table
group by work_street, work_zip
) dups on dups.work_street = t.work_street amd dups.work_zip = t.work_zip
I want to add some calculation inside my case statement to dynamically create the contents of a new column but I get the error:
Column 'Test1.qrank' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
This is the code I'm working on
case
when test1.TotalType = 'Average' then Test2.avgscore
when test1.TotalType = 'PercentOfTot' then (cnt/SUM(test1.qrank))
else cnt
end as displayscore
I did try to group but it didn't work.
Any hints?
The error you posted can happen when you're using a clause in the GROUP BY statement without including it in the select.
Example
This one works!
SELECT t.device,
SUM(case when transits.direction = 1 then 1 else 0 end) ,
SUM(case when transits.direction = 0 then 1 else 0 end) from t1 t
where t.device in ('A','B') group by t.device
This one not (omitted t.device from the select)
SELECT
SUM(case when transits.direction = 1 then 1 else 0 end) ,
SUM(case when transits.direction = 0 then 1 else 0 end) from t1 t
where t.device in ('A','B') group by t.device
This will produce your error complaining that I'm grouping for something that is not included in the select
Please, provide all the query to get more support.
You could use a Common Table Expression to create the SUM first, join it to the table, and then use the WHEN to to get the value from the CTE or the original table as necessary.
WITH PercentageOfTotal (Id, Percentage)
AS
(
SELECT Id, (cnt / SUM(AreaId)) FROM dbo.MyTable GROUP BY Id
)
SELECT
CASE
WHEN o.TotalType = 'Average' THEN r.avgscore
WHEN o.TotalType = 'PercentOfTot' THEN pt.Percentage
ELSE o.cnt
END AS [displayscore]
FROM PercentageOfTotal pt
JOIN dbo.MyTable t ON pt.Id = t.Id
If you're using SQL Server 2005 or above, you can use the windowing function SUM() OVER ().
case
when test1.TotalType = 'Average' then Test2.avgscore
when test1.TotalType = 'PercentOfTot' then (cnt/SUM(test1.qrank) over ())
else cnt
end as displayscore
But it'll be better if you show your full query to get context of what you actually need.
I have a table
create table us
(
a number
);
Now I have data like:
a
1
2
3
4
null
null
null
8
9
Now I need a single query to count null and not null values in column a
This works for Oracle and SQL Server (you might be able to get it to work on another RDBMS):
select sum(case when a is null then 1 else 0 end) count_nulls
, count(a) count_not_nulls
from us;
Or:
select count(*) - count(a), count(a) from us;
If I understood correctly you want to count all NULL and all NOT NULL in a column...
If that is correct:
SELECT count(*) FROM us WHERE a IS NULL
UNION ALL
SELECT count(*) FROM us WHERE a IS NOT NULL
Edited to have the full query, after reading the comments :]
SELECT COUNT(*), 'null_tally' AS narrative
FROM us
WHERE a IS NULL
UNION
SELECT COUNT(*), 'not_null_tally' AS narrative
FROM us
WHERE a IS NOT NULL;
Here is a quick and dirty version that works on Oracle :
select sum(case a when null then 1 else 0) "Null values",
sum(case a when null then 0 else 1) "Non-null values"
from us
for non nulls
select count(a)
from us
for nulls
select count(*)
from us
minus
select count(a)
from us
Hence
SELECT COUNT(A) NOT_NULLS
FROM US
UNION
SELECT COUNT(*) - COUNT(A) NULLS
FROM US
ought to do the job
Better in that the column titles come out correct.
SELECT COUNT(A) NOT_NULL, COUNT(*) - COUNT(A) NULLS
FROM US
In some testing on my system, it costs a full table scan.
As i understood your query, You just run this script and get Total Null,Total NotNull rows,
select count(*) - count(a) as 'Null', count(a) as 'Not Null' from us;
usually i use this trick
select sum(case when a is null then 0 else 1 end) as count_notnull,
sum(case when a is null then 1 else 0 end) as count_null
from tab
group by a
Just to provide yet another alternative, Postgres 9.4+ allows applying a FILTER to aggregates:
SELECT
COUNT(*) FILTER (WHERE a IS NULL) count_nulls,
COUNT(*) FILTER (WHERE a IS NOT NULL) count_not_nulls
FROM us;
SQLFiddle: http://sqlfiddle.com/#!17/80a24/5
This is little tricky. Assume the table has just one column, then the Count(1) and Count(*) will give different values.
set nocount on
declare #table1 table (empid int)
insert #table1 values (1),(2),(3),(4),(5),(6),(7),(8),(9),(10),(NULL),(11),(12),(NULL),(13),(14);
select * from #table1
select COUNT(1) as "COUNT(1)" from #table1
select COUNT(empid) "Count(empid)" from #table1
Query Results
As you can see in the image, The first result shows the table has 16 rows. out of which two rows are NULL. So when we use Count(*) the query engine counts the number of rows, So we got count result as 16. But in case of Count(empid) it counted the non-NULL-values in the column empid. So we got the result as 14.
so whenever we are using COUNT(Column) make sure we take care of NULL values as shown below.
select COUNT(isnull(empid,1)) from #table1
will count both NULL and Non-NULL values.
Note: Same thing applies even when the table is made up of more than one column. Count(1) will give total number of rows irrespective of NULL/Non-NULL values. Only when the column values are counted using Count(Column) we need to take care of NULL values.
I had a similar issue: to count all distinct values, counting null values as 1, too. A simple count doesn't work in this case, as it does not take null values into account.
Here's a snippet that works on SQL and does not involve selection of new values.
Basically, once performed the distinct, also return the row number in a new column (n) using the row_number() function, then perform a count on that column:
SELECT COUNT(n)
FROM (
SELECT *, row_number() OVER (ORDER BY [MyColumn] ASC) n
FROM (
SELECT DISTINCT [MyColumn]
FROM [MyTable]
) items
) distinctItems
Try this..
SELECT CASE
WHEN a IS NULL THEN 'Null'
ELSE 'Not Null'
END a,
Count(1)
FROM us
GROUP BY CASE
WHEN a IS NULL THEN 'Null'
ELSE 'Not Null'
END
Here are two solutions:
Select count(columnname) as countofNotNulls, count(isnull(columnname,1))-count(columnname) AS Countofnulls from table name
OR
Select count(columnname) as countofNotNulls, count(*)-count(columnname) AS Countofnulls from table name
Try
SELECT
SUM(ISNULL(a)) AS all_null,
SUM(!ISNULL(a)) AS all_not_null
FROM us;
Simple!
If you're using MS Sql Server...
SELECT COUNT(0) AS 'Null_ColumnA_Records',
(
SELECT COUNT(0)
FROM your_table
WHERE ColumnA IS NOT NULL
) AS 'NOT_Null_ColumnA_Records'
FROM your_table
WHERE ColumnA IS NULL;
I don't recomend you doing this... but here you have it (in the same table as result)
use ISNULL embedded function.
All the answers are either wrong or extremely out of date.
The simple and correct way of doing this query is using COUNT_IF function.
SELECT
COUNT_IF(a IS NULL) AS nulls,
COUNT_IF(a IS NOT NULL) AS not_nulls
FROM
us
SELECT SUM(NULLs) AS 'NULLS', SUM(NOTNULLs) AS 'NOTNULLs' FROM
(select count(*) AS 'NULLs', 0 as 'NOTNULLs' FROM us WHERE a is null
UNION select 0 as 'NULLs', count(*) AS 'NOTNULLs' FROM us WHERE a is not null) AS x
It's fugly, but it will return a single record with 2 cols indicating the count of nulls vs non nulls.
This works in T-SQL. If you're just counting the number of something and you want to include the nulls, use COALESCE instead of case.
IF OBJECT_ID('tempdb..#us') IS NOT NULL
DROP TABLE #us
CREATE TABLE #us
(
a INT NULL
);
INSERT INTO #us VALUES (1),(2),(3),(4),(NULL),(NULL),(NULL),(8),(9)
SELECT * FROM #us
SELECT CASE WHEN a IS NULL THEN 'NULL' ELSE 'NON-NULL' END AS 'NULL?',
COUNT(CASE WHEN a IS NULL THEN 'NULL' ELSE 'NON-NULL' END) AS 'Count'
FROM #us
GROUP BY CASE WHEN a IS NULL THEN 'NULL' ELSE 'NON-NULL' END
SELECT COALESCE(CAST(a AS NVARCHAR),'NULL') AS a,
COUNT(COALESCE(CAST(a AS NVARCHAR),'NULL')) AS 'Count'
FROM #us
GROUP BY COALESCE(CAST(a AS NVARCHAR),'NULL')
Building off of Alberto, I added the rollup.
SELECT [Narrative] = CASE
WHEN [Narrative] IS NULL THEN 'count_total' ELSE [Narrative] END
,[Count]=SUM([Count]) FROM (SELECT COUNT(*) [Count], 'count_nulls' AS [Narrative]
FROM [CrmDW].[CRM].[User]
WHERE [EmployeeID] IS NULL
UNION
SELECT COUNT(*), 'count_not_nulls ' AS narrative
FROM [CrmDW].[CRM].[User]
WHERE [EmployeeID] IS NOT NULL) S
GROUP BY [Narrative] WITH CUBE;
SELECT
ALL_VALUES
,COUNT(ALL_VALUES)
FROM(
SELECT
NVL2(A,'NOT NULL','NULL') AS ALL_VALUES
,NVL(A,0)
FROM US
)
GROUP BY ALL_VALUES
select count(isnull(NullableColumn,-1))
if its mysql, you can try something like this.
select
(select count(*) from TABLENAME WHERE a = 'null') as total_null,
(select count(*) from TABLENAME WHERE a != 'null') as total_not_null
FROM TABLENAME
Just in case you wanted it in a single record:
select
(select count(*) from tbl where colName is null) Nulls,
(select count(*) from tbl where colName is not null) NonNulls
;-)
for counting not null values
select count(*) from us where a is not null;
for counting null values
select count(*) from us where a is null;
I created the table in postgres 10 and both of the following worked:
select count(*) from us
and
select count(a is null) from us
In my case I wanted the "null distribution" amongst multiple columns:
SELECT
(CASE WHEN a IS NULL THEN 'NULL' ELSE 'NOT-NULL' END) AS a_null,
(CASE WHEN b IS NULL THEN 'NULL' ELSE 'NOT-NULL' END) AS b_null,
(CASE WHEN c IS NULL THEN 'NULL' ELSE 'NOT-NULL' END) AS c_null,
...
count(*)
FROM us
GROUP BY 1, 2, 3,...
ORDER BY 1, 2, 3,...
As per the '...' it is easily extendable to more columns, as many as needed
Number of elements where a is null:
select count(a) from us where a is null;
Number of elements where a is not null:
select count(a) from us where a is not null;