I have a problem with Java 1.5.0 for AIX. The error happens just when I log on with specific user on AIX (myuser). When I log on with other user java works ok.
The error come up even when I executed just "java -version" or simply "java" (of course, without quoting). I've tried executing it with the full path: /usr/java5/jre/bin/java but still fails.
There was installed the version 1.4 of java on system too. So the $PATH variable for the user contained /usr/java14/jre/bin, but I removed that value, I even uninstalled that version of java (1.4) so that just java 5 exists on the system, but the error continues.
If I execute "java -fullversion" it doesn't crash.
This is part of the error (the full output is very long):
JVMJ9VM011W Unable to load j9dmp23: No such file or directory
JVMJ9VM011W Unable to load j9jit23: No such file or directory
JVMJ9VM011W Unable to load j9gc23: No such file or directory
JVMJ9VM011W Unable to load j9vrb23: No such file or directory
Unhandled exception
Type=Illegal instruction vmState=0x00000000
J9Generic_Signal_Number=00000010 Signal_Number=00000004 Error_Value=00000000
Signal_Code=0000001e
Handler1=F0719CC8 Handler2=F0714F5C
.....
Target=2_30_20091103_45935_bHdSMr (AIX 5.3)
CPU=ppc (4 logical CPUs) (0x7d0000000 RAM)
JavaVMInitArgs.nOptions=14:
-Xjcl:jclscar_23
-Dcom.ibm.oti.vm.bootstrap.library.path=/usr/java5/jre/bin
-Dsun.boot.library.path=/usr/java5/jre/bin
-Djava.library.path=/usr/java5/jre/bin:/usr/java5/jre/bin:/usr/java5/jre/bin/classic:/usr/java5/jre/bin:/sqllib/lib:/home/myuser/comm:/home/myuser/sys:/home/myuser/bin:/db2util/db2adm/sqllib/lib64:/usr/java5/jre/bin/j9vm:/usr/lib
-Djava.home=/usr/java5/jre
-Djava.ext.dirs=/usr/java5/jre/lib/ext
-Duser.dir=/home/myuser
_j2se_j9=70912 (extra info: F070EA2C)
-Xdump
vfprintf (extra info: 300017A4)
-Dinvokedviajava
-Djava.class.path=/db2util/db2adm/sqllib/java/db2java.zip:/db2util/db2adm/sqllib/java/db2jcc.jar:/db2util/db2adm/sqllib/java/sqlj.zip:/db2util/db2adm/sqllib/function:/db2util/db2adm/sqllib/java/db2jcc_license_cu.jar:.
vfprintf
_port_library (extra info: F070EE30)
Note: "Enable full CORE dump" in smit is set to FALSE and as a result there will be limited threading information in core file.
Note: dump may be truncated if "ulimit -c" is set too low
Generated system dump: {default OS core name}
(no Thread object associated with thread)
(no Thread object associated with thread)
Unhandled exception in signal handler
ksh: 2179192 IOT/Abort trap(coredump)
I found the error. The problem is a line on the .profile which sets the environment variable LIBPATH:
export LIBPATH=/home/myuser/sys
I deleted that line in the .profile and java worked.
Related
I had a question regarding karate.robot do we have any method or function to shut down or close or quit Karate.robot session like driver. quit or close?
it seems some threads are occupied getting following error many times:
#
# A fatal error has been detected by the Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0000000065a03e06, pid=11236,
tid=8836
#
# JRE version: Java(TM) SE Runtime Environment (8.0_25-b18) (build 1.8.0_25-b18)
# Java VM: Java HotSpot(TM) 64-Bit Server VM (25.25-b02 mixed mode windows-amd64
compressed oops)
# Problematic frame:
# V [jvm.dll+0x4c3e06]
#
# Failed to write core dump. Minidumps are not enabled by default on client versions
of Windows
#
[thread 6836 also had an error]
[.error occurred during error reporting , id 0xc0000005]
#
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
#
Dll Process Attached
Loading jawt.dll
Dll Process Detach
Process finished with exit code 1
No, we don't see a need. You typically start the Robot instance and it stays up until the end of your entire suite. Maybe you should try install the JDK 64-bit or 32-bit.
You are welcome to contribute code to improve anything if required. So far no one has reported any problems like this. Maybe you are trying to do things in parallel threads which is not supported. Provide a way to replicate if you can: https://github.com/intuit/karate/wiki/How-to-Submit-an-Issue
EDIT - one area you can help us investigate is if we need to do more to release JNA resources after a Scenario in this method.
Also see this answer: Java JNA: JRE crashes after application completes
Iam facing JVM Crash cosistently while enabling hotdeploy (USING below java options on starting up JAVA_OPTS -Xmx4096m -XX:MetaspaceSize=512m -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=crash -XX:ThreadStackSize=512 -XX:+UseConcMarkSweepGC -XX:ParallelGCThreads=5 -XX:NewRatio=2 -XX:+UnlockDiagnosticVMOptions -XX:-UseLoopPredicate -Xdebug -Xrunjdwp:transport=dt_socket,address=$DEBUG_PORT,server=y,suspend=n -XX:NewRatio=2 -Dspringloaded.synchronize=true JAVA_OPTS=`echo $JAVA_OPTS -Dspringloaded.synchronize=true -javaagent:springloaded-1.2.1.jar -noverify
)
Environment : JDK 1.8 U 66, RHEL 6.7
#
# A fatal error has been detected by the Java Runtime Environment:
#
# SIGSEGV (0xb) at pc=0x00007faee9a1e27c, pid=27208, tid=140379827795712
#
# JRE version: Java(TM) SE Runtime Environment (8.0_66-b17) (build 1.8.0_66-b17)
# Java VM: Java HotSpot(TM) 64-Bit Server VM (25.66-b17 mixed mode linux-amd64 )
# Problematic frame:
# V [libjvm.so+0x35027c] Canonicalizer::do_If(If*)+0x1c
#
# Core dump written. Default location: core.27208
#
# An error report file with more information is saved as:
# hs_err_pid27208.log
# [ timer expired, abort... ]
I've noticed both -javaagent and -noverify in Java options list.
It looks like springloaded agent generates invalid bytecode, while the bytecode verification is explicitly turned off. No surprise, this may lead to unpredictable results including JVM crash.
This is not a JVM problem, but most likely a bug in springloaded agent. Try to remove -noverify option.
-XX:-TieredCompilation may also work around this particular problem, but don't expect application to work correctly if the bytecode fails to pass verification. It's better to stay away from the buggy agent libraries.
4.2.1 Crash in HotSpot Compiler Thread or Compiled Code
If the fatal error log indicates that the crash occurred in a compiler
thread, then it is possible (but not always the case) that you have
encountered a compiler bug. Similarly, if the crash is in compiled
code then it is possible that the compiler has generated incorrect
code.
In the case of the HotSpot Client VM (-client option), the compiler
thread appears in the error log as CompilerThread0. With the HotSpot
Server VM there are multiple compiler threads and these appear in the
error log file as CompilerThread0, CompilerThread1, and AdapterThread.
Below is a fragment of an error log for a compiler bug that was
encountered and fixed during the development of J2SE 5.0. The log file
shows that the HotSpot Server VM is used and the crash occurred in
CompilerThread1. In addition, the log file shows that the Current
CompileTask was the compilation of the java.lang.Thread.setPriority
method.
An unexpected error has been detected by HotSpot Virtual Machine:
:
Java VM: Java HotSpot(TM) Server VM (1.5-internal-debug mixed mode) :
--------------- T H R E A D ---------------
Current thread (0x001e9350): JavaThread "CompilerThread1" daemon
[_thread_in_vm, id=20]
Stack: [0xb2500000,0xb2580000), sp=0xb257e500, free space=505k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code,
C=native code) V [libjvm.so+0xc3b13c] :
Current CompileTask: opto: 11 java.lang.Thread.setPriority(I)V
(53 bytes)
--------------- P R O C E S S ---------------
Java Threads: ( => current thread ) 0x00229930 JavaThread "Low
Memory Detector" daemon [_thread_blocked, id=21]
=>0x001e9350 JavaThread "CompilerThread1" daemon [_thread_in_vm, id=20] :
In this case there are two potential workarounds:
The brute force approach: change the configuration so that the application is run with the -client option to specify the HotSpot
Client VM.
Assume that the bug only occurs during the compilation of the setPriority method and exclude this method from compilation.
The first approach (to use the -client option) might be trivial to
configure in some environments. In others, it might be more difficult
if the configuration is complex or if the command line to configure
the VM is not readily accessible. In general, switching from the
HotSpot Server VM to the HotSpot Client VM also reduces the peak
performance of an application. Depending on the environment, this
might be acceptable until the actual issue is diagnosed and fixed.
The second approach (exclude the method from compilation) requires
creating the file .hotspot_compiler in the working directory of the
application. Below is an example of this file:
exclude java/lang/Thread setPriority
In general the format of this file is exclude CLASS METHOD, where
CLASS is the class (fully qualified with the package name) and METHOD
is the name of the method. Constructor methods are specified as
and static initializers are specified as .
Note - The .hotspot_compiler file is an unsupported interface. It is
documented here solely for the purposes of troubleshooting and finding
a temporary workaround.
Once the application is restarted, the compiler will not attempt to
compile any of the methods listed as excluded in the .hotspot_compiler
file. In some cases this can provide temporary relief until the root
cause of the crash is diagnosed and the bug is fixed.
In order to verify that the HotSpot VM correctly located and processed
the .hotspot_compiler file that is shown in the example above, look
for the following log information at runtime. Note that the file name
separator is a dot, not a slash.
Excluding compile: java.lang.Thread::setPriority
Source
Agree with #apangin, In the program you are doing bytecode intrumentation (-agent) but specifies -noverify. When verification is turned off, you may end up such crashes.
You should not use -noverify or -Xverify:none during byte code intrumentation.
For those of you unfamiliar with bytecode verification, it is simply part of the JVM's classloading process that checks the code for certain dangerous and disallowed behavior. You can (but shouldn't) disable this protection on many JVMs by adding -Xverify:none or -noverify to the Java command line. https://blogs.oracle.com/buck/entry/never_disable_bytecode_verification_in
I am able to decompile the file using "advanced apktool" but when i use apktool alone via command line I get this error:
I: Baksmaling... I: Loading resource table... Exception in thread "main" brut.androlib.AndrolibException: Could not decode arsc file at brut.androlib.res.decoder.ARSCDecoder.decode(ARSCDecoder.java:55) at brut.androlib.res.AndrolibResources.getResPackagesFromApk(AndrolibResources.java:315) at brut.androlib.res.AndrolibResources.loadMainPkg(AndrolibResources.java:50) at brut.androlib.res.AndrolibResources.getResTable(AndrolibResources.java:43) at brut.androlib.Androlib.getResTable(Androlib.java:44) at brut.androlib.ApkDecoder.getResTable(ApkDecoder.java:148) at brut.androlib.ApkDecoder.decode(ApkDecoder.java:98) at brut.apktool.Main.cmdDecode(Main.java:128) at brut.apktool.Main.main(Main.java:65) Caused by: java.io.IOException: Expected: 0x001c0001, got: 0x00000000 at brut.util.ExtDataInput.skipCheckInt(ExtDataInput.java:48) at brut.androlib.res.decoder.StringBlock.read(StringBlock.java:45) at brut.androlib.res.decoder.ARSCDecoder.readPackage(ARSCDecoder.java:97) at brut.androlib.res.decoder.ARSCDecoder.readTable(ARSCDecoder.java:82) at brut.androlib.res.decoder.ARSCDecoder.decode(ARSCDecoder.java:48) ... 8 more" My apk does have a res folder i can see it using dexindexor app on my phone and it decompiled using other decompilers (that use apktool) its just apktool doesn't decompile it on its own properly.
Its the same when i try a different comnputers. I'm using winxp 32 jre 1.7, win7 64 jre 1.8.
Why is this happenning and how do I fix it?
Currently we are encountering an problem, our java application can run smoothly with JRE6, but for JRE7, it will report "Could not create the Java virtual machine" sometimes and failed to start program. we have "-Xmx1024m" option in the launch command line.
after searching in google, people suggest check the max heap size that can be requested in PC. then I tried below ones.
for JRE6,
C:\Users\joey>java -Xmx1214m -version
java version "1.6.0_45"
Java(TM) SE Runtime Environment (build 1.6.0_45-b06)
Java HotSpot(TM) Client VM (build 20.45-b01, mixed mode)
C:\Users\joey>java -Xmx1215m -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
for JRE7,
D:\Program Files\Java\jre7\bin>java.exe -Xmx930m -version
java version "1.7.0_51"
Java(TM) SE Runtime Environment (build 1.7.0_51-b13)
Java HotSpot(TM) Client VM (build 24.51-b03, mixed mode)
D:\Program Files\Java\jre7\bin>java.exe -Xmx931m -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
And when i close most processes in PC and free memory to 2.5 GB, for JRE7, it will succeed with 1094m, like below.
D:\Program Files\Java\jre7\bin>java.exe -Xmx1094m -version
java version "1.7.0_51"
Java(TM) SE Runtime Environment (build 1.7.0_51-b13)
Java HotSpot(TM) Client VM (build 24.51-b03, mixed mode)
D:\Program Files\Java\jre7\bin>java.exe -Xmx1095m -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
It seems that the max heap size that JVM can request is related with system available memory size, does someone know the exact relationship?
Is there some way to enable tracing logs of JRE when creating JVM?
Thank you!
Regards,
Joey
I faced the same issue on various Windows OS flavous (Win7, Win2008R2) while having enough free RAM (3-5G), when switching from jre6_20 to jre7_51 (both 32 bit VMs)
Using vm args -Xmx1300m and -XX:MaxPermSize=256m on java 6 the VM is able to start. However, with java7 I had to lower down startup max memory (xmx with 100m or permgen with 100m) in order to be able to start VM.
The interesting part is this: if I restarted my box, the jvm 7 started with original vm args (-Xmx1300m and -XX:MaxPermSize=256m) so I suspect the root cause might be the OS with JVM combination.
I know that on Windows OSes - 32 bit VMs expect to have a single large chunk of memory, but cannot use the maximum process memory size will range from 1.4G to 1.6G (because of additional constraints)
Any troubleshooting pointers? Oracle does not provide any information in java7 release notes (or I could not spot those)
I have a similar problem Windows 7 64bit, no JAVA_HOME set nor in PATH
This fails
"C:\Program Files (x86)\Java\jdk1.7.0_51\bin\java.exe" -Xms32m -Xmx1024m -XX:MaxPermSize=256m -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
This works
"C:\Program Files (x86)\Java\jdk1.7.0_51\bin\java.exe" -Xms32m -Xmx512m -XX:MaxPermSize=256m -version
This also works (I can recompile or not, doesn't make a difference
"C:\Program Files (x86)\Java\jdk1.6.0_45\bin\java.exe" -Xms32m -Xmx1024m -XX:MaxPermSize=256m -version
I tried turning off windows DEP, didnt make a difference
http://windows.microsoft.com/en-us/windows-vista/data-execution-prevention-frequently-asked-questions
I twiddled with the Virtual Memory settings , changed from allowing Windows to Manage
http://windows.microsoft.com/en-us/windows/change-virtual-memory-size#1TC=windows-7
I upped the Virual Memory in windows and it allowed it to work, sometimes...(with xmx1024)
Nothing else is consuming a lot of resources (memory, etc, I did have oracle database running locally, but shut it down)
"C:\Program Files (x86)\Java\jdk1.7.0_51\bin\java.exe" -Xms32m -Xmx1024m -XX:MaxPermSize=256m -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
This works
"C:\Program Files (x86)\Java\jdk1.7.0_51\bin\java.exe" -Xms32m -Xmx900m -XX:MaxPermSize=256m -version
This fails
U:>"C:\Program Files (x86)\Java\jdk1.7.0_51\bin\java.exe" -Xms32m -Xmx2024m -XX
:MaxPermSize=256m -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
New version , works even with letting Windows Managage the Virtual Memory and DEP turned on
"C:\Program Files (x86)\Java\jdk1.7.0_65\bin\java.exe" -Xms32m -Xmx1024m -XX:MaxPermSize=256m -version
I want to increase the heap size of my Glassfish. For that, I know that I can go up to 4GB:
java -Xmx4000M -version
java version "1.6.0_26"
Java(TM) SE Runtime Environment (build 1.6.0_26-b03-384-10M3425)
Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02-384, mixed mode)
I tried to set in domain.xml file the -Xmx to 2GB:
<jvm-options>-Xmx2000m</jvm-options>
But I am getting the following error:
asadmin> start-domain
Waiting for ... to start .Error starting domain ...
The server exited prematurely with exit code 1.
Before it died, it produced the following output:
Error occurred during initialization of VM
The size of the object heap + VM data exceeds the maximum representable size
launchctl bsexec failed: Inappropriate ioctl for device
Launching the command with -v option gives this:
12 oct. 2011 11:46:34 com.sun.enterprise.admin.launcher.GFLauncherLogger info
INFO: JVM invocation command line:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
-XX:+UnlockDiagnosticVMOptions
-XX:MaxPermSize=512m
-XX:NewRatio=2
-XX:+CMSClassUnloadingEnabled
-Xmx2000m
-Xms1000m
...
12 oct. 2011 11:46:35 com.sun.enterprise.admin.launcher.GFLauncherLogger info
INFO: Successfully launched in 45 msec.
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Command start-domain failed.
I found the problem. For some reasons which I do not understand, the "-d32" argument was passed in the command, asking to start in 32 bits mode. When adding
<jvm-options>-d64</jvm-options>
to the domain.xml file, glassfish starts. Please note that this option is not present by default in the file.
you must be using a different Java install when doing the "-version" and from within GlassFish. I can reproduce the same error with the default "java" in Mac OS' path but not when using an absolute path :
% /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java -Xmx2300m -version
java version "1.6.0_26"
Java(TM) SE Runtime Environment (build 1.6.0_26-b03-383-11A511)
Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02-383, mixed mode)
% java -Xmx2300m -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Could it be that you don't have enough disk space on your system? Reserving 4GB of RAM may require MAC OS to expand swap space, and you may not have the disk space to do this. Unfortunately, this has burned me before :-/