I have installed latest Zend Server CE in my notebook (it has Win 7 installed) and then
I installed it on my desktop machine. But when you start server controller there is an alert saying Connection refused (or timed out)
What's the problem?
When I start server http://localhost:10081/ZendServer/
the following message appears
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, admin#example.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
and apache works well in the following address http://localhost:81
when i telnet localhost 10081 there is a reply !!!
I found from the inet http://forums.zend.com/viewtopic.php?f=8&t=7518 that it's because of not having ipv6 support, I am running windows xp3 on my desktop
how to disable default ipv6 support in Zend conf?
how to fix this problem or should I switch to win 7 (my desktop)?
Thanks in advance!
I had a similar problem, on Debian Squeeze after an upgrade to the currently latest version of Zend from the zend apt repo, [deb http://repos.zend.com/zend-server/deb server non-free] . The Zend gui fails.
zend-server-ce-php-5.3 5.5.0+b63
Log in /usr/local/zend/gui/lighttpd/logs/php.log throws this exception.
[10-Jan-2012 11:20:03] PHP Fatal error: Uncaught exception 'Exception' with message 'Unknown application version' in /usr/local/zend/gui/application/CheckDependencies.php:28
Stack trace:
#0 /usr/local/zend/gui/html/index.php(16): CheckDependencies::getChecker('INSTALLATION_PL...')
#1 {main}
thrown in /usr/local/zend/gui/application/CheckDependencies.php on line 28
The problem is the zend-server.ini file in /usr/local/zend/gui/application/data/zend-server.ini But after doing the changes shown below it seems to work ok again.
--- zend-server.ini 2012-01-05 16:45:29.000000000 +0100
+++ zend-server.ini 2012-01-10 12:01:37.000000000 +0100
## -3,7 +3,7 ##
[zendServer]
version = 5.6.0
-edition = INSTALLATION_PLACEHOLDER_GUI_EDITION
+edition = CE
devEnv=0
This is Zend's default error message, meaning you have some error in the php script you are running. By default, your php.ini file in Zend is configured to report errors, but not specifically state what errors had occurred, which makes this case hard to diagnose. My recommendation is that if you are using this server for debugging purposes, go to your Zend php.ini file (typically C:\Program Files\Zend\ZendServer\etc) and search for "display_errors" and change its default value from "Off" to "On". This will allow you to see the specific error PHP is encountering rather than getting the generic Zend error message.
Related
Apache crashes and I get the following error in the apache log:
AH00428: Parent: child process exited with status 3221226356 -- Restarting.
Backtrace:
Count: 2
Exception #: 0XC0000008
Stack:
ntdll!KiRaiseUserExceptionDispatcher+0x3a
KERNELBASE!CloseHandle+0x1b
libapr_1!apr_shm_size_get+0x27d
libapr_1!apr_shm_destroy+0x12
mod_socache_shmcb+0x161c
mod_ssl!ssl_run_proxy_post_handshake+0x8d12
mod_ssl!ssl_run_pre_handshake+0x3d97
libapr_1!apr_pool_clear+0x6e
httpd!OPENSSL_Applink+0xcef
httpd!OPENSSL_Applink+0x1f98
KERNEL32!BaseThreadInitThunk+0x22
ntdll!RtlUserThreadStart+0x34
Seems to have to do with mod_ssl. I do have a http proxy set up in a https virtual host. However, the same error appears in the Apache log even if I comment out the proxy portion of the config file. This error also tends to be followed by a couple of MySQL errors in the Windows application log complaining about a lost connection. I think that might just be because Apache crashed while the connections were open. I am using the latest versions of Apache 2.4.20, PHP 7.0.8, and MySQL 5.7. Any ideas? Thanks!
I have installed red5 server following this guide: http://tecadmin.net/installing-red5-media-server-on-centos-6/
I am able to access red5-server on port 5080.
But when I try to access "http://:5080/installer/" I get following error:
Trying to connect to war location
Net status: NetConnection.Connect.Failed
I have opened following network port 5080, 1935, 8081, 9998 and 9999.
I don't know what the problem is
This is a side effect of the googlecode shutdown; the fix is described here: https://github.com/Red5/red5-server/issues/180
Change your webapps/installer/WEB-INF/red5-web.properties file. Change the application.repository.url parameter from:
application.repository.url=http://red5.googlecode.com/svn/snapshots/
to
application.repository.url=http://red5.org/snapshots/
My client is using Unleashedsoftware.com to connect to a Magento Store. But it gives this error.
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode>WSDL</faultcode>
<faultstring>
SOAP-ERROR: Parsing WSDL: Couldn't load from 'http://www.domain.com/index.php/api/v2_soap/index/wsdl/1/' : Premature end of data in tag definitions line 2
</faultstring>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When browsing http://www.domain.com/index.php/api/v2_soap/index/ Firebug gives me “500 Internal Service Error”.
When I browse http://www.domain.com/index.php/api/v2_soap/index/wsdl/1/, I am getting valid XML data.
I checked the server log files and it seems like:
[Thu Aug 30 22:22:25 2012] [warn] [client 92.92.92.92] mod_fcgid: stderr: in /home/doaminuser/public_html/lib/Zend/Soap/Server.php on line 762
I been searching for couple of days now and today I tried to duplicate the entire site to another test server, and it seems to be working! So that seems to be a server issue.
Please, anybody got any idea what could be the issue?
Is there any better way of debugging this issue, any sample code or debugging tips.
Magento version is 1.6.2
Thank you.
There's lots of times where Magento's SOAP API fails due to problems your Magento server has communicating with itself.
That is, PHP's SOAP implementation requires that the SOAP server itself fetch the WSDL file via http, and a local network configuration issue gets in the way of Magento fetching it's own WSDL.
You can debug this by SSHing into your Magento server, and running the following command
curl -l 'http://www.example.com/index.php/api/v2_soap/index/wsdl/1/' > /tmp/wsdl.xml
and then examining the wsdl.xml file. Because you're performing this from your web-server, you may get different results than when you're performing it from your local browser.
I had a similar problem when calling the URL
http://www.store.com/index.php/api/v2_soap/?wsdl
After some time I received the message 500 - Internal Server Error and a Premature end of script headers message in the apache error log.
After a whole day of research I figured out, that the Timeout-Directive of the Apache module (configured in httpd.conf on a Linux environment) was set to "20" which caused the server to send the 500 error after 20 seconds. The problem is, that in my case the Magento system needs a longer time to "crawl" through all wsdl.xml files in order to build the WSDL-output (if you are using Magento SOAPv2).
Maybe you should check your Timeout Directive..hope that helps.
"I have memories of this. What worked for me was to put the hostname
in /etc/hosts on the server plus the www alias on 127.0.0.1 However,
in this instance the server was in the building rather than in some
ISP place and the LAN had Windows computers on it. Windows users had
downloaded lots of trojan-virus-porn things that were spending the
whole time spamming the network so the real problem was with the
Windows computers on the network, not with the server or with Magento.
After fdisking the PC's the problem was solved."
Thank You I've been struggling for 2 days with this on magento 1.6 and Windows Server 2008 adding this line to the hosts file (C:\Windows\System32\drivers\etc) solved the issue for me:
127.0.0.1 www.Domain.com
also remember to fix your magento soap (role) because the Roles Resources doesn't save in 1.6 unless you fix this file:
MagentoRoot\app\code\core\Mage\Adminhtml\Block\Api\Tab\Rolesedit.php
replace this:
if (array_key_exists(strtolower($item->getResource_id()), $resources) && $item->getPermission() == 'allow') {
with this:
if (array_key_exists(strtolower($item->getResource_id()), $resources) && $item->getApiPermission() == 'allow') {
In my case the issue was the Mod_Security rule "PHP Easter Egg Access" was enabled.
Rule ID: 380800
Once disabled, the api access worked.
An indicator was in the Apache log file:
Jun 19 09:15:52 httpd[1024961]: [error] [client xyz.xyz.xyz.xyz] ModSecurity: [file "/usr/local/apache/conf/modsec/99_asl_jitp.conf"] [line "116"] [id "380800"] [rev "1"] [msg "Atomicorp.com WAF Rules - Virtual Just In Time Patch: PHP Easter Egg Access"] [data "phpe9568f35-d428-11d2-a769-00aa001acf42"] [severity "CRITICAL"] Access denied with code 403 (phase 2). Pattern match "php(?:e9568f3[56]-d428-11d2-a769-00aa001acf42|b8b5f2a0-3c92-11d3-a3a9-4c7b08c10000)" at REQUEST_URI. [hostname "www.yoursever.com"]...
Magento version: 1.7.0.2
PHP version: 5.3.26
More information about the PHP Easter Egg Access rule:
http://www.atomicorp.com/forums/viewtopic.php?f=3&t=5057
http://www.0php.com/php_easter_egg.php
For those wanting a quick test script to replicate the issue (useful when trying to convince your hosting provider that it's a problem on their end), use:
<?php
$server = new SoapServer("http://<url to your magento shop>/index.php/api/v2_soap/index/wsdl/1/");
?>
This is the line in /lib/Zend/Soap/Server.php that triggers the error.
In my case if you browsed to:
http://< url to your magento shop >/index.php/api/v2_soap/index/wsdl/1/
the xml was fine, but if you ran the above php script on the server, the error was given.
This error most often appeared for me while omitting www for domain given in Magento SOAP url. Url has to match base url specified in the Magento config.
may i know if someone has encountered this before? Found this in WebLogic
managed server logs.
####<Jul 15, 2011 9:59:34 AM EST> <Error> <WTC> <mi009.aiu.com> <ilpmServer3> <ExecuteThread: '58' for queue: 'weblogic.kernel.Default'> <ICO_WS1> <> <BEA-180029> <Caught this Ferror exception: 5 (FBADFLD). Additional exception info found: Unknown fldid32: 168877871>
The exception explanation at WebLogic does not provide much information about the error.
It seems that WLS is calling a TUXEDO server via WTC Tuxedo server is calling a WLS services exported via WTC.
In any of both cases the FIELDID 168877871 is not mapped to the same variable by Tuxedo server OR WLS code.
Please verify with the developers of the app if the FIELDID 168877871 correspond to the same variable for WLS and Tuxedo Server.
In Tuxedo server please check the files of)
env | egrep "FIELDTBLS|FLDTBLDIR"
In Java verify the source.
I have a instance of Oracle Access Manager set up on Server A and a copy of WebGate set up on Apache on Server B which should be working but isn't. When I try to access http(s)://hostname:port/access/oblix/apps/ webgate/bin/webgate.cgi?progid=1 as specified in the directions after everything is set up, I get a web page that says:
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
I get the same error message when accessing other pages which are set up to be protected by WebGate with LocationMatch in Apache's httpd.conf.
Also, I'm not getting any output in webgate/access/oblix/logs/oblog.log even though webgate/access/oblix/conf/oblog_config_wg.xml has the log level set to LOGLEVEL_TRACE.
Does anyone have thoughts on what config files to check that could be causing this problem?
Edit 1: I've found that when I access a page protected by WebGate, the Apache error_log has this:
[Thu Oct 8 09:44:23 2009] [notice] child pid 4970 exit signal Segmentation fault (11)
Edit 2: Also, for some reason, pages which are to be protected by WebGate don't trigger an update to Apache's access_log, even though they do return that error message.
Ah the joy of the webgate install. Here are the usual questions I ask myself:
Does the apache user also own the directory where webgate is installed?
Are you running this on an OS and Apache version verified by Oracle?
Is your httpd.conf correctly setup with the WebGate configs?
Did you put
LD_ASSUME_KERNEL=2.4.19
export LD_ASSUME_KERNEL
in your init.d/httpd file?
Are you clocks in sync between the Access server and the apache host?
Reinstalling Webgate fixed the problem. Not sure what screwed it up.
i got
[2014-03-27T04:41:51.2101+05:30] [OHS] [NOTIFICATION:16] [OHS-9999] [core.c] [pid: 14931] [tid: 139749613860672] [user: root] [VirtualHost: main] child pid 14952 exit signal Segmentation fault (11)
along with
Directory does not exist for read/write [.../oracle/middleware/Oracle_WT1/log] []
in OHS_HOME/network/log/sqlnet.log
After changing file permission of OHS directory appropriately. This issue got resolved for me.