I have one user who gets the following error when trying to login, "Silverlight client load operation failed for query "Login". [GenericParameterNotValid]". The odd thing is that other users are able to login without issue and I can login using the "problem" account from other machines.
At this point I think it's got to be a client side configuration issue.
My next step is to confirm the Client Side Silverlight Version, but I don't know where to go after that.
Do you have any suggestions?
Install Silverlight Developer runtime on the client to get more details on the error.
Try deleting the user's profile.
This thread might help you.
Just leaving a breadcrumb here. We had the following error in a Silverlight RIA Services application attempting to login:
Load operation failed for query 'Login'. Error in deserializing body of the request message for the operation 'Login'. The OperationFormatter could not deserialize any information from the Message because the Message is empty (IsEmpty = true).
This was in Server 2003 with IE 8. Turns out a restart of the browser made the problem go away! Very frustrating.
Related
I have a WCF application which consists in some async communications with ecternal services. When we start a new expedient, a new instance is created; it process data and send an xml to a external service and waits for the response. This response requires that a person review the xml and send the response so it usually it is delayed for a long time. For this reason, the workflow go to idle and we use persistence with AppFabric.
The fact is that sometime, when we receive the response, the next exception is raised:
The execution of the InstancePersistenceCommand named {urn:schemas-microsoft-com:System.Activities.Persistence/command}LoadWorkflowByInstanceKey was interrupted by an error.
Normally this error does not occur, it can occur very sporadically. However, we are trying to update the app to include a new functionality (it does not modify the workflow) but when the application is deployed to the server, the instances that were created with the old deployment and were waiting for the response, throw this exception when they receive the response from the external service. However, the instances initiated with the new deployment process the response without problem.
I have been looking for information about this problem but I haven't found much. Anybody can help me?
SOLUTION:
Thanks a lot for your answer, it may be helpful for me in the future. In this case, the problem was that I was updating an assembly version of one of the implicated project (to upload a nuget package) and for a reason that I don’t understand, the instances created with an old version raised this exception when the service with the new version had to manipulate the mentioned instances.
If I change the assembly version to upload the nuget and then set the original version and deploy with this version, everything works ok. Anybody knows what is the reason?
Thanks a lot.
This may be because there is a program running in the background and trying to extend the lock on the instance store every 30 seconds, and it seems that whenever the connection to the SQL service fails, it marks the instance store as invalid.
You can try <workflowIdle timeToUnload="0"/>, if it doesn't work you can look at the methods provided by other links.
Windows workflow 4.0 InstancePersistenceCommand Error
Why do I get exception "The execution of the InstancePersistenceCommand named LoadWorkflowByInstanceKey was interrupted by an error"
WF4 InstancePersistenceCommand interrupted
Whenever I try to log into github from IntelliJ, I get this error.
Even thought my authentication data is correct, it tells me it's not. And it doesn't matter if I use a token or just use my credentials. I get the same problem. I've tried to delete all tokens and generated a new one, this also didn't change anything. What could be the problem? Thanks.
The issue might be caused by some proxy in the middle. Invalid authentication data is a generic message that appears when call to GitHub API fails without clear reasons. Connection reset seems to be the real message, and could be caused by some proxy or network firewall.
Check the logs for more details on the error. If you think it is some bug in IntelliJ, it is worth reporting the issue to http://youtrack.jetbrains.com/ with logs attached.
I am trying to create a WebSocket client through WebSocket4Net with port 4503.However i could see the the WebSocket status only as "Connecting" as it is neither raising any exceptions nor proceeding further.I was able to throw the Exception OnError Event which states that
"An attempt was made to access a socket in a way forbidden by its access permissions"
Am i missing anything?. Any suggestions or link will be much helpful.Thanks in advance.
ws = new WebSocket("ws://localhost:4503/WSServer");
ws.Opened += new EventHandler<EventArgs>(ws_Opened);
ws.Open();
I've been getting this kind of error today with a different type of socket library. This may be an access permissions problem in Silverlight, but on the server side, I found that I had to shut down Visual Studio, and then launch it with admin permissions in order to start up the service. It's going to be something like that. If it is a Silverlight access permissions thing, you will want to try running it out of browser and turning on elevated trust.
I'm about a month away developing my silverlight application (this is my first). Everything went rather smoothly until today, when out of the blue I started getting this message:
An error occurred while trying to make a request to URI 'http://localhost:2682/Services/Authentication/LoginService.svc'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details.
I'm using WCF Services and this issue never appeared until now.
I've added a clientdomain.xml and clientaccesspolicy.xml file to my [projectname].web folder, and re-wrote them about a 1000 different ways.
I've also used Fiddler and it shows me that the error is on both those files, the error is
[Fiddler] The socket connection to localhost failed. ErrorCode: 10061. No connection could be made because the target machine actively refused it 127.0.0.1:2682
I've searched the error "10061" and it has to do with socket definition. But I couldn't find any solution to that.
Don't know if it has anything to do with it, but my "ASP.net Development Server" port is 6939.
Keep in mind that the app has NOT been deployed, so this is only happening locally. I'm using MS VS 2010 and MS SQL Server 2008.
Am I doing anything wrong or is this a silverlight issue??
On a last note, I haven't changed anything on Port, socket or service configuration. Last thing I was doing was editing a XAML file on client side and and the app started throwing me this error.
Need help, can't do anything until this is solved!!!!
Thanks.
i think you are using you app on localhost and a dynamic port is getting assigned and this port is not fixed and every run and that causes the refuse problem. if you want to fix this, create a solid url for example,
http://localhost/apps/Services/Authentication/LoginService.svc
Well, last night, just before I went to bed, I noticed something odd. In my "ServiceReferences.ClientConfig" file, the endpoint ports for each one of my services where diferent from the ones the silverlight machine used, so going on a hunch (and because I was reaching my sanity breakpoint) I decided to eliminate all my Service References and re-add them again.
I worked... go figure. Still don't know why this happened and if anyone could shed some light on the subject, I would appreciate it. It's kinda of annoying having to re-add all my services references. Right now I have only 6 of them, but in the near future they may go over 20, and if this happens again... well, it's going to be a real pain...
Thanks
I get this error when I attempt to run the wcftestclient application: "The client was unable to retrieve service metadata..."
What is odd that this happens when I load the program; before the UI to choose which service to connect to is loaded. I presume it's "helpfully" remembering the last service to which I connected, unfortunately this is no longer running and I have no idea what it could be (since the wcftestclient exits when this error pops up).
Does any one know where it may be storing this information and how I would go about deleting it?
If you launch the application from the command line, passing in the URI of the service you want to test it works fine.
Check this folder on your machine:
C:\Documents and Settings*User*\Local Settings\Application Data\Temp\Test Client Projects
All your clients are saved there.