Related
In an extract I am dealing with, I have 2 datetime columns. One column stores the dates and another the times as shown.
How can I query the table to combine these two fields into 1 column of type datetime?
Dates
2009-03-12 00:00:00.000
2009-03-26 00:00:00.000
2009-03-26 00:00:00.000
Times
1899-12-30 12:30:00.000
1899-12-30 10:00:00.000
1899-12-30 10:00:00.000
You can simply add the two.
if the Time part of your Date column is always zero
and the Date part of your Time column is also always zero (base date: January 1, 1900)
Adding them returns the correct result.
SELECT Combined = MyDate + MyTime FROM MyTable
Rationale (kudos to ErikE/dnolan)
It works like this due to the way the date is stored as two 4-byte
Integers with the left 4-bytes being the date and the right
4-bytes being the time. Its like doing $0001 0000 + $0000 0001 =
$0001 0001
Edit regarding new SQL Server 2008 types
Date and Time are types introduced in SQL Server 2008. If you insist on adding, you can use Combined = CAST(MyDate AS DATETIME) + CAST(MyTime AS DATETIME)
Edit2 regarding loss of precision in SQL Server 2008 and up (kudos to Martin Smith)
Have a look at How to combine date and time to datetime2 in SQL Server? to prevent loss of precision using SQL Server 2008 and up.
If the time element of your date column and the date element of your time column are both zero then Lieven's answer is what you need. If you can't guarantee that will always be the case then it becomes slightly more complicated:
SELECT DATEADD(day, 0, DATEDIFF(day, 0, your_date_column)) +
DATEADD(day, 0 - DATEDIFF(day, 0, your_time_column), your_time_column)
FROM your_table
This is an alternative solution without any char conversions:
DATEADD(ms, DATEDIFF(ms, '00:00:00', [Time]), CONVERT(DATETIME, [Date]))
You will only get milliseconds accuracy this way, but that would normally be OK. I have tested this in SQL Server 2008.
This worked for me
CAST(Tbl.date as DATETIME) + CAST(Tbl.TimeFrom AS TIME)
(on SQL 2008 R2)
If you're not using SQL Server 2008 (i.e. you only have a DateTime data type), you can use the following (admittedly rough and ready) TSQL to achieve what you want:
DECLARE #DateOnly AS datetime
DECLARE #TimeOnly AS datetime
SET #DateOnly = '07 aug 2009 00:00:00'
SET #TimeOnly = '01 jan 1899 10:11:23'
-- Gives Date Only.
SELECT DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly))
-- Gives Time Only.
SELECT DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
-- Concatenates Date and Time parts.
SELECT
CAST(
DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly)) + ' ' +
DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
as datetime)
It's rough and ready, but it works!
If both of your fields are datetime then simply adding those will work.
eg:
Declare #d datetime, #t datetime
set #d = '2009-03-12 00:00:00.000';
set #t = '1899-12-30 12:30:00.000';
select #d + #t
If you used Date & Time datatype then just cast the time to datetime
eg:
Declare #d date, #t time
set #d = '2009-03-12';
set #t = '12:30:00.000';
select #d + cast(#t as datetime)
This was my solution which ignores the date value of the time column
CAST(Tbl.date as DATETIME) + CAST(CAST(Tbl.TimeFrom AS TIME) as DATETIME)
Hope this helps others
Convert the first date stored in a datetime field to a string, then convert the time stored in a datetime field to string, append the two and convert back to a datetime field all using known conversion formats.
Convert(datetime, Convert(char(10), MYDATETIMEFIELD, 103) + ' ' + Convert(char(8), MYTIMEFIELD, 108), 103)
Convert both field into DATETIME :
SELECT CAST(#DateField as DATETIME) + CAST(#TimeField AS DATETIME)
and if you're using Getdate() use this first:
DECLARE #FechaActual DATETIME = CONVERT(DATE, GETDATE());
SELECT CAST(#FechaActual as DATETIME) + CAST(#HoraInicioTurno AS DATETIME)
I had many errors as stated above so I did it like this
try_parse(concat(convert(date,Arrival_date),' ',arrival_time) as datetime) AS ArrivalDateTime
It worked for me.
Finding this works for two dates where you want time from one and date from the other:
declare #Time as datetime = '2021-11-19 12:34'
declare #Date as datetime = '2021-10-10'
SELECT #time + datediff(day, #Time, #Date)
DECLARE #Dates table ([Date] datetime);
DECLARE #Times table ([Time] datetime);
INSERT INTO #Dates VALUES('2009-03-12 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-26 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-30 00:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 12:30:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
WITH Dates (ID, [Date])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Date]), [Date] FROM #Dates
), Times (ID, [Time])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Time]), [Time] FROM #Times
)
SELECT Dates.[Date] + Times.[Time] FROM Dates
JOIN Times ON Times.ID = Dates.ID
Prints:
2009-03-12 10:00:00.000
2009-03-26 10:00:00.000
2009-03-30 12:30:00.000
To combine date from a datetime column and time from another datetime column this is the best fastest solution for you:
select cast(cast(DateColumn as date) as datetime) + cast(TimeColumn as datetime) from YourTable
SELECT CAST(CAST(#DateField As Date) As DateTime) + CAST(CAST(#TimeField As Time) As DateTime)
Another way is to use CONCATand CAST, be aware, that you need to use DATETIME2(x) to make it work. You can set x to anything between 0-7 7 meaning no precision loss.
DECLARE #date date = '2018-03-12'
DECLARE #time time = '07:00:00.0000000'
SELECT CAST(CONCAT(#date, ' ', #time) AS DATETIME2(7))
Returns 2018-03-12 07:00:00.0000000
Tested on SQL Server 14
simply concatenate both , but cast them first as below
select cast(concat(Cast(DateField as varchar), ' ', Cast(TimeField as varchar)) as datetime) as DateWithTime from TableName;
select s.SalesID from SalesTbl s
where cast(cast(s.SaleDate as date) as datetime) + cast(cast(s.SaleCreatedDate as time) as datetime) between #FromDate and #ToDate
The existing answers do not address the datetime2 datatype so I will add mine:
Assuming that you want to add a time value to a datetime2 value where:
The datetime2 value could contain non-zero time component and/or fractional seconds
The time value could contain the value 23:59:59.9999999 which is 86,399.9999999 seconds, 86,399,999,999.9 microseconds or 86,399,999,999,900 nanoseconds¹
Due to the limitations of dateadd function¹ you must add them in two steps:
Convert the time value to seconds and use dateadd(second, ...)
Extract the nanoseconds from the time value and use dateadd(nanosecond, ...) to add them to the date calculated above
declare #dv datetime2 = '2000-01-01 12:34:56.7890123';
declare #tv time = '23:59:59.9999999';
select dateadd(
nanosecond,
datepart(nanosecond, #tv),
dateadd(
second,
datepart(hour, #tv) * 60 * 60 + datepart(minute, #tv) * 60 + datepart(second, #tv),
#dv
)
);
-- 2000-01-02 12:34:56.7890122
¹ Nanosecond values might not fit in int datatype which dateadd function expects.
SELECT CAST(your_date_column AS date) + CAST(your_time_column AS datetime) FROM your_table
Works like a charm
I ran into similar situation where I had to merge Date and Time fields to DateTime field. None of the above mentioned solution work, specially adding two fields as the data type for addition of these 2 fields is not same.
I created below solution, where I added hour and then minute part to the date. This worked beautifully for me. Please check it out and do let me know if you get into any issues.
;with tbl
as
(
select StatusTime = '12/30/1899 5:17:00 PM', StatusDate = '7/24/2019 12:00:00 AM'
)
select DATEADD(MI, DATEPART(MINUTE,CAST(tbl.StatusTime AS TIME)),DATEADD(HH, DATEPART(HOUR,CAST(tbl.StatusTime AS TIME)), CAST(tbl.StatusDate as DATETIME)))
from tbl
Result: 2019-07-24 17:17:00.000
Here is what I have tried thus far:
select CAST(
DATEPART(month,getDate())+'-'+
DATEPART(day,getDate())+'-'+
2012
as datetime)
I end up with the date: 1905-08-02 00:00:00.0. I was expecting to get today's date. I have rearranged the order and it doesn't seem to change. Can anyone offer as to why it gives me this? For the record, I plan to use other values than 2012 for the year.
Thanks in advance.
CAST() each piece as a varchar first:
select
cast(
cast(DATEPART(month,getDate()) as varchar(2))+'-'+
cast(DATEPART(day,getDate()) as varchar(2))+'-'+
'2012' as datetime)
select CAST ('2012'+
CAST(DATEPART(month,getDate()) as char(2))+
CAST(DATEPART(day,getDate()) as char(2))
as datetime)
You have to concatenate strings. Your code is casting the number 2039 to date.
If the goal with this little exercise is to be able to change the year of a given date you can do like this instead.
declare #NewYear int = 2003
-- with time part
select dateadd(year, #NewYear - year(getdate()), getdate())
-- time part removed
select dateadd(year, #NewYear - year(getdate()), dateadd(day, 0, datediff(day, 0, getdate())))
This code will work, you need to make sure that you are concatenating same data types and use convert with specific DateTime Format:
SELECT CONVERT(DATETIME,
CAST(DATEPART(month,getDate()) AS NVARCHAR(50))
+'-'+CAST(DATEPART(day,getDate()) AS NVARCHAR(50))
+'-2012'
,121)
When I select date in SQL it is returned as 2011-02-25 21:17:33.933. But I need only the Date part, that is 2011-02-25. How can I do this?
For SQL Server 2008:
Convert(date, getdate())
Please refer to https://learn.microsoft.com/en-us/sql/t-sql/functions/getdate-transact-sql
I guess he wants a string.
select convert(varchar(10), '2011-02-25 21:17:33.933', 120)
120 here tells the convert function that we pass the input date in the following format: yyyy-mm-dd hh:mi:ss.
Using CAST(GETDATE() As Date) worked for me
The fastest is datediff, e.g.
select dateadd(d, datediff(d,0, [datecolumn]), 0), other..
from tbl
But if you only need to use the value, then you can skip the dateadd, e.g.
select ...
WHERE somedate <= datediff(d, 0, getdate())
where the expression datediff(d, 0, getdate()) is sufficient to return today's date without time portion.
CAST(
FLOOR(
CAST( GETDATE() AS FLOAT )
)
AS DATETIME
)
http://www.bennadel.com/blog/122-Getting-Only-the-Date-Part-of-a-Date-Time-Stamp-in-SQL-Server.htm
For 2008 older version :
SELECT DATEADD(DAY, DATEDIFF(DAY, 0, GETDATE()), 0)
you can use like this
SELECT Convert(varchar(10), GETDATE(),120)
In case if you need the time to be zeros like 2018-01-17 00:00:00.000:
SELECT CONVERT(DATETIME, CONVERT(DATE, GETDATE()), 121)
I would use DATEFROMPARTS function. It is quite easy and you don't need casting. As an example this query :
Select DATEFROMPARTS(YEAR(GETDATE()), MONTH(GETDATE()), DAY(GETDATE())) as myNewDate
will return
2021-01-21
The good part you can also create you own date, for example you want first day of a month as a date, than you can just use like below:
Select DATEFROMPARTS(YEAR(GETDATE()), MONTH(GETDATE()), 1) as myNewDate
The result will be:
2021-01-01
You can try this one too.
SELECT CONVERT(DATE, GETDATE(), 120)
Its too late but following worked for me well
declare #vCurrentDate date=getutcdate()
select #vCurrentDate
When data type is date, hours would be truncated
It's a bit late, but use the ODBC "curdate" function (angle brackes 'fn' is the ODBC function escape sequence).
SELECT {fn curdate()}
Output: 2013-02-01
Convert it back to datetime after converting to date in order to keep same datatime if needed
select Convert(datetime, Convert(date, getdate()) )
If you want to return a date type as just a date use
CONVERT(date, SYSDATETIME())
or
SELECT CONVERT(date,SYSDATETIME())
or
DECLARE #DateOnly Datetime
SET #DateOnly=CONVERT(date,SYSDATETIME())
Use is simple:
convert(date, Btch_Time)
Example below:
Table:
Efft_d Loan_I Loan_Purp_Type_C Orig_LTV Curr_LTV Schd_LTV Un_drwn_Bal_a Btch_Time Strm_I Btch_Ins_I
2014-05-31 200312500 HL03 NULL 1.0000 1.0000 1.0000 2014-06-17 11:10:57.330 1005 24851e0a-53983699-14b4-69109
Select * from helios.dbo.CBA_SRD_Loan where Loan_I in ('200312500') and convert(date, Btch_Time) = '2014-06-17'
select DATE(field) from table;
field value: 2020-12-15 12:19:00
select value: 2020-12-15
In PLSQL you can use
to_char(SYSDATE,'dd/mm/yyyy')
First Convert the date to float (which displays the numeric), then ROUND the numeric to 0 decimal points, then convert that to datetime.
convert(datetime,round(convert(float,orderdate,101),0) ,101)
Try this.
SELECT DATEADD(DD, 0, DATEDIFF(DD, 0, GETDATE()))
I would create a scalar function and use format () to set the datatype you want to see. It is must easy on the maintenance later.
Personal favorite:
select convert(datetime, convert(int, getdate()))
How do I convert hh:mm:ss to hh:mm in SQL Server?
select Count(Page) as VisitingCount,Page,CONVERT(VARCHAR(8),Date, 108) from scr_SecuristLog
where Date between '2009-05-04 00:00:00' and '2009-05-06 14:58'
and [user] in(select USERNAME
from scr_CustomerAuthorities )
group by Page,Date order by [VisitingCount] asc
CONVERT(VARCHAR(5),Date, 108)-- Gets only HH:mm
In general, the set of timestamps is not well-ordered, this means you cannot get a "last" timestamp whose time part up to minutes is 2009-05-06 14:58.
In SQL Server, which keeps the time part of a datetime as a number of 1/300 second fractions after midnight, this "last" timestamp would be 2009-05-06 14:58:59.997, but this is not guaranteed to be compatible with future releases of with other TIMESTAMP storage methods.
That means you'll need to split your BETWEEN condition into two conditions, one of which being strict less than the next minute:
select Count(Page) as VisitingCount,Page,CONVERT(VARCHAR(8),Date, 108) from scr_SecuristLog
where Date >= '2009-05-04 00:00:00'
AND Date < DATEADD(minute, 1, '2009-05-06 14:58')
and [user] in(select USERNAME
from scr_CustomerAuthorities )
group by Page,Date order by [VisitingCount] asc
This solution will efficiently use indexes on Date
SELECT Convert(varchar(5), GetDate(), 108)
Using varchar(5) will automatically truncate the date to remove the seconds.
I dont think there is a built in function; usually do something like this
SET #time = '07:45'
SET #date = CONVERT(DATETIME,#time)
SELECT #date
SELECT LEFT(CONVERT(VARCHAR,#date,108),5)
For this specific need you should use the between method as noted by Quassnoi's answer. However, the general problem can be solved with:
select dateadd(second, -datepart(second, #date), #date)
One way would be to use the RIGHT() function to crop the Date. Something like:
RIGHT(CONVERT(VARCHAR(8),Date, 108),5)
This will only work if number of characters is constant e.g. there is a leading zero if applicable. (Sorry havn't got SQL server here to test).
A better way is to use the T-SQL datepart function to split and then re-concatinate the date parts so:
DARTPART("hh", CONVERT(VARCHAR(8),Date, 108))+":"+DARTPART("mi", CONVERT(VARCHAR(8),Date, 108))
References:
http://msdn.microsoft.com/en-us/library/ms174420.aspx
http://msdn.microsoft.com/en-us/library/ms187928.aspx
http://msdn.microsoft.com/en-us/library/ms177532.aspx
To get hh:mm format from today's date:
select getdate()
select convert(varchar(5),getdate(),108)
To get hh:mm format from any datetime column in a table data:
select date_time_column_name from table_name where column_name = 'any column data name'
select convert(varchar(5),date_time_column_name,108) from table_name
where column_name = 'any column data name'
select creationdate from employee where Name = 'Satya'
select convert(varchar(5),creationdate,108) from employee
where Name = 'Satya'
SELECT CAST(CAST(GETDATE() AS Time(0)) AS VARCHAR(5))
In an extract I am dealing with, I have 2 datetime columns. One column stores the dates and another the times as shown.
How can I query the table to combine these two fields into 1 column of type datetime?
Dates
2009-03-12 00:00:00.000
2009-03-26 00:00:00.000
2009-03-26 00:00:00.000
Times
1899-12-30 12:30:00.000
1899-12-30 10:00:00.000
1899-12-30 10:00:00.000
You can simply add the two.
if the Time part of your Date column is always zero
and the Date part of your Time column is also always zero (base date: January 1, 1900)
Adding them returns the correct result.
SELECT Combined = MyDate + MyTime FROM MyTable
Rationale (kudos to ErikE/dnolan)
It works like this due to the way the date is stored as two 4-byte
Integers with the left 4-bytes being the date and the right
4-bytes being the time. Its like doing $0001 0000 + $0000 0001 =
$0001 0001
Edit regarding new SQL Server 2008 types
Date and Time are types introduced in SQL Server 2008. If you insist on adding, you can use Combined = CAST(MyDate AS DATETIME) + CAST(MyTime AS DATETIME)
Edit2 regarding loss of precision in SQL Server 2008 and up (kudos to Martin Smith)
Have a look at How to combine date and time to datetime2 in SQL Server? to prevent loss of precision using SQL Server 2008 and up.
If the time element of your date column and the date element of your time column are both zero then Lieven's answer is what you need. If you can't guarantee that will always be the case then it becomes slightly more complicated:
SELECT DATEADD(day, 0, DATEDIFF(day, 0, your_date_column)) +
DATEADD(day, 0 - DATEDIFF(day, 0, your_time_column), your_time_column)
FROM your_table
This is an alternative solution without any char conversions:
DATEADD(ms, DATEDIFF(ms, '00:00:00', [Time]), CONVERT(DATETIME, [Date]))
You will only get milliseconds accuracy this way, but that would normally be OK. I have tested this in SQL Server 2008.
This worked for me
CAST(Tbl.date as DATETIME) + CAST(Tbl.TimeFrom AS TIME)
(on SQL 2008 R2)
If you're not using SQL Server 2008 (i.e. you only have a DateTime data type), you can use the following (admittedly rough and ready) TSQL to achieve what you want:
DECLARE #DateOnly AS datetime
DECLARE #TimeOnly AS datetime
SET #DateOnly = '07 aug 2009 00:00:00'
SET #TimeOnly = '01 jan 1899 10:11:23'
-- Gives Date Only.
SELECT DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly))
-- Gives Time Only.
SELECT DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
-- Concatenates Date and Time parts.
SELECT
CAST(
DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly)) + ' ' +
DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
as datetime)
It's rough and ready, but it works!
If both of your fields are datetime then simply adding those will work.
eg:
Declare #d datetime, #t datetime
set #d = '2009-03-12 00:00:00.000';
set #t = '1899-12-30 12:30:00.000';
select #d + #t
If you used Date & Time datatype then just cast the time to datetime
eg:
Declare #d date, #t time
set #d = '2009-03-12';
set #t = '12:30:00.000';
select #d + cast(#t as datetime)
This was my solution which ignores the date value of the time column
CAST(Tbl.date as DATETIME) + CAST(CAST(Tbl.TimeFrom AS TIME) as DATETIME)
Hope this helps others
Convert the first date stored in a datetime field to a string, then convert the time stored in a datetime field to string, append the two and convert back to a datetime field all using known conversion formats.
Convert(datetime, Convert(char(10), MYDATETIMEFIELD, 103) + ' ' + Convert(char(8), MYTIMEFIELD, 108), 103)
Convert both field into DATETIME :
SELECT CAST(#DateField as DATETIME) + CAST(#TimeField AS DATETIME)
and if you're using Getdate() use this first:
DECLARE #FechaActual DATETIME = CONVERT(DATE, GETDATE());
SELECT CAST(#FechaActual as DATETIME) + CAST(#HoraInicioTurno AS DATETIME)
I had many errors as stated above so I did it like this
try_parse(concat(convert(date,Arrival_date),' ',arrival_time) as datetime) AS ArrivalDateTime
It worked for me.
Finding this works for two dates where you want time from one and date from the other:
declare #Time as datetime = '2021-11-19 12:34'
declare #Date as datetime = '2021-10-10'
SELECT #time + datediff(day, #Time, #Date)
DECLARE #Dates table ([Date] datetime);
DECLARE #Times table ([Time] datetime);
INSERT INTO #Dates VALUES('2009-03-12 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-26 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-30 00:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 12:30:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
WITH Dates (ID, [Date])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Date]), [Date] FROM #Dates
), Times (ID, [Time])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Time]), [Time] FROM #Times
)
SELECT Dates.[Date] + Times.[Time] FROM Dates
JOIN Times ON Times.ID = Dates.ID
Prints:
2009-03-12 10:00:00.000
2009-03-26 10:00:00.000
2009-03-30 12:30:00.000
To combine date from a datetime column and time from another datetime column this is the best fastest solution for you:
select cast(cast(DateColumn as date) as datetime) + cast(TimeColumn as datetime) from YourTable
SELECT CAST(CAST(#DateField As Date) As DateTime) + CAST(CAST(#TimeField As Time) As DateTime)
Another way is to use CONCATand CAST, be aware, that you need to use DATETIME2(x) to make it work. You can set x to anything between 0-7 7 meaning no precision loss.
DECLARE #date date = '2018-03-12'
DECLARE #time time = '07:00:00.0000000'
SELECT CAST(CONCAT(#date, ' ', #time) AS DATETIME2(7))
Returns 2018-03-12 07:00:00.0000000
Tested on SQL Server 14
simply concatenate both , but cast them first as below
select cast(concat(Cast(DateField as varchar), ' ', Cast(TimeField as varchar)) as datetime) as DateWithTime from TableName;
select s.SalesID from SalesTbl s
where cast(cast(s.SaleDate as date) as datetime) + cast(cast(s.SaleCreatedDate as time) as datetime) between #FromDate and #ToDate
The existing answers do not address the datetime2 datatype so I will add mine:
Assuming that you want to add a time value to a datetime2 value where:
The datetime2 value could contain non-zero time component and/or fractional seconds
The time value could contain the value 23:59:59.9999999 which is 86,399.9999999 seconds, 86,399,999,999.9 microseconds or 86,399,999,999,900 nanoseconds¹
Due to the limitations of dateadd function¹ you must add them in two steps:
Convert the time value to seconds and use dateadd(second, ...)
Extract the nanoseconds from the time value and use dateadd(nanosecond, ...) to add them to the date calculated above
declare #dv datetime2 = '2000-01-01 12:34:56.7890123';
declare #tv time = '23:59:59.9999999';
select dateadd(
nanosecond,
datepart(nanosecond, #tv),
dateadd(
second,
datepart(hour, #tv) * 60 * 60 + datepart(minute, #tv) * 60 + datepart(second, #tv),
#dv
)
);
-- 2000-01-02 12:34:56.7890122
¹ Nanosecond values might not fit in int datatype which dateadd function expects.
SELECT CAST(your_date_column AS date) + CAST(your_time_column AS datetime) FROM your_table
Works like a charm
I ran into similar situation where I had to merge Date and Time fields to DateTime field. None of the above mentioned solution work, specially adding two fields as the data type for addition of these 2 fields is not same.
I created below solution, where I added hour and then minute part to the date. This worked beautifully for me. Please check it out and do let me know if you get into any issues.
;with tbl
as
(
select StatusTime = '12/30/1899 5:17:00 PM', StatusDate = '7/24/2019 12:00:00 AM'
)
select DATEADD(MI, DATEPART(MINUTE,CAST(tbl.StatusTime AS TIME)),DATEADD(HH, DATEPART(HOUR,CAST(tbl.StatusTime AS TIME)), CAST(tbl.StatusDate as DATETIME)))
from tbl
Result: 2019-07-24 17:17:00.000