Can someone please point me to a reference about target hooks in MSBuild?
I'm looking for something that will let me define targets to run before and after a specified target. I know this can be done using the DependsOnTargets property but I've seen references to using target hooks and I'd like to explore that area.
Thanks,
Zain
A good list of built-in overridable build process hooks can be found here. For custom targets, the only thing I can think of is to use either the DependsOnTarget attribute (like you mentioned) or the BeforeTargets/AfterTargets attribute (like #Ritch Melton mentioned.) Be careful, the BeforeTargets/AfterTargets are only available in MSBuild 4.0
If you understand the idea behind DependsOnTargets then open up the Microsoft.Common.targets file in the .Net SDK directory (C:\Windows\Microsoft.NET\Framework\v3.5). That file defines the build process for the MSBuild task and .Net projects created by Visual Studio. Look for tags called BeforeXXXX, and AfterXXXX. BeforeBuild and AfterBuild are referenced in the default.csproj file - Snippet:
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
<!-- To modify your build process, add your task inside one of the targets below and uncomment it. Other similar extension points exist, see Microsoft.Common.targets.
<Target Name="BeforeBuild">
</Target>
<Target Name="AfterBuild">
</Target>
-->
</Project>
There are others, like Clean, Rebuild, etc..
Define a Target (or Targets) to execute inside those Target elements, like this (Creates a directory, or list of directories based on the value in the Directories Property:
<Target Name="CreateDir">
<MakeDir Directories="D:\Dogs.txt"/>
</Target>
Then include those Targets in the BeforeXXX Target:
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
<Target Name="BeforeBuild" BeforeTargets="CreateDir">
</Target>
</Project>
Related
When I use msbuild to build a solution containing multiple projects, can I pass a property on the command line in a way that the property will only be used for one of the projects?
That means, can I say that -p:Foo=42 shall be used for Project1, but not for Project2?
MSBuild cannot specify a property for one of the project by the solution file(msbuild xxx\xxx.sln) easily and only targets can be specified. Or you have to type multiple msbuild command line to specify to the related csproj file to enable that changed property like msbuild Project1.csproj -t:build -p:xxx=xxx, msbuild Project2.csproj -t:build. However, it is too complex and inconvenient.
So I recommend that you could use msbuild script to get what you want.
1) create a file called build.proj file:
<Project>
<ItemGroup>
<!--add all the projects from the solution and remove the any project you want to modify the foo property-->
<MostProjectFile Include="**\*.csproj;**\*.vcxproj" Exclude="**\Project1.csproj" />
<!--add any projects you want to modify the foo value-->
<SpecialProjectFile Include="**\Project1.csproj" />
</ItemGroup>
<Target Name="Build">
<!--build the most projects and remove the project which you want to change foo property-->
<MSBuild Projects="#(MostProjectFile)" Targets="Build" Properties="Configuration=Debug"/>
<!--build any projects that wants to modify the foo property separately-->
<MSBuild Projects="#(SpecialProjectFile)" Targets="Build" Properties="Configuration=Debug;Foo=42"/>
</Target>
</Project>
2) if you want to change the foo property again, you can just modify the build.proj based on your needs.
Run msbuild xxx\build.proj -t:Build to build it.
I have a common compile.targets file that is used to build many different solutions. In that file I would like to check if any of the contained projects are using TypeScript, and if they are, verify that certain properties are set in those projects (i.e. TypeScriptNoImplicitAny). I currently build the solution like so:
<Target Name="my-compile-target">
<MSBuild Projects="%(SolutionFile.FullPath)"/>
</Target>
What I would like is to be able to create a task that is run for each .csproj in the solution, that has access to all the properties set in the .csproj.
Is this possible? One workaround I tried was using the BeforeTargets attribute along with the targets I know are used to compile TypeScript:
<Target Name="check-typescript-options" BeforeTargets="CompileTypeScript;CompileTypeScriptWithTSConfig">
<Message Condition="'$(TypeScriptToolsVersion)' != ''" Text="Tools Version is $(TypeScriptToolsVersion)"></Message>
<Message Condition="'$(TypeScriptToolsVersion)' == ''" Text="No tools version found"></Message>
</Target>
Unfortunately, MSBuild gives me a warning that those TypeScript targets do not exist, and thus check-typescript-options is ignored.
As you say you need to "run" in the context of the individual csproj files. To do this, given your setup I would set one of two properties
CustomAfterMicrosoftCSharpTargets or CustomAfterMicrosoftCommonTargets
The easiest way would be to set these like so
<Target Name="my-compile-target">
<MSBuild Projects="%(SolutionFile.FullPath)"
Properties="CustomAfterMicrosoftCSharpTargets=$(PathToCustomTargetProj);" />
</Target>
In this case you would have $(PathToCustomTargetProj) set to some file path which has targets which run within the csproj pipeline. You could set this to compile.targets and then your check-typescript-options will be called as the BeforeTargets will be evaluated and satisfied correctly.
I use the _PublishedApplications to generate the structure in the TFS Build Server. After this, I use the <HeatDirectory> in the WiX project to correctly harvest the content of _PublishedApplications folder. But my problem is the order during build.
If I use the <HeatDirectory> inside <Target Name="BeforeBuild"> it doesn't include the binaries copied to the _PublishedApplications, as the harvesting is executed before the publish (file copy).
If I change the target to BeforeCompile the compilation doesn't succeed because there is no file in first place. Here is the code for the WiX project (the relevant part of it):
<ItemGroup>
<Compile Include="Product.wxs" />
<Compile Include="Autogenerated.wxs" />
</ItemGroup>
<ItemGroup>
<ProjectReference Include="..\SimpleProject\SimpleProject.csproj">
<Name>SimpleProject</Name>
<Project>{GUID}</Project>
<Private>True</Private>
<DoNotHarvest>True</DoNotHarvest>
<RefProjectOutputGroups>Binaries</RefProjectOutputGroups>
<RefTargetDir>INSTALLFOLDER</RefTargetDir>
</ProjectReference>
</ItemGroup>
<Import Project="$(WixTargetsPath)" />
<Target Name="BeforeCompile">
<HeatDirectory OutputFile="Autogenerated.wxs" Directory="$(Sources)"
PreprocessorVariable="var.SimpleProject.TargetDir"
AutogenerateGuids="true" SuppressRegistry="true"
ToolPath="$(WixToolPath)" DirectoryRefId="INSTALLFOLDER"
ComponentGroupName="ComponentGroup_Core"
SuppressRootDirectory="true" />
</Target>
Question
How can I execute the harvesting after the binaries are copied to _PublishedApplications?
I build my solution using the following command:
msbuild SimpleInstaller.sln /p:OutDir=C:\Temp\Output\ /v:diag > C:\Temp\Log.txt
This will output all log to a text file. You can use the MSBuild logger instead.
Then I found when you build a C# project, the target Compile in file Microsoft.Common.targets is invoked. This target has an attribute DependsOnTarget which contains a reference to target BeforeCompile.
I can override this target BeforeCompile in my own C# project, just by adding the following code at the end of it (file .csproj):
...
<Target Name="BeforeCompile">
<!-- custom action. -->
</Target>
</Project>
But the problem is my WiX project cannot override the BeforeCompile target because this target isn't defined for WiX projects. You can check this in the wix2010.targets file. The target Compile only has dependence upon targets PrepareForBuild, ResolveWixExtensionReferences and GenerateCompileWithObjectPath.
My solution was to identify an alternative to BeforeCompile which is the Harvest target. My WiX project (.wixproj) has the following target now:
<Target Name="Harvest">
<HeatDirectory OutputFile="Autogenerated.wxs" Directory="$(Sources)"
PreprocessorVariable="var.SimpleProject.TargetDir"
AutogenerateGuids="true" SuppressRegistry="true"
ToolPath="$(WixToolPath)" DirectoryRefId="INSTALLFOLDER"
ComponentGroupName="ComponentGroup_Core"
SuppressRootDirectory="true" />
</Target>
All this problem occurred because my first project in the solution was the WiX project and only then I added the C# projects. For this reason the BeforeBuild was being executed before everything else.
Another solution to solve this issue is to edit the solution file (.sln) and move the WiX project declaration in the beginning of the solution file to the end of all project declarations (not the end of the solution file). Then the BeforeBuild of the WiX project will be executed after the _PublishedApplications folder is created by the C# project.
This manual edit is required because if you change the Project Build Order you are actually changing the project references (at least in the solution file), but the target BeforeBuild is called anyway before the ResolveProjectReferences which is the responsible for invoking the build of any references.
This is the project declaration that should be after all others:
Project("GUID") = "SimpleInstaller", "SimpleInstaller\SimpleInstaller.wixproj", "GUID"
EndProject
My recommendation is still to use Harvest target as it is independent of any changes in the solution file.
The first thing you need to do is add a project reference from your installer project to your application project. This will force the application to build and be available for your installer project.
You can verify the build sequence of the projects if you right click your solution under VisualStudio and click the "Project Build Order...", if you need to change the order you need to configure the Project dependencies.
Then do something like this in your installer project:
<PropertyGroup>
<RootDir>{PATH TO _PublishedApplications FOLDER}</RootDir>
<HarvestDirectoryNoLogo>true</HarvestDirectoryNoLogo>
<HarvestDirectorySuppressAllWarnings>false</HarvestDirectorySuppressAllWarnings>
<HarvestDirectoryTreatWarningsAsErrors>false</HarvestDirectoryTreatWarningsAsErrors>
<HarvestDirectoryTreatSpecificWarningsAsErrors>
</HarvestDirectoryTreatSpecificWarningsAsErrors>
<HarvestDirectoryVerboseOutput>false</HarvestDirectoryVerboseOutput>
<HarvestDirectoryAutogenerateGuids>false</HarvestDirectoryAutogenerateGuids>
<HarvestDirectoryGenerateGuidsNow>true</HarvestDirectoryGenerateGuidsNow>
<HarvestDirectorySuppressFragments>true</HarvestDirectorySuppressFragments>
<HarvestDirectorySuppressUniqueIds>false</HarvestDirectorySuppressUniqueIds>
</PropertyGroup>
<Import Project="$(WixTargetsPath)" />
<Target Name="BeforeBuild">
<ItemGroup>
<HarvestDirectory Include="$(RootDir)">
<Transforms>
</Transforms>
<ComponentGroupName>MyComponent</ComponentGroupName>
<DirectoryRefId>WebSiteRoot</DirectoryRefId>
<PreprocessorVariable>var.RootDir</PreprocessorVariable>
<SuppressCom>false</SuppressCom>
<SuppressRegistry>false</SuppressRegistry>
<SuppressRootDirectory>true</SuppressRootDirectory>
<KeepEmptyDirectories>true</KeepEmptyDirectories>
</HarvestDirectory>
</ItemGroup>
<HeatDirectory
NoLogo="$(HarvestDirectoryNoLogo)"
SuppressAllWarnings="$(HarvestDirectorySuppressAllWarnings)"
SuppressSpecificWarnings="$(HarvestDirectorySuppressSpecificWarnings)"
ToolPath="$(WixToolPath)"
TreatWarningsAsErrors="$(HarvestDirectoryTreatWarningsAsErrors)"
TreatSpecificWarningsAsErrors="$(HarvestDirectoryTreatSpecificWarningsAsErrors)"
VerboseOutput="$(HarvestDirectoryVerboseOutput)"
AutogenerateGuids="$(HarvestDirectoryAutogenerateGuids)"
GenerateGuidsNow="$(HarvestDirectoryGenerateGuidsNow)"
OutputFile="$(IntermediateOutputPath)_%(HarvestDirectory.Filename)_dir.wxs"
SuppressFragments="$(HarvestDirectorySuppressFragments)"
SuppressUniqueIds="$(HarvestDirectorySuppressUniqueIds)"
Transforms="%(HarvestDirectory.Transforms)"
Directory="#(HarvestDirectory)"
ComponentGroupName="%(HarvestDirectory.ComponentGroupName)"
DirectoryRefId="%(HarvestDirectory.DirectoryRefId)"
KeepEmptyDirectories="%(HarvestDirectory.KeepEmptyDirectories)"
PreprocessorVariable="%(HarvestDirectory.PreprocessorVariable)"
SuppressCom="%(HarvestDirectory.SuppressCom)"
SuppressRootDirectory="%(HarvestDirectory.SuppressRootDirectory)"
SuppressRegistry="%(HarvestDirectory.SuppressRegistry)" />
</Target>
</Project>
I generated this code based on the documentation of the HeatDirectory Task and I use it in real projects.
Solution1.sln contains two projects:
ProjectA.csproj
ProjectB.csproj
ProjectB has a custom target called "Foo". I want to run:
msbuild Solution1.sln /t:Foo
This will fail because ProjectA doesn't define the "Foo" target.
Is there a way to make the solution ignore the missing target? (E.g., do nothing if the target doesn't exist for a specific project) without modifying the SLN or project files?
There is a two-part solution if you don't want to edit the solution or project files and you're happy for it to work from MSBuild command-line but not from Visual Studio.
Firstly, the error you get when you run:
MSBuild Solution1.sln /t:Foo
Is not that ProjectA does not contain a Foo target but that the solution itself does not contain a Foo target. As #Jaykul suggests, setting the MSBuildEmitSolution environment variable will reveal the default targets contained within the solution metaproj.
Using the metaproj as inspiration you can introduce a new file "before.Solution1.sln.targets" next to the solution file (the file name pattern is important) with contents like this:
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Target Name="Foo">
<MSBuild Projects="#(ProjectReference)" Targets="Foo" BuildInParallel="True" Properties="CurrentSolutionConfigurationContents=$(CurrentSolutionConfigurationContents); SolutionDir=$(SolutionDir); SolutionExt=$(SolutionExt); SolutionFileName=$(SolutionFileName); SolutionName=$(SolutionName); SolutionPath=$(SolutionPath)" SkipNonexistentProjects="%(ProjectReference.SkipNonexistentProjects)" />
</Target>
</Project>
The MSBuild element is mostly just copied from the solution metaproj's Publish target. Adjust the target name and any other details to suit your scenario.
With this file in place, you'll now get the error that ProjectA does not contain the Foo target. ProjectB may or may not build anyway depending on inter-project dependencies.
So, secondly, to solve this problem we need to give every project an empty Foo target which is then overridden in projects that actually already contain one.
We do this by introducing another file, eg "EmptyFoo.targets" (name not important) that looks like this:
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Target Name="Foo" />
</Project>
And then we get every project to automatically import this targets file either by running MSBuild with an extra property, eg:
MSBuild Solution1.sln /t:Foo /p:CustomBeforeMicrosoftCommonTargets=c:\full_path_to\EmptyFoo.targets
Or include the CustomerBeforeMicrosoftCommonTargets property in the Properties attribute on the MSBuild element in the first targets file where you could optionally specify the full path relative to the $(SolutionDir) property.
However, if you're willing to run Foo in conjunction with any of the default solution targets (ie Build, Rebuild, Clean, or Publish) you could take some inspiration for how the Web Publishing Pipeline in MSBuild uses the DeployOnBuild property to call the Publish target on Web projects in a solution containing other project types that don't support publishing.
More info on the before.Solution1.sln.targets file here:
http://sedodream.com/2010/10/22/MSBuildExtendingTheSolutionBuild.aspx
You can target those by project name, like /t:project:target (might need quotes, I can't remember).
You can find all the generated targets by setting the environment variable MSBuildEmitSolution = 1 ... which causes msbuild to save to disk the temp .metaproj file which it generates for your solution. That file has all those targets defined in it, just open it up and take a look ;)
Maybe not the best answer but a reasonable hack.
msbuild ProjectA.csproj
msbuild ProjectB.csproj /t:Foo
When msbuild building solution - msbuild emits only limited set of targets into it's .metaproj file, and afaik - you can't build custom target through building sln file, you have to use original project1.csproj or custom build script.
Just for reference:
Use ContinueOnError when using MSBuildTask or -p:ContinueOnError=ErrorAndContinue when using (dotnet) msbuild
It may be in limited scenarios helpful: For example you have a list of .csproj files and want attach metadata only to specific project file items then you could write something like this:
<Target Name="UniqueTargetName" Condition="'$(PackAsExecutable)' == 'Package' Or '$(PackAsExecutable)' == 'Publish'" Outputs="#(_Hello)">
<ItemGroup>
<_Hello Include="$(MSBuildProjectFullPath)" />
</ItemGroup>
</Target>
<Target Name="BuildEachTargetFramework" DependsOnTargets="_GetTargetFrameworksOutput;AssignProjectConfiguration;_SplitProjectReferencesByFileExistence"
Condition="$(ExecutableProjectFullPath) != ''">
<Message Text="[$(MSBuildThisFilename)] Target BuildEachTargetFramework %(_MSBuildProjectReferenceExistent.Identity)" Importance="high" />
<MSBuild
Projects="%(ProjectReferenceWithConfiguration.Identity)"
Targets="UniqueTargetName"
ContinueOnError="true">
<Output TaskParameter="TargetOutputs" ItemName="_Hallo2" />
</MSBuild>
<Message Text="[$(MSBuildThisFilename)] ########### HELLO %(_Hallo2.Identity)" Importance="high" />
</Target>
Some of my .csproj project files have special target "AssembleJS" that merges all .js files included in project in one big file (i.e. webcontrols.csproj has target "AssembleJS" with output "webcontrols.js").
So if I have project parts.csproj
That has target AssembleJS.
References project webcontrols.csproj.
References utility project utils.csproj that does not have any JavaScript and does not have AssembleJS target.
I want target AssembleJS of parts.csproj execute AssembleJS in webcontrols.csproj (the same was as MSBuild works with standard Build target).
Something like
<MSBuild Project="#ReferencedProjects" Targets="AssembleJS"/>
does not work because utils.csproj does not have target AssembleJS.
Is there any way to filter #ReferencedProjects based on whether project has certain target?
Any other idea on how to handle this scenario?
You cannot do what you are requiring. But you might be able to acheive it with batching.
<Project xmlns=''>
<ItemGroup>
<ReferencedProjects Include="webcontrols.csproj">
<Type>Web</Type>
</ReferencedProjects>
<ReferencedProjects Include="utils.csproj">
<Type>NonWeb</Type>
</ReferencedProjects>
</ItemGroup>
<Target Name="BuildWebProjects">
<MSBuild Projects="#(ReferencedProjects)" Condition=" '%(ReferencedProjects.Type)' == 'Web' " />
</Target>
</Project>
Do a search for MSBuild Batching and find some results on sedodream.com for more
info.
Should I expand on this?