awk -F, -f awkfile.awk -v mysearch="search term"
I am trying to use the above command from terminal and use search as the search term in the awk program. My awk program runs perfectly fine while actually assigning the search term inside of the program but I am wondering how to get the variable search to be used?
example of the line it's used at if($j ~ /mysearch/){, this does not work at setting the search term, but actually searching for the string mysearch.
Just remove the slashes:
$j ~ mysearch
This is not ideal, but I suggest to write a bash script, which takes in the search term, replace that search term in the awk script, then run the script. For example:
$ cat dosearch.sh
sed "s/XXX/$1/" awktemplate.awk > awkfile.awk
awk -f awkfile.awk data.txt
$ cat awktemplate.awk
{
j = 1
if ($j ~ /XXX/) {
# Do something, such as
print "Found:", $0
}
}
$ cat data.txt
foo here
bar there
xyz everywhere
$ ./dosearch.sh foo
Found: foo here
$ ./dosearch.sh bar
Found: bar there
In the above example, the awk template contains "XXX" as a search term, the bash script replaces that search term with the first parameter, then invoke awk on the modified script.
$ cat input
tinky-winky
dipsy
laa-laa
noo-noo
po
$ teletubby='po'
$ awk -v "regexp=$teletubby" '$0 ~ regexp' input
po
Note that anything could go into the shell-variable,
even a full-blown regexp, e.g ^d.*y. Just make sure to use single-quotes
to prevent the shell from doing any expansion.
Related
I'm curious about how to set command-line options in awk script, like -F for field separator. I try to write the shebang line like
#!/usr/bin/awk -F ":" -f
and get the following error:
awk: 1: unexpected character '.'
For this example, I can do with
BEGIN {FS=":"}
but I still want to know a way to set all those options. Thanks in advance.
EDIT:
let's use another example that should be easy to test.
inputfile:
1
2
3
4
test.awk:
#!/usr/bin/awk -d -f
{num += $1}
END { print num}
run
/usr/bin/awk -d -f test.awk inputfile
will get 10 and generate a file called awkvars.out with some awk global variables in it.
but
./test.awk inputfile
will get
awk: cmd. line:1: ./test.awk
awk: cmd. line:1: ^ syntax error
awk: cmd. line:1: ./test.awk
awk: cmd. line:1: ^ unterminated regexp
if I remove '-d' from shebang line,
./test.awk inputfile
will normally output 10.
My question is that whether there is a way to write "-d" in test.awk file to generate awkvars.out file?
Answering for the OP question, beyond the setting of FS.
Short Answer: you can not use multiple options with '#!', and since you need to tell awk to read the program from stdin (-f-), you are out of luck.
Long Answer:
When using shebang (#!), there is a limit of single argument (which is passed to the named programs as the 1st argument. So in general:
#! /path/to/prog arg1
input-1
input-2
Will execute /path/to/prog arg1, with the content of the file (including the leading shebang) available as stdin. This is oversimplification, actual rules are more complex., see https://unix.stackexchange.com/questions/87560/does-the-shebang-determine-the-shell-which-runs-the-script
Given this limitation of one argument, when executing awk, the only valid and required parameter is '-f', which indicates that the awk programs is provided on STDIN. You can prepend few other options that do NOT take any argument, for example 'traditional' (e.g., '-Pf-' will force POSIX behavior).
As much as I can tell, all the 'interesting' options (setting FS, RS, ORS, ...) need to be separated from the '-f-' with a space, making it impossible to embed them into the command line, other then using the 'BEGIN { ... }' or similar in the script.
Bottom line, trying #! /usr/bin/awk -f- -F, will attempt to look for program is the same as awk -f' -F', and will look for a file named '- -F`. Usually not very useful, and will not set the FS.
Let's say following is our Input_file, which we are going to use for all mentioned solutions here.
cat Input_file
a,b,c,d
ab,c
1st way of setting Field separator: 1st simple way will be setting FS value in BEGIN section of awk program file. Following is our .awk file.
cat file1.awk
BEGIN{
FS=","
}
{
print $1"..."$2
}
Now when we run the code following output will come:
/usr/local/bin/awk -f file1.awk Input_file
a...b
ab...c
2nd way of setting field separator: 2nd way will be pass FS value before reading Input_file like as follows.
/usr/local/bin/awk -f file.awk FS="," Input_file
Example: Now following is the file.awk file which has awk code.
cat file.awk
{
print $1".."$2
}
Now when we run awk file with awk -f .. command as follows will be result.
/usr/local/bin/awk -f file.awk FS="," Input_file
a..b
ab..c
Which means it is picking up the field separator as , in this above program.
3rd way of setting field separator: We can set field separator in awk -f programs like how we do for usual awk programs using -F',' option as follows.
/usr/local/bin/awk -F',' -f file.awk Input_file
a..b
ab..c
4th way of setting field separator: We could mention field separator as a variable by using -v option on command line while running file.awk script as follows.
/usr/local/bin/awk -v FS=',' -f file.awk Input_file
Never use a shebang to call awk as it robs you of the ability to separate shell arguments into awk arguments and awk variables and do anything else that's better done in shell (e.g. arg parsing with getopts) before calling awk. Just call awk from inside your shell script.
Also, don't name your shell script test.awk as it's a shell script. The fact it's implemented in awk is irrelevant. There's no reason to create a file that you sometimes call as awk file to have awk interpret and other times as just file to have the shell interpret.
We have wrote shell script for multiple file name search pattern.
file format:
<number>_<20180809>.txt
starting with single number and ending with 8 digits number
Command:
awk -v string="12_1234" -v serch="^[0-9]+_+[0-9][0-9][0-9][0-9]$" "BEGIN{ if (string ~/serch$/) print string }"
If sting matches then return value.
You can just change your command in the following way and it will work:
awk -v string='12_1234' -v search='^[0-9]+_+[0-9][0-9][0-9][0-9]$' 'BEGIN{ if (string ~ search) print string }'
12_1234
You do not need to use /.../ syntax for regex if you use the ~ operator and also you had one extra $. You were really close!!!
Then you must adapt the search regex into ^[0-9]_[0-9]{8}$ to match exactly your_<20180809>` pattern.
Also if you are just extracting this information from the file you can use grep,
$ awk -v string='1_12345678' -v search='^[0-9]_[0-9]{8}$' 'BEGIN{ if (string ~ search) print string }'
1_12345678
$ (search='^[0-9]_[0-9]{8}$'; echo '1_12345678')| grep -oE "$search"
1_12345678
My Scenario:
I am writing a bash script in which, I am trying to match pattern using following command.
awk '/'$messageID'/' /file/path/fileName
where $messageID is a bash variable.
I am facing following problem:
As long as $messageID contains string without any special characters it works fine but if variable contains any special character like $ command do not gives proper output.
Expected result:
Even if variable $messageID contains special character, output should be proper.
Any help would be appreciated.
Why don't you pass the variable to awk?
awk -v m="$match" '$0 ~ m' file
This way, you do not have to worry about any character.
Test
$ match="te$t"
$ cat a
hello this is
a te$t line
with other te$t info
$ awk -v m="$match" '$0 ~ m' a
a te$t line
with other te$t info
I try searching a file by using awk. How can I ask awk to read a variable from the command line as a name to get searched in the file:
this is a regular way I use to search the file and I can ask the user to enter a name to search in the file.txt
awk -f myAwk.awk file.txt
How can I manage it like this :
awk -f myAwk.awk file.txt nameToSearch
How can I use ARGC and ARGV to search the nameToSearch in the file.txt?
What you're probably looking for is
awk [-W option] [-F value] [-v var=value] [--] 'program text' [file ...]
so
awk -v MYVAR=nameToSearch -v OTHERVAR=somethingElse -f myAwk.awk file.txt
Is that it? of course order of switches ( -f, -v ) does not matter. Obvously you then need to include MYVAR ( OTHERVAR ) for a variable identifier inside awk program itself.
To pass a variable to awk, you can use the -v command.
For example:
cat file.txt | awk -v p="stringToSearch" '$0 ~ p'
In this command, tou replace stringToSearch with a pattern (please keep the double quote, they are useful for preserving spaces). The awk command $0 ~ p compares the current line to the given pattern.
Another approach is to build the awk command from the shell:
p="stringToSearch"
awk "/$p/" file.txt
You must use double quotes in the command to force expanding $p.
If it's permitted to change the order of arguments, so that we can do this:
awk -f myAwk.awk nameToSearch file.txt
then you can do:
awk 'NR==1 { nameToSearch = $0; next} { ... rest of myAwk.awk here ...}' nameToSearch file.txt
You can of course add the NR==1 {...} block to the beginning of your myAwk.awk file, then continue using:
awk -f myAwk.awk nameToSearch file.txt
The technique Piotr Wadas describes has the same effect:
awk -v nameToSearch=whatever -f myAwk.awk file.txt
and that's what I'd use myself, rather than passing whatever as an additional argument to the script. Passing whatever as an additional argument is what scripters had to do before the -v facilities were added to awk. If writing -v nameToSearch= is too verbose, then I'd wrap the whole thing up in a shell script, and say:
myShellScript whatever file.txt
But you asked how to do it by passing whatever as an additional argument to the awk script, so that's what I demonstrated.
I am using the below code to change an existing awk script so that I can add more and more cases with a simple command.
echo `awk '{if(/#append1/){print "pref'"$1"'=0\n" $0 "\n"} else{print $0 "\n"}}' tf.a
note that the first print is "pref'"$1"'=0\n" so it is referring to the variable $1 in its environment, not in awk itself.
The command ./tfb.a "c" should change the code from:
BEGIN{
#append1
}
...
to:
BEGIN{
prefc=0
#append1
}
...
However, it gives me everything on one line.
Does anyone know why this is?
If you take awk right out of the equation you can see what's going on:
# Use a small test file instead of an awk script
$ cat xxx
hello
there
$ echo `cat xxx`
hello there
$ echo "`cat xxx`"
hello
there
$ echo "$(cat xxx)"
hello
there
$
The backtick operator expands the output into shell "words" too soon. You could play around with the $IFS variable in the shell (yikes), or you could just use double-quotes.
If you're running a modern sh (e.g. ksh or bash, not the "classic" Bourne sh), you may also want to use the $() syntax (it's easier to find the matching start/end delimiter).
do it like this. pass the variable from shell to awk properly using -v
#!/bin/bash
toinsert="$1"
awk -v toinsert=$toinsert '
/#append1/{
$0="pref"toinsert"=0\n"$0
}
{print}
' file > temp
mv temp file
output
$ cat file
BEGIN{
#append1
}
$ ./shell.sh c
BEGIN{
prefc=0
#append1
}