We have like 20 WorkManagers and right now our project is in cleaning phase. I am assigned a task to list down all the workmanagers which are being used and which are not. I can see list of created workmanagers on WebLogic Console but how can i figure out if some work manager is handling some requests or ont?
Is there any history graph?
Is there any log?
Anything which tells that which workmanager process which request?
Weblogic 10.2
Look at the admin console and see if all 20 Work Managers are serving requests.
Under
Deployments -> Your Application name -> Configuration -> Workload tab.
Related
After Configuration server Juddi in Eclipse and create environment variable
we get Problem to access to page Gui user and admin and tomcat interface :
I think you are looking at something like :
message java.lang.IllegalStateException: No output folder
I would check the Tomcat logs, the permissions of the user you are running tomcat under, and check the directory that you have installed your tomcat into.
Do not even try to use UDDI
these days. People are moving towards semantic web services ,UDDI is out of the scene.
WSMO and OWL-s are major initiatives for semantic web services. These solutions can provide more precise results.
Here's a few
mDNS/Bonjour/Avahi - can be used to share endpoint information for a web service, or anything else using a TXT record
WS-Discovery - supported by CXF and WCF, shares implementation of a specific interface
ebXML - had a component similar to UDDI
visite this link
What would be the best way to debug Parse Cloud Code? Currently it's a mess of logging to the console and checking logs. Does anyone have a good workable solution?
During development, you should begin by testing against a local hosted server. I.e., I use VS Code. You can set breakpoints and watch variables for their values. You can set up a tool like ngrok to get a remote URL for your local endpoint so you can test with non-local hosted clients if you'd like.
We also use Slack extensively. We've created our own slack bot, and it has several channels it reports relevant information too, triggered from our parse-server. One of these is a dev error channel. Instead of console.logs, which are hard to sift through and find what you're looking for, we push important information to Slack. We don't switch every single console.log to a slack message, just the important "Hey something went wrong here's the information" messages. This brings them to our attention so we can identify and resolve them way faster. Slack is awesome. I recommend using slack, even on a solo project.
at the moment you can access your Logs using a console.log() or console.error() for functions and all general logs of everything that happens with your app, at Back4App you can access using: Server Settings -> Logs -> Settings -> Server System Log.
Or functions and all logs generated by Parse server, they're: request.log.info() and request.log.error(), at Back4App you can access using: Dashboard -> Logs.
I have installed MobileFirst 6.3 appcenter console, worklight console successfully, they are operating fine on Tomcat/7.0.57. However when I try to install Operational Analytics, the documentation has the following
http://www-01.ibm.com/support/knowledgecenter/SSHS8R_6.3.0/com.ibm.worklight.installconfig.doc/monitor/c_op_analytics_installation_tomcat.html
I am using tomcat manager http://localhost:8080/html to deploy the war files. logging in as manager, with the manager-gui role.
worklight-analytics.war - deployed with no issues
when I select the worklight-analytics-service.war file and deploy in the GUI, it throws a blank page first, indicating "connection error", and when I refresh the page, on the status bar in Tomcat manager GUI, I get this message - "FAIL - Tried to use command /upload via a GET request but POST is required";
Please provide some direction on what I need to do get this fixed. I am not sure If I have provided all required information - please bear with me and ask, if anything relevant (obviously I can't figure out what is relevant yet) is required to debug.
So I was able to reproduce your error and I saw this in the logs:
java.lang.IllegalStateException:
org.apache.tomcat.util.http.fileupload.FileUploadBase$SizeLimitExceededException:
the request was rejected because its size (57353297) exceeds the
configured maximum (52428800)
It looks like by default, the web UI will only upload WARs of size 50MB or smaller. The analytics service WAR file is larger than this, so that is why this is failing. I was able to increase the limit by modifying the following lines in
/webapps/manager/WEB-INF/web.xml
<max-file-size>100000000</max-file-size>
<max-request-size>100000000</max-request-size>
This will increase the limit to 100MB. After I did this, I was able to successfully deploy the service WAR.
Just as a heads up, once you get the WAR deployed, you'll be presented with the login page. You'll need a tomcat user with the 'worklightadmin' role in order to get past the login screen.
The worklight-analytics-service WAR file does not have a user interface. It is simply referenced by the worklight-analytics WAR file. When both WARs have been deployed, can you see the analytics console? And does data load just fine? If so, then everything is fine. There is only an issue if you are unable to use the user interface provided by the worklight-analytics WAR file.
Our users are restless. They keep complaining about woolly, unmeasurable stuff, particularly slowness, without giving specifics, which of course makes it very difficult to track down.
Nonetheless, it is quite possible that they are right, that there are server calls that are taking way too long to come back. So I want to put some kind of sniffer on the web site (we're using ASP.NET MVC 4 on IIS7) that will log any call that takes more than n seconds to turn around, or that returns more than x megabytes of data, along with all request parameters, the response size, and maybe a certain amount of response data.
I haven't a clue how to do this, though. Any suggestions?
here is my take on this:
FRT
While you can use failed request tracing to log slow requests, in my experience is more useful for finding out why a request fails before it hits your application, rather than why its running slowly. 9/10 times its going to simply show you that the slowdown is in your code somewhere.
Log Parser
Yes you can download and analyze iis logs. I use Log Parser Lizard to do the analysis - its a great gui over log parser. Here's a sample of how you might query slow requests over 1000ms:
SELECT
To_String(To_timestamp(date, time), 'dd/MM/yyyy hh:mm:ss') As Time,
cs-uri-stem, cs-uri-query, cs-method, time-taken, cs-bytes, sc-status
FROM
'C:\inetpub\logs\LogFiles\W3SVC1\u_ex140721.log'
WHERE
time-taken > 1000
ORDER BY time-taken desc
New Relic
My recommendation - go easy on yourself and sign up for a free trial. No I don't work for them, but I've used their APM product a lot. Install the agent on the server - set it up. In 10 mins you will be amazed at the data you see about the site. Trust me.
Its designed to work in production environments and gives you amazing depth of info on what's running slow, down to the database query and stack traces. Its pure awesome. Once its setup wait for the next user complaint, log in and look at traces for the time frame.
When your pro trial ends, you can still get valuable data on the free tier, but it will only keep last 24 hours. We purchased licenses -expensive yes, but worth every cent. Why? Time taken to identify root causes was reduced by an order of magnitude, we can get proactive by looking at what is number 2, 3 and 4 on the slow requests list and working those before they become big problems, and finally the alerting makes us much more responsive when things were going wrong.
Code it
You could roll you own. This blog uses Mvc ActionFilters to do the logging. You could also use an HttpModule similar to this post. The nice thing about this approach is you can compile and implement the module separately from your application, and then just drop in the dll and update web.config to wire up the module. I would be wary of these approaches for a very busy site. Also, getting the right level of detail to fully identify the root is challenging.
View Requests
As touched on by Appleman1234, IIS has a little known feature to look at requests currently executing. Its handy for the 'hey its running slow right now' situation. You can use appcmd.exe or the IIS gui to do it. You will need to install the 'Request Monitor' IIS feature for this to work. This approach is ok for rudimentary narrowing of the problem, but does not show you whats running slowly in your controller.
There are various ways you can do this:
Failed Requests Tracing(FRT) – formerly known as Failed Request Event Buffering (FREB) with custom failure condition of takes over a certain time to load / run
Logging request information with IIS logging functionality and then using a tool like LogParserStudio
Using tools like Fiddler or IISMonitor on the IIS server to capture request information
For FRT the official documentation is available here and information how to capture dumps for long running process is avaliable here
For logging request information in IIS information about log file analysis is located here
For information on configuring Fiddler to capture IIS requests find information here
A summary of the steps in the linked resources is provided below.
For FRT
From IIS Manager for a given site,In the Actions pane, under Configure, click Failed Request Tracing and enter desired values in dialog box to enable Failed Request Tracing.
From IIS Manager for a given site, under IIS click Failed Request Tracing Rules, in order to define rules of failure for a given request. In the Actions pane, click Add and follow the wizard.
The logs will go in the directory you specify and are viewable in a web broswer.
For IIS logging
Logging is enabled by default on IIS
From IIS Manager for a given site,under IIS click Logging, and in the Actions Pane, click Enable to enable logging if it isn't already.
From IIS Manager for a given site,under IIS click Logging, and then configure as desired and click apply.
Install LogParser, .Net 4.x and LogParserStudio (if you need additional steps see here
Open LogParserStudio and add logs to it, you then can use SQL queries to get information from the log files.
For Fiddler
You need to change the user that IIS runs as to a user that can launch applications, like Fiddler (instead of Network Service), and then launch Fiddler with that user.
Also see Monitor Activity on a Web Server (IIS 7) for further information.
I'm using ActiveMQ 5.10 and would like to create a user that has read-only access through the web console.
Red Hat published this article, mentioning that it's not really read only due to a bug in ActiveMQ.
According to the bug report AMQ-4567, the bug is fixed as of ActiveMQ 5.9. However, I'm not seeing it work appropriately.
I have tried a number of different configurations, with the most recent being two separate JAAS implementations, one for Jetty and one for ActiveMQ. The relevant property files are excerpted below.
I can mostly log in to the web console using the "system" user. But the guest user doesn't work at all. The application user (appuser) doesn't need access to the web console at all.
My authN/authZ needs are pretty trivial: one admin user, one application account, and one read-only monitoring account.
Is there any good way to get this working with a recent version of ActiveMQ (>= 5.9.0)?
groups.properties
admins=system
users=appuser,admin
guests=guest
users.properties
system={password redacted}
appuser=appuser
guest=guest
jetty-realm.properties
system: MD5:46cf1b5451345f5176cd70713e0c9e07,user,admin
guest: guest,guest
As an aside, I used the Jetty tutorial and the Rundeck instructions to figure out the jetty-realm.properties file and chapter 6 of ActiveMQ in Action to work out the ActiveMQ JAAS.
I was finally able to get to what I wanted by deploying the web console to an external Tomcat instance. I assume that when it runs out of process, it can't bypass security and so has to use whatever credentials you provide. In this case, I gave the Tomcat instance the read-only JMX user credentials.
It's not great, as there is no security trimmed UI. You can still attempt to create new destinations, delete destinations, etc. When you try with a read-only user, you get an error. That gets a "D" for UX, but a "B" for security.