This is an academic rather than practical question. In the Traveling Salesman Problem, or any other which involves finding a minimum optimization ... if one were using a map/reduce approach it seems like there would be some value to having some means for the current minimum result to be broadcast to all of the computational nodes in some manner that allows them to abandon computations which exceed that.
In other words if we map the problem out we'd like each node to know when to give up on a given partial result before it's complete but when it's already exceeded some other solution.
One approach that comes immediately to mind would be if the reducer had a means to provide feedback to the mapper. Consider if we had 100 nodes, and millions of paths being fed to them by the mapper. If the reducer feeds the best result to the mapper than that value could be including as an argument along with each new path (problem subset). In this approach the granularity is fairly rough ... the 100 nodes will each keep grinding away on their partition of the problem to completion and only get the new minimum with their next request from the mapper. (For a small number of nodes and a huge number of problem partitions/subsets to work across this granularity would be inconsequential; also it's likely that one could apply heuristics to the sequence in which the possible routes or problem subsets are fed to the nodes to get a rapid convergence towards the optimum and thus minimize the amount of "wasted" computation performed by the nodes).
Another approach that comes to mind would be for the nodes to be actively subscribed to some sort of channel, or multicast or even broadcast from which they could glean new minimums from their computational loop. In that case they could immediately abandon a bad computation when notified of a better solution (by one of their peers).
So, my questions are:
Is this concept covered by any terms of art in relation to existing map/reduce discussions
Do any of the current map/reduce frameworks provide features to support this sort of dynamic feedback?
Is there some flaw with this idea ... some reason why it's stupid?
that's a cool theme, that doesn't have that much literature, that was done on it before. So this is pretty much a brainstorming post, rather than an answer to all your problems ;)
So every TSP can be expressed as a graph, that looks possibly like this one: (taken it from the german Wikipedia)
Now you can run a graph algorithm on it. MapReduce can be used for graph processing quite well, although it has much overhead.
You need a paradigm that is called "Message Passing". It was described in this paper here: Paper.
And I blog'd about it in terms of graph exploration, it tells quite simple how it works. My Blogpost
This is the way how you can tell the mapper what is the current minimum result (maybe just for the vertex itself).
With all the knowledge in the back of the mind, it should be pretty standard to think of a branch and bound algorithm (that you described) to get to the goal. Like having a random start vertex and branching to every adjacent vertex. This causes a message to be send to each of this adjacents with the cost it can be reached from the start vertex (Map Step). The vertex itself only updates its cost if it is lower than the currently stored cost (Reduce Step). Initially this should be set to infinity.
You're doing this over and over again until you've reached the start vertex again (obviously after you visited every other one). So you have to somehow keep track of the currently best way to reach a vertex, this can be stored in the vertex itself, too. And every now and then you have to bound this branching and cut off branches that are too costly, this can be done in the reduce step after reading the messages.
Basically this is just a mix of graph algorithms in MapReduce and a kind of shortest paths.
Note that this won't yield to the optimal way between the nodes, it is still a heuristic thing. And you're just parallizing the NP-hard problem.
BUT a little self-advertising again, maybe you've read it already in the blog post I've linked, there exists an abstraction to MapReduce, that has way less overhead in this kind of graph processing. It is called BSP (Bulk synchonous parallel). It is more freely in the communication and it's computing model. So I'm sure that this can be a lot better implemented with BSP than MapReduce. You can realize these channels you've spoken about better with it.
I'm currently involved in an Summer of Code project which targets these SSSP problems with BSP. Maybe you want to visit if you're interested. This could then be a part solution, it is described very well in my blog, too. SSSP's in my blog
I'm excited to hear some feedback ;)
It seems that Storm implements what I was thinking of. It's essentially a computational topology (think of how each compute node might be routing results based on a key/hashing function to the specific reducers).
This is not exactly what I described, but might be useful if one had a sufficiently low-latency way to propagate current bounding (i.e. local optimum information) which each node in the topology could update/receive in order to know which results to discard.
Related
I have a directed graph which is strongly connected and every node have some price(plus or negative). I would like to find best (highest score) path from node A to node B. My solution is some kind of brutal force so it takes ages to find that path. Is any algorithm for this or any idea how can I do it?
Have you tried the A* algorithm?
It's a fairly popular pathfinding algorithm.
The algorithm itself is not to difficult to implement, but there are plenty of implementations available online.
Dijkstra's algorithm is a special case for the A* (in which the heuristic function h(x) = 0).
There are other algorithms who can outperform it, but they usually require graph pre-processing. If the problem is not to complex and you're looking for a quick solution, give it a try.
EDIT:
For graphs containing negative edges, there's the Bellman–Ford algorithm. Detecting the negative cycles comes at the cost of performance, though (worse than the A*). But it still may be better than what you're currently using.
EDIT 2:
User #templatetypedef is right when he says the Bellman-Ford algorithm may not work in here.
The B-F works with graphs where there are edges with negative weight. However, the algorithm stops upon finding a negative cycle. I believe that is a useful behavior. Optimizing the shortest path in a graph that contains a cycle of negative weights will be like going down a Penrose staircase.
What should happen if there's the possibility of reaching a path with "minus infinity cost" depends on the problem.
I have to design a branch-and bound algorithm that solves the optimal tour of a graph on the cartesian plane every time. I have been given the hint that identifying hopeless branches earlier in the runtime will compound into a program that runs "a hundred times faster". I had the idea of assuming that the shortest edge connected to the starting/ending node will be either the first or last edge in the tour but a thin diamond shaped graph proves otherwise. Does any one have ideas for how to eliminate these hopeless branches or a reference that talks about this?
Basically, is there a better way to branch to subsets of solutions better than just lexicographically, eg. first branch is including and excluding edge a-b, second branch includes and excludes branch a-c
So somewhere in your branch-and-bound algorithm, you look at possible places to go, and then somehow keep track of them to do later.
To make this more efficient, you can do a couple things:
Write a better bound calculator. In other words, come up with an algorithm that determines the bound more accurately. This will result in less time spent on paths that turn out to be poor.
Instead of using a stack to keep track of things to do, use a queue. Instead of using a queue, use a priority queue (heap) ordered by bound, e.g. the things that seem best are put at the top of the heap, and the things that seem bad are put on the bottom.
Nearest-neighbor is a simple algorithm. Branch-and-Bound is just an optimizing loop and additionally you need a sub-problem solver. I think nearest-neighbor is also a branch-and-bound algorithm. Instead I would look into the simplex algorithm. It's a linear programming algorithm. Also cutting-plane algorithm to solve tsp.
I'm looking for ideas/experiences/references/keywords regarding an adaptive-parameter-control of search algorithm parameters (online-learning) in combinatorial-optimization.
A bit more detail:
I have a framework, which is responsible for optimizing a hard combinatorial-optimization-problem. This is done with the help of some "small heuristics" which are used in an iterative manner (large-neighborhood-search; ruin-and-recreate-approach). Every algorithm of these "small heuristics" is taking some external parameters, which are controlling the heuristic-logic in some extent (at the moment: just random values; some kind of noise; diversify the search).
Now i want to have a control-framework for choosing these parameters in a convergence-improving way, as general as possible, so that later additions of new heuristics are possible without changing the parameter-control.
There are at least two general decisions to make:
A: Choose the algorithm-pair (one destroy- and one rebuild-algorithm) which is used in the next iteration.
B: Choose the random parameters of the algorithms.
The only feedback is an evaluation-function of the new-found-solution. That leads me to the topic of reinforcement-learning. Is that the right direction?
Not really a learning-like-behavior, but the simplistic ideas at the moment are:
A: A roulette-wheel-selection according to some performance-value collected during the iterations (near past is more valued than older ones).
So if heuristic 1 did find all the new global best solutions -> high probability of choosing this one.
B: No idea yet. Maybe it's possible to use some non-uniform random values in the range (0,1) and i'm collecting some momentum of the changes.
So if heuristic 1 last time used alpha = 0.3 and found no new best solution, then used 0.6 and found a new best solution -> there is a momentum towards 1
-> next random value is likely to be bigger than 0.3. Possible problems: oscillation!
Things to remark:
- The parameters needed for good convergence of one specific algorithm can change dramatically -> maybe more diversify-operations needed at the beginning, more intensify-operations needed at the end.
- There is a possibility of good synergistic-effects in a specific pair of destroy-/rebuild-algorithm (sometimes called: coupled neighborhoods). How would one recognize something like that? Is that still in the reinforcement-learning-area?
- The different algorithms are controlled by a different number of parameters (some taking 1, some taking 3).
Any ideas, experiences, references (papers), keywords (ml-topics)?
If there are ideas regarding the decision of (b) in a offline-learning-manner. Don't hesitate to mention that.
Thanks for all your input.
Sascha
You have a set of parameter variables which you use to control your set of algorithms. Selection of your algorithms is just another variable.
One approach you might like to consider is to evolve your 'parameter space' using a genetic algorithm. In short, GA uses an analogue of the processes of natural selection to successively breed ever better solutions.
You will need to develop an encoding scheme to represent your parameter space as a string, and then create a large population of candidate solutions as your starting generation. The genetic algorithm itself takes the fittest solutions in your set and then applies various genetic operators to them (mutation, reproduction etc.) to breed a better set which then become the next generation.
The most difficult part of this process is developing an appropriate fitness function: something to quantitatively measure the quality of a given parameter space. Your search problem may be too complex to measure for each candidate in the population, so you will need a proxy model function which might be as hard to develop as the ideal solution itself.
Without understanding more of what you've written it's hard to see whether this approach is viable or not. GA is usually well suited to multi-variable optimisation problems like this, but it's not a silver bullet. For a reference start with Wikipedia.
This sounds like hyper heuristics which you're trying to do. Try looking for that keyword.
In Drools Planner (open source, java) I have support for tabu search and simulated annealing out the box.
I haven't implemented the ruin-and-recreate-approach (yet), but that should be easy, although I am not expecting better results. Challenge: Prove me wrong and fork it and add it and beat me in the examples.
Hyper heuristics are on my TODO list.
An article has been making the rounds lately discussing the use of genetic algorithms to optimize "build orders" in StarCraft II.
http://lbrandy.com/blog/2010/11/using-genetic-algorithms-to-find-starcraft-2-build-orders/
The initial state of a StarCraft match is pre-determined and constant. And like chess, decisions made in this early stage of the match have long-standing consequences to a player's ability to perform in the mid and late game. So the various opening possibilities or "build orders" are under heavy study and scrutiny. Until the circulation of the above article, computer-assisted build order creation probably wasn't as popularity as it has been recently.
My question is... Is a genetic algorithm really the best way to model optimizing build orders?
A build order is a sequence of actions. Some actions have prerequisites like, "You need building B before you can create building C, but you can have building A at any time." So a chromosome may look like AABAC.
I'm wondering if a genetic algorithm really is the best way to tackle this problem. Although I'm not too familiar with the field, I'm having a difficult time shoe-horning the concept of genes into a data structure that is a sequence of actions. These aren't independent choices that can be mixed and matched like a head and a foot. So what value is there to things like reproduction and crossing?
I'm thinking whatever chess AIs use would be more appropriate since the array of choices at any given time could be viewed as tree-like in a way.
Although I'm not too familiar with the field, I'm having a difficult time shoe-horning the concept of genes into a data structure that is a sequence of actions. These aren't independent choices that can be mixed and matched like a head and a foot. So what value is there to things like reproduction and crossing?
Hmm, that's a very good question. Perhaps the first few moves in Starcraft can indeed be performed in pretty much any order, since contact with the enemy is not as immediate as it can be in Chess, and therefore it is not as important to remember the order of the first few moves as it is to know which of the many moves are included in those first few. But the link seems to imply otherwise, which means the 'genes' are indeed not all that amenable to being swapped around, unless there's something cunning in the encoding that I'm missing.
On the whole, and looking at the link you supplied, I'd say that genetic algorithms are a poor choice for this situation, which could be accurately mathematically modelled in some parts and the search tree expanded out in others. They may well be better than an exhaustive search of the possibility space, but may not be - especially given that there are multiple populations and poorer ones are just wasting processing time.
However, what I mean by "a poor choice" is that it is inefficient relative to a more appropriate approach; that's not to say that it couldn't still produce 98% optimal results in under a second or whatever. In situations such as this where the brute force of the computer is useful, it is usually more important that you have modelled the search space correctly than to have used the most effective algorithm.
As TaslemGuy pointed out, Genetic Algorithms aren't guaranteed to be optimal, even though they usually give good results.
To get optimal results you would have to search through every possible combination of actions until you find the optimal path through the tree-like representation. However, doing this for StarCraft is difficult, since there are so many different paths to reach a goal. In chess you move a pawn from e2 to e4 and then the opponent moves. In StarCraft you can move a unit at instant x or x+1 or x+10 or ...
A chess engine can look at many different aspects of the board (e.g. how many pieces does it have and how many does the opponent have), to guide it's search. It can ignore most of the actions available if it knows that they are strictly worse than others.
For a build-order creator only time really matters. Is it better to build another drone to get minerals faster, or is it faster to start that spawning pool right away? Not as straightforward as with chess.
These kinds of decisions happen pretty early on, so you will have to search each alternative to conclusion before you can decide on the better one, which will take a long time.
If I were to write a build-order optimizer myself, I would probably try to formulate a heuristic that estimates how good (close the to the goal state) the current state is, just as chess engines do:
Score = a*(Buildings_and_units_done/Buildings_and_units_required) - b*Time_elapsed - c*Minerals - d*Gas + e*Drone_count - f*Supply_left
This tries to keep the score tied to the completion percentage as well as StarCraft common knowledge (keep your ressources low, build drones, don't build more supply than you need). The variables a to f would need tweaking, of course.
After you've got a heuristic that can somewhat estimate the worth of a situation, I would use Best-first search or maybe IDDFS to search through the tree of possibilities.
Edit:
I recently found a paper that actually describes build order optimization in StarCraft, in real time even. The authors use depth-first search with branch and bound and heuristics that estimate the minimum amount of effort required to reach the goal based on the tech tree (e.g. zerglings need a spawning pool) and the time needed to gather the required minerals.
Genetic Algorithm can be, or can sometimes not be, the optimal or non-optimal solution. Based on the complexity of the Genetic Algorithm, how much mutation there is, the forms of combinations, and how the chromosomes of the genetic algorithm is interpreted.
So, depending on how your AI is implemented, Genetic Algorithms can be the best.
You are looking at a SINGLE way to implement genetic algorithms, while forgetting about genetic programming, the use of math, higher-order functions, etc. Genetic algorithms can be EXTREMELY sophisticated, and by using clever combining systems for crossbreeding, extremely intelligent.
For instance, neural networks are optimized by genetic algorithms quite often.
Look up "Genetic Programming." It's similar, but uses tree-structures instead of lines of characters, which allows for more complex interactions that breed better. For more complex stuff, they typically work out better.
There's been some research done using hierarchical reinforcement learning to build a layered ordering of actions that efficiently maximizes a reward. I haven't found much code implementing the idea, but there are a few papers describing MAXQ-based algorithms that have been used to explicitly tackle real-time strategy game domains, such as this and this.
This Genetic algorithm only optimizes the strategy for one very specific part of the game: The order of the first few build actions of the game. And it has a very specific goal as well: To have as many roaches as quickly as possible.
The only aspects influencing this system seem to be (I'm no starcraft player):
build time of the various units and
buildings
allowed units and buildings given the available units and buildings
Larva regeneration rate.
This is a relatively limited, relatively well defined problem with a large search space. As such it is very well suited for genetic algorithms (and quite a few other optimization algorithm at that). A full gene is a specific set of build orders that ends in the 7th roach. From what I understand you can just "play" this specific gene to see how fast it finishes, so you have a very clear fitness test.
You also have a few nice constraints on the build order, so you can combine different genes slightly smarter than just randomly.
A genetic algorithm used in this way is a very good tool to find a more optimal build order for the first stage of a game of starcraft. Due to its random nature it is also good at finding a surprising strategy, which might have been an additional goal of the author.
To use a genetic algorithm as the algorithm in an RTS game you'd have to find a way to encode reactions to situations rather than just plain old build orders. This also involves correctly identifying situations which can be a difficult task in itself. Then you'd have to let these genes play thousands of games of starcraft, against each other and (possibly) against humans, selecting and combining winners (or longer-lasting losers). This is also a good application of genetic algorithms, but it involves solving quite a few very hard problems before you even get to the genetic algorithm part.
I've been meaning to do a little bit of brushing up on my knowledge of statistics. One area where it seems like statistics would be helpful is in profiling code. I say this because it seems like profiling almost always involves me trying to pull some information from a large amount of data.
Are there any subjects in statistics that I could brush up on to get a better understanding of profiler output? Bonus points if you can point me to a book or other resource that will help me understand these subjects better.
I'm not sure books on statistics are that useful when it comes to profiling. Running a profiler should give you a list of functions and the percentage of time spent in each. You then look at the one that took the most percentage wise and see if you can optimise it in any way. Repeat until your code is fast enough. Not much scope for standard deviation or chi squared there, I feel.
All I know about profiling is what I just read in Wikipedia :-) but I do know a fair bit about statistics. The profiling article mentioned sampling and statistical analysis of sampled data. Clearly statistical analysis will be able to use those samples to develop some statistical statements on performance. Let's say you have some measure of performance, m, and you sample that measure 1000 times. Let's also say you know something about the underlying processes that created that value of m. For instance, if m is the SUM of a bunch of random variates, the distribution of m is probably normal. If m is the PRODUCT of a bunch of random variates, the distribution is probably lognormal. And so on...
If you don't know the underlying distribution and you want to make some statement about comparing performance, you may need what are called non-parametric statistics.
Overall, I'd suggest any standard text on statistical inference (DeGroot), a text that covers different probability distributions and where they're applicable (Hastings & Peacock), and a book on non-parametric statistics (Conover). Hope this helps.
Statistics is fun and interesting, but for performance tuning, you don't need it. Here's an explanation why, but a simple analogy might give the idea.
A performance problem is like an object (which may actually be multiple connected objects) buried under an acre of snow, and you are trying to find it by probing randomly with a stick. If your stick hits it a couple of times, you've found it - it's exact size is not so important. (If you really want a better estimate of how big it is, take more probes, but that won't change its size.) The number of times you have to probe the snow before you find it depends on how much of the area of the snow it is under.
Once you find it, you can pull it out. Now there is less snow, but there might be more objects under the snow that remains. So with more probing, you can find and remove those as well. In this way, you can keep going until you can't find anything more that you can remove.
In software, the snow is time, and probing is taking random-time samples of the call stack. In this way, it is possible to find and remove multiple problems, resulting in large speedup factors.
And statistics has nothing to do with it.
Zed Shaw, as usual, has some thoughts on the subject of statistics and programming, but he puts them much more eloquently than I could.
I think that the most important statistical concept to understand in this context is Amdahl's law. Although commonly referred to in contexts of parallelization, Amdahl's law has a more general interpretation. Here's an excerpt from the Wikipedia page:
More technically, the law is concerned
with the speedup achievable from an
improvement to a computation that
affects a proportion P of that
computation where the improvement has
a speedup of S. (For example, if an
improvement can speed up 30% of the
computation, P will be 0.3; if the
improvement makes the portion affected
twice as fast, S will be 2.) Amdahl's
law states that the overall speedup of
applying the improvement will be
I think one concept related to both statistics and profiling (your original question) that is very useful and used by some (you see the technique advised from time to time) is while doing "micro profiling": a lot of programmers will rally and yell "you can't micro profile, micro profiling simply doesn't work, too many things can influence your computation".
Yet simply run n times your profiling, and keep only x% of your observations, the ones around the median, because the median is a "robust statistic" (contrarily to the mean) that is not influenced by outliers (outliers being precisely the value you want to not take into account when doing such profiling).
This is definitely a very useful statistician technique for programmers who want to micro-profile their code.
If you apply the MVC programming method with PHP this would be what you need to profile:
Application:
Controller Setup time
Model Setup time
View Setup time
Database
Query - Time
Cookies
Name - Value
Sessions
Name - Value