When Biztalk 2009 calls a regular ASP.NET webservice via an WS BasicHTTP adapter, it gets a System.ServiceModel.Security.MessageSecurityException: the HTTP request is unauthorized with client authentication scheme "Anonymous". The authentication header received from the server was : Negotiate NTLM".
The webservice is hosted in IIS (7.5), with anonymous access disabled, and Windows Authentication enabled.
Your send port needs to be configured to use NTLM security, as that appears to be what the web service requires.
Open the send port's configuration, open the transport type's (WCF-BasicHttp) configuration, and go to the Security tab. There, set the security mode to Transport. That will allow you to set the Transport client credential type to Ntlm.
This will cause BizTalk to authenticate to the web service using NTLM. It will use the account of the BizTalk host in which your send port is running. If that account does not have access to the web service, then you'll either need to grant it access or look at alternatives, such as switching from NTLM to Basic (which allows you to specify the credentials under that same Security tab). A discussion about this issue is here.
Of course, you did mention that you configured the web service for Windows Authentication, so you can also try setting the Transport client credential type to Windows. That should still use the BizTalk host process's account, though, just like NTLM.
FWIW here's a paste of a WCF basicHttpBinding exposed to BizTalk 2009
<services>
<service ... >
<endpoint address=""
binding="basicHttpBinding"
bindingConfiguration="binding4BizTalk"
bindingNamespace="xxx"
... >
<!-- Delete the identity tag here -->
</endpoint>
And then under the bindings
<bindings>
<basicHttpBinding>
<binding name="binding4BizTalk" ...>
<security mode="None" />
Hope is of some use?
Related
I built a WCF Service in one of my machines of my local network, it has both http and net.tcp (htpp,net.tcp) as enabled protocols in IIS manager.
From another machine a build a client app, and define the endpoints automatically using the Add Service Reference... dialog, I type the service address and when it appears I set the name and click OK. The App.config is updated with two endpoints, one for http (BasicHttpBinding) and the other for net.tcp (NetTcpBinding) as expected.
When running the client app, if I use the BasicHttpBinding:
"using (var proxy = new ProductsServiceClient("BasicHttpBinding_IProductsService"))"
it runs OK, and shows the expected data.
But when I use the NetTcpBinding:
"using (var proxy = new ProductsServiceClient("NetTcpBinding_IProductsService"))"
It throws a SecurityNegotiationException saying that:
"A remote side security requirement was not fulfilled during authentication. Try increasing the ProtectionLevel and/or ImpersonationLevel."
If I do it all in the same machine, I don´t get any exception.
What should I do?
Rafael
By default, the BasicHttpBinding supports no security. So when calling the service from another computer, it will work also.
But by default, NetTcpBinding requires a secure channel. And the default security mode is Transport, so when calling the service from another computer, it will throw a security exception.
The most easy way to solve it is to set the security mode to None as following:
<bindings>
<netTcpBinding>
<binding name="netTcpBindingConfiguration" >
<security mode="None" />
</binding>
</netTcpBinding>
Then we use it in the endpoint
<endpoint address="net.tcp://nelson-laptop:8080/Whatever"
binding="netTcpBinding"
bindingConfiguration="netTcpBindingConfiguration"
contract="ProductsService.IProductsService"
name="NetTcpBinding_IProductsService" />
In Your question you are using the default net.tcp port 808 but have opened port 80 in the firewall. If it is not a typo in the question it could be why it fails.
The server is in workgroup (not domain). The self-hosted WCF service is configured with Windows security. Binding is netTcpBinding.
<security mode="Transport">
<transport clientCredentialType="Windows" protectionLevel="EncryptAndSign" />
</security>
The WCF client runs on the same server.
A server certificate is used to encrypt traffic (probably it does not matter)
I implemented a simple test program. Everything works fine.
But when I implement it in our product, client cannot login. In event log I see an Audit Failure:
Failure Information:
Failure Reason: An Error occured during Logon
Status: 0xc000006d
Sub Status: 0x0
By googling I located this page for workaround: http://support.microsoft.com/kb/896861
After disable loopback check in registry, the logon succeed.
But I don't want to disable loopback check security in production environment. I need to find out the cause of this problem.
My question is: why my test program works fine but the product, which exposes multiple endpoints, hits the problem with loopback check security? Is there some WCF component/configuration that causes this problem?
More info: For testing I created a simple wcf client against my product. The test client call is authenticated successfully with loopback check enabled. Seems to me the problem is at wcf client side... Any idea?
Found my issue: I used a self-signed certificate with CN="WCF Security". The endpoints on both server and client have "identity" defined as:
<identity>
<dns value="WCF Security" />
</identity>
After changing to
<dns value="localhost" />
or even completely removing "identity", logon now succeeds without disabling Loopback Check Security.
I don't fully understand the relationship between the endpoint identity and certificate CN though.
TL;DR version is at the bottom.
I have constructed three WCF web services -- one that's using .NET 4 and two that's using .NET 3.5 -- that is consumed by an Android client. The Android client performs the calls using ksoap2-android. When the services were complete and the client could make all the calls and get all the data from the services, we decided to activate HTTPS communication for the web services. They are hosted on a server running IIS.
I'm not alone on this task. I work full-time with it, mainly the Android client. I have two coworkers, both of which have a lot of other responsibilities. The first is mostly involved in the services and the second is mostly involved in the server.
I've read a lot of guides, blogs and articles on the Internet on how to enable HTTPS for a WCF web service, but still I haven't been able to completely resolve this. For the Android client to be able to consume the client, we are limited to using the basicHttpBinding, since the wsHttpBinding contains some security details that are not supported by Android, or something. I'm not sure, but I read it some forum somewhere. If I'm wrong, I'd happily be corrected!
Okay, so I'll give a short account of what I've done so far:
I've enabled transport security, this is how the binding(s) looks:
<bindings>
<basicHttpBinding>
<binding name="basicHttp" closeTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00">
<security mode="Transport">
<transport clientCredentialType="None" />
</security>
</binding>
</basicHttpBinding>
</bindings>
I've enabled meta data publishing over HTTPS using this line of code:
<serviceMetadata httpsGetEnabled="true" />
and this:
<endpoint address="" binding="mexHttpsBinding" contract="IMetadataExchange" />
Also, my second coworker has installed a trusted certificate (a real certificate from a CA) on the IIS server and added a https binding on the server.
Okay, so far, so good. Now we could connect to the services in the browser.
When we had done this it was possible to visit the service in the browser in a secure, encrypted, manner.
The problem is that it isn't possible to make a call to the service, neither in Android nor WCF Test Client. If I call the service on the https address, I get a 404 in response. WCF Test Client returns this:
There was no endpoint listening at https://[my service address] that could accept the message. This is often caused by an incorrect address or SOAP action.
To be able to debug this, I'm using Wireshark to intercept the messages and see what really happens. I've found out that after the set up procedures (handshake, establishing trust etc.) the client sends the header and get a 101 Continue in response, after which it POSTs the body. This should be normal behavior. But then the service returns 404 Not Found. Wireshark says that the full request URI is the http address. I've configured the server to use the https address, so why does it make a call to the http address?
I've tried setting the address and listenUri attribute of the endpoint to https and http respectively and the other way around. If I do that, the server answers the request with 405 Method Not Allowed.
Is there any way to solve this? What am I missing?
What am I missing?
TL;DR version below
I'm hosting three WCF SOAP web services with IIS, one using .NET 4 and the others using .NET 3.5. I'm trying to make a call from the WCF Test Client over HTTPS. I've enabled transport security, meta data publishing over HTTPS, installed a trusted certificate and added a https binding on the server.
When I try to make a call from WCF Test Client it says that there was no endpoint listening at the address. Wireshark tells me it makes the call to the http version of the service (i.e. "http://[my address]" instead of "https://[my address]"), although it is configured to call the https address. The service returns 404 Not Found. If I set the address of the service to https and listenUri to http, I get 405 Method Not Allowed. If I do it the other way around it says that it cannot be activated. What am I missing?
I solved this by removing the endpoint and using the <protocolMapping> tag, like this:
<protocolMapping>
<add scheme="https" binding="basicHttpBinding" bindingConfiguration="basicHttps" />
</protocolMapping>
Details about my service:
A file upload service
Transfermode is set to stream
Service is hosted in IIS 7.
I need to provide secuirty to my service. I have tried with ntlm and windows secuirty.I was getting the following error when i am trying to secure my service
"HTTP request streaming cannot be used in conjunction with HTTP authentication. Either disable request streaming or specify anonymous HTTP authentication."
I have found a description stating that:
Description:
You can't do transport auth. with streaming. If you have to use HTTP request streaming, you'll have to run without security.
So i wish to know how can i secure my service? Which secuirty mode can i use with basichttpbinding?Can anyone pls help me on this?
You can try using TransportWithMessageCredential:
<bindings>
<basicHttpBinding>
<binding name="securedStream" transferMode="streamed">
<security mode="TransportWithMessageCredential">
<message clientCredentialType="UserName" />
</security>
</binding>
</basicHttpBinding>
</bindings>
This will pass credentials in SOAP header. Now you must either pass user's name and password - default validation is against Windows accounts but you can also use Membership provider or custom password validator.
If you really want NTLM or Windows then it means you are running both client and server in the same network / domain. In such case use Net.tcp instead.
I've got a small WCF webservice working with the built-in WCF Service Host and with hosting by the Visual Studio 2008 built-in development webserver.
I these hosting enviroments I have relied on the WCF Test Client for invoking the service methods.
Now I am running into problems with my next phase of testing:
I have it hosted in IIS 5.1 on my WinXP dev machine and I think maybe the problem is I cannot continue to use WCF Test Client anymore. Here is what's happening:
Case 1: "Anonymous Access" is CHECKED (ENABLED)
WCF Test Client UI comes up properly, exposing the WebMethods and the INVOKE button.
Yet when I click INVOKE it fails to connect with a backend data store (a 3rd party product) that requires Windows authentication. I could post the error I get back from the product.DLL but I don't think it is relevant.
Case 2: "Anonymous Access" is un-CHECKED (DISABLED)
WCF Test Client UI fails to even initialize properly. My researching of this tells me that MEX (WS-Metadata Exchange) requires "Anonymous Access" and (apparently) WCF Test Client requires MEX. Here are key snippets of the error being returned:
Error: Cannot obtain Metadata from http://localhost/wcfiishost
The remote server returned an error: (401) Unauthorized.HTTP GET Error
URI: http://localhost/wcfiishost
There was an error downloading 'http://localhost/wcfiishost'.
The request failed with the error message:
Security settings for this service require 'Anonymous' Authentication but it is not enabled for the IIS application that hosts this service
The are lots of explanations of binding options, message security, etc. and stuff I honestly do not understand. Here is my take on where I am but I would love your opinions:
(a) Because I know my WCF webservice MUST be configured to use Windows Authentication, I conclude I cannot continue to use the WCF Test Client when hosting my service in IIS. That it has effectively outlived it's usefulness to me. I will just have to take the time to write a web client because WCFTestClient won't work without Anonymous.
(or)
(b) It is possible to use WCF Test Client if it and the hosted service are configured propertly (I just don't know what the special configuration techniques are for this).
Which is correct? Time to stop using WCFTestClient or is there a way to have it both ways? Thanks in advance for your advice.
EDIT: 11 June 09
Is there anything else I can provide to help someone else help me on this question?
I just tried to have the same setup - but in my case, everything seems to work just fine.
ASP.NET web site
WCF service, using basicHttpBinding without any special settings at all
IIS Application with anonymous = enabled and Windows authentication = enabled (both turned on)
I can easily connect to it with the WcfTestClient and retrieve the metadata, and I can then call it, no problem.
Inside my service function, I check to see whether the current user is a known user or not, it is correctly identified as a Windows authenticated user:
ServiceSecurityContext ssc = ServiceSecurityContext.Current;
if (ssc.IsAnonymous)
{
return "anonymous user";
}
else
{
if(ssc.WindowsIdentity != null)
{
return ssc.WindowsIdentity.Name;
}
if (ssc.PrimaryIdentity != null)
{
return ssc.PrimaryIdentity.Name;
}
}
return "(no known user)";
I don't really know, what more to check for (except I'm on Vista with IIS7). Any chance you could include this code to check for the user in your service code? Just to see....
Marc
Marc, your setup is not even close to Johns.
John uses WSHttpBinding that uses Windows Credentials for Message mode transport. The Windows Authentication isn't being used with BasicHttpBinding. Furthermore, John had AnonymousAuthentication disabled, which is why the Metadata Exchange (mex) is failing.
The call won't even reach inside the service side function, because we get a Error 401 (Unauthorized) when we try to call.
Just know John, I have the same issue, and I'm trying to somehow set up separate bindings per endpoint. Hopefully that will work.
When I set the title/subject of this question and reached a dead end here, I opened up the same issue in the MSDN forum with a different emphasis on the title (content of question essentially the same).
For me, the real issue was how to use WCFTestClient in IIS without Anonymous Authentication being set (because my service needed Integrated Windows Authentication only).
Mex apparently requires Anonymous and by default WCFTestClient seems to need Mex. The key seems to be accomodating both my doctoring up the web.config file carefully.
Anyway, I got it working with this web.config below (the MSDN link is here:
<?xml version="1.0"?>
<configuration>
<endpoint address=""
binding="wsHttpBinding"
bindingConfiguration="wsBindingConfig"
contract="sdkTrimFileServiceWCF.IFileService">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
<endpoint address="basic"
binding="basicHttpBinding"
bindingConfiguration="bindingConfig"
contract="sdkTrimFileServiceWCF.IFileService" />
</service>
</services>
<bindings>
<basicHttpBinding>
<binding name="bindingConfig">
<security mode="TransportCredentialOnly">
<transport clientCredentialType="Windows"/>
</security>
</binding>
</basicHttpBinding>
<wsHttpBinding>
<binding name="wsBindingConfig">
<security mode="Transport">
<transport clientCredentialType="Windows"/>
</security>
</binding>
</wsHttpBinding>
</bindings>
</serviceBehaviors>
</behaviors>