I would like to run a .exe file made with visual studio 2003 but I get an error every time I run it on a windows 7 machine, vista machine, and xp machine. The error on Windows 7 and vista says "application has stopped working" and then makes me close the error box.
In windows xp it's a little different error, "the application failed to operate (0xc0000135) Click on OK to terminate the application."
That error code seems to indicate the application failed to initialize correctly.
It is possible that the anticipated .NET version is not present.
As far as I know, VS 2003 by default compiles against the .NET 1.1 library. There is no straightforward way of installing this on a Windows 7 or Vista box. Do you need to compile it against the .NET 1.1 library, or can you load it in VS2005, change the output .net version to 2.0 or higher, and recompile the application?
If you have the source code to the application, try running the application in debug mode and stepping through line by line until you find the exception. If you do not have the source code, possibly try running the application in a couple different compatibility modes. Another option to try is to check the windows event log for anything more specific.
If you want to get really deep into it, you can use SysInternals ProcMon.exe and filter on the failing exe to view the WinAPI calls that are happening during the failure.
Also, a basic search of forums shows that error is usually accompanied with framework issues. Either recompile the application or check out what your required framework is in the VS2003 project settings.
Related
I am running an assembly jar file in command prompt and getting the exception below. And resulting in termination.
Uncaught error from thread [ccp-akka.persistence.dispatchers.default-plugin-dispatcher-23] shutting down JVM since 'akka.jvm-exit-on-fatal-error' is enabled for ActorSystem[ccp]
There is nothing else running in my windows machine while this.
No code access is there except a jar file.
What might be the issue, i tried restarting the machine a couple of times.
Looks like the issue is only with my machine since it is running fine in all other machines. Even i cross checked all the environmental variables.
Attached the screenshot.
What it says that there is a missing binary dependency, leveldbjni, which interfaces with native/platform specific version of leveldb.
Adding leveldbjni-all to your dependencies as described in the docs (http://doc.akka.io/docs/akka/2.5.0/scala/persistence.html#id8) should solve that, if it doesn't then maybe the platform is unsupported (which seems weird, the leveldbjni homepage lists both win32 and win64 as supported - https://github.com/fusesource/leveldbjni)
Step1: Go To "C:\Users\asaini75" and Delete already existing folder ".datastax_studio"
Step2: Go To "C:\Users\asaini75\Downloads\datastax-studio-6.0.0\bin" and click on "server" windows batch file and Wait until you see the below message on your command prompt.
Step3: Go To browser and hit the URL "http://localhost:9091". You will below the home page.
Step4: Add connection and Notebook. it will work perfectly fine.
I installed the Microsoft Visual C++ 2010 Redistributable for my windows machine, that solved my issue. Reference.
The Microsoft Visual C++ 2010 Redistributable Package installs runtime components of Visual C++ Libraries required to run applications developed with Visual C++ on a computer that does not have Visual C++ 2010 installed.
Download link here (x64).
Yesterday, I could work with Visual Studio 2010 without any problem. However, today after I turned on the computer and tried to open my project (Web application with Visual Basic.NET) on VS2010 again, I got a message box showing as below:
Later, I found out after I tried deleting suo file that this message box will show up whenever I open some file in Visual Studio so I tried to run the application. Then, I found another message box popped up as below:
And after I close the message box, I finally got this window
It says:
Compilation Error
Compiler Error Message: The compiler failed with error code -1073741511.
I have searched for the solution through the internet. I have found a few methods that might solve the solution such as scanning for virus, using clean boot. I have also tried repairing and uninstalling VS2010 and .NET framework but none still work. Right now, I have no idea what I should to do make it work again.
Anyway, I realized that there is Windows auto update when I turned off the computer. Not so sure if this related to the problem (I used Window 8.1).
After formatting Drive C to reinstalling everything again, I found out that the reason might be Windows update. I have started from reinstalling Windows 8, all necessary programs (except Visual Studio and SQL Management Studio) and all window updates required for upgrading to Windows 8.1.
When I successfully got to Windows 8.1, I created system restore point and try installing VS2010 and all windows update. The result had caused the same error I posted in this thread.
After that, I restored back to original state and installed VS2010 first. Then installed some of windows updates. This time, I decided to install all updates except the ones that have publish date after 10/11/2015. The result is satisfied. I don't get this error again.
Later, Hans Passant help me find the actual cause of this problem. Please see this link:
Why do I get an error for "__CrtGetFileInformationByHandleEx " when I try to compile
I'm using the Crystal Report 10 viewer ActiveX control in an Access App I've written. Works great in Office 2003 on 32bit versions of Windows. The problem arrises when I try to run the program in 64 bit Windows (with 32bit Office). I get the following error:
Run-time error '429': ActiveX component can't create object
I get this error on the following line of my VBA code.
Set rdApp = CreateObject("Crystalruntime.application.10")
How can I get this to work in 64bit?
I don't have any specific experience with Crystal Report, but I do have some experience with installing components on a 64-bit Windows environment that were intended for 32-bit Windows, so here are some general suggestions of things to try:
Before installing, try loosening the security privileges - I have Windows Server 2008; on this OS, they're under Start | Administrative Tools | Local Security Policy. Many old installers are thwarted by these controls. You'll want to return them to their defaults after the install.
Make sure that you run the installer with admin privileges (right-click; run as Administrator).
Examine the installation log for Crystal Report - it may indicate a failure registering a component. In one instance, I was able to get the installation working by running the command to register the failed component manually, on an administrator-privileged command line (the command was in the log).
If acceptable, try to create a Windows Virtual Machine running a virtual Windows XP, and try the installations there (this might be a bit tedious, due to your need for MS Office).
Take a look at VMWare's ThinApp - this is intended for packaging applications for administrators, but this was the solution we ended up using to shield one of our 32-bit apps from Windows 64-bit perils
Hope this helps; we struggled for awhile trying different things to get our legacy apps working on a 64-bit environment.
My company has a VB6 application using Crystal Reports 7 which a client has asked to be installed on Windows 7 32 bit. It is currently installed on Windows XP 32bit SP2 machines at the client. Connection to the DB is done via ODBC to SQL Server 2000 instance on another server.
On Windows 7, the installation works fine, however when you try to open the application, the error is given.
I have looked at the following:
Registering all the dll's and ocx files using regsvr32. Some will not register as they either are registered already or the following message is given "Make sure that "[name].dll" is valid DLL or OCX file and then try again." I read this forum thread regarding this: http://social.msdn.microsoft.com/forums/en-US/vblanguage/thread/0653f685-4526-45d9-89f3-8c479a6b4c62
Monitored the opening of the application using a ProcessMonitor application to try and spot if there is a missing dll or ocx file - this does not seem to be the case.
Reviewed the application according to this list and nothing seems to be against these guidelines
I've noticed two items in the knowledge base that relate to this
http://support.microsoft.com/kb/281848 - the comdlg32.ocx bundled with the application is version 6.0.81.69 and the one in the system32 folder on the dev machine (WinXP 32 bit) is 6.1.97.82. However if this was the issue then surely it would not work currently?
http://support.microsoft.com/kb/184898 - I'm not sure how to confirm that this is the issue
Finally, due to complexities, I am not allowed to make code changes to this application. Even if I was, I'm not a VB6 programmer, just the guy who got the terribly support project! If code changes are required, then I'll have to investigate using WinXP mode.
Update: I get the same error in XP Mode. That's a Win XP with SP3 VM. This runs on a Win XP SP2 VM, is there potentially something in SP3 that would have caused this to occur? Or is it just a fact of it being XP Mode?
I got the same error but I solved by using regsvr32.exe in C:\Windows\SysWOW64.
Because we use x64 system. So if your machine is also x64, the ocx/dll must registered also with regsvr32 x64 version
The file msrdo20.dll is missing from the installation.
According to the Support Statement for Visual Basic 6.0 on Windows Vista, Windows Server 2008 and Windows 7 this file should be distributed with the application.
I'm not sure why it isn't, but my solution is to place the file somewhere on the machine, and register it using regsvr32 in the command line, eg:
regsvr32 c:\windows\system32\msrdo20.dll
In an ideal world you would package this up with the redistributable.
This download fixed my VB6 EXE and Access 2016 (using ACEDAO.DLL) run-time error 429. Took me 2 long days to get it resolved because there are so many causes of 429.
http://www.microsoft.com/en-ca/download/details.aspx?id=13255
QUOTE from link:
"This download will install a set of components that can be used to facilitate transfer of data between 2010 Microsoft Office System files and non-Microsoft Office applications"
You say it works once you install the VB6 IDE so the problem is likely to be that the components you are trying to use depend on the VB6 runtime being installed.
The VB6 runtime isn't installed on Windows by default.
Installing the IDE is one way to get the runtime. For non-developer machines, a "redistributable" installer package from Microsoft should be used instead.
Here is one VB6 runtime installer from Microsoft. I'm not sure if it will be the right version for your components:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=7b9ba261-7a9c-43e7-9117-f673077ffb3c
I'm trying to diagnose why my Outlook plugin written in C#/VSTO 3.0/VS 2008 doesn't load after being installed.
The plugin works awesomely on my development machine, which has Visual Studio 2008 installed. I can't expect all my users to have all the prerequisites though so I went through these steps to write an installer:
http://msdn.microsoft.com/en-us/library/cc563937(loband).aspx
I installed the add-in on a fresh Windows XP SP 2 machine with a fresh install of Outlook 2007. It installs all the prereqs ok (.NET 3.5, VSTO 3.0 runtime, Windows Installer 3.1, 2007 PIAs). Outlook starts but the add-in isn't run. If I go to the Add-ins tab in the Trust Center, I see my add-in in the "Inactive Application Add-ins" section with the message "Not loaded. A runtime error occurred during the loading of the COM Add-in.".
Not sure how to find the specific error so I can fix it.
The reg keys look ok. Under HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\BlahAddin I see Description, FriendlyName, LoadBehavior (set to 3 until it fails after which if becomes set to 2), and Manifest.
Tried the VSTO_SUPPRESSDISPLAYALERTS environment variable trick and then launched Outlook from the command line but no output came out.
I have remote debugging more or less working but I'm not sure what to look for. I don't see my DLL loaded when I attach to Outlook, but then again maybe managed DLLs don't show up the same way in VS.
Any other ideas on next steps I could follow to produce a specific error I can diagnose?
Solved my problem after weeks of pain. The "Manifest" reg key was getting corrupted to some junk value during the setup build. It was a known Visual Studio bug that supposedly got fixed in Visual Studio 2008 SP 1, but apparently wasn't for me. Renaming the project name to be different from the plugin name fixed the problem. Random, huh?
Make sure you have try-catch handlers at the top level of all methods called by Outlook and log any exceptions you are unable to handle in some way. Focus your troubleshooting on methods like the Startup method and other methods called during initialization.
You probably want to debug this using the remote debugger. Share out the MSVCMON.EXE folder from your developer machine (in your Visual Studio folders in Program Files) on your test machine (share it with a UNC path), and launch Outlook under the debugger trapping (.NET) exceptions in your modules and putting breakpoints in your methods.
If you need to clean your test computer each time before you install your solution, you should probably run XP under a Virtual PC 2007 VM (free download) and switch to a differencing HD after setting up everything but your plugin to snapshot your pre-installed state once so you don't have to keep uninstalling/reinstalling as you make changes to your program to fix bugs.
Are you installing Debug builds or Release builds? Perhaps one flavor has different requirements. Just guessing.
-Mike [MSFT Office Dev]
On your machine, when you run the addin from Visual Studio, it should create a registry key in HKEY_CURRENT_USER\Software\Microsoft\VSTO\Security\Inclusion{SomeGuid}. Make sure that these registry settings are also being deployed with your addin. They are the ones that allow your code to be trusted.