Today, I have a problem with hosting my custom service host using custom binding. I have tried to implement ServiceHostFactory but when i right click to view with in browser, the error appeared as IIS does not recognize my custom binding (duplexHttpBinding).
My web.config is here:
<services>
<service name="TestWcf.Service1"
behaviorConfiguration="Service1Behavior">
<host>
<baseAddresses>
<add baseAddress="http://localhost:8888/Service1"/>
</baseAddresses>
</host>
<endpoint
address="http://localhost:9999/Service1"
binding="duplexHttpBinding"
bindingConfiguration="binding1"
contract="TestWcf.IService" />
</service>
</services>
<bindings>
<duplexHttpBinding>
<binding name="binding1"
closeTimeout="00:01:00"
openTimeout="00:01:00"
receiveTimeout="24.20:31:23.6470000"
sendTimeout="02:01:00"
session="ReliableSession"
sessionTimeout="00:10:00"
maxUndeliveredMessages="100"
maxMessagesInBatch="10"
maxPollingReplyInterval="00:02:00">
</binding>
</duplexHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="Service1Behavior">
<serviceMetadata httpGetEnabled="True" />
<serviceDebug includeExceptionDetailInFaults="True" />
</behavior>
</serviceBehaviors>
</behaviors>
and code in dervied class is here:
public class CustomServiceHost : ServiceHostFactory
{
public override ServiceHostBase CreateServiceHost(string service, Uri[] baseAddresses)
{
DuplexHttpBinding binding = new DuplexHttpBinding();
binding.Name = "binding1";
Uri baseAddress = new Uri("http://localhost:8888/Service1");
Uri address = new Uri("http://localhost:9999/Service1");
ServiceHost serviceHost = new ServiceHost(typeof(Service1), baseAddresses);
serviceHost.AddServiceEndpoint(typeof(IService1), binding, address);
return serviceHost;
}
}
and in SVC file
<%# ServiceHost Language="C#" Debug="true" Service="TestWcf.Service1" Factory="TestWcf.CustomServiceHost" %>
Do I miss something in the context?
Thank you.
You must register new binding as binding extension in your configuration file.
Related
I have created WCF service to host on IIS.
I am using ServiceHostFactory method to host my service(using Unity as DI).
I want to host my service using multiple binding, over the HTTP as well as over the TCP.
I tried giving base address, but its not taking. still giving me error as Service registered with HTTP schema.
Below code snippet might give you and idea.
public class MyServiceHostFactory : ServiceHostFactory
{
protected override ServiceHost CreateServiceHost(
Type serviceType, Uri[] baseAddresses)
{
MyServiceHost serviceHost = new MyServiceHost(serviceType, baseAddresses);
//configure container
MyFactory.Register();
return serviceHost;
}
}
Config file:
<system.serviceModel>
<services>
<service name="My.Service.MyService">
<host>
<baseAddresses>
<add baseAddress="http://localhost:9000/MyService/"/>
<add baseAddress="net.tcp://localhost:9001/MyService/"/>
</baseAddresses>
</host>
<endpoint address="Question" binding="basicHttpBinding" contract="My.Contract.IQuestionContract" />
<endpoint address="Answer" binding="basicHttpBinding" contract="My.Contract.IAnswerContract" />
<endpoint address="Question" binding="netTcpBinding" contract="My.Contract.IQuestionContract" />
<endpoint address="Answer" binding="netTcpBinding" contract="My.Contract.IAnswerContract" />
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="MyServicebehavior">
<serviceMetadata httpGetEnabled="True" httpsGetEnabled="True" />
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="True">
</serviceHostingEnvironment>
Can anyone suggest me what can be done?
Main thing,
Is it possible to host service using ServiceHostFactory with Multiple Binding?
If Yes, can anyone help me how?
I'd try to remove base net.tcp address and specify full address on endpoint.
This may seem like a really easy question but I can't seem to figure it out at all.
I'm trying to create a new WCF service, and I'm new to having to secure them. I'm using a custom username/password for authentication. The problem [right now anyways] that I seem to be running into is that I can't figure out how to define the service to use the WSHttpBinding (on the service side, not the client side).
Am I missing something incredibly simple? Any pointers and/or recommendations would be greatly appreciated!
EDIT
Here's my code so far:
IAccountService
[ServiceContract]
public interface IAccountService
{
[OperationContract]
bool IsCardValid(string cardNumber);
[OperationContract]
bool IsAccountActive(string cardNumber);
[OperationContract]
int GetPointBalance(string cardNumber);
}
Service web.config
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<!-- To avoid disclosing metadata information, set the value below to false before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false"/>
<StructureMapServiceBehavior />
</behavior>
</serviceBehaviors>
</behaviors>
<extensions>
<behaviorExtensions>
<add name="StructureMapServiceBehavior" type="Marcus.Loyalty.WebServices.Setup.StructureMapServiceBehavior, Marcus.Loyalty.WebServices, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null"/>
</behaviorExtensions>
</extensions>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" aspNetCompatibilityEnabled="true" />
<services>
<service name="Marcus.Loyalty.WebServices.Account.IAccountService">
<endpoint address=""
binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_Config"
contract="Marcus.Loyalty.WebServices.Account.IAccountService"/>
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="WSHttpBinding_Config"/>
</wsHttpBinding>
</bindings>
</system.serviceModel>
Testing app (console app)
class Program
{
static void Main(string[] args)
{
Console.WriteLine("Please enter card number");
var number = Console.ReadLine();
var endPoint = new EndpointAddress("http://localhost:59492/Account/AccountService.svc");
var binding = new WSHttpBinding(SecurityMode.Message);
binding.Security.Message.ClientCredentialType = MessageCredentialType.UserName;
binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.Basic;
var cf = new ChannelFactory<IAccountService>(binding, endPoint);
cf.Credentials.UserName.UserName = "testuser";
cf.Credentials.UserName.Password = "Password1!";
var service = cf.CreateChannel();
var balance = service.IsAccountActive(number);
Console.WriteLine("\nBALANCE: {0:#,#}", balance);
Console.Write("\n\nPress Enter to continue");
Console.Read();
}
}
Testing app app.config
<configuration>
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding name="BasicHttpBinding_IAccountService" />
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:59492/Account/AccountService.svc"
binding="wsHttpBinding" bindingConfiguration="BasicHttpBinding_IAccountService"
contract="ServiceReference1.IAccountService" name="BasicHttpBinding_IAccountService" />
</client>
</system.serviceModel>
</configuration>
You need to define the abc (address, binding, contract) configuration into de web.config file (you can also do it programmatically. the b part, the binding, you can specify the wsHttpBinding
<system.serviceModel>
<services>
<service name = "MyNamespace.MyService">
<endpoint
address = "http://localhost:8000/MyService"
binding = "wsHttpBinding"
contract = "MyNamespace.IMyContract" />
</service>
</services>
</system.serviceModel>
If you wish to enable security in a proper way, there is a lot of literature and options. You can use certificates, windows based, tokens, ... passing a username & password like a parameter could not be the best way to do it.
There is an extensive sample on MSDN (How to: Specify a Service Binding in code) - but basically, you need to have:
your service contract (IMyService)
an implementation of that service (MyService)
a code where you create your ServiceHost to host your service
You got all of that? Great!
In that case, just do something like this:
// Specify a base address for the service
string baseAddress = "http://YourServer/MyService";
// Create the binding to be used by the service.
WsHttpBinding binding1 = new WsHttpBinding();
using(ServiceHost host = new ServiceHost(typeof(MyService)))
{
host.AddServiceEndpoint(typeof(IMyService), binding1, baseAddress);
host.Open();
Console.ReadLine();
}
and now you should have your service host up and running, on your chosen base address and with the wsHttpBinding defined in code.
I'm attempting to eliminate tempuri.org from my WCF service, hosted in IIS using fileless activation. I've followed the instructions here, and I'm stuck when it comes to the bindingNamespace attribute in Web.config, because I'm using fileless activation.
My Web.config merely contains:
<serviceActivations>
<add relativeAddress="Foo.svc"
service="BigCorp.Services.Foo, BigCorp.Services"
/>
</serviceActivations>
I therefore don't have an <endpoint> node on which to set bindingNamespace.
What to do?
You can still use the <services> and hence <endpoint> nodes with WCF File-less activation. Take a look at the following example, where I even modify the default wsHttpBinding to add transport security and enable default behaviors as well; all for the file-less activation of the "Module1.DES.ExternalDataService" service.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding messageEncoding="Mtom">
<security mode="Transport"/>
</binding>
</wsHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceMetadata httpGetEnabled="true"/>
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service name="Module1.DES.ExternalDataService">
<endpoint binding="wsHttpBinding" bindingNamespace="" contract="Module1.DES.IExternalDataService"/>
</service>
</services>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true">
<serviceActivations>
<add relativeAddress="ExternalDataService.svc" service="Module1.DES.ExternalDataService"/>
</serviceActivations>
</serviceHostingEnvironment>
</system.serviceModel>
Hope this helps.
To change the binding namespace you can use a custom factory (instead of the default one provided) where you can change all the properties of the binding:
<serviceActivations>
<add relativeAddress="Foo.svc"
service="BigCorp.Services.Foo, BigCorp.Services"
factory="BigCorp.Services.FooHostFactory, BigCorp.Services"/>
</serviceActivations>
And the factory:
public class FooHostFactory : ServiceHostFactory
{
protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses)
{
return new FooServiceHost(serviceType, baseAddresses);
}
}
public class FooServiceHost : ServiceHost
{
public FooServiceHost(Type serviceType, params Uri[] baseAddresses)
: base(serviceType, baseAddresses) { }
protected override void OnOpening()
{
base.OnOpening();
foreach (ServiceEndpoint endpoint in host.Description.Endpoints)
{
if (!endpoint.IsSystemEndpoint)
{
endpoint.Binding.Namespace = "http://services.bigcorp.com/foo";
}
}
}
}
In your service code, you specify:
[ServiceContract(Namespace="http://your-url")]
public interface IMyInterface { ... }
and you can also specify it for data contracts:
[DataContract(Namespace="http://your-url/data")]
public class MyData { ... }
Besides the obvious change of service/data contract namespaces, you can also set a namespace on the Binding object itself, as well as a namespace on the service description:
Binding binding = new BasicHttpBinding();
binding.Namespace = "urn:binding_ns";
ServiceHost host = new ServiceHost(typeof(MyService), address);
var endpoint = host.AddServiceEndpoint(typeof(IMyService), binding, "");
host.Description.Namespace = "urn:desc_ns";
The latter one is what controls the targetNamespace of the WSDL document itself.
In the end, I used a custom BindingNamespaceAttribute, derived from this example.
If you are using the fileless service activation feature of WCF 4.0 via the serviceActivations config element, then you can override the AddDefaultEndpoints base method in your ServiceHost implementation.
using System;
using System.ServiceModel;
using System.ServiceModel.Description;
namespace MyApp.WS.WCFServiceHost
{
public class MyHostFactory : ServiceHostFactory
{
protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses)
{
return new EDOServiceHost(serviceType, baseAddresses);
}
}
public class MyServiceHost : ServiceHost
{
public EDOServiceHost(Type serviceType, params Uri[] baseAddresses)
: base(serviceType, baseAddresses) { }
public override System.Collections.ObjectModel.ReadOnlyCollection<ServiceEndpoint> AddDefaultEndpoints()
{
var endpoints = base.AddDefaultEndpoints();
foreach (ServiceEndpoint endpoint in endpoints)
{
if (!endpoint.IsSystemEndpoint)
{
endpoint.Binding.Namespace = NamespaceConstants.MyNamespace;
}
}
return endpoints;
}
}
}
Or you could just use config only, the only down side to that is you violate the DRY principle slightly since you now have two points to maintain the namespace string, one in your constants and one in the config file.
In the following example im using the WCFExtrasPlus behaviour to 'flatten' the WSDL. You don't need this if your deploying to a .net 4.5 IIS7 server as you will have access to a flat WSDL anyway which is a new feature built into the 4.5 framework, I digress.
The example also assumes two service contracts and two service behaviour implementations of those contracts.
<system.serviceModel>
<services>
<service name ="MyApp.WS.ServiceBehaviour.Enquiries">
<endpoint bindingNamespace="MyApp.WS" binding="basicHttpBinding" contract="MyApp.WS.ServiceContract.IEnquiries" />
</service>
<service name ="MyApp.WS.ServiceBehaviour.CallLogging">
<endpoint bindingNamespace="MyApp.WS" binding="basicHttpBinding" contract="MyApp.WS.ServiceContract.ICallLogging" />
</service>
</services>
<serviceHostingEnvironment>
<serviceActivations>
<add relativeAddress="Enquiries.svc"
service="MyApp.WS.ServiceBehaviour.Enquiries"
/>
<add relativeAddress="CallLogging.svc"
service="MyApp.WS.ServiceBehaviour.CallLogging"
/>
</serviceActivations>
</serviceHostingEnvironment>
<extensions>
<behaviorExtensions> <!-- The namespace on the service behaviour, the service contract, the data contract and the binding must all be set to the same.-->
<add name="wsdlExtensions" type="WCFExtrasPlus.Wsdl.WsdlExtensionsConfig, WCFExtrasPlus, Version=2.3.1.8201, Culture=neutral, PublicKeyToken=f8633fc5451b43fc" />
</behaviorExtensions>
</extensions>
<behaviors>
<endpointBehaviors>
<behavior>
<wsdlExtensions singleFile="true" />
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior>
<!-- To avoid disclosing metadata information,
set the value below to false and remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="True"/>
<!-- To receive exception details in faults for debugging purposes,
set the value below to true. Set to false before deployment
to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="True"/>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
For reference the service contracts;
[ServiceBehavior(Namespace = NamespaceConstants.MyNamespace)]
public class CallLogging : ICallLogging
{
}
[ServiceBehavior(Namespace = NamespaceConstants.MyNamespace)]
public class Enquiries : IEnquiries
{
}
NB: A namespace does not need http:// in its name. It can be the namespace of your project if you like i.e. MyApp.MyProject.Somthing . See URN
I JSONP enabled my WCF ServiceContract. Client is successfully calling the JSONP Service (OperationContract). I have a number of other OperationContracts (using the same ServiceContract) that I want to expose using basicHttpBinding (SOAP) endpoint - using the same URI. I think my Service WebConfig is set up correctly. When doing such a thing, should I be able to Add the Service Reference (proxy) using the VS "Add Service Reference" dialog window? Or do I need to manually generate client code in codebehind? If I need to manually do it, can anyone provide an example? Or is my Service WebConfig not configured correctly? I am calling the JSONP Service using this: http://Flixsit:1000/FlixsitWebServices.svc/jsonp
Thanks so much...
<system.serviceModel>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" aspNetCompatibilityEnabled="true" />
<behaviors>
<endpointBehaviors>
<behavior name="webHttpBehavior">
<webHttp />
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="DefaultBehaviors">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<webHttpBinding>
<binding name="JSONPBinding" crossDomainScriptAccessEnabled="true" />
</webHttpBinding>
<basicHttpBinding>
<binding name="SOAPBinding" />
</basicHttpBinding>
</bindings>
<services>
<service name="Flixsit.Services.FlixsitWebServices" behaviorConfiguration="DefaultBehaviors">
<clear />
<endpoint name="JSONPEndPoint" address="jsonp"
binding="webHttpBinding"
bindingConfiguration="JSONPBinding"
contract="Flixsit.Services.IFlixsitWebServices"
behaviorConfiguration="webHttpBehavior" />
<endpoint name="HttpEndPoint" address=""
binding="basicHttpBinding"
bindingConfiguration="SOAPBinding"
contract="Flixsit.Services.IFlixsitWebServices" />
<host>
<baseAddresses>
<add baseAddress="http://Flixsit:1000/FlixsitWebServices.svc" />
</baseAddresses>
</host>
</service>
</services>
After tooling around for a while I am creating the ChannelFactory like below (in codebehind). Services are now exposed at both endpoints.
try
{
EndpointAddress address = new EndpointAddress("http://Flixsit:1000/FlixsitWebServices.svc");
WSHttpBinding binding = new WSHttpBinding();
ChannelFactory<IFlixsitWebServices> factory = new ChannelFactory<IFlixsitWebServices>(binding, address);
IFlixsitWebServices channel = factory.CreateChannel();
//call the service operation
var customer = channel.GetCustomers();
GridView1.DataSource = customer;
GridView1.DataBind();
//close the channel
((ICommunicationObject)channel).Close();
//close factory
factory.Close();
}
catch (Exception ex)
{
//log ex;
}
I want to secure some endpoint of a WCF service, i dont know if you can secure some endpoint and some not. Below I have the stripped WCF service (self hosted). The same WCF serves also the CA Policy file. If I secure this WCF service or some endpoints of ut the CA Policy part must not ask me a username password. The policy file must be accessible all the time. Is that also possible?
I found alot WCF custom blogs/postings. There are alot of ways to do security. All I want is that I can secure some endpoints with username/password but the credentials must not be visible with tools like Fiddler. The data however it can be visible in this case.
I implemented already a Customvalidator but the app.config file is also importent to define things. And I am not very good at that.
namespace WindowsFormsApplication11
{
public partial class Form1 : Form
{
public ServiceHost _host = null;
public Form1()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
// Create a ServiceHost for the CalculatorService type and
// provide the base address.
_host = new ServiceHost(typeof(WmsStatService));
_host.AddServiceEndpoint(typeof(IPolicyProvider), new WebHttpBinding(), "").Behaviors.Add(new WebHttpBehavior());
_host.Open();
}
}
// Define a service contract.
[ServiceContract(Namespace = "http://WindowsFormsApplication11")]
public interface IWmsStat
{
[OperationContract]
string getConnectedViewers(string channelName);
[OperationContract]
string sayHello(string name);
}
[ServiceContract]
public interface IPolicyProvider
{
[OperationContract, WebGet(UriTemplate = "/ClientAccessPolicy.xml")]
Stream ProvidePolicy();
}
//[DataContract]
public class Ads
{
// [DataMember]
public string AdFileName { get; set; }
//[DataMember]
public string AdDestenationUrl { get; set; }
public string ConnectedUserIP { get; set; }
}
//
public class CustomValidator : UserNamePasswordValidator
{
public override void Validate(string userName, string password)
{
if(null == userName || null == password)
{
throw new ArgumentNullException();
}
if(userName == "Oguz" && password == "2009")
{
return;
}
FaultCode fc = new FaultCode("ValidationFailed");
FaultReason fr = new FaultReason("Good reason");
throw new FaultException(fr,fc);
}
}
//
public class WmsStatService : IWmsStat, IPolicyProvider
{
public string sayHello(string name)
{
return "hello there " + name + " nice to meet you!";
}
public Stream ProvidePolicy()
{
WebOperationContext.Current.OutgoingResponse.ContentType = "application/xml";
return new MemoryStream(File.ReadAllBytes("ClientAccessPolicy.xml"), false);
}
public string getConnectedViewers(string channelname)
{
// do stuff
return null;
}
}
}
The app.config. This config file does not work. I wanted to put the custom authentication for a endpoint. I have no clue.
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.serviceModel>
<services>
<service name="WindowsFormsApplication11.WmsStatService" behaviorConfiguration="mex">
<host>
<baseAddresses>
<add baseAddress="http://192.168.0.199:87" />
</baseAddresses>
</host>
<endpoint address="http://192.168.0.199:87/Test" binding="basicHttpBinding" bindingConfiguration="" contract="WindowsFormsApplication11.IWmsStat" behaviorConfiguration="MyServiceBehavior" />
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
</service>
</services>
<!--<bindings>
<wsHttpBinding>
<binding name="wshttp">
<security mode="Message">
<message clientCredentialType="UserName" />
</security>
</binding>
</wsHttpBinding>
</bindings>-->
<behaviors>
<serviceBehaviors>
<behavior name="mex">
<serviceMetadata httpGetEnabled="true" httpGetUrl=""/>
</behavior>
<behavior name="MyServiceBehavior">
<serviceCredentials>
<userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType="WindowsFormsApplication11.CustomValidator, CustomValidator" />
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
I want to secure some endpoint of a
WCF service, i dont know if you can
secure some endpoint and some not.
Sure - you just need to create two separate binding configurations, and use one on those endpoints that are secured, the other on the others:
<bindings>
<basicHttpBinding>
<binding name="secured">
<security mode="Message">
<message ...... />
</security>
</binding>
<binding name="unsecured">
<security mode="None" />
</binding>
</basicHttpBinding>
</bindings>
<services>
<service name="WindowsFormsApplication11.WmsStatService" behaviorConfiguration="mex">
<host>
<baseAddresses>
<add baseAddress="http://192.168.0.199:87" />
</baseAddresses>
</host>
<endpoint address="/Secured/Test"
binding="basicHttpBinding" bindingConfiguration="secured"
contract="WindowsFormsApplication11.IWmsStat"
behaviorConfiguration="MyServiceBehavior" />
<endpoint address="/Unsecured/Test"
binding="basicHttpBinding" bindingConfiguration="unsecured"
contract="WindowsFormsApplication11.IWmsStat"
behaviorConfiguration="MyServiceBehavior" />
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
</service>
</services>
Marc
PS: not sure if that's just a problem with your postings not being up to date anymore - have you noticed, that you have two separate behavior configurations:
<behaviors>
<serviceBehaviors>
<behavior name="mex">
<serviceMetadata httpGetEnabled="true" httpGetUrl=""/>
</behavior>
<behavior name="MyServiceBehavior">
<serviceCredentials>
<userNameAuthentication
userNamePasswordValidationMode="Custom"
customUserNamePasswordValidatorType="WindowsFormsApplication11.CustomValidator, CustomValidator" />
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
and your service is only referencing the "mex" behavior? That means, your service is indeed using the <serviceMetadata> behavior - but NOT the <serviceCredentials> one!
You need to merge these into one and then reference just that:
<behaviors>
<serviceBehaviors>
<behavior name="Default">
<serviceMetadata httpGetEnabled="true" httpGetUrl=""/>
<serviceCredentials>
<userNameAuthentication
userNamePasswordValidationMode="Custom"
customUserNamePasswordValidatorType="WindowsFormsApplication11.CustomValidator, CustomValidator" />
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service name="...." behaviorConfiguration="Default"
Marc
If you want to protect entire message, Transport security mode is a way to go. If you want to only your headers to be encrypted/signed, Message security mode allows this, but you'll have to use wsHttpBinding. You may also consider using Digest to protect credentials.
As for your example, I think your commented part should look like this:
<bindings>
<basicHttpBinding>
<binding name="secure">
<security mode="Transport">
<transport clientCredentialType="Basic" />
</security>
</binding>
</basicHttpBinding>
</bindings>
You'll also have to update your endpoint declaration:
<endpoint
address="https://192.168.0.199:87/Test"
binding="basicHttpBinding" bindingConfiguration="secure"
contract="WindowsFormsApplication11.IWmsStat" />
You won't be allowed to use plain HTTP with transport security mode.