I am trying to save the output of forfiles to a variable in batch.
I've tried a few things to set a var to the output directly as well as saving to a file
Long story short, I am comparing the output text to another string variable, if it matches an event log is created and I get an alert.
Everything in my script works as intended other than saving the forfile output to the variable so I can compare it to my default text variable
forfiles /P %filename% /D -1 > variable
set TEST=
the variable just stays completely blank.
If I run the command just in command prompt it outputs like this
forfiles /P C:\users\justin.pcs\desktop\test\ /D -1 > variable
ERROR: No files found with the specified search criteria.
So I am getting the error I am watching for, but the variable stays blank. I'm assuming I am missing some sort of switch that is necessary for this.
to get the output of a command, either redirect STDERR to a file and read it back:
forfiles /P C:\users\justin.pcs\desktop\test\ /D -1 2>temp
<temp set /p variable=
echo %variable"%
or use a for construct (no temporary file needed):
for /f "delims=" %%a in ('forfiles /P C:\users\justin.pcs\desktop\test\ /D -1 2^>^&1 1^>nul') do set variable=%%a
echo %variable%
The redirections (2^>^&1 1^>nul)are needed, because STDOUT is parsed, but you need STDERR.
I am trying to save a batch variable into a text file. I currently have this code:
#echo off
Set var=6
#echo %var%>txt.txt
For /f "tokens*" %%i in (txt.txt) do #echo %%i
Pause
It's supposed to save the 6 into the variable var and then write the variable in a text file. I want to do this to save user input into a text file so that when the batch program is terminated it will hold the variables.
There is a little problem with redirection. You are redirecting a "stream"; they are numbered 0-9. 0 is for "Standard Input" (STDIN), 1 is for "Standard Output" (STDOUT), 2 is for "Error Output" (STDERR).
If you use the redirection symbol > without a stream number, it defaults to "1".
So echo text>txt.txt is just an abreviation for echo text 1>txt.txt
Now it's getting tricky: echo 6>txt.txt won't echo "6" to the file, but tries to redirect "Stream 6" (which is empty) to the file. The Standard Output echo is off goes to the screen, because "Stream1" is not redirected.
Solution:
If you try to redirect a number or a string which ends with a number, just use a different syntax:
>txt.txt echo 6
Use the set command to get the contents of a file:
set /p var=<filename
Use the echo command to put into a file:
#echo Contents Of File > "FileName"
To append another line to the end of the file, use:
#echo Contents Of File >> "FileName"
Also, put the commands on separate lines or use '&&' between them on the same line.
I am writing a file to remove spaces from filenames in a folder and then put the result in a .txt file. I just get a result of "Echo is on." over and over.
This is what I have so far:
#echo ON
SET LOCAL EnableDelayedExpansion
For %%# in (*.*) do (
SET var=%%~n#
Set MyVar=%var%
set MyVar=%MyVar: =%
echo %MyVar%>>text.txt
)
Can someone tell me whats wrong?
Removing all spaces (not just leading and trailing) can be done without using setlocal enabledelayedexpansionwith the following line:
set var=%var: =%
This works by replacing all spaces in the string with the empty string.
Source: DOS - String Manipulation
The reason why you are getting ECHO is on. is because delayed expansion was not used, which caused the value of %var% and %MyVar% to be inserted before the for command is run, and since they were not defined at the start, empty variables were inserted in. When the echo %MyVar%>>text.txt was run, it was interpreted as echo >>text.txt. When echo is run without any arguments, it outputs whether echo is on or off, which is what you get in text.txt.
To fix the problem, you have to do two things:
First, there is something wrong with your second line. There is no space between set and local in setlocal. The second line should be SETLOCAL EnableDelayedExpansion.
Second, to use delayed expansion, you have to replace all %s in each variable with !, like !var! instead of %var%.
End result:
#echo ON
SETLOCAL EnableDelayedExpansion
For %%# in (*.*) do (
SET var=%%~n#
Set MyVar=!var!
set MyVar=!MyVar: =!
echo !MyVar!>>text.txt
)
You actually do not need to use a temporary variable in this case, you can just do SET MyVar=%%~n# and skip to set MyVar=!MyVar: =!.
The wrong thing is you've enabled the variable expansion (you wroted it bad...) and also you are not using it, when you use enabledelayedexpansion you need to write the variable names as this: !Variable! instead of this else: %Variable%
But you don't need to use it with this code:
#echo ON
For %%# in (*) do (
SET "var=%%~n#"
Call Set "MyVar=%%var: =%%"
Call echo %%MyVar%%>>text.txt
)
Run the following batch in the folder holding the files to be renamed
#echo off
setlocal enabledelayedexpansion
for %%j in (*.*) do (
set filename=%%~nj
set filename=!filename=.=_!
set filename=!filename= =_!
if not "!filename!"=="%%~nj" ren "%%j" "!filename!%%~xj"
)
you just need to add the print to txt
The set var=%var: =% did not work for me.
So I tried with success for a number the following code:
set /a var-=1 & set /a var+=1
Is it possible to hash variable, something like sha1($var); or md5($var); in PHP, but then in Batch.
Is it possible to get variable from specific line of file? set variable=<textfile.txt would be useful, but it takes only first line. Is it possible to take for example 3rd line of code?
I can't speak to "hashing" a variable in PHP. But there are a number of ways to read the nth line of a text file in Windows batch. Here are two methods to extract the 3rd line.
Using FOR /F with skip:
for /f skip^=2^ delims^=^ eol^= %%A in (textfile.txt) do set "var=%%A"&goto break
:break
Using SET /P:
<textfile.txt (
for /l %%N in (1 1 2) do set /p "="
set "var="
set /p "var="
)
Can anybody help with effective and safe way of removing quotes from batch variables?
I have written a batch file which successfully imports a list of parameters %1, %2, %3 etc. and places them into named variables. Some of these parameters contain multiple words, and therefor are enclosed in double quotes.
> "Susie Jo" (%1)
> "Smith Barnes" (%2)
> "123 E. Main St." (%3)
These %variables are next placed in named variables:
> set FirstName=%1
> set LastName=%2
> set ShipAddr=%3
verification of variables is done by echo.
> echo.%FirstName%
> echo.%LastName%
> echo.%ShipAddr%
results display as
"Susie Jo"
"Smith Barnes"
"123 E. Main St."
I need to eliminate the included quotes on selected variables. For instance, FirstName and LastName are used elsewhere and must not include quotes.
In a test batch file I was successful at eliminating quotes using the ~tilde character in variables.
> set FirstName=%~1
> set LastName=%~2
I thought I had the solution, but I soon experienced unusual behavior with execution of batch files. Suddenly CMD is no recognizing long path statments. Normal execution of batch file from full path
> C:\Documents and Settings\Administrator\My Documents\Txt\batchtest\dataout.bat
returns
> 'C:\Documents' is not recognized as an internal or external command....
So it would appear that the addition of the ~tilde character to the in-coming %1 %2...%n variables has caused some change. Possibly some environment variables have been altered?
I also tried clearing quotes from within variable with various attempts using the FOR command. That seems awkward and I have been unable to learn how to accomplish this by creating a list of variable to perform the task:
something like this:
for %%g in (%FirstName% %LastName%) do (
set %%g=%%~g
set %%h=%%~h
set FirstName=%%~g
set LastName=%%h
echo.%FirstName% %LastName%
)
I think I have two issues.
My 'short and sweet' idea of inserting ~tilde in the incoming %1 %2 variables (%~1, etc) seems to have affected some settings and altered how CMD navigates long pathnames.
I'm still in search of a clean and easy way to eliminate quotes from selected named variables.
Any help for those more experienced would be most appreciated. I'm at the end of my skills here... need some guidance please!
edit 12/26/2009 13:36 PST
entire batch file:
:: dataout.bat
:: revision 12/25/2009 add ~tilde to incoming %variables to eliminate embedded "quotation marks.
:: writes address list using command line parameters
:: writes data output list for QBooks IIF import
:: writes Merchant Order data for RUI
:: sample command line string for testing
:: listmail[firstname][lastname]["address string"]["city string"][state][zip][Order#][PurchDate][Regname]["FirstName LastName"][TransactionID][PaymentMethod][Total][ProductID][Qty][Price_Each][PackPrep] [Shipping] [CommissionPmt] [Invoice#]
:: example: dataout Bellewinkle Moose "123 Green Forest Way" "Vancouver" WA 98664 1004968 05/25/2009 "Bellewinkle Moose" "Olive Oyl" 101738 "On Account" 20.67 FK-1P 1 8.95 3.00 1.39 239
#echo off
cls
c:
cd\
cd documents and settings\administrator\my documents\txt\batchtest
echo processing %1 %2
:VARISET
:: Convert %n command line parameters to string variables
set ($FirstName)=%~1
set ($LastName)=%~2
set ($BillingAddress1)=%~3
set ($BillingCity)=%~4
set ($BillingState)=%~5
set ($BillingPostal)=%~6
set ($OrderNumber)=%~7
set ($Purch_Date)=%~8
set ($RegistrationName)=%~9
shift
set ($TransactionID)=%~9
shift
set ($PaymentMethod)=%~9
shift
set ($Total)=%~9
shift
set ($ProductIdentifier)=%~9
shift
set ($Quantity)=%~9
shift
set ($Price_Each)=%~9
shift
set ($Pack_Prep)=%~9
shift
set ($Shipping)=%~9
shift
set ($ServiceFee)=%~9
shift
set ($Discount)=%~9
shift
set ($Invoice)=%~9
shift
set ($UnitPrice)=%~9
set _ShipCombName=%($FirstName)% %($LastName)%
echo ship combo name is %_ShipCombName%
pause
:: write string varibables to logfile
echo FN %($FirstName)% LN %($LastName)% BA %($BillingAddress1)% %($BillingCity)% %($BillingState)% %($BillingPostal)% %($OrderNumber)% %($Purch_Date)% %($RegistrationName)% %($TransactionID)% %($PaymentMethod)% %($Total)% %($ProductIdentifier)% %($Quantity)% %($Price_Each)% %($Pack_Prep)% %($Shipping)% %($ServiceFee)% %($Discount)% %($Invoice)% %($UnitPrice)% %_ShipCombName% >> d_out_log.txt
:: Assign Account by Service Provider
IF /i %($PaymentMethod)%==Amazon Receivables SET _QBAcct=Amazon.com
:: 12-25-2009 added second Amazon pm't method for versatility
IF /i %($PaymentMethod)%==Amazon SET _QBAcct=Amazon.com
IF /i %($PaymentMethod)%==MAST SET _QBAcct=Auth/Net
IF /i %($PaymentMethod)%==MasterCard SET _QBAcct=Auth/Net
IF /i %($PaymentMethod)%==Visa SET _QBAcct=Auth/Net
IF /i %($PaymentMethod)%==PayPal SET _QBAcct=PayPalPmts
IF /i %($PaymentMethod)%==On Account SET _QBAcct=%($RegistrationName)%
IF /i %($PaymentMethod)%==Mail SET _QBAcct=%($RegistrationName)%
IF /i %($PaymentMethod)%==AMER SET _QBAcct=Auth/Net
IF /i %($PaymentMethod)%==DISC SET _QBAcct=Auth/Net
:: Assign Rep designator based on QBAccount
IF /i %($PaymentMethod)%==Amazon Receivables SET _Rep=Amazon
:: 12-25-2009 added second Amazon pm't method for versatility
IF /i %($PaymentMethod)%==Amazon SET _Rep=Amazon
IF /i %($PaymentMethod)%==MAST SET _Rep=BlueZap
IF /i %($PaymentMethod)%==MasterCard SET _Rep=BlueZap
IF /i %($PaymentMethod)%==Visa SET _Rep=BlueZap
IF /i %($PaymentMethod)%==PayPal SET _Rep=BlueZap
IF /i %($PaymentMethod)%==On Account SET _Rep=R B
IF /i %($PaymentMethod)%==Mail SET _Rep=R B
IF /i %($PaymentMethod)%==AMER SET _Rep=BlueZap
IF /i %($PaymentMethod)%==DISC SET _Rep=BlueZap
:: check for duplicate address data
findstr /i /s "%_ShipCombName%" addrlist.txt
echo errorlevel: %errorlevel%
if errorlevel 1 goto :ADDRWRITE
if errorlevel 0 goto :ADDRFOUND
:ADDRWRITE
echo %_ShipCombName% >> addrlist.txt
echo %($BillingAddress1)% >> addrlist.txt
echo %($BillingCity)% %($BillingState)% %($BillingPostal)% >> addrlist.txt
echo. >> addrlist.txt
echo Address File Written
:ADDRFOUND
echo selected rep is %_Rep%
echo selected account is: %_QBAcct%
pause
:: RUI OUT
:: write Merchant Order ID & RUI Order ID to RUI
:: check for duplicate RUI data in writeRUI.txt
cd..
cd RegKOut
find /i "%($OrderNumber)%" writeRUI.txt
echo errorlevel: %errorlevel%
if errorlevel 1 goto :RUIWRITE
if errorlevel 0 goto :IIFWRITE
:RUIWRITE
echo %($Invoice)% %($OrderNumber)% >> writeRUI.txt
:: end write RUI
:: IIF OUT
:IIFWRITE
:: Check for duplicate invoice data in writeIIF.txt
find /i "%($OrderNumber)%" writeIIF.txt
echo errorlevel: %errorlevel%
if errorlevel 1 goto :HEADWRITE
if errorlevel 0 goto :LINEWRITE
:HEADWRITE
:: write Header, Ship/Handling, discount, Rep & commission data to QB IIF import file
echo %($OrderNumber)% %($Purch_Date)% Invoice %($TransactionID)% %_QBAcct% Accounts Receivable %($Total)% %_Rep% >> writeIIF.txt
echo H/P %($Pack_Prep)% 1 ? >> writeIIF.txt
echo SHP %($Shipping)% 1 ? >> writeIIF.txt
echo DISC %($Discount)% 1 ? >> writeIIF.txt
echo Comm %($ServiceFee)% 1 ? >> writeIIF.txt
:LINEWRITE
IF /i %($ProductIdentifier)% equ PH-1 goto WRITE_DEFA ELSE goto WRITE_DISC
echo %($ProductIdentifier)%
:WRITE_DISC
::writes discounted prices parsed from custom variable:
echo %($ProductIdentifier)% %($Price_Each)% %($Quantity)% ? >> writeIIF.txt
goto :EOF
:WRITE_DEFA
:writes default prices parsed from Product data
echo %($ProductIdentifier)% %($UnitPrice)% %($Quantity)% ? >> writeIIF.txt
goto :EOF
:: 3-second delay
:: TYPE NUL | CHOICE.COM /N /CY /TY,3 >NUL
:EOF
You have an extra double quote at the end, which is adding it back to the end of the string (after removing both quotes from the string).
Input:
set widget="a very useful item"
set widget
set widget=%widget:"=%
set widget
Output:
widget="a very useful item"
widget=a very useful item
Note: To replace Double Quotes " with Single Quotes ' do the following:
set widget=%widget:"='%
Note: To replace the word "World" (not case sensitive) with BobB do the following:
set widget="Hello World!"
set widget=%widget:world=BobB%
set widget
Output:
widget="Hello BobB!"
As far as your initial question goes (save the following code to a batch file .cmd or .bat and run):
#ECHO OFF
ECHO %0
SET BathFileAndPath=%~0
ECHO %BathFileAndPath%
ECHO "%BathFileAndPath%"
ECHO %~0
ECHO %0
PAUSE
Output:
"C:\Users\Test\Documents\Batch Files\Remove Quotes.cmd"
C:\Users\Test\Documents\Batch Files\Remove Quotes.cmd
"C:\Users\Test\Documents\Batch Files\Remove Quotes.cmd"
C:\Users\Test\Documents\Batch Files\Remove Quotes.cmd
"C:\Users\Test\Documents\Batch Files\Remove Quotes.cmd"
Press any key to continue . . .
%0 is the Script Name and Path.
%1 is the first command line argument, and so on.
Your conclusion (1) sounds wrong. There must be some other factor at play.
The problem of quotes in batch file parameters is normally solved by removing the quotes with %~ and then putting them back manually where appropriate.
E.g.:
set cmd=%~1
set params=%~2 %~3
"%cmd%" %params%
Note the quotes around %cmd%. Without them, path with spaces won't work.
If you could post your entire batch code, maybe more specific answer could be made.
I usually just remove all quotes from my variables with:
set var=%var:"=%
And then apply them again wherever I need them e.g.:
echo "%var%"
Spent a lot of time trying to do this in a simple way.
After looking at FOR loop carefully, I realized I can do this with just one line of code:
FOR /F "delims=" %%I IN (%Quoted%) DO SET Unquoted=%%I
Example:
#ECHO OFF
SET Quoted="Test string"
FOR /F "delims=" %%I IN (%Quoted%) DO SET Unquoted=%%I
ECHO %Quoted%
ECHO %Unquoted%
Output:
"Test string"
Test string
The simple tilde syntax works only for removing quotation marks around the command line parameters being passed into the batch files
SET xyz=%~1
Above batch file code will set xyz to whatever value is being passed as first paramter stripping away the leading and trailing quotations (if present).
But, This simple tilde syntax will not work for other variables that were not passed in as parameters
For all other variable, you need to use expanded substitution syntax that requires you to
specify leading and lagging characters to be removed. Effectively we are instructing to remove strip away the first and the last character without looking at what it actually is.
#SET SomeFileName="Some Quoted file name"
#echo %SomeFileName% %SomeFileName:~1,-1%
If we wanted to check what the first and last character was actually quotation before removing it, we will need some extra code as follows
#SET VAR="Some Very Long Quoted String"
If aa%VAR:~0,1%%VAR:~-1%aa == aa""aa SET UNQUOTEDVAR=%VAR:~1,-1%
I learned from this link, if you are using XP or greater that this will simply work by itself:
SET params = %~1
I could not get any of the other solutions here to work on Windows 7.
To iterate over them, I did this:
FOR %%A IN (%params%) DO (
ECHO %%A
)
Note: You will only get double quotes if you pass in arguments separated by a space typically.
This sounds like a simple bug where you are using %~ somewhere where you shouldn't be. The use if %~ doesn't fundamentally change the way batch files work, it just removes quotes from the string in that single situation.
All the answers are complete. But Wanted to add one thing,
set FirstName=%~1
set LastName=%~2
This line should have worked, you needed a small change.
set "FirstName=%~1"
set "LastName=%~2"
Include the complete assignment within quotes. It will remove quotes without an issue. This is a prefered way of assignment which fixes unwanted issues with quotes in arguments.
set widget="a very useful item"
set widget
widget="a very useful item"
set widget=%widget:"=%"
set widget
set widget=a very useful item"
The trailing quote " in line 4 is adding a quote " to the string. It should be removed.
The syntax for line 4 ends with %
I thought I had the solution, but I soon experienced unusual behavior with execution of batch files. Suddenly CMD is no recognizing long path statments. Normal execution of batch file from full path
C:\Documents and Settings\Administrator\My Documents\Txt\batchtest\dataout.bat
returns
'C:\Documents' is not recognized as an internal or external command....
There's your whole problem. CMD doesn't understand spaces inside of filenames from the command line, so it thinks you're trying to pass
and Settings\Administrator\My Documents\Txt\batchtest\dataout.bat
as parameters to the
"C:\Documents"
program.
You need to quote it to run a batch file with spaces in the path:
> "C:\Documents and Settings\Administrator\My Documents\Txt\batchtest\dataout.bat"
would have worked.
#echo off
Setlocal enabledelayedexpansion
Set 1=%1
Set 1=!1:"=!
Echo !1!
Echo "!1!"
Set 1=
Demonstrates with or without quotes reguardless of whether original parameter has quotes or not.
And if you want to test the existence of a parameter which may or may not be in quotes, put this line before the echos above:
If '%1'=='' goto yoursub
But if checking for existence of a file that may or may not have quotes then it's:
If EXIST "!1!" goto othersub
Note the use of single quotes and double quotes are different.
Azure devops sometimes uses double quoting character (") to specify string. Powershell can use single quote character (') to specify string. Naturally I wanted to have a flexibility to be able to specify parameters however I wish, so same parameter can be used from both - command line - via batch file, and as a powershell script, as any parameter, including empty value.
Quote natural thinking is to write something like this:
build.bat:
#echo off
setlocal enabledelayedexpansion
set args=%*
set args=%args:"='%
echo powershell -executionpolicy bypass "%~dpn0.ps1" %args%
endlocal
But like you can guess - this does not work out of box - if no arguments are provided to batch file so %* == empty string. args expands as no string, and next replacement notices that args is not set - and instead of replacing string - it would append extra "=' garbage to args parameter.
Solution to this was just to add extra space in first assignment.
build.bat:
#echo off
setlocal enabledelayedexpansion
set args=%*
set args=%args:"='%
echo powershell -executionpolicy bypass "%~dpn0.ps1" %args%
endlocal
After this character translation should be correct:
C:\test>build
powershell -executionpolicy bypass "C:\test.ps1"
C:\test>build aa
powershell -executionpolicy bypass "C:\test\build.ps1" aa
C:\test>build "aa"
powershell -executionpolicy bypass "C:\test\build.ps1" 'aa'
C:\test>build 'aa'
powershell -executionpolicy bypass "C:\test\build.ps1" 'aa'