I have a flash project that shall target different platforms. However - code is not completely the same for the different platforms.
using compiler statements and config blocks like
CONFIG::MOBILE{
...mobile specific code here...
}
I can easily maintain the different versions within the same project.
However - there should also be different mainapp-app.xml files be used for the different versions - or depending on the compiler flags different content within the mainapp-app.xml
how can I do that?
Great question. Indeed, you can create multiple config.xml files in your project and link to these config files via compiler arguments. I generally use ANT to do this as it makes the build process simple. But if you don't have ANT setup, simply right click on your project, select ActionScript Compiler and add the following to the list of additional compiler arguments:
-load-config+=config/mainapp-app.xml
Note that the config folder is relative to the project root. I generally put my config files in this folder. I wrote a detailed post on how to perform conditional compilation in AS3 on my blog. Visit http://www.willjohnson.me/blog/?p=146 for detailed instructions.
I hope this answered your question.
Regards,
Will
Related
I have this project that I have done for experimentation with Qt and shared libraries. This is basically a couple of Qt Widgets from the tutorials for Qt and what I think is the right CMakeLists configuration so a MylibConfig.cmake is automatically generated from a MylibConfig.cmake.in to share the library. The problem is that I don't want the end user to add the dependencies of my library to its own CMakeLists.txt. This is, in my case, the library depends on Qt4, but I want that the end user to not have to do find_package(Qt 4 REQUIRED). Imagine that I want to provide an enclosed functionality to someone that does not need or want to know about what my library is built on. Is there a way in the automatic generation of the MylibConfig.cmake that it automatically finds all necessary packages or is the only option to add the fin package manually in the MylibConfig.cmake.in?
Thank you very much.
In fact, both mentioned projects do find of dependencies from their *Config.cmake files. And nowadays that is the only option -- CMake can't help you to do it "automatically".
So, some way or another, your config module should do the same.
The easy way is to add find_dependency() calls (cuz you know exactly what other packages, your project is based on).
A little bit harder is to do it "automatically" (writing your own helper function) -- for example by inspecting properties of your target(s), "searching" where all that libraries come from and finally generating find_dependency() calls anyway.
I am building a project on Github written in Objective-C. It resolves MAC addresses down to manufacturer details. The lookup table is currently stored as text file manuf.txt (from the Wireshark project), which is parsed at run-time, which is costly. I would prefer to compile this down to archived objects at build-time, and load that instead.
I would like to amend the build phases such that I:
Build a simple compiler
Run the compiler, parsing manuf.txt and outputting archived objects
Build the framework
Copy the archived objects into the framwork
I am looking for wisdom on how to achieve steps 1 and 2 using Xcode v7.3 as Xcode provides only a Copy Files phase or a Run Script phase. An example of other projects achieving similar goals would be inspiring.
I suspect that what you are asking is possible, but tricky. The reason is that you will need to write a bunch of class files and then dynamically add them to the project.
Firstly you will need to employ a run script phase to run various tools from the command line to parse your file and generate a number of class files from it. I would suggest looking into various templating engines. For example appledoc uses moustache templates to generate API documentation files. You could use the same technique to generate header and implementation files.
Next, rather than generating archived objects an trying to import into a framework. I think you may be better off generating raw source code, adding it to a project and compiling into a framework. Probably simpler in the long run.
To automatically include the generated code I would look into (which means I haven't actually tried this :-) adding a folder reference to the project rather than an Xcode group. Folder references are an option in the 'Add files to ...' dialog.
Folder references refer to a directory and automatically add the entire contents of that directory to a project. So you can use one to point to the directory where you have generated the source code. This is a much better option than trying to manipulate the project or injecting things into an established framework.
I would prefer to parse the file at runtime. After launch you can look for an already existing output, otherwise parse it one time.
However, I have to do something similar at Objective-Cloud. I simply added a run script build phase and put the compiler call into it.
This question is about the project command and, by extension, what the concept of a project means in cmake. I genuinely don't understand what a project is, and how it differs from a target (which I do understand, I think).
I had a look at the cmake documentation for the project command, and it says that the project command does this:
Set a name, version, and enable languages for the entire project.
It should go without saying that using the word project to define project is less than helpful.
Nowhere on the page does it seem to explain what a project actually is (it goes through some of the things the command does, but doesn't say whether that list is exclusive or not). The cmake.org examples take us through a basic build setup, and while it uses the project keyword it also doesn't explain what it does or means, at least not as far as I can tell.
What is a project? And what does the project command do?
A project logically groups a number of targets (that is, libraries, executables and custom build steps) into a self-contained collection that can be built on its own.
In practice that means, if you have a project command in a CMakeLists.txt, you should be able to run CMake from that file and the generator should produce something that is buildable. In most codebases, you will only have a single project per build.
Note however that you may nest multiple projects. A top-level project may include a subdirectory which is in turn another self-contained project. In this case, the project command introduces additional scoping for certain values. For example, the PROJECT_BINARY_DIR variable will always point to the root binary directory of the current project. Compare this with CMAKE_BINARY_DIR, which always points to the binary directory of the top-level project. Also note that certain generators may generate additional files for projects. For example, the Visual Studio generators will create a .sln solution file for each subproject.
Use sub-projects if your codebase is very complex and you need users to be able to build certain components in isolation. This gives you a very powerful mechanism for structuring the build system. Due to the increased coding and maintenance overhead required to make the several sub-projects truly self-contained, I would advise to only go down that road if you have a real use case for it. Splitting the codebase into different targets should always be the preferred mechanism for structuring the build, while sub-projects should be reserved for those rare cases where you really need to make a subset of targets self-contained.
I would like to add into project some files that shouldn't be compiled. I mean mainly text files with for example notes, concepts, comments etc.
I realized that it is possible only at module level. But it is not very convenient. I'd rather prefer to keep them on project level. Is it possible in any way?
And if not:
I have another idea: to create special module, name it for example "other_stuff", do not create src directory and put files there. Is it ok? I'm afraid of potential compilation problems when one of modules is artificial, with no sources but still has sdk assigned (it is probably impossible to leave module without sdk assigned).
While generating artifacts you can add any file into your artifact. Also, in modules you can have folders not declared as source, and they will not be compiled.
I am trying to clean up some of my projects, and one of the things that are puzzling me is how to deal with header files in static libraries that I have added as "project dependencies" (by adding the project file itself). The basic structure is like this:
MyProject.xcodeproj
Contrib
thirdPartyLibrary.xcodeproj
Classes
MyClass1.h
MyClass1.m
...
Now, the dependencies are all set up and built correctly, but how can I specify the public headers for "thirdPartyLibrary.xcodeproj" so that they are on the search path when building MyProject.xcodeproj. Right now, I have hard-coded the include directory in the thirdPartyLibrary.xcodeproj, but obviously this is clumsy and non-portable. I assume that, since the headers are public and already built to some temporary location in ~/Library (where the .a file goes as well), there is a neat way to reference this directory. Only.. how? An hour of Googling turned up blank, so any help is greatly appreciated!
If I understand correctly, I believe you want to add a path containing $(BUILT_PRODUCTS_DIR) to the HEADER_SEARCH_PATHS in your projects build settings.
As an example, I took an existing iOS project which contains a static library, which is included just in the way you describe, and set the libraries header files to public. I also noted that the PUBLIC_HEADERS_FOLDER_PATH for this project was set to "/usr/local/include" and these files are copied to $(BUILT_PRODUCTS_DIR)/usr/local/include when the parent project builds the dependent project. So, the solution was to add $(BUILT_PRODUCTS_DIR)/usr/local/include to HEADER_SEARCH_PATHS in my project's build settings.
HEADER_SEARCH_PATHS = $(BUILT_PRODUCTS_DIR)/usr/local/include
Your situation may be slightly different but the exact path your looking for can probably be found in Xcode's build settings. Also you may find it helpful to add a Run Script build phase to your target and note the values of various settings at build time with something like:
echo "BUILT_PRODUCTS_DIR " $BUILT_PRODUCTS_DIR
echo "HEADER_SEARCH_PATHS " $HEADER_SEARCH_PATHS
echo "PUBLIC_HEADERS_FOLDER_PATH " $PUBLIC_HEADERS_FOLDER_PATH
.
.
.
etc.
I think that your solution is sufficient and a generally accepted one. One alternative would be to have all header files located under an umbrella directory that can describe the interface to using the depended-on libraries and put that in your include path. I see this as being similar to /usr/include. Another alternative that I have never personally tried, but I think would work would be to create references to all the headers of thirdPartyLibrary from MyProject so that they appear to be members of the MyProject. You would do this by dragging them from some location into MyProject, and then deselecting the checkbox that says to copy them into the project's top level directory. From one perspective this seems feasible to me because it is as if you are explicitly declaring that your project depends on those specific classes, but it is not directly responsible for compiling them.
One of the things to be wary of when addressing this issue is depending on implementation-specific details of Xcode for locating libraries automatically. Doing so may seem innocuous in the meantime but the workflows that it uses to build projects are subject to change with updates and could potentially break your project in subtle and confusing ways. If they are not well-defined in some documentation, I would take any effect as being coincidental and not worth leveraging in your project when you can enforce the desired behavior by some other means. In the end, you may have to define a convention that you follow or find one that you adopt from someone else. By doing so, you can rest assured that if your solution is documented and reproducible, any developer (including yourself in the future) can pick it up and proceed without tripping over it, and that it will stand the testament of time.
The way we do it is to go into build target settings for the main project and add:
User Header Search Path = "Contrib"
and check that it searches recursively. We don't see performance problems with searching recursively even with many (10-15 in some projects) dependencies.