I have query that I run on Oracle that is supposed to allow hyphen characters. The results are supposed to match the exact String including the hyphen character as follows:
SELECT <field>
FROM <table>
WHERE LOWER(field) LIKE '%-pa%';
The results however show "web-page", "web -page" as well as "web page". However, I only would like to find "web-page" and "web -page" in this case. I tried to escape the hyphen character with a backslash but that results in no records found. Can anybody give me a hint on how to make this work?
That's not my observation of how Oracle treats hyphens. Here's a brief sample of what I see:
SQL> select * from fb;
ID
----------
Web-Page
Web Page
Web -Page
SQL> select * from fb where lower(id) like '%-pa%';
ID
----------
Web-Page
Web -Page
Are you sure you're not using the underscore instead of the hyphen? The underscore is a single character wild card.
Normaly the hyphen shouldn't need to be escaped, but you can try
select <field> from <table> where lower(field) like '%X-pa%' escape 'X';
instead of 'X', you can use any arbitrary character
Related
I am querying a database that uses Ingres 10.2. I cannot seem to get any of my pattern matching code to work as I expect it to.
For example:
SELECT TOP 20 *
FROM table_name
WHERE variable_name IN ('XaKDG', 'XaKDH')
returns both XaKDG and XaKDH as expected.
However, when trying this:
SELECT TOP 5 *
FROM table_name
WHERE variable_name LIKE 'XaKD\[GH\]' escape '\'
I get the following errors:
ERROR '22025' 1315172
Illegal pattern match specified
Illegal ESCAPE sequence.
I am baffled, as the user guide states the following:
"To match any string starting with 0 through 4, followed by an uppercase letter, then a [, any two characters and a final ]:"
name like '\[01234\]\[A-Z\][__]' escape '\'
As far as I can tell, my query should be correct. I also tried without the escape characters at all, and with double escape characters. These didn't produce any errors, but also did not return anything.
I appreciate any help.
The User guide is here: https://supportactian.secure.force.com/help/servlet/fileField?id=0BEf3000000PLPf
Based on my research so far this character indicates bad encoding between the database and front end. Unfortunately, I don't have any control over either of those. I'm using Teradata Studio.
How can I filter this character out? I'm trying to perform a REGEX_SUBSTR function on a column that occasionally contains �, which throws the error "The string contains an untranslatable character".
Here is my SQL. AIRCFT_POSITN_ID is the column that contains the replacement character.
SELECT DISTINCT AIRCFT_POSITN_ID,
REGEXP_SUBSTR(AIRCFT_POSITN_ID, '[0-9]+') AS AUTOROW
FROM PROD_MAE_MNTNC_VW.FMR_DISCRPNCY_DFRL
WHERE DFRL_CREATE_TMS > CURRENT_DATE -25
Your diagnostic is correct, so first of all, you might want to check the Session Character Set (it is part of the connection definition).
If it is ASCII change it to UTF8 and you will be able to see the original characters instead of the substitute character.
And in case the character is indeed part of the data and not just an indication for encoding translations issues:
The substitute character AKA SUB (DEC: 26 HEX: 1A) is quite unique in Teradata.
you cannot use it directly -
select '�';
-- [6706] The string contains an untranslatable character.
select '1A'XC;
-- [6706] The string contains an untranslatable character.
If you are using version 14.0 or above you can generate it with the CHR function:
select chr(26);
If you're below version 14.0 you can generate it like this:
select translate (_unicode '05D0'XC using unicode_to_latin with error);
Once you have generated the character you can now use it with REPLACE or OTRANSLATE
create multiset table t (i int,txt varchar(100) character set latin) unique primary index (i);
insert into t (i,txt) values (1,translate ('Hello שלום world עולם' using unicode_to_latin with error));
select * from t;
-- Hello ���� world ����
select otranslate (txt,chr(26),'') from t;
-- Hello world
select otranslate (txt,translate (_unicode '05D0'XC using unicode_to_latin with error),'') from t;
-- Hello world
BTW, there are 2 versions for OTRANSLATE and OREPLACE:
The functions under syslib works with LATIN.
the functions under TD_SYSFNLIB works with UNICODE.
In addition to Dudu's excellent answer above, I wanted to add the following now that I've encountered the issue again and had more time to experiment. The following SELECT command produced an untranslatable character:
SELECT IDENTIFY FROM PROD_MAE_MNTNC_VW.SCHD_MNTNC;
IDENTIFY
24FEB1747659193DC330A163DCL�ORD
Trying to perform a REGEXP_REPLACE or OREPLACE directly on this character produces an error:
Failed [6706 : HY000] The string contains an untranslatable character.
I changed the CHARSET property in my Teradata connection from UTF8 to ASCII and I could now see the offending character, looks like a tab
IDENTIFY
Using the TRANSLATE_CHK command using this specific conversion succeeds and identifies the position of the offending character (Note that this does not work using the UTF8 charset):
TRANSLATE_CHK(IDENTIFY USING KANJI1_SBC_TO_UNICODE) AS BADCHAR
BADCHAR
28
Now this character can be dealt with using some CASE statements to remove the bad character and retain the remainder of the string:
CASE WHEN TRANSLATE_CHK(IDENTIFY USING KANJI1_SBC_TO_UNICODE) = 0 THEN IDENTIFY
ELSE SUBSTR(IDENTIFY, 1, TRANSLATE_CHK(IDENTIFY USING KANJI1_SBC_TO_UNICODE)-1)
END AS IDENTIFY
Hopes this helps someone out.
From within an Oracle 11g database, using SQL, I need to remove the following sequence of special characters from a string, i.e.
~!##$%^&*()_+=\{}[]:”;’<,>./?
If any of these characters exist within a string, except for these two characters, which I DO NOT want removed, i.e.: "|" and "-" then I would like them completely removed.
For example:
From: 'ABC(D E+FGH?/IJK LMN~OP' To: 'ABCD EFGHIJK LMNOP' after removal of special characters.
I have tried this small test which works for this sample, i.e:
select regexp_replace('abc+de)fg','\+|\)') from dual
but is there a better means of using my sequence of special characters above without doing this string pattern of '\+|\)' for every special character using Oracle SQL?
You can replace anything other than letters and space with empty string
[^a-zA-Z ]
here is online demo
As per below comments
I still need to keep the following two special characters within my string, i.e. "|" and "-".
Just exclude more
[^a-zA-Z|-]
Note: hyphen - should be in the starting or ending or escaped like \- because it has special meaning in the Character class to define a range.
For more info read about Character Classes or Character Sets
Consider using this regex replacement instead:
REGEXP_REPLACE('abc+de)fg', '[~!##$%^&*()_+=\\{}[\]:”;’<,>.\/?]', '')
The replacement will match any character from your list.
Here is a regex demo!
The regex to match your sequence of special characters is:
[]~!##$%^&*()_+=\{}[:”;’<,>./?]+
I feel you still missed to escape all regex-special characters.
To achieve that, go iteratively:
build a test-tring and start to build up your regex-string character by character to see if it removes what you expect to be removed.
If the latest character does not work you have to escape it.
That should do the trick.
SELECT TRANSLATE('~!##$%sdv^&*()_+=\dsv{}[]:”;’<,>dsvsdd./?', '~!##$%^&*()_+=\{}[]:”;’<,>./?',' ')
FROM dual;
result:
TRANSLATE
-------------
sdvdsvdsvsdd
SQL> select translate('abc+de#fg-hq!m', 'a+-#!', etc.) from dual;
TRANSLATE(
----------
abcdefghqm
I am using SQL Server 2008. I have a table with the following column:
sampleData (nvarchar(max))
The value for this column in some of these rows are lists formatted as follows:
["value1","value2","value3"]
I'm trying to write a simple query that will return all rows with lists formatted like this, by just detecting the opening bracket.
SELECT * from sampleTable where sampleData like '[%'
The above query doesn't work, because '[' is a special character. How can I escape the bracket so my query does what I want?
... like '[[]%'
You use [ ] to surround a special character (or range).
See the section "Using Wildcard Characters As Literals" in SQL Server LIKE
Note: You don't need to escape the closing bracket...
Aside from gbn's answer, the other method is to use the ESCAPE option:
SELECT * from sampleTable where sampleData like '\[%' ESCAPE '\'
See the documentation for details.
Just a further note here...
If you want to include the bracket (or other specials) within a set of characters, you only have the option of using ESCAPE (since you are already using the brackets to indicate the set).
Also you must specify the ESCAPE clause, since there is no default escape character (it isn't backslash by default as I first thought, coming from a C background).
E.g., if I want to pull out rows where a column contains anything outside of a set of 'acceptable' characters, for the sake of argument let's say alphanumerics... we might start with this:
SELECT * FROM MyTest WHERE MyCol LIKE '%[^a-zA-Z0-9]%'
So we are returning anything that has any character not in the list (due to the leading caret ^ character).
If we then want to add special characters in this set of acceptable characters, we cannot nest the brackets, so we must use an escape character, like this...
SELECT * FROM MyTest WHERE MyCol LIKE '%[^a-zA-Z0-9\[\]]%' ESCAPE '\'
Preceding the brackets (individually) with a backslash and indicating that we are using backslash for the escape character allows us to escape them within the functioning brackets indicating the set of characters.
Hi I am facing a problem with the like command in SQL,
I want to search for special characters within a column .
The special characters are a single quotation mark ' and { and }..
I have tried placing these special characters under [] but still it doesn't work for '
I have also used the except option but that was also of no help..
Waiting for a response soon
When you specify a value which has single quote, you need to double it.
SELECT *
FROM dbo.Northwind
WHERE Summary LIKE 'single''quotes%'
Try using this-
select * from <table> where <column> like '%''%'
SQL Server escaping is a pain because there are various ways to escape characters, each with different meaning and use case.
A single quote is escaped with another single quote: WHERE myfield LIKE '%''%'.
The general solution is to escape the special character like so:
SELECT .... WHERE my_column like '%\'%' ESCAPE '\'