this is the first I'm working with PDFs on this level. So please be patient with
my noob question. I understand the logical and physical structure of an PDF file
on a basic level.
I have an PDF that contains a dummy ID that needs to be replaced. To check, if there
is way to do this, I used qpdf to expand the PDF using
qpdf --qdf --object-streams=disable orig.pdf expanded.pdf
Using a hex editor I located the dummy ID in expanded.pdf and changed the value by
simply swapping two digits
<001800180017> Tj => <001700170018> Tj
and saved it. Opening expanded.pdf in Acrobat didn't show the modification. The original
ID 443 is still rendered, but searching for "443" doesn't find it. When searching for
"334", the modified content, I get the rendered original ID 443 highlighted.
The PDF consist of text and vector graphic. When I insert additional digits (which obviously
invalidates the offsets in the xref), I get an error message regarding a missing font and
all digits are shown as dots but the vector graphic is still in place. This seems to indicate
that the ID is not part of the graphic.
What did I miss?
EDIT 1:
After mkl's comment, I did a deeper analysis of my PDF and found, that beside the obvious graphic content, all text was rendered by a series of m/l/c commands follwoed by a BT/ET section. Color for stroke and non-stroke was 0,0,0 for both in the BT/ET section.
Is this because of the used embedded non-standard font?
Are PDFs with embedded fonts usually done this way? A graphics part for the visual representation and a transparent (hidden) text part just to get searching and highlighting capabilities?
Looking back I wonder what I did to get the dots when I first modified the
content. I seems impossible and I can't reproduce it either.
Thanks
Tom
First off, the following is merely guesswork as you could not share the pdf in question. Educated guesswork but guesswork nonetheless.
You report that you changed the value by simply swapping two digits in the text drawing instruction argument and now can successfully search for the value with swapped digits but that Acrobat didn't show the modification.
Furthermore you observed that all text was rendered by a series of m/l/c commands followed by a BT/ET section.
The main situation in which one observes text being rendered as arbitrary vector graphics (a series of m/l/c commands), is in pdfs in which the producer didn't want text extraction to be possible and replaced text drawing instructions by arbitrary vector graphics instructions.
This apparently is not the case in your pdf as the text drawing instructions are not replaced but merely supplemented by the vector graphics ones.
Supposing that this construct is used for a reason and not by accident, I can only assume that the pdf producer was not willing or allowed to embed the font in question but wanted the specific font appearance to be displayed without having to count on the font being installed on the computer the pdf is viewed on.
Thus, the text appearance is drawn using arbitrary vector graphics instructions and the following text drawing instructions actually draw nothing but merely make the text searchable and extractable. This way there is no need to embed the apparent font face as font program. (Text drawing instructions can be made to draw nothing either by using a font with all blank glyphs or by using the text rendering mode "invisible".)
If this assumption turns out to be correct, your task to replace the dummy id requires not merely editing the arguments of the text drawing instructions but also replacing the arbitrary vector graphics instructions showing the dummy id appearance by other instructions showing the actual id.
If you happen to have the font in question and are willing and able to embed it, you can actually replace the arbitrary vector graphics instructions by text drawing instructions using the font. Otherwise be prepared to also draw the actual id as arbitrary vector graphics.
Does anybody know if there is a way to check whether a list of Adobe Acrobat .pdf files contain rotated text (any text not at 0 degrees)?
I thought this would be simple, but I'm struggling to find an answer.
I am using ABBYY Recognition Server to OCR thousands of files and the results are quite poor where the text is rotated. I need to get a list of files that have rotated text to allow me to perform some pre-processing on them.
I usually use iTextSharp for .pdf automation and modification but don't seem to be able to find anything for checking text rotation.
Thanks
You could achieve your goal by extracting all words from these PDFs and checking if any of the words is rotated.
I would recommend you to use a PDF library higher level abilities for the task. Docotic.Pdf library is a good choice (of course, I am one of the developers of the library).
Here is an articles that shows how to extract words from PDFs with extra info about their position etc.
Each extracted word comes in PdfTextData object. The PdfTextData contains IsTransformed property to check if word is rotated, scaled, and / or flipped. You can also analyze PdfTextData.TransformationMatrix for more information about the transformation.
I have several PDF files that have been OCR-processed (not by me). They contain both the scanned image and the OCR text. They seem to work fine in some viewers (iPhone/iPad), but not in others (Preview.app on macOS) which makes them somewhat awkward to read.
From googling around, it seems that the text & image may be layered incorrectly or there is a problem with the fonts used? I'm not even sure I'm using the correct vocabulary, as most hits I get are worthless.
Is it possible to use ghostscript or something to batch-fix these files?
Example of "bad" rendering:
Its impossible to say what's wrong with the PDF file (or viewer) without seeing the PDF file, which alse makes it hard to propose solutions!
You could certainly run the file through Ghostscript to the pdfwrite device, and use the -dFILTERTEXT switch to not process the text. The resulting document would therefore not contain the offending text, but would still contain the image.
Of course, this would then not be possible to search or highlight.
You could instead use -dFILTERIMAGE which would remove the original image leaving the text behind. But then anything in the original document which was not text would now be missing.
The usual 'best practice' is to have the text drawn in rendering mode 3, which makes no marks. This allows you to see the original image without the OCR'ed text interfering. Its possible that the viewer you are using is not honouring the text rendering mode, which would be a (fairly serious) bug in the viewer. The most recent versions of MacOS seems to have some nasty bugs in the Quartz PDF rendering engine.
The other way to do this is to draw the text first, then put the original image on top of it, but that's hard to get wrong, I suspect its more likely the text rendering mode.
EDIT
The PDF file first draws the text, then draws the image on top of the text. The underlying text should not appear. mkl is quite correct in his comment.
The correct way to fix this is to fix the consumer which is rendering it incorrectly. As I mentioned above the latest version of Quartz seems to have some fairly serious bugs, you might choose to raise this as a bug with Apple.
The only other solution would be to run this through something which will remove the text. Ghostscript can do this but there are implications; firstly it will no longer be possible to search/copy/paste text from the document. Secondly you would need to run quite a complex command line in order to prevent the decompressed JPX images being recompressed as JPEG, which would probably result in compromised quality. Finally the resulting file size would be larger.
I have a small PDF file, which is supposed to display just the string "Hello World!".
Unfortunately, it displays black boxes instead of the characters. I suppose there is some problem with the fonts, but I am not sure.
Is there a way to diagnose and troubleshoot this issue? All I see on the Internet is advices to do this and to do that, which helps to some and does not to others (nothing helped me). Looks like shooting in the dark to me.
Here is a concrete example. Why does this PDF display black squares instead of the string Hello World ?
EDIT
A bit of the context. I am trying to convert a trivial HTML to PDF using the wkhtmltopdf tool. It is an absolute frustration, because according to the Internet searches the tool is supposed to work and do it quite well. But the thing does not work for me and nothing I do changes this! Unfortunately, this tool seems the only free tool to convert HTML to PDF. This is a huge bummer.
If you want to find out whether a PDF is valid or what is wrong with it, there are a few general steps you can take:
1) Open it in Adobe Acrobat or Adobe Reader (on a desktop platform, not a tablet device). For a very long time the PDF format was owned by Acrobat and the way their software handles PDF is still close to the gold standard. However, there is a caveat with this; Acrobat is very, very smart in the way it handles PDF files and it will overlook or actively correct a number of mistakes other PDF engines might have a problem with...
2) Get yourself a preflight tool. These tools were invented for use in graphic arts, but have applications outside of it too. Popular examples are callas pdfToolbox (warning, I'm affiliated with this vendor!) or the "Preflight" plug-in you'll find in Adobe Acrobat Pro (which is actually also callas technology under the hood). Then preflight specifically against the PDF/A-1b or PDF/A-2b standard.
That last point deserves some more explanation. You should pick a PDF/A compliant preflight profile because the PDF/A (or PDF for Archival) standard is extremely picky. It's goal is to make sure that PDF files will still be readable in exactly the same way 50 years from now and to ensure that it tests a whole range of properties of the file itself and the different components in it. You might be able to ignore some of the errors you get (because some of them will be connected to the fact that the PDF/A identification isn't correct for example) but I wouldn't ignore any other errors unless you understand exactly what they mean and why they aren't relevant.
PS: Can you make your test file available some other way? The file you shared in your question is useless I think. When I do "Download" I get a PDF file that doesn't contain text and doesn't have fonts in it. Those rectangles you see are exactly that - rectangles. So this PDF renders fine - it's the PDF generation process (or the fact that you stored the file on Google docs - I really have no clue what that might do) that went berserk apparently.
In addition to David's hints (first using a known good viewer and then some preflight tool), there is a third level in the inspection process:
3) Inspect the PDF with your own eyes and with the PDF specification (made available by Adobe here) at hand in a text viewer (for a first impression) and (if the cause of the issue at hand is not immediately visible) then in a PDF browsing tool (for in-depth analysis).
This step is quite cumbersome at first but after some time you learn your way around in the PDFs.
A sample for such a PDF browser tool is RUPS but there are others around, too.
'Small PDF file supposed to display "Hello World!"'
Not correct. The file you linked to does not contain any code that could render pixels on screen or on paper that a human brain would read as "Hello World!". The file indeed does only contain vector drawing operations which result in 12 black boxes.
The command line tool pdffonts does not indicate any font being used in the file:
pdffonts so-file-#15858199.pdf
What could still cause the "rendering" of the words you are looking for: some vector or pixel drawing code contained in the PDF. To find out about this, you'll have to look into the low level source code of the PDF.
The original file is 1.570 Bytes. So this task looks not as being overly huge.
'Is there a way to diagnose and troubleshoot this issue?'
Using qpdf, a "command-line program that does structural, content-preserving transformations on PDF files", you can expand all contained streams (which are normally compressed):
qpdf --qdf --object-streams=disable so-file-#15858199.pdf qdf-#15858199.pdf
The resulting file, qdf-#15858199.pdf, is 3.875 Bytes. Now open it in a text editor. PDF object no. 6 (lines 66-219) contains the contents of the page. Lines 123-194 contain only the operators m (moveto), l (lineto) and h (closepath). These lines contain 12 different groups of drawing commands, where each one represents the path for one of the 12 black boxes you see rendered on screen or printed on paper:
102.400001 12.8000001 m
268.800004 12.8000001 l
268.800004 179.200002 l
102.400001 179.200002 l
102.400001 12.8000001 l
h
Line 196 contains
f
which is the fill operator to actually fill black color into so far constructed (closed) path. Nothing in the other lines (which I didn't analyze in detail) does any drawing that may resemble the shapes of any glyphs.
'Unfortunately, this tool seems the only free tool to convert HTML to PDF'
Not correct either.
1.
Assuming your "free" is meant as free as in liberty, then an alternative option is HTMLDOC.
HTMLDOC does not support specific fonts which may be assigned to your HTML input via CSS, but it does a good job in converting one or multiple HTML documents into a single PDF book containing chapters, page-numbering, page headers and footers and more. For all options available, see its full documentation.
2.
Assuming your "free" is meant as free as in beer, then an alternative option (for private usage only) could be PrinceXML.
PrinceXML does an extraordinarily good job when it comes to support almost all CSS features your HTML document may be using. See its documentation and also some of the sample PDF files produced by PrinceXML.
Is there a library/tool which would list all colours used in a PDF document ?
I'm sure Acrobat itself would do this but I would like an alternative (ideally something that could be scripted).
So the idea is if you have a very simple PDF document with four colours in it the output might say :
RGB(100,0,0)
RGB(105,0,0)
CMYK(0,0,0,1)
CMYK(1,1,1,1)
You could explore the insides with pdfbox, but you would have to write some code to find and catalog all those colors.
Most PDF tools have access to this information but no api to access it. You could take any tool and add it in
Apago PDFspy generates an XML file containing all kinds of metadata extracted from PDF files. It reports color usage including spot colors.
We recently added a function called GetPageColorSpaces(0) to the Quick PDF Library - www.quickpdflibrary.com to retrieve much of the ColorSpace info used in the document.
Here is some sample output.
Resource,\"QuickPDFCS2eb0f578\",Separation,\"HKS 52 E\",DeviceCMYK,0.95,0,0.55,0
Resource,\"QuickPDFCSb7b05308\",Separation,\"Black\",DeviceCMYK,0,0,0,1
Resource,\"QuickPDFCSd9f10810\",Separation,\"Pantone 117 C\",DeviceCMYK,0,0.18,1,0.15
Resource,\"QuickPDFCS9314518c\",Separation,\"All\",DeviceCMYK,0,1,0,0.5
Resource,\"QuickPDFCS333d463d\",Separation,\"noplate\",DeviceCMYK,1,0,0,0
Resource,\"QuickPDFCSb41cafc4\",Separation,\"noprint\",DeviceCMYK,0,1,0,0
Resource,\"Cs10\",DeviceN,Black,Colorant,-1,-1,-1,-1
Resource,\"Cs10\",DeviceN,P1495,Colorant,-1,-1,-1,-1
Resource,\"Cs10\",DeviceN,CalRGB,Colorant,-1,-1,-1,-1
Resource,\"Cs10\",Separation,\"P1495\",DeviceCMYK,0,0.31,0.69,0
XObject,\"R29\",Image,,DeviceRGB,-1,-1,-1,-1
Disclaimer: I work at Atalasoft.
Our product, DotImage with the PDF Reader add-on, can do this. The easiest way is to rasterize the page and then just use any of our image analysis tools to get the colors.
This example shows how to do it if you want to group similar colors -- the deployed example will only work for PNG and JPEG, but if you download the code, it's trivial to include the add-on and get PDF as well (let me know if you need help)
Source here:
http://www.atalasoft.com/cs/blogs/31appsin31days/archive/2008/05/30/color-scheme-generator.aspx
Run it here:
http://www.atalasoft.com/31apps/ColorSchemeGenerator
If you are working with specific and simple PDF documents from a constrained source then you may be able to find the colors by reading through the content stream. However this cannot be a generic solution.
For example PDF documents can contain gradients or transparency. If your document contains this type of construct then you are likely to end up with a wide range of colors rather than a specific set.
Similarly many PDF documents contain bitmapped images. Given that these will need to be interpolated to be displayed at different resolutions, the set of colors in a displayed PDF may be bigger or different to (though obviously broadly similar to) the embedded bitmap.
Similarly many PDF documents contain constructs in multiple color spaces that are rendered into different color spaces. For example a PDF might contain a DeviceRGB bitmap, a line in an ICC based CMYK color and a Lab based rectangle. The displayed version might be in sRGB for display or CMYK for print. Each of these will influence the precise set of colors.
So the only 100% valid answer is going to be related to a particular render of a PDF at a particular resolution to a particular color space. From the resultant bitmap you can determine the colors that have been used.
There are a variety of PDF libraries that will do this type of render including DotImage (referenced in another answer) and ABCpdf .NET (on which I work).