Is there a way to upload all the opened documents to the current site without having to load em manually?
At the moment for each opened document I select one and I press Ctrl+shift+U but it's kinda lame if you edited more than 10-20 files
thanks
There is no native function however I have this simple cheat I use:
Open up the find and replace dialogue
Do a search for a string that appears in all the open documents. The page title usually has something useful. Make sure "all open documents" is selected. Click "Find All"
The panel appears that shows you all the instances of your search (should be all the open files)
Highlight all the file names in the search results panel, right click, and click "put"
It actually only takes a few seconds and saves you the pain of having to put each file individually. This is obviously for cases where simply highlighting the files and clicking the put button isn't feasible (e.g. files in multiple directories, etc).
In CS6 (not sure about older versions), when viewing the local site, right-click on the project's parent directory, hover on 'Select' and then 'Checked Out Files.'
This will highlight all the files you have checked out and allow you to check them in with one click.
Note: As Dreamweaver gathers all of the check in status information from the server, this can take quite a while if it is a large project. Only suggested for smaller projects, in which case it seems to work great!
Following the same process, you can also select 'Recently Modified', which only searches your local site and is much faster (but doesn't directly answer the check in/out part of your question).
I hope this helps!
I was a big fan of the Get Put All Extension, but it does not work on CS4 or CS5.
Unfortunately, upload all open is not built in. A long while ago I wrote a Dreamweaver extension called Get Put All, which allows for getting or putting of all open documents. It should still be available for sale (probably $5 or under) at the CommunityMX web site (down for me at the moment). I no longer contribute to CommunityMX, so I won't see any proceeds. While written a while ago, it should work fine in newer versions of Dreamweaver.
Just found out how to do it.
Use ctr+select all the files in the tree view under files and then right click on the selected entries and click "put"
SOLUTION:
1) Click on "Site"
2) "Manage Sites" (Select the site you want to manage)
3) "Edit"
4) "Remote Info"
5) And tick the checkbox "Automatically upload files to server on save"
(See where I am going here)
Have all the files you want to upload OPEN on Dreamweaver
6) Then "Find" a common code each document has
7) And "Replace ALL" with the EXACT same code
*Make sure "Find in: OPEN DOCUMENTS" is selected before you do the replacement
Once Dreamweaver has find and replaced the exact code - all documents will be unsaved at this point.
8) Just click "Save All" and voila!!! Now your CTRL+SHIFT+U fingers can chill the F out!
Hope this helps!
Oh, Remember to uncheck "Automatically upload files to server on save" afterwards or when not needed
PS: When you click "Save All" - you might get Dreamweaver saying "NOT RESPONDING". Just leave dreamweaver alone until it's done because it's uploading files at a rapid rate depending how fast your internet is :)
Related
I am trying to open files using a specified executable; just like as if you were to right mouse click on a file then scroll to "Open with"
I tried what kaymaf said and reviewed the docs, but I cannot seem to get this to work.
Dim FI As New FileInfo(GetFileNameFromListViewItem(ListViewCollection.SelectedItems(0)))
Dim GetExif As Process = System.Diagnostics.Process.Start("C:\Users\*username*\Downloads\exiftool.exe", FI.FullName)
This just ends up open the executable and rather than opening the file with the executable.
You would like to open a file with your program using the Windows context menu; and do you want to get an entry in that menu? If that is not correct, the answer can be deleted.
I found this in a German forum, and they refer to this site:
This is the translated text:
One possibility would be that you register your file extension and your program in the system to open this file extension. As soon as the system knows everything, you only need to right-click on the file(s) and in the context menu, in addition to the standard entries, another menu item for opening these files is displayed. If you select this menu item, your program will start automatically if it has not yet started, and you can read out / determine the path to this file or several files in your program and process it accordingly. How it all works is described here: ookii.org/Blog/opening_files_via_idroptarget_in_net
On this page there is also a sample for download (start text files with your own program via an additional entry in the context menu / display paths to the files). It is not a VB, but it should be translatable without any problems. Corresponding information on the page and the comments should be observed.
I have a file in my project I frequently need to open, and I am forever looking for it. OK, I can usually find it via Ctrl + Tab (as it was recently accessed) or via the drop-down menu right of the file tabs, or via Ctrl + Shift + N to search for the file by name, but all of these take too long.
A Global bookmark would be awesome or a 'favourite files' tab I could float... does anything like that exist? I tried floating the file itself as well as adding it to a 'New Tab Group' (both can be done by right-clicking the file tab), but both of these options take up valuable space - you cannot have the file auto-hide in the way unpinned tabs do.
Does anyone have a trick up their sleeve?
It's a little on the nose and not the perfect "global bookmark" solution sought, but renaming the file so that it appears at the top of the drop-down tab list is half a solution. The file is still two clicks away - one would be better.
Ektron 9 - steps to trigger issue ... we think:
Create new content folder
Edit folder properties
Smart Forms tab - untick inherit, and remove "Blank HTML"
The "new" menu on the folder now:
Does not show DMS Document as a menu item
Does not show Smart Form list as a pull-out sub menu.
Question
How do I get "Blank HTML" back into the smart form tab property in the folder
Why is this happening
Help!!
[Edited] Workaround
eGandalf gave the simple answer via Twitter (previously I had attempted a workaround of putting inheritance back on then resetting the tree): toggle the "Require Smart Forms" checkbox on the "Smart Forms" tab and the Blank HTML option will come back.
This is by design. When you remove the HTML option, note that it checks the "Require Smart Form" box (and, reciprocally, checking the Require Smart Form box removes the HTML option). That means that all other types, including PageBuilder, DMS documents, or HTML are now forbidden in this folder.
As a best practice, you shouldn't be mixing types in a folder anyway. A lot of people do, but that doesn't make it any more valid. If you've got a folder for Press Releases and you have a Press Release Smart Form, you shouldn't have any other type of content in that folder. The less you mix types, the less filtering you have to do either with the API or post-request via LINQ. As a result, you'll have a more consistently performing site.
In situations like this, where I want the DMS assets and the Smart Form content to a) both be searchable, b) both be managed by the same user/group and c) there's a strong connection between the two (e.g., Whitepaper information Smart Form + PDF asset download), I'll create a child folder and allow DMS assets there. In the Case Study example, the folder structure may look like this:
Content
Case Studies (Smart Form only)
Downloads (DMS Allowed)
In contrast, if I don't want the DMS assets to be independently searchable, I'll remove them from the Content folder entirely and place them in a separate, root-level, non-searchable folder called Resources or Downloads.
Because Blank HTML is a default (and ID 0), you might have to reassign it in the database.
My guess is that removing the Blank HTML option impacts DMS retrieval in the workarea specifically.
In this case, I'd reach out to support, I've never actually needed/wanted to do this.
Edit:
I dug a bit more to try and give you something to try.
You'll need to reinsert an xml_id into folder_to_xml_tbl.
insert into folder_to_xml_tbl VALUES(your_folder_id, 0, 1);
Ektron support have replied:
Hi ,
Engineering have advised that DMS documents are unstructured.
By forcing all content to be structured content, it disallows raw html as well as dms assets and only allows documents with structure to be created
In any reply please include the case number in the subject line.
To open a new case email uksupport#ektron.com or use the support request form at http://www.ektron.com/Resources/Support/Contact/
I'm sure there is a simple option for this but I have as yet been unable to find it. Every time I close and reopen Aptana Studio 3 it collapses all the folders in the project explorer and I have to reopen them all, is there a way to get it to leave them open and save the project explorer's state when I close the program?
Thanks.
I cannot find any way to keep the state of the Project Explorer. However, using the App Explorer, the state of your open folder will be preserved. You can also try the "Navigator" which looks just like the Project Explorer, but appears to keep state. I will add the proviso to that: It kept state when I restarted aptana, but it also developed a GUI glitch where it appears to be scrolled to the right so I only see the right half of all of my file names and I cannot fix it, so this may not be a good option if you get the same glitch.
There is also a method which does not do quite what you ask, but may be a good fix for you anyway. If you click "Link with Editor" picture (two yellow arrows) in the Project Editor, it will automatically expand your project hierarchy to match whichever open file you have active. Since your files stay open when you close Aptana, this would keep the Project Explorer expanded to whatever you are looking at even on restart. See this question
You can also set up working sets for various parts of your code that are buried in the hierarchy and use the Project Explorer to show those working sets instead of you projects. This does not save state, but it does give you easy access to common parts of your code that may be deeply buried.
Hope one of these helps you.
I am currently using xcode and I find it's lack of tabs quite disturbing.
I currently use command-shift-d to search through all the files, or ctrl-1 to open the history of files that were recently opened.
It works but I find it less effective than just tabbing through the few files i am currently working on.
Is there any way, third party or not, to enable some sort of tabbed organization?
If not, is there any other way to quickly navigate through a subset of files?
XCode 4 now supports tabs. You can enable by selecting "View / Show Tab Bar" menu.
Not really, but one alternative is View > Show Favorites Bar and drag five or six frequently-used source files into it. Not as flexible as tabs but satisfies your request for "quickly navigate through a subset of files".
The traditional way is to use the detail view. Get the files you want in the Detail view by one of these means:
Put them all in the same group, then select the group
Enter a filter expression in the Search Bubble that narrows the items shown
Define a Smartgroup that includes just the files you want
Get a list of the files as a Find in Project result, then select that item in Find Results
Then you can use the Detail View as your list of interesting files and navigate through it quickly with the up and down arrows.
First of all, you can use Textmate (which I believe has Xcode integration). Otherwise:
Window (Menu) -> Organizer (ctrl-command-o)
At the bottom of that window, if you don't have two panes, click the square to the right of the gear. Now drag code files of interest to the left, grey pane--a single click or arrow up/down will open the file in the editor pane.
If you do open a bunch of windows, as vog suggested, you'll need to command-~ through them--not alt-tab.
Cheers.
The Xcode source code editor allows you to choose the file from a list. It's two clicks instead of one (as it would be with tabbing), but it's better than nothing.
In addition, you can simply Alt-Tab through your open source code windows. This is not slower than tabbing, and has the same effect since the source code windows are usually placed exactly one in front of another.
You'll definitely want to read through this. (XCode Tips and Tricks you wish you know about two years ago - SO)
You can navigate between files using "Recent Files"
Write simple applescript:
tell application "Xcode"
tell application "System Events"
keystroke "1" using {control down} -- open "Related Files"
key code 125 -- choose "Recent Files" ("keystroke down" doesn't work)
keystroke return -- enter to "Recent Files"
key code 125 -- choose previous file
end tell
end tell
And bind it to some shortcut using for example FastScripts(free up to 10 bindings)
I have this script on "Control" + "`". (XCode 4)
Hope this will help
You may also try an Xcode plugin I've just released - it's called Code Pilot and solves a lot of issues of Xcode's navigation, making it more TextMate/Eclipse-like.
Check it out here: http://macoscope.net/en/mac/codepilot/
I hope this helps!
It is simple with XCode 7.2
GoTo View>>Show Tab Bar
This will show the tab bar.
RightClick on the New Tab and click -->"NEW TAB"
Then We can see all the files in tabs.