Add missing file with msp patch - wix

I created an installer, deployed to our test environment and got an error due to a missing dll (it was not included in the wsx file). Is it possible to create a MSP patch to ship the missing dll or is it better to simply create a whole new installer?
I tried following various examples but I keep getting this error:
DEBUG: Error 2356: Couldn't locate cabinet in stream: media1.cab.

A patch can do anything an updated MSI can do, but it is merely a packaging and delivery mechanism that delivers an update in a more compact way. Hence you must actually create a full new version of your setup to be able to then package this new update as a patch.
Important: spend no time at all testing a patch before the full upgrade is working properly. This is a complete waste of time. It creates only mysterious errors and is a very common real-world time drain.
Unless your previous setup has gone to production and hence is "out in the wild", I wouldn't waste my time with a patch. Patches require a lot of time to create and even more time to test - there is a lot of added risk and complexity, and it is only intended to be a convenient way to deliver small updates such as what you describe without having to distribute a potentially huge, new MSI file. It is not common to use patches for UAT or QA testing unless your product is really huge and takes ages to install.
Personally I feel that MSI has failed entirely when it comes to patching. It should be an easy to use, value added feature, but it has become a hugely complicated, problematic issue in its own right.

Yes, you can add a missing file through a patch. Perhaps this article will help: http://wix.sourceforge.net/manual-wix2/patch_building.htm
When creating a patch you should always modify your existing installer. You don't create a new installer from scratch. Also, never remove resources from the new version. For a patch you should either modify or add resources.
Regarding error 2356, it seems like the original installation is somehow corrupted. You can try repairing the old version before applying the patch on it.

Related

Disable repair mode and upgrades in wix installer

We have a unique requirement to create an msi using wix,the catch is that the msi must support multiple instance installation. User should be able to use the msi to install the product more than once on a particular system, so in order to achieve this we should disable repair mode and upgrades in msi, so literally each invocation of msi should be treated as fresh install.
Is the above requirement technically feasible with Wix? I am aware that having unique product code and package code for every invocation of msi will treat the installation as fresh install. Can this be achieved using a wrapper around the msi?
You could do this with a wrapper around the MSI. In general your wrapper program would start with the base MSI, alter the ProductCode and PackageCode using the Windows Installer APIs, copy this MSI to a location on the system then install it from there.
I say "copy and install" because it's futile trying to disable repair - it's too baked into the architecture of Windows Installer. If you have each separate MSI product cached somewhere then repair will work using that unique MSI, and it also means that you could modify as well. Repair is too unpredictable to completely prevent. Any shared files can trigger repair from other installed products that share them. What do clients do if they accidentally delete files or registry entries? And there's this about keeping the source MSI available, although the list of reasons doesn't come with a lot of explanation, Rule 31:
https://blogs.msdn.microsoft.com/windows_installer_team/2006/05/24/tao-of-the-windows-installer-part-3/
There are a lot of other issue that aren't mentioned, so it's not clear if you care about patches and maintenance in general, about multiple entries in Programs/Features (that you could suppress, but how do you uninstall?) and so on. It's also not clear that each of these separate installs don't conflict with each other in any way, such as common files/registry entries, service names, files being installed in the same location with the same name.
Before sending you to the MSI SDK I should add that I dislike this instance transform concept myself, and have not used it in practice. It might be that I have become a grumpy old man! :-).
MSINEWINSTANCE: Please investigate the MSINEWINSTANCE property and read up on the MSI SDK topic: "Installing Multiple Instances of Products and Patches". And here is perhaps a better example - more practically oriented.
Also some context on why I am not too keen on this feature. Carolyn Napier was on the original MSI team - this is straight from the horse's mouth as they say.
I know some people claim success with these instance transforms (Chris Painter might be able to illuminate my claims here), but I'd rather virtualize in scenarios such as these. Please see this age-old post from serverfault.com: I want to install an MSI twice (please skim all the other answers in that "thread" too).
APP-V: I have almost zero App-V experience, but my guess is that this is what you should try to convince your manager to spend some time on investigating. Maybe call in some favors and talk to guys who are operative in current deployment. They always have the current prevailing prejudice to report - with the tricks that make things work in the real world.
Great if you can let us know how you end up solving the problem.
Disable Repair & Modify: And for the record: disabling repair and modify (buttons only) can be done by setting the ARPNOMODIFY and ARPNOREPAIR properties. But this is not what you are looking for to allow multiple instance installations. MSI is not easily fooled and knows what you have installed and when - no reason to waste time testing these "options". All these two properties do is to hide or disable the modify and repair buttons - yields nothing you need apart from that.

WiX: is there a way to tell what file isn't being overwritten in a major upgrade?

I have a big program in WiX that uses a bunch of MSIs, C# custom action programs, UIs, bootstrapper, you name it, it's there.
I'm having this problem: when I run a major upgrade, the previous version isn't being erased. That is, if I upgrade from version 1.0.0.x to 1.1.0.x, Programs & Features shows that both versions are installed on the machine.
This is a common problem, with many solutions here on SO. None of them are working for me -- if there's a post of SO about this, I've tried it.
I've been told that there's a one-to-one relationship between components in a major upgrade. That is, for every component that is removed, another component has to be added. When it's NOT a one-to-one relationship is when the old version doesn't get removed -- because there are still old components hanging.
Is there a way to determine what components are hanging? Like, in the log files or something? If I could determine what MSI is having the problem I could be far more proactive in solving the issue.
EDIT:
Although I haven't solved the problem, thanks to Mr. Urman's suggestions I may be on the right track.
I created that registry key, but... it didn't seem to do anything. However, I did search my uninstall logs for the word "Disallow", and I found this phrase 9 times:
Disallowing uninstallation of component: {GUID-HERE} since another client exists.
Also, this phrase appears before each grouping of the "Disallow" phrase:
PROPERTY CHANGE: Adding INSTALLLEVEL property. It's value is '1'.
This gives me something to go on. However, I can't seem to find the GUIDs that are mentioned! They're not in my solution nor are they searchable in the registry. Besides searching the registry, is there a way (Windows 7 32 bit) to find out what component a specific GUID corresponds to?
I've been told that there's a one-to-one relationship between components in a major upgrade. That is, for every component that is removed, another component has to be added. When it's NOT a one-to-one relationship is when the old version doesn't get removed -- because there are still old components hanging.
This is not strictly true. It's quite true of minor upgrades, and in certain configurations (those involving a late RemoveExistingProducts) major upgrades are just as picky. But your typical major upgrade functions more like the user had chosen to uninstall the old version, then to install the new version. Start by verifying your assumptions: make sure you have a proper major upgrade (you changed your ProductVersion and Product Code, and have the right entries in your Upgrade table, right?). Then diagnose.
How best to identify what's going on? In my experience, log files are your best bet. Since the older version is being uninstalled indirectly, you cannot use command lines to log it. So instead set the Logging policy by creating or setting the following registry value. (Remove it later when you want to revert the setting.)
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
Value (Reg_SZ): Logging
Data: voicewarmup
Then run your major upgrade, find the appropriate log file that was generated in %temp%. (Consider cleaning out %temp% ahead of time to make finding it easier. Or sort by date.) Look especially at the uninstallation (which you can identify by ProductVersion, or the presence of UPGRADINGPRODUCTCODE). I'd look especially for lines like Disallowing uninstallation of component ... that contain a component GUID.
Once you have that GUID, you have to figure out what component it is, and how it got into its current state. You can manually examine your built .msi files (with a tool like Orca) to find the component, but few tools will tell you all the clients. My employer's product comes with a helper tool called InstallShield Msi Sleuth that can list all the installed products referencing a component code, or you can build your own from MsiEnumProducts or Installer.ComponentClients. You cannot just search the registry directly, because Windows Installer stores GUIDs in a compressed or packed form.
Then identifying the "why" could be the hard part. Or it could be as simple as an incorrect Shared DLL reference count, especially if you've only encountered this on a test machine that has seen non-released versions of your product.
As a related alternative, but only relevant to a minor upgrade or small update, you could set the EnforceUpgradeComponentRules Policy. This helps reveal problems as you hit them, rather than allowing Windows Installer to do its best to continue anyway.

How can a modified Julia package be used natively?

So, there is this cool package I've found but it leaves a lot to be desired. Since it made more sense to modify it, rather than build a new one myself, I changed the code in the corresponding source directory (C:\Users[my username].julia\v0.4[package name]\src). I made sure to modify not just the base.jl file, but also the [name of package].jl one so that there are no issues with dependencies or the new functions I added. I tried running the package several times to ensure that Julia doesn't spit out any errors or exceptions (the original package had some deprecated stuff, which I also remedied). Still, I fail to use the additional functionality of the package that I augmented. Any help would be greatly appreciated.
I'm using Julia ver 0.4.2, on a Windows 7 machine. As an IDE I use Notepad++. Thanks
I'm not exactly sure what you tried, but here's a guess as to what's going on: if you've already loaded the package in your julia session, edits to the source files won't take effect unless you explicitly reload the package. There are some good workflow tips here, and more explanation of the module system here.
However, for a newbie the easiest thing might be to quit julia and restart.
As far as making changes to a package, as Gnumic commented, your best approach is to make a branch and commit your changes there. Once you become convinced your changes represent an improvement, consider sharing your changes with the rest of the world.

Prevent Custom Actions on Patch Uninstall

I have a product.msi having some custom action and it has been released.
patch.msp is a patch I made for product.msi.
when I remove this patch from Control panel => Add/Remove Program, custom action which in old package always run. that is not my expectation.
I don't want to run custom action when patch uninstall.
I also googled, but no good way fro released product, I can't change the wxs file to add condition for custom action.
Anyone can help me?
Most thanks your help!
A patch features patch-specific properties such as PATCH and MSIPATCHREMOVE. Use these conditions on custom actions to make them run or not run during a patch depending on what is necessary.
Be careful with the conditions on custom actions, they are complicated to get right. Here is a "MSI Conditions Cheat Sheet" to help you. I have not tested these conditions - testing is the only guarantee.
I am throwing in some further patching advice since this is difficult stuff to deal with. Please do read to save yourself trouble. Hate sending people down the wrong track with such a problematic technology:
If there are errors in a product's uninstall sequence your fix involves creating a very carefully designed minor upgrade that you can deliver as a patch. This is one of the best uses of a patch.
A minor upgrade does not uninstall the existing installation, but rater re-caches a new MSI file to use for maintenance and uninstall operations. Hence you can fix the uninstall before it is run.
Create a minor upgrade, test it fully as a regular upgrade install, and then package it as a patch. A patch is merely a distribution / delivery mechanism for an upgrade that works.
Don't waste time making a patch before the upgrade is verified. This is a common mistake that wastes a lot of time. In fact if the minor upgrade works, a patch may not be necessary at all. Just use the minor upgrade unless your MSI file is enormously big and you want to deliver a small "hotfix".
If you need to include files in your patch, I recommend enabling "include whole files". Otherwise bit-level patching is done, and this is unnecessary complexity (unless your binaries are enormous).
Include only what you need in a patch. Add no files or settings that are not required, and you can make a reliable patch. Avoid adding custom actions if at all possible.
Be aware that a patch uses the same InstallExecuteSequence as a regular install, but you can condition custom actions differently with patch-specific properties such as PATCH and MSIPATCHREMOVE. Use these conditions on custom actions to make them run or not run during a patch depending on what is necessary.
This "fix uninstall approach" is one of very few scenarios where I find MSI-patching can be successfully used. Otherwise patching is very complicated and error prone. It is also effective for small "hotfixes" to huge products - which obviously is what the whole technology is designed for.
Check Stefan Kruger's installsite.org for more upgrades and patching tips.
Check out this well known wix tutorial for upgrades and patches. And MSDN.

MSI Patches: Can we deliver new Components/Files with patches?

Simply question: Can we deliver new files/components using Patches?
I actually tried Purely Wix method i.e. http://wix.sourceforge.net/manual-wix3/wix_patching.htm, but not working for me.
Patch Creation Properties (pcp) method didn't give me any option to do so, that's why its out of my context now.
Our installers are already capable to Major Upgrade, but just in case of 2 or 3 news files, we intend to avoid giving 500+ MB build to users, instead considering giving small patches.
Above mentioned procedure seems to be working fine to deliver updates files for already installed ones.
Best regards