I'm currently working on a solution to upload and download files to a WCF service. The client is a class inheriting from ClientBase. I've read the MSDN article on streaming and links on StackOverflow and elsewhere, but I can't seem to figure out why I'm still getting a message about the Message size being too small. I have tested the solution so far with small files and it works.
The service is hosted in IIS 7.5
Here's the App.config from the Client application
<system.web>
<httpRuntime maxRequestLength="67108864" />
</system.web>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding messageEncoding="Mtom" transferMode="Streamed" name="LargeFileStreamingHttpBinding"
maxBufferSize="65536"
maxReceivedMessageSize="2147483647">
<readerQuotas maxDepth="32" maxArrayLength="200000000" maxStringContentLength="200000000"/>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/UpdateService.svc"
binding="basicHttpBinding"
contract="IUpdateService"
name="updateServiceEndpoint"/>
</client>
</system.serviceModel>
Here are the relevant sections in the server
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true"/>
<services>
<service name="UpdateService" behaviorConfiguration="UpdateServiceBehavior">
<endpoint binding="basicHttpBinding" bindingName="LargeFileStreamingWebHttpBinding" contract="IUpdateService"></endpoint>
<endpoint contract="IMetadataExchange" binding="mexHttpBinding" address="mex" />
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="UpdateServiceBehavior" >
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<basicHttpBinding>
<binding messageEncoding="Mtom" transferMode="Streamed" name="LargeFileStreamingWebHttpBinding"
maxBufferSize="65536"
maxReceivedMessageSize="2147483647"
/>
</basicHttpBinding>
</bindings>
</system.serviceModel>
Additionally, I've added the following in on both server and client configs:
<system.web>
<httpRuntime maxRequestLength="2147483647" />
</system.web>
This is how I'm instantiating the client
public class UpdateClient : ClientBase<IUpdateService>, IUpdateService
{
public UpdateClient() : base("updateServiceEndpoint") {}
}
So does have any ideas where I could be going wrong? Any help is appreciated.
-Thanks!
Found the answer - a very simple mistake, the client/endpoint entry was missing the bindingConfiguration attribute
Related
I'm working with a WCF Service hosted in IIS however when i try navigate to the endpoint i receive the error "The protocol 'https' is not supported". It's hosted in IIS 10 locally running Windows 10.
The service is using wsHttpBinding with TransportWithMessageCredential.
Is this error something to do with the SSL certificate or IIS?
I already have a valid localhost certificate in my Local Machine > Personal certificate store.
What I've tried so far
Set the httpsGetUrl attribute to the .svc endpoint.
Checked IIS setting and default protocols is set to "http" which means
both http and https protocols are enabled.
Checked that the Application Pool is using .NET Framework 4.0
Restarted the application pool
I appreciate if someone can assist me.
Here is the current config:
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<services>
<service name="XXX.Zoo.WebServices.ZooServices_3_0"
behaviorConfiguration="ZooServices_3_0_Behavior">
<endpoint
address="https://localhost/Zootest_3_0/ZooServices_3_0.svc"
binding="wsHttpBinding"
bindingConfiguration="ZooServices_3_0_Binding"
contract="XXX.Zoo.WebServices.IZooServices_3_0" />
<endpoint
address="https://localhost/Zootest_3_0/ZooServices_3_0.svc/mex"
binding="mexHttpsBinding"
contract="IMetadataExchange" />
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="ZooServices_3_0_Binding"
maxReceivedMessageSize="2147483647"
maxBufferPoolSize="2147483647" >
<readerQuotas
maxDepth="2147483647"
maxStringContentLength="2147483646"
maxArrayLength="2147483647"
maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647"/>
<security mode="TransportWithMessageCredential">
<transport clientCredentialType="None"
proxyCredentialType="None" realm="" />
<message clientCredentialType="Certificate"
negotiateServiceCredential="true" algorithmSuite="Default"
establishSecurityContext="true" />
</security>
</binding>
</wsHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="ZooServices_3_0_Behavior">
<serviceMetadata httpsGetEnabled="true"
httpsGetUrl="https://localhost/Zootest_3_0/ZooServices_3_0.svc" />
<serviceDebug includeExceptionDetailInFaults="False" />
<!--The serviceCredentials behavior defines a service
certificate which is used by the service to authenticate
itself to its clients and to provide message protection. -->
<serviceCredentials>
<serviceCertificate
findValue="localhost"
storeLocation="LocalMachine"
storeName="My"
x509FindType="FindBySubjectName" />
<clientCertificate>
<authentication
certificateValidationMode="ChainTrust"/>
</clientCertificate>
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
This particular error was resolved by removing the httpsGetUrl attribute from the configuration:
httpsGetUrl="https://localhost/Zootest_3_0/ZooServices_3_0.svc
So the end result looks like this:
<serviceMetadata httpsGetEnabled="true"/>
If you want to enable the https protocol support, you should add the https endpoint which use transport transfer mode to the service. Then we should set up the https protocol site binding in the IIS site binding module.
I have made a demo, wish it is useful to you.
Server end.
[ServiceContract]
public interface IService1
{
[OperationContract]
string GetData(int value);
}
public class Service1 : IService1
{
public string GetData(int value)
{
return string.Format("You entered: {0}", value);
}
}
Web.config
<system.serviceModel>
<services>
<service name="WcfService1.Service1" behaviorConfiguration="mybehavior">
<endpoint address="" binding="basicHttpBinding" contract="WcfService1.IService1" bindingConfiguration="https"></endpoint>
<endpoint address="" binding="basicHttpBinding" contract="WcfService1.IService1" bindingConfiguration="http"></endpoint>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"></endpoint>
</service>
</services>
<bindings>
<basicHttpBinding>
<binding name="https">
<security mode="TransportWithMessageCredential">
<transport clientCredentialType="None"></transport>
</security>
</binding>
<binding name="http">
<security mode="None">
</security>
</binding>
</basicHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="mybehavior">
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="true"/>
</behavior>
</serviceBehaviors>
</behaviors>
<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" />
</protocolMapping>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
</system.serviceModel>
IIS.
Here are some links, wish it is useful to you.
WCF Service not hitting from postman over https
https://social.msdn.microsoft.com/Forums/vstudio/en-US/d42fc165-052d-476a-9580-1240b3d0293d/specify-endpoint-in-wcf-webconfig?forum=wcf
Feel free to let me know if there is anything I can help with.
I have created a simple WCF application to host in sharepoint server.
When deployed i got this error
A relative URI cannot be created because the 'uriString' parameter represents an absolute URI.http://<MySharepointserver>:28000/_vti_bin/WCF/service.svc
Here is my service Web.config
<system.serviceModel>
<services>
<service behaviorConfiguration="AssignmentCreatorMK1.ISAPI.ServiceBehaviour" name="AssignmentCreatorMK1.ISAPI.Service">
<endpoint address="" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IEmployeeService" contract="AssignmentCreatorMK1.ISAPI.IService" name="BasicHttpBinding_IEmployeeService" />
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
</service>
</services>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_IEmployeeService" maxReceivedMessageSize="2147483647" messageEncoding="Mtom">
<readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
</binding>
</basicHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="AssignmentCreatorMK1.ISAPI.ServiceBehaviour">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="false" />
<dataContractSerializer maxItemsInObjectGraph="2147483646" />
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
</system.serviceModel>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>
can somebdy please help me out here ?
I have a WCF service that works using basicHttpBinding, I'm trying to configure it to go over https and authenticate with a SQL membership provider, and to do this I'm trying to convert it to use wsHttpBinding.
However, with the updated config I get the following error when I try to connect with the client:
Could not find default endpoint element that references contract 'KFileService.IKFileWcfService' in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.
Here's the relevant portion of the web.config for the server:
<system.serviceModel>
<protocolMapping>
<remove scheme="http" />
<add scheme="https" binding="wsHttpBinding" bindingConfiguration="wsHttpBinding_IKFileWcfServiceBinding" />
</protocolMapping>
<behaviors>
<serviceBehaviors>
<behavior name="KFileWcfServiceBehavior">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
<dataContractSerializer maxItemsInObjectGraph="2147483646" />
<serviceCredentials>
<userNameAuthentication userNamePasswordValidationMode="MembershipProvider"
membershipProviderName="SqlMembershipProvider" />
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service behaviorConfiguration="KFileWcfServiceBehavior" name="KFileWcfService">
<endpoint address="https://localhost:36492/KFileWcfService.svc"
binding="wsHttpBinding" bindingConfiguration="wsHttpBinding_IKFileWcfServiceBinding"
name="wsHttpBinding_IKFileWcfService" bindingName="wsHttpBinding_IKFileWcfServiceBinding"
contract="KFileWcfService.IKFileWcfService">
<identity>
<certificateReference storeLocation="CurrentUser" />
</identity>
</endpoint>
</service>
</services>
<serviceHostingEnvironment minFreeMemoryPercentageToActivateService="0" multipleSiteBindingsEnabled="true"/>
<bindings>
<wsHttpBinding>
<binding name="wsHttpBinding_IKFileWcfServiceBinding" maxBufferPoolSize="2147483647"
maxReceivedMessageSize="2147483647">
<readerQuotas maxDepth="32" maxStringContentLength="100000" maxArrayLength="2147483647"
maxBytesPerRead="4096" maxNameTableCharCount="16384" />
<security mode="Message">
</security>
</binding>
</wsHttpBinding>
</bindings>
</system.serviceModel>
And here's the client side:
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding name="wsHttpBinding_IKFileWcfService" />
</wsHttpBinding>
</bindings>
<client>
<endpoint address="https://localhost:36492/KFileWcfService.svc"
binding="wsHttpBinding" bindingConfiguration="wsHttpBinding_IKFileWcfService"
contract="KFileWcfService.IKFileWcfService" name="wsHttpBinding_IKFileWcfService" />
</client>
</system.serviceModel>
I've done my best to go through all the existing questions and examples already, but haven't had any luck. Can anyone tell me what I'm doing wrong?
Edit:
For further reference, here's the server side configuration that works with basicHttpBinding:
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<!-- To avoid disclosing metadata information, set the value below to false before deployment -->
<serviceMetadata httpGetEnabled="true" />
<!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="true" />
<dataContractSerializer maxItemsInObjectGraph="2147483646" />
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service name="KFileWcfService">
<endpoint address="https://localhost:36492/KFileWcfService.svc" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IKFileWcfService" contract="KFileService.IKFileWcfService" name="BasicHttpBinding_IKFileWcfService" />
</service>
</services>
<serviceHostingEnvironment minFreeMemoryPercentageToActivateService="0" multipleSiteBindingsEnabled="true"/>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_IKFileWcfService" maxBufferSize="2147483647" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" transferMode="Streamed">
<readerQuotas maxDepth="32" maxStringContentLength="100000" maxArrayLength="2147483647" maxBytesPerRead="4096" maxNameTableCharCount="16384" />
</binding>
</basicHttpBinding>
</bindings>
</system.serviceModel>
And client:
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_IKFileWcfService" />
</basicHttpBinding>
</bindings>
<client>
<endpoint address="https://localhost:36492/KFileWcfService.svc"
binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IKFileWcfService"
contract="KFileService.IKFileWcfService" name="BasicHttpBinding_IKFileWcfService" />
</client>
</system.serviceModel>
The type of the service contract on the client which you're trying to use, based on your error messsage:
KFileService.IKFileWcfService
The type of the service contract interface which you have on your client config:
KFileWcfService.IKFileWcfService
They should be the same. Change the client config to
... contract="KFileService.IKFileWcfService" ...
And it should work.
I am getting this error while passing byte[] to WCF. Can someone plz solve this error??
Configuration at Service(web.config)
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.0"/>
</system.web>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="NewBinding0" maxBufferSize="2097151" maxBufferPoolSize="2097151"
maxReceivedMessageSize="2097151" messageEncoding="Mtom"
transferMode="Streamed">
<readerQuotas maxDepth="2097151" maxStringContentLength="2097151"
maxArrayLength="2097151" maxBytesPerRead="2097151" maxNameTableCharCount="2097151" />
</binding>
</basicHttpBinding>
<mexHttpBinding>
<binding name="higherMessageSize_MEX" />
</mexHttpBinding>
</bindings>
<client>
<endpoint binding="basicHttpBinding" bindingConfiguration="NewBinding0"
contract="LService.IService">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
<endpoint address="mex" binding="mexHttpBinding" bindingConfiguration="higherMessageSize_MEX"
contract="IMetadataExchange" />
</client>
<behaviors>
<serviceBehaviors>
<behavior>
<!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
</configuration>
Configuration at WPF application (app.config)
<configuration>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_IService" closeTimeout="00:01:00"
openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard"
maxBufferSize="2097151" maxBufferPoolSize="2097151" maxReceivedMessageSize="2097151"
messageEncoding="Mtom" textEncoding="utf-8" transferMode="Streamed"
useDefaultWebProxy="true">
<readerQuotas maxDepth="2097151" maxStringContentLength="2097151"
maxArrayLength="2097151" maxBytesPerRead="2097151" maxNameTableCharCount="2097151" />
<security mode="None">
<transport clientCredentialType="None" proxyCredentialType="None"
realm="" />
<message clientCredentialType="UserName" algorithmSuite="Default" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:5980/LService/Service.svc"
binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IService"
contract="LService.IService" name="BasicHttpBinding_IService" />
</client>
</system.serviceModel>
</configuration>
Without knowing your service contract and all the details needed - I can only speculate.
What strikes me is that your server-side config doesn't contain any configuration for a <service>.
The rule is this:
on the server side, you need a <services> tag in your config, which contains any number of <service> tags, which defines each service on that server. Each <service> tag in turn can contain any number of <endpoint> tags to define one or multiple service endpoints
on the client, you have one or multiple <client> entries, each of which contains a single <endpoint> that defines what service address your client connects to
So your server side config should look something like this:
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="NewBinding0" ....... />
</basicHttpBinding>
.....
</bindings>
<services>
<service name="YourNamespace.YourService"
behaviorConfiguration="Default" >
<endpoint name="BasicEndpoint"
address="http://localhost:5757/Services"
binding="basicHttpBinding"
bindingConfiguration="NewBinding0"
contract="YourNamespace.IYourServiceContract" />
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="Default">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
</behaviors>
......
</system.serviceModel>
Your client-side config seems fine - except of course, you have to put the address of your server where the service lives into the address= attribute - that typically isn't localhost
I have a WCF service hosted in IIS7 with netTCP enabled.
This is my web.config in %apppath%\ , where the SVC file is.
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.serviceModel>
<services>
<service name="Search.Querier.WCF.Querier" behaviorConfiguration="SearcherServiceBehavior">
<host>
<baseAddresses>
<add baseAddress="http://localhost:8050/SearcherService"/>
</baseAddresses>
</host>
<endpoint address="net.tcp://localhost:9000/SearcherService"
binding="netTcpBinding"
bindingConfiguration="Binding1"
contract="Search.Querier.WCF.IQuerier" />
</service>
</services>
<bindings>
<netTcpBinding>
<binding name="Binding1"
hostNameComparisonMode="StrongWildcard"
sendTimeout="00:10:00"
maxReceivedMessageSize="65536"
transferMode="Buffered"
portSharingEnabled="false">
<security mode="None">
<transport clientCredentialType="None" />
<message clientCredentialType="None" />
</security>
</binding>
</netTcpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="SearcherServiceBehavior">
<serviceMetadata httpGetEnabled="true" httpGetUrl=""/>
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
<system.web>
<compilation debug="true" />
</system.web>
</configuration>
For some reason, instead of loading on port 8050 as I specified, I see the blue and beige site showing the site at:
http://localhost/SearcherService/searcherservice.svc
and not
http://localhost:8050/SearcherService/searcherservice.svc
Additionally, when I try to run
svcutil.exe http://process.mycomp.com/SearcherService/SearcherService.svc?wsdl
as the page rendered on the URL says, I get an error:
Metadata contains a reference that cannot be resolved: 'http://process.mycomp.com/SearcherService/SearcherService.svc?wsdl'
But I have that specified nowhere else in my web.config
Is there anywhere else it could be?
You are missing a MEX endpoint, have a look at this link:
http://bloggingabout.net/blogs/dennis/archive/2006/11/09/WCF-Part-4-3A00-Make-your-service-visible-through-metadata.aspx