I trying to run Selenium grid and node using Jenkins but the CMD windows always closes after executing the steps
i am running the below code in Jenkins Window Batch Command
cd "C:\TapsiumACSS\Grid3.9"
start Hub.bat
I need the CMD window to be opened
You can create a shortcut of the bat file and under properties in the target section you have to add &PAUSE
This will pause the command prompt until an user input is done.
Just a opinion, Not a good idea to use Jenkins and ask the user to do something as that defeats the whole automation aspect... Instead copy the selenium results into a html or text file which can be viewed later :)
P.S. you will have to refer to this bat file location in Jenkins i.e. the shortcut location
Hope it helps :)
I have a vb.net application that runs cmd.exe as the following:
Dim Port1 = CreateObject("WScript.Shell")
Port1.Run("cmd.exe")
Port1.Sendkeys("telnet ip address")
Port1.Sendkeys("{Enter}")
System.Threading.Thread.Sleep(6000)
When the cmd runs the sendkeys a error shows
"'telnet' is not recognized as an internal or external command,
operable program or batch file."
I closed the cmd window, opened another cmd, and typed in the command with not problems.
I need cmd to run in the vb.net and not as a separate file.
Running the vb.net in Microsoft visual studio Ultimate 2013.
Update: Can anyone tell me why it is doing the same thing when i move the app to another computer and try to run it?
You have to enable telnet on the computer by going to start > control panel > programs and features > turn windows feature on or off > check telnet client or typing optionalfeatures in run and checking telnet client. The command should execute successfully after that.
Either Telnet is not installed on your computer (it's not installed by default on any modern Windows versions as far as I know), or it its installation directory not in the PATH environment variable.
Either add it's install directory to PATH, or specify the full path to telnet.exe in the arguments to cmd.exe.
CMD runs commands based off of System32 and .bat(batch) or .exe. You would have to create a .exe or a .bat and place it into System32 in order for the command to work.
Here is the related error its showing:
java.exe is not a recognized file as an internal or external command,
operable or external command
errorlevel=9009
i was getting the same error on WIndows 8.1(64 bit) and checked java path but it was ok
so i just run my jmeter.bat with Run as Administrator and it worked for me
Many operating systems have an environment variable such as PATH that contains a list of directories (or folders) to be searched when looking for a command to execute. Commands that can be found via the PATH are commonly called external commands. The program that reads the command line or the batch file and invoked the commands may have a number of built in commands, these are commonly called internal commands.
I suggest you examine the PATH (or equivalent) set when your java command executes from the command line and also when execution is attempted from the batch file. Compare the two and make sure the directory containing your java.exe is in the PATH.
Does not work with Java 9 beta:
Running:
C:\java -version
Gives:
java version "9-ea"
Just go into command line and run:
java -jar ApacheJMeter.jar
Set the correct Java Path (installed in your system) in Computer -> Advanced System settings -> Environment Variables -> Ok -> System Variables -> Path
I got the same issue and resolved by following the above steps.
I tried everything, this eventually worked.
Within System Variables:
PATH = "C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jdk1.8.0_101\bin"
May help someone.
This error occurs due to the path has not been set properly.
Either you can set it in environmental varialables or right click jmeter .bat file,choose edit set the path their,for reference see the jmeter.apache.org user manuals.
For me, my Java path has a space in it and jmeter said it can't find Java
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home
.. I looked at the jmeter.sh script and saw it got the path from "Plugin-Ins" .. onward. I tried just commenting out the exit command after that check in the script .. and then I was able to run jmeter.
So apparently the validation logic has a bug, where the error message about can't find java is in fact not true (if Java is indeed set up correctly), so it can be ignored.
For windows 8.1 Users:
Error when trying to run jmeter.bat
Error message:
Not able to find Java executable or version. Please check your Java installation. errorlevel=2
Press any Key to continue
Resolution:
Right Click jmeter.bat and Run as Administrator.
This worked for me, hope this helps. Good luck
Set the correct JM_LAUNCH variable to java.exe
For Windows XP users set Java environment by following the steps here:
http://www.tutorialspoint.com/jmeter/jmeter_environment.htm
Note the path depends on your installed JDK.
And download the file from:
https://svn.apache.org/repos/asf/jmeter/trunk/bin/jmeter.bat
Then replace your jmeter.bat with the downloaded file.
If you have installed Java and still you get this error, please set the java_home path to below using typing below command in terminal:
export JAVA_HOME="/Library/InternetPlugIns/JavaAppletPlugin.plugin/Contents/Home"
Since I run many versions of Java.. I modified jmeter.bat.
rem JM_START - set this to "start" to launch JMeter in a separate window
rem this is used by the jmeterw.cmd script.
rem
rem =====================================================
setlocal
rem Minimal version to run JMeter
set MINIMAL_VERSION=1.8.0
set PATH=%PATH%;C:\Program Files (x86)\IBM\Java80\jre\bin <<< add This line to jmeter.bat
Copied the JAVA executable from Installed version of Java from C:\Program FilesJava\jdk1.8.0_191\bin and pasted in the folder where the jmeter bat resides and it worked for me.
Not exactly the same issue but somebody might find it helpful
Do not double click jmeter.bat but instead ApacheJMeter.jar in the same directory
For me jmeter.bat run but for a brief moment closing almost immediately and not prompting any error. Above workaround allowed me to start working
if JAVA -version shows as blank or empty in the command prompt (CMD) then you need to clear the all java paths in environment variable and again add JAVA_HOME=C:\Program Files\Java\jdk-11.0.15.1
path= C:\Program Files\Java\jdk-11.0.15.1\bin;
if you see C:\Program Files\Common Files\Oracle\Java\javapath; like this remove this
and try in new CMD prompt then Java -version will work.
A problem that has been plaguing me for nearly a week now.
I am trying to get an install of IIS to take place through the command line in VB. I understand that i need to be setting up an Unattended xml script to call, but here is a fundamental bit that is confusing me:
If i run the command : ' start /w pkgmgr /iu:IIS-WebServerRole;IIS-WebServer; ' it executes perfectly within CMD.exe.
If i add the command to a batch file and run the batch file, it runs perfectly.
If i call the command using : Dim myProcess As Process = Process.Start("cmd.exe", "/k start /w pkgmgr /iu:IIS-WebServerRole;IIS-WebServer;"), then it fails with an error of:
////////////////////////////////////////////////////////////////////////////////////////////////////////////
Operation failed with 0x8007000B ////
////
An attempt was made to run the program in an incorrect format ////
////////////////////////////////////////////////////////////////////////////////////////////////////////
If i call the batch file mentioned earlier, then i get the exact same error.
How can it work perfectly with the two first examples but fail when it is called through VB?
Thanks for any help!
Your VB.NET program is very likely to be running in 32-bit mode and will start the 32-bit version of cmd.exe. The one from c:\windows\syswow64 instead of the one from c:\windows\system32 that you used before. Getting BadImageFormatException starts to become likely.
Project + Properties, Compile tab, set the Target CPU to AnyCPU and untick the "Prefer 32-bit" option. On older versions of VS click the Advanced Compile Options button to get to the setting.
I'm creating an application that downloads some applications (like FireFox, WinRar, RealPlayer) and then install them silently using Shell command. This is the code:
My.Computer.Network.DownloadFile("URL", "path\file.exe")
Shell("path\file.exe /s")
The problem is that the shell command starts before Download Is completed, so I get a "file not found" error. So my questions are:
How can I execute Shell command after the download is completed?
Can I use process.start with S parameter instead of Shell command?
This should do the trick to download the file and wait until its over:
Dim wc As WebClient = New WebClient()
wc.DownloadFile(sURL, sFile)