I have been trying to download the source distributions for activeMQ now for over a week and all I get is a server not found page. I have emailed apache and have gotten no responses. At one point the mirrors site was taking me to a celebrity gossip website. I can get the binary distribution but I need the source code. This is the link I have been trying
http://www.apache.org/dyn/closer.cgi?path=%2Factivemq%2Fapache-activemq%2F5.4.0%2Factivemq-parent-5.4.0-source-release.tar.gz
Does anyone know what is going on with this?
thanks,
Rebeka
You can get it from:
http://www.apache.org/dist//activemq/apache-activemq/5.4.0/
Until the broken links are resolved you can always get it from svn:
https://svn.apache.org/repos/asf/activemq/tags/activemq-5.4.0/
You can find active MQ core source code here:
http://grepcode.com/project/repo1.maven.org/maven2/org.apache.activemq/activemq-core/
Grab the latest release, just follow the download link from their page.
e.g. here
Related
I am trying to find some guidance on where to go next on the issue I am having migrating a phpbb3 site from one hosting service to another.
I have checked to make sure the config.php file has been changed to work on the new server, as well as the common.php file. I am getting a HTTP 500 error when I try to search for the forum. The main site is working normally, just the message board is having a problem.
Nothing about the structure of the sites pages has changed, only the hosting server. (I downloaded a copy of the website before moving it so I have everything in the exact way it was before, just on the new server.)
Do I need to install phpbb onto the server itself with Softaculous?
Anything would help, I need to get the site back up and running soon.
Thanks in advance.
Jacob
This post would have been better addressed on phpBB.com support section...
In any cases most hosting companies out there will perform the migration for you for free.
Did you ask about handling a migration for you?
There are many things that need to be done when migrating to a new hosting.
here a couple of pointers for you:
-PHP version in use should be PHP 5.6.x as phpBB 3.0.x does not support higher PHP versions
-config.php might need updating, for example these two fields:
$dbhost = '';
$dbport = '';
-check your error logs in your cPanel as they will reveal the cause of the 500 error
Also, NO you do not need Softaculous
I'll be happy to help you with this if you PM me on:
https://www.phpbb.com/community/memberlist.php?mode=viewprofile&u=1428301
-SiteSplat
The php version on the new hosting services server was above what phpBB 3.0.x needed. I upgraded phpBB to version 3.2.9 and the issue was resolved.
I am unable to download Apache Geode, Binary, from all the 3 sites mentioned. Pls help.
http://mirror.fibergrid.in/apache/incubator/geode/1.0.0-incubating.M2/apache-geode-1.0.0-incubating.M2.zip
http://www-us.apache.org/dist/incubator/geode/1.0.0-incubating.M2/apache-geode-1.0.0-incubating.M2.zip
http://www-eu.apache.org/dist/incubator/geode/1.0.0-incubating.M2/apache-geode-1.0.0-incubating.M2.zip
I was able to download from the links you posted, can you try again?
after installing these plugins:
Concatenate Js/Css and
SimpleCache
I get this error in backend:
Error: <!DOCTYPE html>
<html lang="de">
I have this behaviour at two sites. Other sites without these plugins are working.
How can I reach the backend or what have I to do to reach the backend?
Regards
Uwe
turn on safe mode: http://www.impresspages.org/docs/safe-mode/
It turns off all plugins.
You also make plugins inactive by going to the database and altering ip_plugin table records.
Thanks for support. I've got the problem, that I can't reach the backend.
In your doc is written:
Safe mode can be used only by the administrator. Make sure you are logged in to the admin before trying to enter safe mode. - See more at: http://www.impresspages.org/docs/safe-mode/#sthash.1wgnuAaq.dpuf
Well, I can't enter the backend. When I'm typing: www.http://domain.tld/admin I get the error above. Is there a fault on my side?
Is it possible to rename or delete the both plugin-folders via ftp to get than access to the backend?
You also make plugins inactive by going to the database and altering ip_plugin table records. Okay, thank you.
Plugin has been updated. Should work now.
we try to upgrade from archvia 1.3.6 to 2.1.1 but suddenly the remote repositories (including proxy connectors) stopped working. The remote repository view shows error marks in the column "Remote check" but no error message is shown.
Is there a possibility to find out what is going on?
We are using a proxy, we tried with proxy activated, deactivated. I even installed archiva locally on my machine with a fresh database, but still no success.
(how does this remote check even work when the proxy is activated/deactivated in the proxy connectors?)
Eclipse (with newest m2e) says Missing artifact junit:junit:jar:3.8.9. It goes so fast, that i don't think archiva is trying to reach the central-Repository.
The logs on archiva-side are empty.
Does anybody have some hints or the same problem? I think i will try it at home tonight, to see if it is a network issue.
Thanks in advance for any tips!
Update
It really seems that the proxy connector does not work since the internal Repository is empty. http://localhost:8080/archiva/repository/internal/ only shows .indexer
Update 2
The proxy configuration seems bugged in Archiva 2.1.1. I can see the same behaviour as here: Mailing List
A JIRA task for this would be nice.
Does anybody know a workaround to set the proxy for a proxy connector? Or is there a possibility to set a global proxy via a settings file?
Update 3
Rellay seems like a bug in archiva. I sent a mail to the mailing lists. Hopefully this is getting fixed soon because this is a blocker for every user with a proxy.
I won't delete this question for documentation if someone has the same problem. The issue can be found in JIRA here
I also had this problem and the simple solution was to change the proxy protocol from "http" to "https".
I also had the same problem. On first glance the solution given by Christian Quast seemed to work, but it didn't solve the problem. I eventually used a work around by using JVM proxy settings:
-Dhttp.proxyHost=[your_proxy_address]
-Dhttp.proxyPort=[your_proxy_port]
-Dhttp.proxyUser=[your_proxy_user_name]
-Dhttp.proxyPassword=[your_proxy_user_password]
-Dhttp.nonProxyHosts=localhost|127.0.0.1|::0|[any_other_hosts_not_to_use_proxy]
Update
I know it may sound weird but, using the settings above, the error/warning icon on "Remote Check" may still appear. If you add the "network proxy" (mine is using https protocol) to your remote repository (the error/warning icon is still there) but editing the remote repository again and removing it's "network proxy" will show the OK/sun icon.
In my case <networkProxy> under conf\settings.xml gets updated correctly including the port information (probably because my port is not a default 8080) but remote repository connection is still failing.
Also, changing proxy protocol to https did not help.
I know the proxy is right because I use the same for maven .m2\settings.xml
Fortunately I am only evaluating open source repo management tools. Started with Archiva as it is by Apache and we use Maven in our project. Would have moved ahead if this critical issue had a fix or work around. Guess I will have to take a shot at Nexus.
Exactly same problem here. I can't vote on your BUG report because I have no jira account.
As far as I figured out there seems to be a problem with the configuration file ~/.m2/archiva.xml. The Proxy is set without port information.
Hopefully this bug will be fixed as soon as possible.
Extending João Ferreira's reply, to access repositories with https URLs (such as Maven Central), you will also need:
-Dhttps.proxyHost=[your_proxy_host]
-Dhttps.proxyPort=[your_proxy_port]
I installed Subversion on a rootserver running CentOS 6. Took me a while, but now I can access the repository using Chrome. I can add files (svn import at command line level), but only when specifying a file:/// path for the destination, https:// giving me "svn: The project archive was moved permanently to [...]; please relocate". I didn't find a single answer helping me with that particular error / message. So I don't even know what it means, what triggers it, ...
On my client I want to use UEStudio (UltraEdit Studio) which has built-in support for Subversion. When trying to do a checkout in UEStudio using the account I created when installing Subversion on the server it tells me "unable to connect to a repository at URL [...]" and also asks for a password. I saved username and password in UEStudio and can login using the exact same credentials in Chrome. The URL UEStudio isn't able to find a repository at is the same I use to browse my repository in Chrome. I'm puzzled!
So I need help setting up Subversion and UEStudio so they finally work together. I cannot offer more details because I'm not sure which ones are necessary. I already spent a couple of hours trying to solve this so I'm not sure what counts any more.
Please feel free to ask for additional details if needed, I'm happy to help!
This Stackoverflow discussion and pointing UEStudio to the x86-version (used x64 so far) of the Subversion client binaries helped, it works now! Also tried UEStudio again and it works as well!! So the problem was I didn't offer a project at checkout, but the parent directory (the repository itself?), as well as offering the x64 binaries to UEStuido.
Thank you for pointing me in the right direction, Robert!! :)