This question is unlikely to help any future visitors; it is only relevant to a small geographic area, a specific moment in time, or an extraordinarily narrow situation that is not generally applicable to the worldwide audience of the internet. For help making this question more broadly applicable, visit the help center.
Closed 11 years ago.
I am trying to build GMP for iOS and i got this configure from someone:
./configure CC="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2"
CPP="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2 -E"
LD="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ld"
CPPFLAGS="-arch armv6
-isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk
-miphoneos-version-min=3.0 -DNO_ASM" --disable-shared --enable-static
--prefix=/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk
/usr/local --host=none-apple-darwin9
It configures and i can run Make aswell. However, when i try to install it I get nothing but errors.
make install-recursive
Making install in tests
Making install in .
....
Making install in expr
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
Making install in tune
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
Making install in doc
make[3]: Nothing to be done for `install-exec-am'.
test -z "/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/usr/local/share/info" || .././install-sh -c -d "/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/usr/local/share/info"
mkdir: /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk: Permission denied
make[3]: *** [install-info-am] Error 1
make[2]: *** [install-am] Error 2
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2
I really need gmp to work and I am not sure what im doing wrong. Please help me.
Make check:
bash-3.2$ make check
make check-recursive
Making check in tests
Making check in .
make libtests.la t-bswap t-constants t-count_zeros t-gmpmax t-hightomask t-modlinv t-popc t-parity t-sub
make[4]: `libtests.la' is up to date.
/bin/sh ../libtool --tag=CC --mode=link /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2 -std=gnu99 -O2 -pedantic -o t-bswap t-bswap.o libtests.la ../libgmp.la
libtool: link: /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2
-std=gnu99 -O2 -pedantic -o t-bswap t-bswap.o ./.libs/libtests.a /Users/X/Downloads/gmp-5.0.2/.libs/libgmp.a ../.libs/libgmp.a
ld: warning: in t-bswap.o, file was built for armv6 which is not the architecture being linked (i386)
ld: warning: in ./.libs/libtests.a, file was built for unsupported file format which is not the architecture being linked (i386)
ld: warning: in /Users/X/Downloads/gmp-5.0.2/.libs/libgmp.a, file was built for unsupported file format which is not the architecture being linked (i386)
ld: warning: in ../.libs/libgmp.a, file was built for unsupported file format which is not the architecture being linked (i386)
Undefined symbols:
"_main", referenced from:
start in crt1.10.6.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[4]: *** [t-bswap] Error 1
make[3]: *** [check-am] Error 2
make[2]: *** [check-recursive] Error 1
make[1]: *** [check-recursive] Error 1
make: *** [check] Error 2
Related
Unable to build valgrind in yocto
I have highleted the problem i am facing
arm-poky-linux-gnueabi-gcc: error: unrecognized argument in option '-march=armv7ve'
arm-poky-linux-gnueabi-gcc: note: valid arguments to '-march=' are: armv2 armv2a armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m armv7-r armv7e-m armv8-a armv8-a+crc iwmmxt iwmmxt2 native
make[5]: *** [intdiv-intdiv.o] Error 1
make[5]: Leaving directory `/home/sarjoodeen/Project/2018/Nippon/YOCTO/iwG22M-release-bsp/build/tmp/work/cortexa7hf-vfp-neon-poky-linux-gnueabi/valgrind/3.15.0-r0/build/none/tests/arm'
make[4]: *** [check-am] Error 2
make[4]: Leaving directory `/home/sarjoodeen/Project/2018/Nippon/YOCTO/iwG22M-release-bsp/build/tmp/work/cortexa7hf-vfp-neon-poky-linux-gnueabi/valgrind/3.15.0-r0/build/none/tests/arm'
make[3]: *** [check-recursive] Error 1
make[3]: Leaving directory `/home/sarjoodeen/Project/2018/Nippon/YOCTO/iwG22M-release-bsp/build/tmp/work/cortexa7hf-vfp-neon-poky-linux-gnueabi/valgrind/3.15.0-r0/build/none/tests'
make[2]: *** [check-recursive] Error 1
make[2]: Leaving directory `/home/sarjoodeen/Project/2018/Nippon/YOCTO/iwG22M-release-bsp/build/tmp/work/cortexa7hf-vfp-neon-poky-linux-gnueabi/valgrind/3.15.0-r0/build/none'
make[1]: *** [check-recursive] Error 1
make[1]: Leaving directory `/home/sarjoodeen/Project/2018/Nippon/YOCTO/iwG22M-release-bsp/build/tmp/work/cortexa7hf-vfp-neon-poky-linux-gnueabi/valgrind/3.15.0-r0/build'
make: *** [check] Error 2
make: Leaving directory `/home/sarjoodeen/Project/2018/Nippon/YOCTO/iwG22M-release-bsp/build/tmp/work/cortexa7hf-vfp-neon-poky-linux-gnueabi/valgrind/3.15.0-r0/build'
ERROR: oe_runmake failed
WARNING: exit code 1 from a shell command.
ERROR: Function failed: do_compile_ptest_base (log file is located at /home/sarjoodeen/Project/2018/Nippon/YOCTO/iwG22M-release-bsp/build/tmp/work/cortexa7hf-vfp-neon-poky-linux-gnueabi/valgrind/3.15.0-r0/temp/log.do_compile_ptest_base.29480)
The error means that the cross gcc doesn't contain the support for armv7ve architecture. The support for armv7ve has been added in gcc-4.9 as evident from the gcc Changelog https://gcc.gnu.org/gcc-4.9/changes.html. Please check your gcc recipe in yocto sources and make sure the gcc version is 4.9 or greater.
When running make in CMake, I only get an error that says /usr/bin/ld unrecognised emulation mode aarch64linux.
Im trying to build DualBootPatcher app for Android, this is the error:
/usr/bin/ld: unrecognised emulation mode: aarch64linux
Supported emulations: elf_x86_64 elf32_x86_64 elf_i386 elf_iamcu elf_l1om elf_k1om i386pep i386pe
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[5]: *** [misc/CMakeFiles/fsck-wrapper.dir/build.make:76: misc/fsck-wrapper] Error 1
make[4]: *** [CMakeFiles/Makefile2:1786: misc/CMakeFiles/fsck-wrapper.dir/all] Error 2
make[3]: *** [Makefile:163: all] Error 2
make[2]: *** [android/CMakeFiles/android-system_arm64-v8a.dir/build.make:111: android/android-system_arm64-v8a-prefix/src/android-system_arm64-v8a-stamp/android-system_arm64-v8a-build] Error 2
make[1]: *** [CMakeFiles/Makefile2:1868: android/CMakeFiles/android-system_arm64-v8a.dir/all] Error 2
make: *** [Makefile:163: all] Error 2>
Im running latest Cmake and binutils. Also tried reinstalling binutils.
Im NOT a developers, so it would be nice if you could explain it^^
Does anyone has a solution?
The issue is clear from the fact that the output is coming from /usr/bin/ld. This is the system ld, rather than the ld included with the NDK. You should investigate why this ld is being executed instead, for example via strace.
For me it turned out to be a file permissions issue - the NDK zip file had extracted without execute permissions, so the toolchain binaries were silently ignored. A few chmod +x later and all was well.
I need to run apache in fips 140-2 mode and I am following the instructions given here: https://wiki.openssl.org/index.php/FIPS_Library_and_Apache
However I am using a newer version of apache, I have these packages instead of the ones listed in the wiki:
openssl-fips-2.0.16.tar.gz
openssl-1.0.2n.tar.gz
httpd-2.4.29.tar.gz
apr-util-1.6.1.tar.gz
apr-1.6.3.tar.gz
pcre-8.41.tar.gz
Everything works fine until I attempt a make on the httpd package and it then fails. If I run a make without the two exports for the fingerprints, it completes without issue:
export CC=/usr/local/ssl/fips-2.0/bin/fipsld
export FIPSLD_CC=/usr/bin/gcc
However as the wiki describes when you enable SSLFIPS in httpd.conf it will fail to start with the fingerprint issue without these variables set. But when I attempt to run a make with these exports I get the following error:
/root/httpd-2.4.29/srclib/apr/libtool --silent --mode=link /usr/local/ssl/fips-2.0/bin/fipsld -g -O2 -pthread -L/usr/local/ssl/lib -lssl -lcrypto -luuid -lrt -lcrypt -lpthread -ldl \
-o ab ab.lo /root/httpd-2.4.29/srclib/apr-util/libaprutil-1.la -lexpat /root/httpd-2.4.29/srclib/apr/libapr-1.la -luuid -lrt -lcrypt -lpthread -ldl -lm
./.libs/ab: error while loading shared libraries: libaprutil-1.so.0: cannot open shared object file: No such file or directory
Makefile:73: recipe for target 'ab' failed
make[2]: *** [ab] Error 127
make[2]: Leaving directory '/root/httpd-2.4.29/support'
/root/httpd-2.4.29/build/rules.mk:75: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/root/httpd-2.4.29/support'
/root/httpd-2.4.29/build/rules.mk:75: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
I'm no expert in compiling apache, so no idea why it fails when using those exported variables. Can anyone help?
After a lot of testing, the instructions seem to be working for the older versions, but for the newer version of apr and httpd the "--with-included-apr" appeared to be the problem.
Instead of using this, we built apr and apr-util first by its self, then ran the .config with "“-with-apr=/usr/local/apr/ -with-apr-util=/usr/local/apr-util/" instead. This allowed it to compile and I was able to set SSLFIPS on without issue.
I was trying to install global from source. I run
./configure --with-exuberant-ctags=/usr/bin/ctags
and it runs OK. However, when I run
make
it gives the error
/bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -o gtags-cscope gtags-cscope.o alloc.o basename.o
build.o command.o display.o edit.o exec.o find.o help.o history.o input.o logdir.o mouse.o mygetenv.o mypop
en.o ../libparser/libgloparser.a ../libutil/libgloutil.a ../libdb/libglodb.a ../libglibc/libgloglibc.a -llt
dl -lncurses
libtool: link: gcc -g -O2 -o gtags-cscope gtags-cscope.o alloc.o basename.o build.o command.o display.o edi
t.o exec.o find.o help.o history.o input.o logdir.o mouse.o mygetenv.o mypopen.o ../libparser/libgloparser
.a ../libutil/libgloutil.a ../libdb/libglodb.a ../libglibc/libgloglibc.a -lltdl -lncurses
/usr/bin/ld: input.o: undefined reference to symbol 'erasechar'
/usr/lib/libtinfo.so.6: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:461: gtags-cscope] Error 1
make[2]: Leaving directory '/home/pspencil/tmp/global-6.5.7/gtags-cscope'
make[1]: *** [Makefile:517: all-recursive] Error 1
make[1]: Leaving directory '/home/pspencil/tmp/global-6.5.7'
make: *** [Makefile:424: all] Error 2
I have installed the package ncurses which apparently should provide the erase char symbol. I cannot find anything useful on Google.
Explicitly link the tinfo library.
NCurses uses tinfo, from what I have read ncurses should include the tinfo functionality in it's own library, maybe this has changed recently.
I am trying to compile apache from source with only module "proxy and rewrite". Here is what I used as my configure
sudo ./configure --disable-actions --disable-asis --disable-autoindex --disable-cgi --disable-cgid --disable-charset-lite --disable-dir --disable-env --disable-imap --disable-include --disable-negotiation --disable-setenvif --disable-status --disable-userdir --enable-proxy --enable-proxy-connect --enable-proxy-ftp --enable-proxy-http --enable-rewrite
then I was able to run make
sudo make
this is where the problem is, it ends with this error:
Making all in support
make[1]: Entering directory `/home/james/apache2/httpd-2.0.65/support'
make[2]: Entering directory `/home/james/apache2/httpd-2.0.65/support'
/home/james/apache2/httpd-2.0.65/srclib/apr/libtool --silent --mode=link gcc -g -O2 -pthread -D_REENTRANT -D_GNU_SOURCE -DAP_HAVE_DESIGNATED_INITIALIZER -I/home/james/apache2/httpd-2.0.65/srclib/apr/include -I/home/james/apache2/httpd-2.0.65/srclib/apr-util/include -I/home/james/apache2/httpd-2.0.65/srclib/apr-util/xml/expat/lib -I. -I/home/james/apache2/httpd-2.0.65/os/unix -I/home/james/apache2/httpd-2.0.65/server/mpm/prefork -I/home/james/apache2/httpd-2.0.65/modules/http -I/home/james/apache2/httpd-2.0.65/modules/filters -I/home/james/apache2/httpd-2.0.65/modules/proxy -I/home/james/apache2/httpd-2.0.65/include -I/home/james/apache2/httpd-2.0.65/modules/generators -I/home/james/apache2/httpd-2.0.65/modules/dav/main -export-dynamic -L/home/james/apache2/httpd-2.0.65/srclib/apr-util/xml/expat/lib -o htdigest htdigest.lo /home/james/apache2/httpd-2.0.65/srclib/pcre/libpcre.la /home/james/apache2/httpd-2.0.65/srclib/apr-util/libaprutil-0.la /home/james/apache2/httpd-2.0.65/srclib/apr-util/xml/expat/libexpat.la /home/james/apache2/httpd-2.0.65/srclib/apr/libapr-0.la -lrt -lm -lcrypt -lnsl -lpthread -ldl
/home/james/apache2/httpd-2.0.65/srclib/apr-util/.libs/libaprutil-0.so: undefined reference to `crypt_r'
collect2: error: ld returned 1 exit status
make[2]: *** [htdigest] Error 1
make[2]: Leaving directory `/home/james/apache2/httpd-2.0.65/support'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/james/apache2/httpd-2.0.65/support'
make: *** [all-recursive] Error 1
Anybody have an idea on what I am doing wrong?
Thanks for the help!
I am not sure why it would not compile on my Laptop (Mint 16?), but I compiled it on the linux server it worked great! Its running Debian 7