certain fields in our database contain calculated functions e.g.
select lastname + ', ' + firstname as fullname from contact where contact.id =$contact$
when viewing the field the correct data is shown (i assume this is because when you open the record, the calculation is executed). however, the data is not 'stored' to the field, and therefore is null until the record is opened. is it possible to 'store' the result to the field, making it possible to search the data?
many thanks
james
EDIT
it is not possible for me to create computed_columns using our software.
the above field is a text feild where either 1) a user can manual type in the required data or 2) the database can generate the answer for you (but only whilst you are looking at the record). i know that if I run the following:
Select * from contact where contact.id =$contact$ for xml auto
i only get lastname, firstname - so i know that the fullname field does not retain its information.
If you are using computed columns in sql server, the column is already searchable regardless of whether the calculation result is stored or not. However, if you would like to make it so that the calculation is not run each time you read the row, you can change that under row properties in your Modify Table GUI.
Use the PERSISTED key word when you create the column
From BOL:
PERSISTED
Specifies that the SQL Server Database Engine will physically store the computed values in the table, and update the values when any other columns on which the computed column depends are updated. Marking a computed column as PERSISTED lets you create an index on a computed column that is deterministic, but not precise. For more information, see Creating Indexes on Computed Columns. Any computed columns that are used as partitioning columns of a partitioned table must be explicitly marked PERSISTED. computed_column_expression must be deterministic when PERSISTED is specified.
This isn't the way computed columns work in SQL Server, so I suspect this is something your client application is doing. How are you looking at the data when the value is computed correctly? Does it work when you view the data in SSMS?
Take a look at http://msdn.microsoft.com/en-us/library/ms191250(v=SQL.90).aspx to see how to create computed columns properly.
eg.
create table TestTable
(a int,
b int,
c as a + b)
insert into TestTable (a,b)
values (1,2)
select * from TestTable
where c = 3
This query is based on the computed column and it returns the row that's been inserted.
You need to use the PERSISTED option on a column when you use CREATE TABLE e.g.
CREATE TABLE test (col_a INT, col_b INT, col_c AS col_A * col_B PERSISTED)
Related
I want to add another row in my existing table and I'm a bit hesitant if I'm doing the right thing because it might skew the database. I have my script below and would like to hear your thoughts about it.
I want to add another row for 'Jane' in the table, which will be 'SKATING" in the ACT column.
Table: [Emp_table].[ACT].[LIST_EMP]
My script is:
INSERT INTO [Emp_table].[ACT].[LIST_EMP]
([ENTITY],[TYPE],[EMP_COD],[DATE],[LINE_NO],[ACT],[NAME])
VALUES
('REG','EMP','45233','2016-06-20 00:00:00:00','2','SKATING','JANE')
Will this do the trick?
Your statement looks ok. If the database has a problem with it (for example, due to a foreign key constraint violation), it will reject the statement.
If any of the fields in your table are numeric (and not varchar or char), just remove the quotes around the corresponding field. For example, if emp_cod and line_no are int, insert the following values instead:
('REG','EMP',45233,'2016-06-20 00:00:00:00',2,'SKATING','JANE')
Inserting records into a database has always been the most common reason why I've lost a lot of my hairs on my head!
SQL is great when it comes to SELECT or even UPDATEs but when it comes to INSERTs it's like someone from another planet came into the SQL standards commitee and managed to get their way of doing it implemented into the final SQL standard!
If your table does not have an automatic primary key that automatically gets generated on every insert, then you have to code it yourself to manage avoiding duplicates.
Start by writing a normal SELECT to see if the record(s) you're going to add don't already exist. But as Robert implied, your table may not have a primary key because it looks like a LOG table to me. So insert away!
If it does require to have a unique record everytime, then I strongly suggest you create a primary key for the table, either an auto generated one or a combination of your existing columns.
Assuming the first five combined columns make a unique key, this select will determine if your data you're inserting does not already exist...
SELECT COUNT(*) AS FoundRec FROM [Emp_table].[ACT].[LIST_EMP]
WHERE [ENTITY] = wsEntity AND [TYPE] = wsType AND [EMP_COD] = wsEmpCod AND [DATE] = wsDate AND [LINE_NO] = wsLineno
The wsXXX declarations, you will have to replace them with direct values or have them DECLAREd earlier in your script.
If you ran this alone and recieved a value of 1 or more, then the data exists already in your table, at least those 5 first columns. A true duplicate test will require you to test EVERY column in your table, but it should give you an idea.
In the INSERT, to do it all as one statement, you can do this ...
INSERT INTO [Emp_table].[ACT].[LIST_EMP]
([ENTITY],[TYPE],[EMP_COD],[DATE],[LINE_NO],[ACT],[NAME])
VALUES
('REG','EMP','45233','2016-06-20 00:00:00:00','2','SKATING','JANE')
WHERE (SELECT COUNT(*) AS FoundRec FROM [Emp_table].[ACT].[LIST_EMP]
WHERE [ENTITY] = wsEntity AND [TYPE] = wsType AND
[EMP_COD] = wsEmpCod AND [DATE] = wsDate AND
[LINE_NO] = wsLineno) = 0
Just replace the wsXXX variables with the values you want to insert.
I hope that made sense.
I have a table name: test
ID | Prefix | ACCID
ID's type is INTEGER which is selected from ID_SEQ
Prefix's type is VARCHAR(6)
ACCID is the combination of Prefix + ID
I want to auto-create ACCID when I insert the ID and Prefix value such as
INSERT INTO TEST (PREFIX) VALUES ('A01407V');
and the database store the ACCID as 'A01407V000001'
I create the sequence as
CREATE SEQUENCE ID_SEQ AS INT MAXVALUE 999999 CYCLE;
How to implement SQL statement to produce this result?
Thank you for all solutions and suggestions.
Ps. I use Apache Derby as my SQL Server
As documented in the manual, Derby supports generated columns (since Version 10.5)
The real problem is the formatting of a number with leading zeros as Derby has no function for that.
If you really, really think you need to store a value that can always be determined by the values already stored in the table, you can use something like this:
create table test
(
id integer,
prefix varchar(6),
accid generated always as (prefix||substr('000000', 1, 6 - length(rtrim(char(id))))||rtrim(char(id)))
);
The expression substr('000000', 1, 6 - length(rtrim(char(id))))||rtrim(char(id)) is just a complicated way to format a the ID with leading zeros.
I would highly recommend to not store this value though. It is much cleaner to create a view that shows this value if you do need access to this in SQL.
You can use COMPUTED Column.
Is a computed column that is based on some other column in the table. We can physically save the data of the column/ or not. Table will automatically update the value of this column.
syntax:
columnname AS expression [PERSISTED]
--PERSISTED will make it physically saved, otherwise it will be calculated every time.
We can create indexes on computed columns.
You add, The following in the table CREATE Script
ACCID AS Prefix + CAST(ID AS CHAR(6)) [PERSISTED]
I would like to be able to add columns to a table with cells who's values are computed by need at 'querytime' when (possibly) selecting over them.
Are there some established ways of doing this?
EDIT: Okay I can do without the 'add columns'. What I want is to make a select query which searches some (if they exist) rows with all needed values computed (some function) and also fills in some of the rows which does not have all needed values computed. So each query would do it's part in extending the data a bit.
(Some columns would start out as null values or similar)
I guess I'll do the extending part first and the query after
You use select expression, especially if you don't plan to store the calculation results, or they are dependant on more than one table. An example, as simple as it could be:
SELECT id, (id+1) as next_id FROM table;
What type of database are you asking for? If it is SQL Server then you can use the computed columns by using the AS syntax.
Eg:
create table Test
(
Id int identity(1,1),
col1 varchar(2) default 'NO',
col2 as col1 + ' - Why?'
)
go
insert into Test
default values
go
select * from Test
drop table Test
In the SQL world it's usually expensive to add a column to an existing table so I'd advise against it. Maybe you can manage with something like this:
SELECT OrderID,
ProductID,
UnitPrice*Quantity AS "Regular Price",
UnitPrice*Quantity-UnitPrice*Quantity*Discount AS "Price After Discount"
FROM order_details;
If you really insist on adding a new column, you could go for something like (not tested):
ALTER TABLE order_details ADD column_name datatype
UPDATE order_details SET column_name = UnitPrice+1
You basically ALTER TABLE to add the new column, then perform an UPDATE operation on all the table to set the value of the newly added column.
I want to make filtration on a column after selecting a specific value of another column in the same table, I tried to use #... special character followed by the column's name to get the address of this value.
My SQL statement is like the following :
SELECT ATTRIBUTE FROM TABLE WHERE FIELD = '#FIELDNAME';
If I used a specific value instead of #FIELDNAME, it will work properly but it will be static but I need it to be dynamic based on the selected value.
Create another table which will have the list of values that are in the FIELDNAME and give each record a unique id ,then retrieve the value depending on what you have selected by the name of the new table's field preceded by '#...'
I don't know if that what are you looking for, please let me know.
If no triggers are allowed, do you have any date/time column in the table? Is it possible to have that extra column anyway to see the time of a newly inserted row?
You may have to check the lastest row entered, save its field value into a variable. Then do the select based on the variable value.
Based on the vague last row id you could try the following (it's not pretty). But again, if you have date/time that's more accurate.
select attribute from table
where field = (select field from table
where rowid =(select max(rowid) from table))
;
upate
Do you have the priviledge to set up your insert command as below:
insert into table (id, col1, col2,...) values (1,'something', 'something',...)
returning id into variable; -- you may either save field or id depending on your table
Then you may use this variable to select the records you want.
I have a table in a database that represents dates textually (i.e. "2008-11-09") and I would like to replace them with the UNIX timestamp. However, I don't think that MySQL is capable of doing the conversion on its own, so I'd like to write a little script to do the conversion. The way I can think to do it involves getting all the records in the table, iterating through them, and updating the database records. However, with no primary key, I can't easily get the exact record I need to update.
Is there a way to get MySQL to assign temporary IDs to records during a SELECT so that I refer back to them when doing UPDATEs?
Does this not do it?
UPDATE
MyTable
SET
MyTimeStamp = UNIX_TIMESTAMP(MyDateTime);
If for some reason you do have to iterate (the other answers cover the situation where you don't), I can think of two ways to do it (these aren't MySQL-specific):
Add a column to the table that's an auto-assigned number. Use that as the PK for your updates, then drop the column afterwards (or just keep it around for future use).
In a table with no defined PK, as long as there are no exact duplicate rows, you can use the entire row as a composite PK; just use every column in the row as your distinguishing characteristic. i.e., if the table has 3 columns, "name", "address", and "updated", do the following:
UPDATE mytable SET updated = [timestamp value] WHERE name = [name] AND address = [address] AND timestamp = [old timestamp]
Many data access frameworks use this exact strategy to implement optimistic concurrency.
No, you should be able to do this with a single update statement. If all of the dates are yyyy-mm-dd and they are just stored in some sort of text column instead of DATETIME, you can just move the data over. SQL would be like:
ALTER TABLE t ADD COLUMN dates DATETIME;
UPDATE t set t.dates=t.olddate;
This shouldn't be dependent on a PK because MySQL can scan through each row in the table. The only time PK's become an issue is if you need to update a single row, but the row may not be unique.
You can generate values during a SELECT using the MySQL user variables feature, but these values do not refer to the row; they're temporary parts of the result set only. You can't use them in UPDATE statements.
SET #v := 0;
SELECT #v:=#v+1, * FROM mytable;
Here's how I'd solve the problem. You're going to have to create another column for your UNIX timestamps anyway, so you can add it first. Then convert the values in the old datetime column to the UNIX timestamp and place it in the new column. Then drop the old textual datetime column.
ALTER TABLE mytable ADD COLUMN unix_timestamp INT UNSIGNED NOT NULL DEFAULT 0;
UPDATE mytable
SET unix_timestamp = UNIX_TIMESTAMP( STR_TO_DATE( text_timestamp, '%Y-%m-%d' ) );
ALTER TABLE mytable DROP COLUMN text_timestamp;
Of course you should confirm that the conversion has been done correctly before you drop the old column!
See UNIX_TIMESTAMP() and STR_TO_DATE()