I have the following:
TableA
ID | DocumentType | DocumentCode | DocumentDate | Warehouse | RefecenceCode
---+--------------+--------------+--------------+-----------+--------------
1 | DeliveryNote | DOC-001 | 2017-04-21 | 1 | NULL
2 | Invoice | DOC-002 | 2017-04-21 | 2 | DOC-001
As you can see, the warehouse is different on each document and DOC-002 is related to DOC-001 through the information in ReferenceCode column (which means that was created starting from DOC-001 as a source document).
It is supposed for the DOC-002 to have the same information but sometimes might be different and in this case, I was tried to create a query (I think self join applies here) in order to check what information is different in the DOC-002 in this case compared to DOC-001, based on the reference code, but I couldn't managed to do it.
If someone could give me a hand, I'll be very grateful.
This is the SQL query:
select *
from TableA tbl
inner join TableA tbla on tbl.id = tbla.id
where tbla.ReferenceCode = tbl.DocumentCode
You indeed want to join the table to itself. But joining on the ID column won't work, because that column doesn't relate records to each other. Instead, you need to join on the DocumentCode and ReferenceCode fields. Then only include the records that have some difference (in this case, I'm only comparing the DocumentDate and Warehouse fields).
select tbla.*
from TableA tbl
join TableA tbla on tbl.DocumentCode = tbla.ReferenceCode
where tbla.DocumentDate != tbl.DocumentDate
or tbla.Warehouse != tbl.Warehouse
I have 2 tables where column X and Y are concatenated to represent a unique identifier. I want to find all rows in tableB that do not exist in tableA and add them into tableC.
-------tableA-------- // tableA is a master refernce table with all names so far
|__X__|__Y__|_name__|
| 3 | 7 | Mary |
| 3 | 2 | Jaime |
-------tableB-------- // tableB is an input file with all daily names (some repeats already exist in tableA)
|__X__|__Y__|_name__|
| 2 | 5 | Smith |
| 3 | 7 | Mary |
-------tableC-------- // tableC is a temporary holding table for new names
|__X__|__Y__|_name__|
| | | |
DESIRED RESULT:
-------tableC-------- // tableB - tableA = tableC
|__X__|__Y__|_name__|
| 2 | 5 | Smith |
I want to match rows based on a concatenated X+Y value. My SQL query so far looks like this:
INSERT INTO tableC
SELECT * FROM tableA
LEFT JOIN tableB
ON tableA.X & table.B = tableB.X & tableB.Y
WHERE tableB.X & tableB.Y IS null
However, this does not give me the intended result. I cannot use EXISTS as my actual data set is very big. Could anyone give me suggestions?
I don't think the slowness is caused by exists. Your query is probably slow because you're trying to use concatenation to match multiple columns. Use and instead and make sure you have a composite index on (x,y):
This will select all unique rows in tableB that don't have the same (x,y) value in tableA. Note that any rows with the same x,y but a different name will show up in the result (i.e. 2,5,Joe would also appear). If you don't want that, then you have to group by x,y and decide which name you want in case of duplicate x,y but different name.
select distinct x,y,name
from tableB b
where not exists (
select 1 from tableA a
where a.x = b.x
and a.y = b.y
)
What is the difference between a natural join and an inner join?
One significant difference between INNER JOIN and NATURAL JOIN is the number of columns returned.
Consider:
TableA TableB
+------------+----------+ +--------------------+
|Column1 | Column2 | |Column1 | Column3 |
+-----------------------+ +--------------------+
| 1 | 2 | | 1 | 3 |
+------------+----------+ +---------+----------+
The INNER JOIN of TableA and TableB on Column1 will return
SELECT * FROM TableA AS a INNER JOIN TableB AS b USING (Column1);
SELECT * FROM TableA AS a INNER JOIN TableB AS b ON a.Column1 = b.Column1;
+------------+-----------+---------------------+
| a.Column1 | a.Column2 | b.Column1| b.Column3|
+------------------------+---------------------+
| 1 | 2 | 1 | 3 |
+------------+-----------+----------+----------+
The NATURAL JOIN of TableA and TableB on Column1 will return:
SELECT * FROM TableA NATURAL JOIN TableB
+------------+----------+----------+
|Column1 | Column2 | Column3 |
+-----------------------+----------+
| 1 | 2 | 3 |
+------------+----------+----------+
The repeated column is avoided.
(AFAICT from the standard grammar, you can't specify the joining columns in a natural join; the join is strictly name-based. See also Wikipedia.)
(There's a cheat in the inner join output; the a. and b. parts would not be in the column names; you'd just have column1, column2, column1, column3 as the headings.)
An inner join is one where the matching row in the joined table is required for a row from the first table to be returned
An outer join is one where the matching row in the joined table is not required for a row from the first table to be returned
A natural join is a join (you can have either natural left or natural right) that assumes the join criteria to be where same-named columns in both table match
I would avoid using natural joins like the plague, because natural joins are:
not standard sql [SQL 92] and therefore not portable, not particularly readable (by most SQL coders) and possibly not supported by various tools/libraries
not informative; you can't tell what columns are being joined on without referring to the schema
your join conditions are invisibly vulnerable to schema changes - if there are multiple natural join columns and one such column is removed from a table, the query will still execute, but probably not correctly and this change in behaviour will be silent
hardly worth the effort; you're only saving about 10 seconds of typing
A natural join is just a shortcut to avoid typing, with a presumption that the join is simple and matches fields of the same name.
SELECT
*
FROM
table1
NATURAL JOIN
table2
-- implicitly uses `room_number` to join
Is the same as...
SELECT
*
FROM
table1
INNER JOIN
table2
ON table1.room_number = table2.room_number
What you can't do with the shortcut format, however, is more complex joins...
SELECT
*
FROM
table1
INNER JOIN
table2
ON (table1.room_number = table2.room_number)
OR (table1.room_number IS NULL AND table2.room_number IS NULL)
SQL is not faithful to the relational model in many ways. The result of a SQL query is not a relation because it may have columns with duplicate names, 'anonymous' (unnamed) columns, duplicate rows, nulls, etc. SQL doesn't treat tables as relations because it relies on column ordering etc.
The idea behind NATURAL JOIN in SQL is to make it easier to be more faithful to the relational model. The result of the NATURAL JOIN of two tables will have columns de-duplicated by name, hence no anonymous columns. Similarly, UNION CORRESPONDING and EXCEPT CORRESPONDING are provided to address SQL's dependence on column ordering in the legacy UNION syntax.
However, as with all programming techniques it requires discipline to be useful. One requirement for a successful NATURAL JOIN is consistently named columns, because joins are implied on columns with the same names (it is a shame that the syntax for renaming columns in SQL is verbose but the side effect is to encourage discipline when naming columns in base tables and VIEWs :)
Note a SQL NATURAL JOIN is an equi-join**, however this is no bar to usefulness. Consider that if NATURAL JOIN was the only join type supported in SQL it would still be relationally complete.
While it is indeed true that any NATURAL JOIN may be written using INNER JOIN and projection (SELECT), it is also true that any INNER JOIN may be written using product (CROSS JOIN) and restriction (WHERE); further note that a NATURAL JOIN between tables with no column names in common will give the same result as CROSS JOIN. So if you are only interested in results that are relations (and why ever not?!) then NATURAL JOIN is the only join type you need. Sure, it is true that from a language design perspective shorthands such as INNER JOIN and CROSS JOIN have their value, but also consider that almost any SQL query can be written in 10 syntactically different, but semantically equivalent, ways and this is what makes SQL optimizers so very hard to develop.
Here are some example queries (using the usual parts and suppliers database) that are semantically equivalent:
SELECT *
FROM S NATURAL JOIN SP;
-- Must disambiguate and 'project away' duplicate SNO attribute
SELECT S.SNO, SNAME, STATUS, CITY, PNO, QTY
FROM S INNER JOIN SP
USING (SNO);
-- Alternative projection
SELECT S.*, PNO, QTY
FROM S INNER JOIN SP
ON S.SNO = SP.SNO;
-- Same columns, different order == equivalent?!
SELECT SP.*, S.SNAME, S.STATUS, S.CITY
FROM S INNER JOIN SP
ON S.SNO = SP.SNO;
-- 'Old school'
SELECT S.*, PNO, QTY
FROM S, SP
WHERE S.SNO = SP.SNO;
** Relational natural join is not an equijoin, it is a projection of one. – philipxy
A NATURAL join is just short syntax for a specific INNER join -- or "equi-join" -- and, once the syntax is unwrapped, both represent the same Relational Algebra operation. It's not a "different kind" of join, as with the case of OUTER (LEFT/RIGHT) or CROSS joins.
See the equi-join section on Wikipedia:
A natural join offers a further specialization of equi-joins. The join predicate arises implicitly by comparing all columns in both tables that have the same column-names in the joined tables. The resulting joined table contains only one column for each pair of equally-named columns.
Most experts agree that NATURAL JOINs are dangerous and therefore strongly discourage their use. The danger comes from inadvertently adding a new column, named the same as another column ...
That is, all NATURAL joins may be written as INNER joins (but the converse is not true). To do so, just create the predicate explicitly -- e.g. USING or ON -- and, as Jonathan Leffler pointed out, select the desired result-set columns to avoid "duplicates" if desired.
Happy coding.
(The NATURAL keyword can also be applied to LEFT and RIGHT joins, and the same applies. A NATURAL LEFT/RIGHT join is just a short syntax for a specific LEFT/RIGHT join.)
Natural Join: It is combination or combined result of all the columns in the two tables.
It will return all rows of the first table with respect to the second table.
Inner Join: This join will work unless if any of the column name shall be sxame in two tables
A Natural Join is where 2 tables are joined on the basis of all common columns.
common column : is a column which has same name in both tables + has compatible datatypes in both the tables.
You can use only = operator
A Inner Join is where 2 tables are joined on the basis of common columns mentioned in the ON clause.
common column : is a column which has compatible datatypes in both the tables but need not have the same name.
You can use only any comparision operator like =, <=, >=, <, >, <>
Natural Join : A SQL Join clause combines fields from 2 or more tables in a relational database. A natural join is based on all columns in two tables that have the same name and selected rows from the two tables that have equal values in all matched columns.
--- The names and data types of both columns must be the same.
Using Clause : In a natural join,if the tables have columns with the same names but different data types, the join causes and error.To avoid this situation, the join clause can be modified with a USING clause. The USING clause specifies the columns that should be used for the join.
difference is that int the inner(equi/default)join and natural join that in the natuarl join common column win will be display in single time but inner/equi/default/simple join the common column will be display double time.
Inner join and natural join are almost same but there is a slight difference between them. The difference is in natural join no need to specify condition but in inner join condition is obligatory. If we do specify the condition in inner join , it resultant tables is like a cartesian product.
mysql> SELECT * FROM tb1 ;
+----+------+
| id | num |
+----+------+
| 6 | 60 |
| 7 | 70 |
| 8 | 80 |
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
+----+------+
6 rows in set (0.00 sec)
mysql> SELECT * FROM tb2 ;
+----+------+
| id | num |
+----+------+
| 4 | 40 |
| 5 | 50 |
| 9 | 90 |
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
+----+------+
6 rows in set (0.00 sec)
INNER JOIN :
mysql> SELECT * FROM tb1 JOIN tb2 ;
+----+------+----+------+
| id | num | id | num |
+----+------+----+------+
| 6 | 60 | 4 | 40 |
| 7 | 70 | 4 | 40 |
| 8 | 80 | 4 | 40 |
| 1 | 1 | 4 | 40 |
| 2 | 2 | 4 | 40 |
| 3 | 3 | 4 | 40 |
| 6 | 60 | 5 | 50 |
| 7 | 70 | 5 | 50 |
| 8 | 80 | 5 | 50 |
.......more......
return 36 rows in set (0.01 sec)
AND NATURAL JOIN :
mysql> SELECT * FROM tb1 NATURAL JOIN tb2 ;
+----+------+
| id | num |
+----+------+
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
+----+------+
3 rows in set (0.01 sec)
Inner join, join two table where column name is same.
Natural join, join two table where column name and data types are same.
I have two tables like this.
Table1
Column | Type |
---------+------------------+
cod | text |
value99 | double precision |
Table2
Column | Type |
---------+------------------+
cod | text |
value06 | double precision |
and i'd like to join them so i'd have something like
Column | Type |
---------+------------------+
cod | text |
value99 | double precision |
value06 | double precision |
the problem is that not all the codes are present in both tables, so if a code is not present in one of the tables it's value should be null.. In the end i'd like something like this
cod | value99 | value06 |
---------+------------------+------------------+
1 | 10 | 20 |
2 | 13 | NULL |
3 | NULL | 15 |
I think that its not possible using LEFT or RIGHT JOIN.. or maybe it is... any ideas? Thx=)
EDITED:
I've tried the FULL OUTER JOIN but the result is something like
code value code value
1 10 1 4
2 15 NULL NULL
NULL NULL 3 36
ANSWER!!!:
i found the answer thx to #Tobiasopdenbrouw :
SELECT test1.code,test1.value,test2.value FROM public.test1 LEFT OUTER JOIN public.test2 ON test1.code=test2.code
UNION
SELECT test2.code,test1.value,test2.value FROM public.test1 RIGHT OUTER JOIN public.test2 ON test1.code=test2.code
I'm guessing a bit, because your question doesn't describe the required output in great detail, but what you probably need is a helper query that will create a table with all the codes for you (a UNION of 2 SELECT querys). This helper table can then be LEFT JOINED to your 2 source tables).
Edit: I thought of the (FULL) OUTER JOIN answer myself, but in reading between the lines, I don't think that's what the OP really needs. But I can be wrong, of course.
Use a FULL OUTER JOIN.
Using Full Outer Joins
To retain the
nonmatching information by including
nonmatching rows in the results of a
join, use a full outer join. SQL
Server provides the full outer join
operator, FULL OUTER JOIN, which
includes all rows from both tables,
regardless of whether or not the other
table has a matching value.
Consider a join of the Product table
and the SalesOrderDetail table on
their ProductID columns. The results
show only the Products that have sales
orders on them. The ISO FULL OUTER
JOIN operator indicates that all rows
from both tables are to be included in
the results, regardless of whether
there is matching data in the tables.
You can include a WHERE clause with a
full outer join to return only the
rows where there is no matching data
between the tables. The following
query returns only those products that
have no matching sales orders, as well
as those sales orders that are not
matched to a product (although all
sales orders, in this case, are
matched to a product).
select
coalesce(t1.cod, t2.cod)
,t1.value99
,t2.value06
from
table1 t1
full outer join table2 t2 on t1.cod= t2.cod
I have two tables with a variable amount of columns. (I don't know how many columns or what there names will be) for example Table A and Table B.
TableA:
ID | B_ID | {variable}
TableB
ID | {variable}
Query:
SELECT TableA.*, TableB.* FROM TableA INNER JOIN TableB ON TableA.B_ID= TableB.id;
When TableA and TableB both have a column with a same name I can't distinguish between the two different columns. For example of both tables has the column "Name" this query would result in :
ID | ID | B_ID | NAME | NAME |
1 | 35 | 35 | bob | jim |
What I am looking for is a way to differentiate between the two tables. Preferably with a prefex for the column names such as.
TableA_ID | TableB_ID | TableA_B_ID | TableA_NAME | TableB_NAME |
1 | 35 | 35 | bob | jim |
I know of the "AS" keyword but the problem is that I don't know what the column names are going to be before hand. (I don't know if TableA or TableB are going to have the column Name)
So my question is
How do you differentiate the columns between the two tables with a INNER JOIN when the tables may have the same column names ?
I am using SQLite3.
Your result set (given your query) should have all of the TableA columns followed by all the TableB colums, so when you get to the second ID colum, you know you're into the TableB data.
That said, it is would seem odd to me that you're querying all the data out of two tables about which you know functionally nothing...
This is admittedly a hack solution, but this:
SELECT TableA.*, "#", TableB.*
FROM TableA INNER JOIN TableB ON TableA.B_ID= TableB.id;
Would produce a list of results which would be divided in two blocks, left and right of the # column.