I'm writing a Linux application that accesses a LDAP server (currently OpenLDAP).
I would like to also test the application with an Active Directory server since that might be used in production.
Is there any free demo or trial version from Microsoft that would allow me to run this test in a VM ?
Yes, you can download a evaluation copy of Windows Server 2008 R2. You have 180 days to do your evaluation. After you successfully install the Windows Server 2008 R2, you just click Windows button and type in "dcpromo". It will launch a wizard and guide you setting up the domain controller (i.e. the LDAP server + KDC)
Related
I've installed SQL Server 2016 (Standard Edition) on a Windows Server 2016, selecting Integration Services to be installed too. I've also installed SSMS and SSDT from the same installation media.
I am running SSMS as administrator and can connect to the local Database engine.
My user is a Windows and SQL Server admin.
However I cannot connect (explicitly using the server name) or even browse to the local Integration Services?
Receiving the following error.
SSIS not browsable and can't connect
Having already searched for an answer to this problem, many suggest checking that the service is running etc. which can be seen in the Services and SQL Configuration Manager.
Services shown as running
I've also tried turning off the Windows Firewall to establish if that is the cause of the problem but it had no effect.
Anyone got any ideas what might be preventing it from being accessible?
I've had this problem last month. In my case I had to install the 32-bit version of access database engine (on my 64 bit windows).
Sql data tools works with 32-bit
https://www.microsoft.com/en-us/download/details.aspx?id=54920
The later SSMS versions (16.x and 17.x) will only connect to their respective versions SQL 2016 and SQL 2017. Microsoft is planning to retire the older method in favor of the SSISDB, which is more secure.
Link to the official statement from Microsoft (in the note box).
I have had the same problem and the solution was to install the old interface on top of the existing one (SQL Server Management Studio 2016). Here's link to the installation file. After having installed this, I can now connect to the integration services. You will have to set it up of course and give yourself Rights
I have developed a application in c# which is windows based application. It stores data into database sql server. I want to know, when I create setup in VS and install it in a client computer should I install sql server software also or Is there any way without installing SQL Server in client's PC My application can function correctly.
sIf you use a filebased implementaion of SQL (localDB) you should be able to get away with a "setup" installing the neccecary dependencies to bootstrap the DB. (Someone correct me?)
If you use the DB in a hosted SQL environment (SQL Server running as a service), you will need to install SQL server on the deployed pc, and get the database up.
I am no sure if you can "automate" installing SQL server and getting the DB up from a setup app.
You have two deployment options for applications that contain SQL Server Compact 3.5 databases. The method of deployment you choose depends on the servicing requirements of your application and whether your users will need administrative credentials on the computer on which the application will be installed.
Following are the deployment options for SQL Server Compact 3.5 databases:
1. Traditional Microsoft Windows Installer (Microsoft setup technology)
a. Users need administrative credentials to install the application.
b. SQL Server Compact 3.5 will be serviced by Microsoft Update.
c. Can use ClickOnce deployment.
-or-
Private file–based deployment (deploying the SQL Server Compact 3.5 DLLs as part of the project)
1. Users do not need administrative credentials to install the application.
2. SQL Server Compact 3.5 will not be serviced by Microsoft Update.
3. Can also use ClickOnce deployment.
I want to deploy an MVC 4 web application to a Windows Web Server 2008 based dedicated hosting. I am using SQL Server 2008 R2 Express as my back-end database. What steps will I need to take regarding the following:
Installing SQL Server 2008 R2 Express on the web server and deploying my database.
Managing SQL Express database remotely using SSMS.
Configuring database path in my EF5 generated model
Deploying my application
Managing changes to my application.
Can someone provide me a detailed answer/some good links?
Installing SQL Server 2008 R2 Express on the web server and deploying my database.
This depends on your provider. Most providers, if not all, allow you to install your own licensed SQL Server. If you will be using an Express edition then it is, and should be, 100% allowable by your provider. The only step you need here is to go to download page of SQL Server 2008 R2 and download the appropriate file you need. The files you need on that page are the ones with "ADV" in its name. Choose x64 if you will install a 64-bit OS or choose x86 if you will install a 32-bit OS.
Managing SQL Express database remotely using SSMS.
This depends on the firewall set by your provider. But basically this is how you will allow remote access to your SQL Server:
For Windows 2008 R2
Login to your dedicated server using Remote Desktop. If you don't know how to do this, it's best that you consult with your provider.
Go to Start > All Programs > Microsoft SQL Server 2008 R2 > Configuration Tools -> SQL Server Configuration Manager
On the window that open in step #2, expand SQL Server Configuration Manager (Local) -> SQL Server Network Configuration -> Protocols for SQLExpress
On the right pane, right-click TCP/IP and select Properties.
Select the IP Addresses tab and then scroll to the IP All section.
Set/change the TCP Port value to/from 1433 to 14333 (or any other port) and then click OK.
Right-click TCP/IP again and Enable it
Restart your SQL Server by going to Start -> All Programs -> Administrative Tools -> Services -> SQL Server (SQLEXPRESS) -> Restart. The Restart is on the left pane.
Configuring database path in my EF5 generated model
Unfortunately, I cannot answer this one as I believe you are using the EF designer in creating your model. I never worked with EF that way, but only by code-first. I have to skip this part and let you Google this.
Deploying my application
There is already a good documentation written here so I will not dupliate it here. Basically what you need to do is enable FTP on your dedicated server. Then once that is setup you can go on with bin-deploying your application.
Managing changes to my application.
I assume what you are asking here is that if you have changes to your application, how would you re-deploy it. A bin-deployment will not hurt. Deploying only the files in which you have changes is a good approach. Knowing which files changed can vary depending on the tools you use. In addition, if you don't have any fancy setup that will tell your users you are deploying changes to your site, you might want to take a look at this post. It tells you to put a App_Offline.htm file in your root web directory. That should still work with MVC, after all MVC is still ASP.Net.
I have a Windows Server 2008 Enterprise installation on a server and I cannot remember the local user-accounts or passwords, so I'm unable to log in to the server. (This server was not been used for a while). Is there anyway that I can list the local user-account names without logging in?
You could use tools like ERD Commander, however I'm not sure whether it works with W2K8
I've just built a new dev machine and I can't get SQL Server Agent working. What I've done so far:
Install VS 2010 (I think this installed an express version of SQL Server)
Install SQL Server 2008 R2 Developer edition.
I'm not sure if I did something wrong in step 2. All I want is a fully working version of SQL Server with SQL Server Agent running and no limitation on the amount of data I can store (I will need more than 10GB).
Currently, in SSMS I have the following instance: ./SQLEXPRESS. I thought that during step 2, this would have been upgraded, but it doesn't seem so.
Can anyone help?
Note: I ended up resolving this by uninstalling everything that had "SQL Server" in it in Control Panel > Programs and Features. I then reinstalled from scratch.
Note: I ended up resolving this by uninstalling everything that had "SQL Server" in it in Control Panel > Programs and Features. I then reinstalled from scratch.
The agent account is disabled. If you aren't able to enable it through configuration manager, try enabling it through services. After its enabled, try starting the serivce. If you still have issues starting the agent, try changing the account the service is running under. There may also be an issue with the account that the SQL Server service is running under. Trying changing the SQL Server service account and restarting it. The agent should then start up successfully.
You have two installations, with two named instances. The Express named SQLEXPRESS and the developer edition named MSSQLSERVER (unless you changed this during install). connect to .\MSSQLSERVER and see, it should be there available to be started.
SQL Server Express does not ship with the SQL Server Agent.