I am trying to compare two strings contry and answer.
myTextField is a textfield control and -country is NSArray
but it will always execute else block even when the two strings are equal
NSString *answer = _myTextField.text;
NSString *contry = _country[self.displayedFlagIndex];
if ( [contry isEqualToString: answer])
{
NSString *test =#"if block ";
NSString *result = [NSString stringWithFormat:#"%#%# is %#", test,answer, #"Correct!!"];
_myTextField.text= result;
}
Well, isEqualToString: works flawlessly. The only thing you need to mind is it does not do case insensitive comparison of string.
If you need that behaviour, please add following category on NSString and call it:
- (BOOL)isEqualIgnoreCaseToString:(NSString *)iString {
return ([self caseInsensitiveCompare:iString] == NSOrderedSame);
}
I am checking if a string appears twice in a row within an array. This code doesn't seem to work, as it just prints out the entire array. What am I missing?
NSString *nameString =
[NSString stringWithContentsOfFile:#"/usr/share/dict/words"
encoding:NSUTF8StringEncoding
error:NULL];
NSArray *names = [nameString componentsSeparatedByString:#"\n"];
//Save last item
NSMutableString *lastOne = [NSMutableString stringWithCapacity:20];
// Go through the array one string at a time
for (NSString *n in names) {
if ([n compare:lastOne options:NSCaseInsensitiveSearch]) {
NSLog(#"%#", n);
}
[lastOne setString:n];
}
compare: and related functions don't return booleans, they return an NSComparisonResult. If you want to see if a string is equal you should instead use
if ([n compare:lastOne options:NSCaseInsensitiveSearch] == NSOrderedSame)
Why does the code give the error - Attempt to mutate immutable object with appendFormat: ?
NSMutableDictionary *dict = [[NSMutableDictionary alloc] init];
for (NSTextTestingResult *match in matches) {
<omitted>
NSMutableString *value;
value = (NSMutableString *)[response stringWithRange:range];
if ([dict objectForKey:#"traveler"])
[dict objectForKey:#"traveler"] appendFormat:#"%#", value]; // Errors here
[dict setObject:value forKey:key];
}
Value is being created as a _NSCFString.
Because [response stringWithRange:range] returns an immutable NSString *, and casting doesn't make it become mutable.
You want value = [[response stringWithRange:range] mutableCopy];.
Note that if you're not using ARC, you need to remember to release the mutableCopy. Although the return value of [response stringWithRange:range] is autoreleased, the mutableCopy is not.
I dont think you can cast a string to mutable like that.
You need to do it like this
ms = [[NSMutableString alloc] init];
[ms setString:immutableString];
Oops wrong again the way the subclass works you should be able to do it like this more simply.
ms = [NSMutableString stringWithString: immutableString];
I have a word list stored in an NSArray, I want to find all the words in it with the ending 'ing'.
Could someone please provide me with some sample/pseudo code.
Use NSPredicate to filter NSArrays.
NSArray *array = #[#"test", #"testing", #"check", #"checking"];
NSPredicate *predicate = [NSPredicate predicateWithFormat:#"SELF ENDSWITH 'ing'"];
NSArray *filteredArray = [array filteredArrayUsingPredicate:predicate];
Let's say you have an array defined:
NSArray *wordList = // you have the contents defined properly
Then you can enumerate the array using a block
// This array will hold the results.
NSMutableArray *resultArray = [NSMutableArray new];
// Enumerate the wordlist with a block
[wordlist enumerateObjectsUsingBlock:(id obj, NSUInteger idx, BOOL *stop) {
if ([obj hasSuffix:#"ing"]) {
// Add the word to the result list
[result addObject:obj];
}
}];
// resultArray now has the words ending in "ing"
(I am using ARC in this code block)
I am giving an example using blocks because its gives you more options should you need them, and it's a more modern approach to enumerating collections. You could also do this with a concurrent enumeration and get some performance benefits as well.
Just loop through it and check the suffixes like that:
for (NSString *myString in myArray) {
if ([myString hasSuffix:#"ing"]){
// do something with myString which ends with "ing"
}
}
NSMutableArray *results = [[NSMutableArray alloc] init];
// assuming your array of words is called array:
for (int i = 0; i < [array count]; i++)
{
NSString *word = [array objectAtIndex: i];
if ([word hasSuffix: #"ing"])
[results addObject: word];
}
// do some processing
[results release]; // if you're not using ARC yet.
Typed from scratch, should work :)
Is there any way to create a new
NSString from a format string like #"xxx=%#, yyy=%#" and a NSArray of objects?
In the NSSTring class there are many methods like:
- (id)initWithFormat:(NSString *)format arguments:(va_list)argList
- (id)initWithFormat:(NSString *)format locale:(id)locale arguments:(va_list)argList
+ (id)stringWithFormat:(NSString *)format, ...
but non of them takes a NSArray as an argument, and I cannot find a way to create a va_list from a NSArray...
It is actually not hard to create a va_list from an NSArray. See Matt Gallagher's excellent article on the subject.
Here is an NSString category to do what you want:
#interface NSString (NSArrayFormatExtension)
+ (id)stringWithFormat:(NSString *)format array:(NSArray*) arguments;
#end
#implementation NSString (NSArrayFormatExtension)
+ (id)stringWithFormat:(NSString *)format array:(NSArray*) arguments
{
char *argList = (char *)malloc(sizeof(NSString *) * arguments.count);
[arguments getObjects:(id *)argList];
NSString* result = [[[NSString alloc] initWithFormat:format arguments:argList] autorelease];
free(argList);
return result;
}
#end
Then:
NSString* s = [NSString stringWithFormat:#"xxx=%#, yyy=%#" array:#[#"XXX", #"YYY"]];
NSLog( #"%#", s );
Unfortunately, for 64-bit, the va_list format has changed, so the above code no longer works. And probably should not be used anyway given it depends on the format that is clearly subject to change. Given there is no really robust way to create a va_list, a better solution is to simply limit the number of arguments to a reasonable maximum (say 10) and then call stringWithFormat with the first 10 arguments, something like this:
+ (id)stringWithFormat:(NSString *)format array:(NSArray*) arguments
{
if ( arguments.count > 10 ) {
#throw [NSException exceptionWithName:NSRangeException reason:#"Maximum of 10 arguments allowed" userInfo:#{#"collection": arguments}];
}
NSArray* a = [arguments arrayByAddingObjectsFromArray:#[#"X",#"X",#"X",#"X",#"X",#"X",#"X",#"X",#"X",#"X"]];
return [NSString stringWithFormat:format, a[0], a[1], a[2], a[3], a[4], a[5], a[6], a[7], a[8], a[9] ];
}
Based on this answer using Automatic Reference Counting (ARC): https://stackoverflow.com/a/8217755/881197
Add a category to NSString with the following method:
+ (id)stringWithFormat:(NSString *)format array:(NSArray *)arguments
{
NSRange range = NSMakeRange(0, [arguments count]);
NSMutableData *data = [NSMutableData dataWithLength:sizeof(id) * [arguments count]];
[arguments getObjects:(__unsafe_unretained id *)data.mutableBytes range:range];
NSString *result = [[NSString alloc] initWithFormat:format arguments:data.mutableBytes];
return result;
}
One solution that came to my mind is that I could create a method that works with a fixed large number of arguments like:
+ (NSString *) stringWithFormat: (NSString *) format arguments: (NSArray *) arguments {
return [NSString stringWithFormat: format ,
(arguments.count>0) ? [arguments objectAtIndex: 0]: nil,
(arguments.count>1) ? [arguments objectAtIndex: 1]: nil,
(arguments.count>2) ? [arguments objectAtIndex: 2]: nil,
...
(arguments.count>20) ? [arguments objectAtIndex: 20]: nil];
}
I could also add a check to see if the format string has more than 21 '%' characters and throw an exception in that case.
#Chuck is correct about the fact that you can't convert an NSArray into varargs. However, I don't recommend searching for the pattern %# in the string and replacing it each time. (Replacing characters in the middle of a string is generally quite inefficient, and not a good idea if you can accomplish the same thing in a different way.) Here is a more efficient way to create a string with the format you're describing:
NSArray *array = ...
NSAutoreleasePool *pool = [NSAutoreleasePool new];
NSMutableArray *newArray = [NSMutableArray arrayWithCapacity:[array count]];
for (id object in array) {
[newArray addObject:[NSString stringWithFormat:#"x=%#", [object description]]];
}
NSString *composedString = [[newArray componentsJoinedByString:#", "] retain];
[pool drain];
I included the autorelease pool for good housekeeping, since an autoreleased string will be created for each array entry, and the mutable array is autoreleased as well. You could easily make this into a method/function and return composedString without retaining it, and handle the autorelease elsewhere in the code if desired.
This answer is buggy. As noted, there is no solution to this problem that is guaranteed to work when new platforms are introduced other than using the "10 element array" method.
The answer by solidsun was working well, until I went to compile with 64-bit architecture. This caused an error:
EXC_BAD_ADDRESS type EXC_I386_GPFLT
The solution was to use a slightly different approach for passing the argument list to the method:
+ (id)stringWithFormat:(NSString *)format array:(NSArray*) arguments;
{
__unsafe_unretained id * argList = (__unsafe_unretained id *) calloc(1UL, sizeof(id) * arguments.count);
for (NSInteger i = 0; i < arguments.count; i++) {
argList[i] = arguments[i];
}
NSString* result = [[NSString alloc] initWithFormat:format, *argList] ;// arguments:(void *) argList];
free (argList);
return result;
}
This only works for arrays with a single element
There is no general way to pass an array to a function or method that uses varargs. In this particular case, however, you could fake it by using something like:
for (NSString *currentReplacement in array)
[string stringByReplacingCharactersInRange:[string rangeOfString:#"%#"]
withString:currentReplacement];
EDIT: The accepted answer claims there is a way to do this, but regardless of how fragile this answer might seem, that approach is far more fragile. It relies on implementation-defined behavior (specifically, the structure of a va_list) that is not guaranteed to remain the same. I maintain that my answer is correct and my proposed solution is less fragile since it only relies on defined features of the language and frameworks.
For those who need a Swift solution, here is an extension to do this in Swift
extension String {
static func stringWithFormat(format: String, argumentsArray: Array<AnyObject>) -> String {
let arguments = argumentsArray.map { $0 as! CVarArgType }
let result = String(format:format, arguments:arguments)
return result
}
}
Yes, it is possible. In GCC targeting Mac OS X, at least, va_list is simply a C array, so you'll make one of ids, then tell the NSArray to fill it:
NSArray *argsArray = [[NSProcessInfo processInfo] arguments];
va_list args = malloc(sizeof(id) * [argsArray count]);
NSAssert1(args != nil, #"Couldn't allocate array for %u arguments", [argsArray count]);
[argsArray getObjects:(id *)args];
//Example: NSLogv is the version of NSLog that takes a va_list instead of separate arguments.
NSString *formatSpecifier = #"\n%#";
NSString *format = [#"Arguments:" stringByAppendingString:[formatSpecifier stringByPaddingToLength:[argsArray count] * 3U withString:formatSpecifier startingAtIndex:0U]];
NSLogv(format, args);
free(args);
You shouldn't rely on this nature in code that should be portable. iPhone developers, this is one thing you should definitely test on the device.
- (NSString *)stringWithFormat:(NSString *)format andArguments:(NSArray *)arguments {
NSMutableString *result = [NSMutableString new];
NSArray *components = format ? [format componentsSeparatedByString:#"%#"] : #[#""];
NSUInteger argumentsCount = [arguments count];
NSUInteger componentsCount = [components count] - 1;
NSUInteger iterationCount = argumentsCount < componentsCount ? argumentsCount : componentsCount;
for (NSUInteger i = 0; i < iterationCount; i++) {
[result appendFormat:#"%#%#", components[i], arguments[i]];
}
[result appendString:[components lastObject]];
return iterationCount == 0 ? [result stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceCharacterSet]] : result;
}
Tested with format and arguments:
NSString *format = #"xxx=%#, yyy=%# last component";
NSArray *arguments = #[#"XXX", #"YYY", #"ZZZ"];
Result: xxx=XXX, yyy=YYY last component
NSString *format = #"xxx=%#, yyy=%# last component";
NSArray *arguments = #[#"XXX", #"YYY"];
Result: xxx=XXX, yyy=YYY last component
NSString *format = #"xxx=%#, yyy=%# last component";
NSArray *arguments = #[#"XXX"];
Result: xxx=XXX last component
NSString *format = #"xxx=%#, yyy=%# last component";
NSArray *arguments = #[];
Result: last component
NSString *format = #"some text";
NSArray *arguments = #[#"XXX", #"YYY", #"ZZZ"];
Result: some text
I found some code on the web that claims that this is possible however I haven't managed to do it myself, however if you don't know the number of arguments in advance you also need to build the format string dynamically so I just don't see the point.
You better off just building the string by iterating the array.
You might find the stringByAppendingString: or stringByAppendingFormat: instance method handy .
One can create a category for NSString and make a function which receives a format, an array and returns the string with replaced objects.
#interface NSString (NSArrayFormat)
+ (NSString *)stringWithFormat:(NSString *)format arrayArguments:(NSArray *)arrayArguments;
#end
#implementation NSString (NSArrayFormat)
+ (NSString *)stringWithFormat:(NSString *)format arrayArguments:(NSArray *)arrayArguments {
static NSString *objectSpecifier = #"%#"; // static is redundant because compiler will optimize this string to have same address
NSMutableString *string = [[NSMutableString alloc] init]; // here we'll create the string
NSRange searchRange = NSMakeRange(0, [format length]);
NSRange rangeOfPlaceholder = NSMakeRange(NSNotFound, 0); // variables are declared here because they're needed for NSAsserts
NSUInteger index;
for (index = 0; index < [arrayArguments count]; ++index) {
rangeOfPlaceholder = [format rangeOfString:objectSpecifier options:0 range:searchRange]; // find next object specifier
if (rangeOfPlaceholder.location != NSNotFound) { // if we found one
NSRange substringRange = NSMakeRange(searchRange.location, rangeOfPlaceholder.location - searchRange.location);
NSString *formatSubstring = [format substringWithRange:substringRange];
[string appendString:formatSubstring]; // copy the format from previous specifier up to this one
NSObject *object = [arrayArguments objectAtIndex:index];
NSString *objectDescription = [object description]; // convert object into string
[string appendString:objectDescription];
searchRange.location = rangeOfPlaceholder.location + [objectSpecifier length]; // update the search range in order to minimize search
searchRange.length = [format length] - searchRange.location;
} else {
break;
}
}
if (rangeOfPlaceholder.location != NSNotFound) { // we need to check if format still specifiers
rangeOfPlaceholder = [format rangeOfString:#"%#" options:0 range:searchRange];
}
NSAssert(rangeOfPlaceholder.location == NSNotFound, #"arrayArguments doesn't have enough objects to fill specified format");
NSAssert(index == [arrayArguments count], #"Objects starting with index %lu from arrayArguments have been ignored because there aren't enough object specifiers!", index);
return string;
}
#end
Because NSArray is created at runtime we cannot provide compile-time warnings, but we can use NSAssert to tell us if number of specifiers is equal with number of objects within array.
Created a project on Github where this category can be found. Also added Chuck's version by using 'stringByReplacingCharactersInRange:' plus some tests.
Using one million objects into array, version with 'stringByReplacingCharactersInRange:' doesn't scale very well (waited about 2 minutes then closed the app). Using the version with NSMutableString, function made the string in about 4 seconds. The tests were made using simulator. Before usage, tests should be done on a real device (use a device with lowest specs).
Edit: On iPhone 5s the version with NSMutableString takes 10.471655s (one million objects); on iPhone 5 takes 21.304876s.
Here's the answer without explicitly creating an array:
NSString *formattedString = [NSString stringWithFormat:#"%# World, Nice %#", #"Hello", #"Day"];
First String is the target string to be formatted, the next string are the string to be inserted in the target.
No, you won't be able to. Variable argument calls are solved at compile time, and your NSArray has contents only at runtime.