How to use Fiddler to monitor WCF service - wcf

Question

I have a WCF service that accepts a complex type and returns some data. I want to use Fiddler to see what the incoming requests to the service looks like. The client is .net console app which uses a Service reference proxy. Is this possible with Fiddler. I'm new to this tool and have only used it in the past to post data with the request builder.

Answer 1

You need to add this in your web.config
<system.net>
<defaultProxy>
<proxy bypassonlocal="False" usesystemdefault="True" proxyaddress="http://127.0.0.1:8888" />
</defaultProxy>
</system.net>
then Start Fiddler on the WEBSERVER machine.
Click Tools | Fiddler Options => Connections => adjust the port as 8888.(allow remote if you need that)
Ok, then from file menu, capture the traffic.
That's all, but don't forget to remove the web.config lines after closing the fiddler, because if you don't it will make an error.
Reference : http://fiddler2.com/documentation/Configure-Fiddler/Tasks/UseFiddlerAsReverseProxy

Answer 2

Fiddler listens to outbound requests rather than inbound requests so you're not going to be able to monitor all the requests coming in to your service by using Fiddler.
The best you're going to get with Fiddler is the ability to see all of the requests as they are generated by your Console App (assuming that the app generates web requests rather than using some other pipeline).
If you want a tool that is more powerful (but more difficult to use) that will allow you to monitor ALL incoming requests, you should check out WireShark.
Edit
I stand corrected. Thanks to Eric Law for posting the directions to configuring Fiddler to be a reverse proxy!

Answer 3

Just had this problem, what worked for me was to use localhost.fiddler:
<endpoint address="http://localhost.fiddler/test/test.svc"
binding="basicHttpBinding"
bindingConfiguration="customBinding"
contract="test"
name="customBinding"/>

Answer 4

Consolidating the caveats mentioned in comments/answers for several use cases.
Mostly, see http://docs.telerik.com/fiddler/Configure-Fiddler/Tasks/ConfigureDotNETApp
Start Fiddler before your app
In a console app, you might not need to specify the proxyaddress:
<proxy bypassonlocal="False" usesystemdefault="True" />
In a web application / something hosted in IIS, you need to add the proxyaddress:
<proxy bypassonlocal="False" usesystemdefault="True" proxyaddress="http://127.0.0.1:8888" />
When .NET makes a request (through a service client or HttpWebRequest, etc) it will always bypass the Fiddler proxy for URLs containing localhost, so you must use an alias like the machine name or make up something in your 'hosts' file (which is why something like localhost.fiddler or http://HOSTNAME works)
If you specify the proxyaddress, you must remove it from your config if Fiddler isn't on, or any requests your app makes will throw an exception like:
No connection could be made because the target machine actively refused it 127.0.0.1:8888
Don't forget to use config transformations to remove the proxy section in production

Answer 5

So simple, all you need is to change the address in the config client: instead of 'localhost' change to the machine name or IP

Answer 6

This is straightforward if you have control over the client that is sending the communications. All you need to do is set the HttpProxy on the client-side service class.
I did this, for example, to trace a web service client running on a smartphone. I set the proxy on that client-side connection to the IP/port of Fiddler, which was running on a PC on the network. The smartphone app then sent all of its outgoing communication to the web service, through Fiddler.
This worked perfectly.
If your client is a WCF client, then see this Q&A for how to set the proxy.
Even if you don't have the ability to modify the code of the client-side app, you may be able to set the proxy administratively, depending on the webservices stack your client uses.

Answer 7

Standard WCF Tracing/Diagnostics
If for some reason you are unable to get Fiddler to work, or would rather log the requests another way, another option is to use the standard WCF tracing functionality. This will produce a file that has a nice viewer.
Docs
See https://learn.microsoft.com/en-us/dotnet/framework/wcf/samples/tracing-and-message-logging
Configuration
Add the following to your config, make sure c:\logs exists, rebuild, and make requests:
<system.serviceModel>
<diagnostics>
<!-- Enable Message Logging here. -->
<!-- log all messages received or sent at the transport or service model levels -->
<messageLogging logEntireMessage="true"
maxMessagesToLog="300"
logMessagesAtServiceLevel="true"
logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
</system.serviceModel>
<system.diagnostics>
<sources>
<source name="System.ServiceModel" switchValue="Information,ActivityTracing"
propagateActivity="true">
<listeners>
<add name="xml" />
</listeners>
</source>
<source name="System.ServiceModel.MessageLogging">
<listeners>
<add name="xml" />
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\logs\TracingAndLogging-client.svclog" type="System.Diagnostics.XmlWriterTraceListener"
name="xml" />
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>

Answer 8

I have used wire shark tool for monitoring service calls from silver light app in browser to service. try the link gives clear info
It enables you to monitor the whole request and response contents.

Answer 9

I just tried the first answer from Brad Rem and came to this setting in the web.config under BasicHttpBinding:
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding bypassProxyOnLocal="False" useDefaultWebProxy="false" proxyAddress="http://127.0.0.1:8888" ...
...
</basicHttpBinding>
</bindings>
...
<system.serviceModel>
Hope this helps someone.

Answer 10

You can use the Free version of HTTP Debugger.
It is not a proxy and you needn't make any changes in web.config.
Also, it can show both; incoming and outgoing HTTP requests.
HTTP Debugger Free

Answer 11

Use fiddler a Reverse Proxy is the final solution for me.
First, configure fiddler as reverse proxy with REGDIT, like the doc said: https://docs.telerik.com/fiddler/configure-fiddler/tasks/usefiddlerasreverseproxy#configure-fiddler-as-reverse-proxy
1)Click Tools > Fiddler Options. Ensure Allow remote clients to connect is checked
2)Create a new DWORD named ReverseProxyForPort inside HKEY_CURRENT_USER\SOFTWARE\Microsoft\Fiddler2.
3)Set the DWORD to the local port where Fiddler will re-route inbound traffic.
4)Restart Fiddler.
Second, change the client to call service through proxy
for example , here is my client app.config:
<client>
<endpoint address="http://localhost:61236/WeatherForecastService.svc"
binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IWeatherForecastService"
contract="ServiceReference1.IWeatherForecastService" name="BasicHttpBinding_IWeatherForecastService" />
</client>
change the client to use proxy endpoint address.
WeatherForecastServiceClient client = new WeatherForecastServiceClient("BasicHttpBinding_IWeatherForecastService", "http://localhost:8888/WeatherForecastService.svc");
var data = client.GetData(1000);
client.Close();

Answer 12

Change the localhost in the URL to localhost.fiddler, this small change worked for me.
Also if anyone testing the service from WCF Test Client don't forget to edit the URL in the config endpoint
Right click on the config file
Click Edit with Svc Config Editor
Click on Endpoints and edit the endpoint to localhost.fiddler
Check Start a new proxy while calling method