hi
While installing sql server 2005 i got an error as
None of the selected features can be installed or upgraded. Setup cannot proceed since no effective change is being made to the machine. To continue, click Back and then select features to install. To exit SQL Server Setup, click Cancel.
I have uninstalled sql server 2005,sql native client ,sql support files.
but i got the same error.Am struggling lot with this error.help me out.
Maybe you could try:
check if you installed SQL Server Express first, then Uninstall SQL Server and Express, then re-install SQL Server.
run the setup.exe from the SQL installation source from your Run command with the parameter SKUUPGRADE=1 or UPGRADE=1.
Related
I'm trying to install SQL Server 2005 on my Win10 x64.
The problem is I can't even select the Database Services and Reporting services I need cause checkbox is disabled.
I had a bit research on this issue but everyone else seems to have problems after the installation began, whereas, I can't even start the progress.
I tried Run program made for previous versions of windows and extract then install sqlncli.msi from SP4 according to this.
Neither of them enable the checkboxes and I'm running out of ideas.
Should I install sp4 without install SQL Server first? Any suggestion would be appreciated.
I had the Visual Studio subscriptions and turns out you can still download the original version of SQL Server 2005 by downloads search(autocomplete won't show it but the search result will).
And the checkboxes are enabled in this version.
If you face problem during the installation, this works for me.
I have a student who installed SQL Server 2014 with tools, but the Management Studio part did not install. There is no SSMMS.EXE on the machine.
So I tried to reinstall it, and the Management Studio tools come up checked but grayed out, so the SQL Installer will not let me make any changes.
So I tried to uninstall SSMS from the control panel-->uninstall programs. However, it was not there.
So I uninstalled all SQL Server programs, then I killed all running instances, then I deleted all the MSSQLServer files under both program files and program files (x64). Then I updated Visual Studio 2010. Then I tried to reinstall SQL Server.
Again, the tools appeared, but they were checked and grayed out.
Soooo. SQL server thinks the SSMS tools are installed and thus will not let me reinstall them. However, they are not installed, so I cannot remove them.
Any idea how to convince SQL server that the tools are in fact absent?
Caution incomplete answer but several more things to try:
1) Could you provide the link to the download you're using - potentially SQL Server management studio (SSMS) is not included so thus can't be installed? From reading the FAQ's this looks to be the case (http://msdn.microsoft.com/en-us/data/hh322942)
Try this link for installing http://www.microsoft.com/en-us/download/details.aspx?id=29062
2) Another thread covers a potentially related instance where express was also installed and caused a block to install SSMS.
(Can't install SQL Server 2008 R2 management tool (complete))
3) A long shot would be if anything is left over in the registry which is causing the block. See if there is still and entry in [HKEY_CURRENT_USER\Software\Microsoft\Microsoft SQL Server] and if so rename to "_bkp"
The last two suggests are long shots but you could try:
4) Try repairing the installation: http://msdn.microsoft.com/en-us/library/cc646006.aspx
5) Try installing as logged in as another user.
I tried to install SQL Server 2005 Express SP3 x64 on Windows 8 but the installer gives me an error:
An installation package for the product Microsoft SQL server native
Client cannot be found. Try the installation again using a valid copy
of the installation package 'sqlncli_x64.msi'
How can I solve the problem?
I had the same problem. But I also had to perform additional steps. Here is what I did.
Perform the following steps (Only 64bit version of SQL Server 2005 Developer Edition tested on Windows 8 Pro 64bit)
Extract sqlncli.msi / sqlncli_x64.msi from SP3 or SP4. I did it from SP4
Install sqlncli
Start SQL Server 2005 Setup
During setup I received an error
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
Don't click cancel yet. From an installation of SQL Server 2005 SP3 or SP4 copy SQLSERVR.EXE and SQLOS.DLL files and put them in your SQL install folder.
Click RETRY
For STEP 5 above: Although I didn't try looking into SP4 / SP3 setup for SQLSERVR.EXE and SQLOS.DLL but if you don't have an existing installation of SQL Server 2005 SP3/SP4 then maybe try looking into the SP3/SP4 EXE (Compressed file). I am not sure if this may help. In any case you can create a VM and install SQL Server 2005 with SP3/Sp4 to copy the files for Windows 8
I had a different experience loading SQL Server 2005 Express on Windows 8. I was using the installer that already had SP4 applied so maybe that explains the difference. The first error I received was when Setup tried to start the SQL VSS Writer. I just told it to Ignore and it continued. I then ran into the same error Sohail had where the SQL Server service failed to start. There was no point in following the rest of Sohail's method since I already was using a SP4 version of SQLServr.exe and SQLOS.dll. Instead, I just canceled the install rebooted the machine and ran the install again. Everything ran fine the second time around.
The place I found Sohail's technique invaluable was when I needed to install SQL Server 2005 Standard on Windows Server 2012. We have a few new servers we're looking to roll out with Windows 2012 but we didn't feel the need to upgrade SQL Server since the 2005 version has all the functionality we need and the cost to license SQL 2012 on these boxes would have been a 5-figure sum.
I wound up tweaking Sohail's technique a bit by adding steps to revert the SQLServr.exe and SQLOS.dll files so that I could then apply SP4 fully. Below are all the steps I took starting from a scratch install of Windows Server 2012 Standard. I hope this helps anyone else looking to get a fully updated install of SQL Server 2005 x64 on this OS.
Use Server Manger Add roles and features wizard to satisfy all of SQL's prerequisites:
Select the Web Server (IIS) Role
Add the following additional Web Server Role Services (note that some of these will automatically pull in others, just accept and move on):
HTTP Redirection
Windows Authentication
ASP.NET 3.5 (note that you'll need to tell the wizard to look in the \Sources\SxS folder of the Windows 2012 installation media for this to install properly; just click the link to "Specify an alternate source path" before clicking Install)
IIS 6 Metabase Compatibility
IIS 6 WMI Compatibility
Start SQL Server 2005 Install, ignoring any compatibility warnings
If SQL Server service fails to start during setup, leave dialog up and do the following:
Backup SQLServr.exe and SQLOS.dll from C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn
Replace those two files from a working copy of SQL Server 2005 that already has had SP4 applied (alternatively, extract them from the SQL Server 2005 Service Pack 4 distributable using 7-Zip, here's a helpful write-up.)
Return to setup, hit Retry and setup will now run to completion.
Stop SQL Service and restore orignal versions of SQLServr.exe and SQLOS.dll (or else SP4 doesn't think it is needed in the next step)
Install SQL Server 2005 SP4
Install SQL Server 2005 SP4 Cumulative Hotfix 5069 (Windows Update wasn't offering this for some reason so I had to download and install manually)
If you want the latest documentation, install the latest version of SQL Server 2005 Books Online.
Microsoft says the SQL Server 2005 it's not compatible with Windows 8, but I've run it without problems (only using SP3) except the installation.
After you run the install file SQLExpr.exe look for a hidden folder recently created in the C drive. Copy the contents to another folder and cancel the installer (or use WinRar to open the file and extract the contents to a temp folder)
After that, find the file sqlncli_x64.msi in the setup folder, and run it.
Now you are ready the run the setup.exe file and install SQL server 2005 without errors
I found that on Windows 8.1 with an instance of SQL 2014 already installed, if I ran the SQLEXPR.EXE and then dismissed the Windows 'warning this may be incompatible' dialogs, that the installer completed successfully.
I suspect having 2014 bits already in place probably helped.
install "SQL Express 2005 service pack 4" version "directly".
it contains sql Express 2005 inside . dont let the name fool you
runs succesfuly. from my experince
Microsoft SQL Server 2005 Express Edition Service Pack 4 on Windows Server 2012 R2
Those steps are based on previous howto from https://stackoverflow.com/users/2385/eduardo-molteni
download SQLEXPR.EXE
run SQLEXPR.EXE
copy c:\generated_installation_dir to inst.bak
quit install
run inst.bak/setuip/sqlncli_x64.msi
run SQLEXPR.EXE
enjoy!
This works with Microsoft SQL Server 2005 Express Edition Service Pack 4 http://www.microsoft.com/en-us/download/details.aspx?id=184
I have a problem with SQL Server 2005.
I have a Computer with Windows 7 x64 bits installed and I want to run SQL Server 2005 correctly. The first time I try it, i did the follow:
1) Install SQL Server 2005
2) Install SQL Server 2005 Service Pack 3 x64
And it works!
But now (for reasons that are irrellevant) I need to uninstall all and re-install again to check the steps.
So I went to Add/remove programs of Windows and uninstall all the SQL Server things that I found. After, I did the same steps that I said before, but... it didnt work! What's going on?
I saw that the uninstall of SQL Server 2005 seems that it didnt go well because i can find the instance of SQLExpress... and i read that Service Pack of SQL Server cant uninstall.
But... how can remove ALL SQL Server 2005 things, to start again the installation like i did the first time?
Thanks
If you want to know how to remove the instance you can see here how to do it manually. Another resources is here and here.
I am facing the problem of finding SQL Server Profiler in SQL Server 2005. Is there are any options to enable it or to reinstall it?
Two possibilities.
First, you're running Sql Server Express. That doesn't come with Profiler. In that case, you can use this tool, which is an open source version that is pretty good. I've used it a few times myself (not associated with the project, spamflaggers).
Else, you need to rerun the installer and add Profiler. If it didn't get installed, it has to be installed. That's the general state of things in the software world.
You can select SQL Server Profiler from the Tools menu in SQL Server Management Studio.
The file is located on my computer under:
"C:\Program Files\Microsoft SQL Server\90\Tools\Binn\PROFILER90.EXE"
If its not there you may have to select the client tools from the SQL Server installer.
Simply navigate to add/remove programs, and click 'change' on the SQL Server 2005.
I had the same problem and it was because I had installed Management Studio Express before I installed the full version. You can't have more than one instance of Management Studio, therefore, it won't install the full version over the express version. I found that I had to remove the express SSMS and then install the full SSMS:-
Go to Control Panel/Programs and Features (in Windows 7)
At "Select an instance", choose "Remove Shared Features Only"
Choose "Management Tools - Basic"
You can then run the installer again and install the FULL SSMS. Dunno if this was the problem you were having, but hopefully someone finds it useful.